Download or read book Modeling Estimation and Control written by Alessandro Chiuso and published by Springer. This book was released on 2007-10-24 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift is intended as a homage to our esteemed colleague, friend and maestro Giorgio Picci on the occasion of his sixty-?fth birthday. We have knownGiorgiosince our undergraduatestudies at the University of Padova, wherewe?rst experiencedhisfascinatingteachingin theclass ofSystem Identi?cation. While progressing through the PhD program, then continuing to collaborate with him and eventually becoming colleagues, we have had many opportunitiesto appreciate the value of Giorgio as a professor and a scientist, and chie?y as a person. We learned a lot from him and we feel indebted for his scienti?c guidance, his constant support, encouragement and enthusiasm. For these reasons we are proud to dedicate this book to Giorgio. The articles in the volume will be presented by prominent researchers at the "--Ternational Conference on Modeling, Estimation and Control: A Symposium in Honor of Giorgio Picci on the Occasion of his Sixty-Fifth Birthday", to be held in Venice on October 4-5, 2007. The material covers a broad range of topics in mathematical systems theory, esti- tion, identi?cation and control, re?ecting the wide network of scienti?c relationships established during the last thirty years between the authors and Giorgio. Critical d- cussion of fundamental concepts, close collaboration on speci?c topics, joint research programs in this group of talented people have nourished the development of the?eld, where Giorgio has contributed to establishing several cornerstones.
Download or read book A Functional Analysis Framework for Modeling Estimation and Control in Science and Engineering written by H.T. Banks and published by CRC Press. This book was released on 2012-06-18 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Modern Framework Based on Time-Tested MaterialA Functional Analysis Framework for Modeling, Estimation and Control in Science and Engineering presents functional analysis as a tool for understanding and treating distributed parameter systems. Drawing on his extensive research and teaching from the past 20 years, the author explains how functional
Download or read book Stochastic Systems for Engineers written by John A. Borrie and published by . This book was released on 1992 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: A self-contained introduction to stochastic systems and an ordered presentation of techniques for computer modelling, filtering and control of these systems. The subject is developed with definition, formulae and explanations but without detailed mathematical proofs.
Download or read book Modeling Estimation and Control of Systems with Uncertainty written by G. B. Dimasi and published by . This book was released on 1991-09-01 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Estimation and Control of Systems with Uncertainty written by G.B. DiMasi and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers that have been presented at the Conference on Modeling and Control of Uncertain Systems held in Sopron, Hungary on September 3-7, 1990, organised within the framework of the activities of the System and Decision Sciences Program of IIASA - the International Institute for Applied Systems Analysis. The importance of the subject has drawn the attention of researchers all over the world since several years. In fact, in most actual applications the knowledge about the system under investigation presents aspects of uncertainty due to measurement errors or poor understanding of the rele vant underlying mechanisms. For this reason models that take into account these intrinsic uncertainties have been used and techniques for the analysis of their behavior as well as for their estimation and control have been devel oped. The main ways to deal with uncertainty consist in its description by stochastic processes or in terms of set-valued dynamics and this volume col lects relevant contributions in both directions. However, in order to avoid undesirable distinctions between these approaches, but on the contrary to stress the unity of ideas, we decided to organize the papers according to the alphabetical order of their authors. We should like to take this opportunity to thank IIASA for supporting the Conference and the Hungarian National Member Organization for the kind hospitality in Sopron. Finally we would like to express our gratitude to Ms. Donna Huchthausen for her valuable secretarial assistance. Vienna, February 20, 1991 GIOVANNI B.
Download or read book A Functional Analysis Framework for Modeling Estimation and Control in Science and Engineering written by H.T. Banks and published by CRC Press. This book was released on 2012-06-18 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Modern Framework Based on Time-Tested Material A Functional Analysis Framework for Modeling, Estimation and Control in Science and Engineering presents functional analysis as a tool for understanding and treating distributed parameter systems. Drawing on his extensive research and teaching from the past 20 years, the author explains how functional analysis can be the basis of modern partial differential equation (PDE) and delay differential equation (DDE) techniques. Recent Examples of Functional Analysis in Biology, Electromagnetics, Materials, and Mechanics Through numerous application examples, the book illustrates the role that functional analysis—a classical subject—continues to play in the rigorous formulation of modern applied areas. The text covers common examples, such as thermal diffusion, transport in tissue, and beam vibration, as well as less traditional ones, including HIV models, uncertainty in noncooperative games, structured population models, electromagnetics in materials, delay systems, and PDEs in control and inverse problems. For some applications, computational aspects are discussed since many problems necessitate a numerical approach.
Download or read book Control in Bioprocessing written by Pablo A. López Pérez and published by John Wiley & Sons. This book was released on 2020-03-03 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closes the gap between bioscience and mathematics-based process engineering This book presents the most commonly employed approaches in the control of bioprocesses. It discusses the role that control theory plays in understanding the mechanisms of cellular and metabolic processes, and presents key results in various fields such as dynamic modeling, dynamic properties of bioprocess models, software sensors designed for the online estimation of parameters and state variables, and control and supervision of bioprocesses Control in Bioengineering and Bioprocessing: Modeling, Estimation and the Use of Sensors is divided into three sections. Part I, Mathematical preliminaries and overview of the control and monitoring of bioprocess, provides a general overview of the control and monitoring of bioprocesses, and introduces the mathematical framework necessary for the analysis and characterization of bioprocess dynamics. Part II, Observability and control concepts, presents the observability concepts which form the basis of design online estimation algorithms (software sensor) for bioprocesses, and reviews controllability of these concepts, including automatic feedback control systems. Part III, Software sensors and observer-based control schemes for bioprocesses, features six application cases including dynamic behavior of 3-dimensional continuous bioreactors; observability analysis applied to 2D and 3D bioreactors with inhibitory and non-inhibitory models; and regulation of a continuously stirred bioreactor via modeling error compensation. Applicable across all areas of bioprocess engineering, including food and beverages, biofuels and renewable energy, pharmaceuticals and nutraceuticals, fermentation systems, product separation technologies, wastewater and solid-waste treatment technology, and bioremediation Provides a clear explanation of the mass-balance–based mathematical modelling of bioprocesses and the main tools for its dynamic analysis Offers industry-based applications on: myco-diesel for implementing "quality" of observability; developing a virtual sensor based on the Just-In-Time Model to monitor biological control systems; and virtual sensor design for state estimation in a photocatalytic bioreactor for hydrogen production Control in Bioengineering and Bioprocessing is intended as a foundational text for graduate level students in bioengineering, as well as a reference text for researchers, engineers, and other practitioners interested in the field of estimation and control of bioprocesses.
Download or read book Modeling Estimation and Control of a Two dimensional Intercept System written by Kai-Bor Yu and published by . This book was released on 1979 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Estimation and Control of Systems with Uncertainty written by Giovanni B. Di Masi and published by . This book was released on 1991 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Estimation and Control for Business and Economic Systems written by S. Constantin Abena-Ondoa and published by . This book was released on 1978 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Estimation and Control of Power Systems written by Abhinav Kumar Singh and published by Academic Press. This book was released on 2018-10-04 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic estimation and control is a fast growing and widely researched field of study that lays the foundation for a new generation of technologies that can dynamically, adaptively and automatically stabilize power systems. This book provides a comprehensive introduction to research techniques for real-time estimation and control of power systems. Dynamic Estimation and Control of Power Systems coherently and concisely explains key concepts in a step by step manner, beginning with the fundamentals and building up to the latest developments of the field. Each chapter features examples to illustrate the main ideas, and effective research tools are presented for signal processing-based estimation of the dynamic states and subsequent control, both centralized and decentralized, as well as linear and nonlinear. Detailed mathematical proofs are included for readers who desire a deeper technical understanding of the methods. This book is an ideal research reference for engineers and researchers working on monitoring and stability of modern grids, as well as postgraduate students studying these topics. It serves to deliver a clear understanding of the tools needed for estimation and control, while also acting as a basis for readers to further develop new and improved approaches in their own research. Offers the first concise, single resource on dynamic estimation and control of power systems Provides both an understanding of estimation and control concepts and a comparison of results Includes detailed case-studies, including MATLAB codes, to explain and demonstrate the concepts presented
Download or read book Frequency Variations in Power Systems written by Federico Milano and published by John Wiley & Sons. This book was released on 2020-08-03 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frequency Variations in Power Systems: Modeling, State Estimation and Control presents the Frequency Divider Formula (FDF); a unique approach that defines, calculates and estimates the frequency in electrical energy systems. This authoritative book is written by two noted researchers on the topic. They define the meaning of frequency of an electrical quantity (such as voltage and current) in non-stationary conditions (for example the frequency is not equal to the nominal one) and pose the foundation of the frequency divider formula. The book describes the consequences of using a variable frequency in power system modelling and simulations, in state estimation and frequency control applications. In addition, the authors include a discussion on the applications of the frequency divider in systems where part of the generation is not based on synchronous machines, but rather on converter-interfaced energy resources, such as wind and solar power plants. This important book: Offers a review that clearly defines and shows how the Frequency Divider Formula can be applied Discusses the link between frequency and energy in power systems Presents a unified vision that accurately reveals the common thread that links modelling, control and estimation Includes information on the many implications that “local frequency variations” have on power system dynamics and control Contains several numerical examples Written for researchers, academic staff members, students, specialised consultants and professional software developers, Frequency Variations in Power Systems questions the conventional transient stability model of power system and proposes a new formulation.
Download or read book Modeling Estimation and Control in Systems with Random Failure of Sensors and Actuators written by Wenjing Zhang (M.S.) and published by . This book was released on 2007 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Material Structures written by H. Thomas Banks and published by Elsevier Masson. This book was released on 1996 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this monograph, mathematical and computational investigations pertinent to scientific and engineering issues in the emerging field of smart materials are presented. A brief survey of basic mechanisms and questions related to various components (piezoelectric and electrostrictive elements, magnetostrictive transducers, ER fluids, shape memory alloys, fiber optics) of smart material structures is given. Attention is then focused on piezoceramic actuators and sensors. Care is given to the precise modeling of piezoceramic patch contributions (passive and active) in structures such as thin shells, plates and beams. Mathematical foundations for well-posedness, approximation, inverse problem and parameter estimation, and feedback control methodologies are discussed. Applications, including experimental validation of the efficacy of the ideas, are presented in the context of damage detection and characterization in structures, and in active control of structural vibrations and structure-borne noise.
Download or read book Control in Bioprocessing written by Pablo A. López Pérez and published by John Wiley & Sons. This book was released on 2020-06-08 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closes the gap between bioscience and mathematics-based process engineering This book presents the most commonly employed approaches in the control of bioprocesses. It discusses the role that control theory plays in understanding the mechanisms of cellular and metabolic processes, and presents key results in various fields such as dynamic modeling, dynamic properties of bioprocess models, software sensors designed for the online estimation of parameters and state variables, and control and supervision of bioprocesses Control in Bioengineering and Bioprocessing: Modeling, Estimation and the Use of Sensors is divided into three sections. Part I, Mathematical preliminaries and overview of the control and monitoring of bioprocess, provides a general overview of the control and monitoring of bioprocesses, and introduces the mathematical framework necessary for the analysis and characterization of bioprocess dynamics. Part II, Observability and control concepts, presents the observability concepts which form the basis of design online estimation algorithms (software sensor) for bioprocesses, and reviews controllability of these concepts, including automatic feedback control systems. Part III, Software sensors and observer-based control schemes for bioprocesses, features six application cases including dynamic behavior of 3-dimensional continuous bioreactors; observability analysis applied to 2D and 3D bioreactors with inhibitory and non-inhibitory models; and regulation of a continuously stirred bioreactor via modeling error compensation. Applicable across all areas of bioprocess engineering, including food and beverages, biofuels and renewable energy, pharmaceuticals and nutraceuticals, fermentation systems, product separation technologies, wastewater and solid-waste treatment technology, and bioremediation Provides a clear explanation of the mass-balance–based mathematical modelling of bioprocesses and the main tools for its dynamic analysis Offers industry-based applications on: myco-diesel for implementing "quality" of observability; developing a virtual sensor based on the Just-In-Time Model to monitor biological control systems; and virtual sensor design for state estimation in a photocatalytic bioreactor for hydrogen production Control in Bioengineering and Bioprocessing is intended as a foundational text for graduate level students in bioengineering, as well as a reference text for researchers, engineers, and other practitioners interested in the field of estimation and control of bioprocesses.
Download or read book Modeling Control Estimation and Optimization for Microgrids written by Zhixiong Zhong and published by CRC Press. This book was released on 2019-10-28 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to increasing economic and environmental pressures, small-scale grids have received increasing attention in the last fifteen years. These renewable sources, such as solar PVs, wind turbines, and fuel cells, integrated with grid, have changed the way we live our lives. This book describes microgrid dynamics modeling and nonlinear control issues from introductory to the advanced steps. The book addresses the most relevant challenges in microgrid protection and control including modeling, uncertainty, stability issues, local control, coordination control, power quality, and economic dispatch.
Download or read book Smart Material Structures written by H. Thomas Banks and published by Elsevier Masson. This book was released on 1996 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this monograph, mathematical and computational investigations pertinent to scientific and engineering issues in the emerging field of smart materials are presented. A brief survey of basic mechanisms and questions related to various components (piezoelectric and electrostrictive elements, magnetostrictive transducers, ER fluids, shape memory alloys, fiber optics) of smart material structures is given. Attention is then focused on piezoceramic actuators and sensors. Care is given to the precise modeling of piezoceramic patch contributions (passive and active) in structures such as thin shells, plates and beams. Mathematical foundations for well-posedness, approximation, inverse problem and parameter estimation, and feedback control methodologies are discussed. Applications, including experimental validation of the efficacy of the ideas, are presented in the context of damage detection and characterization in structures, and in active control of structural vibrations and structure-borne noise.
