Download or read book Modeling Design and Simulation of Systems with Uncertainties written by Andreas Rauh and published by Springer Science & Business Media. This book was released on 2011-06-06 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: To describe the true behavior of most real-world systems with sufficient accuracy, engineers have to overcome difficulties arising from their lack of knowledge about certain parts of a process or from the impossibility of characterizing it with absolute certainty. Depending on the application at hand, uncertainties in modeling and measurements can be represented in different ways. For example, bounded uncertainties can be described by intervals, affine forms or general polynomial enclosures such as Taylor models, whereas stochastic uncertainties can be characterized in the form of a distribution described, for example, by the mean value, the standard deviation and higher-order moments. The goal of this Special Volume on Modeling, Design, and Simulation of Systems with Uncertainties is to cover modern methods for dealing with the challenges presented by imprecise or unavailable information. All contributions tackle the topic from the point of view of control, state and parameter estimation, optimization and simulation. Thematically, this volume can be divided into two parts. In the first we present works highlighting the theoretic background and current research on algorithmic approaches in the field of uncertainty handling, together with their reliable software implementation. The second part is concerned with real-life application scenarios from various areas including but not limited to mechatronics, robotics, and biomedical engineering.
Download or read book System Design Modeling and Simulation written by Claudius Ptolemaeus and published by Lee & Seshia. This book was released on 2013-09-27 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a definitive introduction to models of computation for the design of complex, heterogeneous systems. It has a particular focus on cyber-physical systems, which integrate computing, networking, and physical dynamics. The book captures more than twenty years of experience in the Ptolemy Project at UC Berkeley, which pioneered many design, modeling, and simulation techniques that are now in widespread use. All of the methods covered in the book are realized in the open source Ptolemy II modeling framework and are available for experimentation through links provided in the book. The book is suitable for engineers, scientists, researchers, and managers who wish to understand the rich possibilities offered by modern modeling techniques. The goal of the book is to equip the reader with a breadth of experience that will help in understanding the role that such techniques can play in design.
Download or read book Modeling Design and Simulation of Systems written by Mohamed Sultan Mohamed Ali and published by Springer. This book was released on 2017-08-24 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set CCIS 751 and CCIS 752 constitutes the proceedings of the 17th Asia Simulation Conference, AsiaSim 2017, held in Malacca, Malaysia, in August/September 2017. The 124 revised full papers presented in this two-volume set were carefully reviewed and selected from 267 submissions. The papers contained in these proceedings address challenging issues in modeling and simulation in various fields such as embedded systems; symbiotic simulation; agent-based simulation; parallel and distributed simulation; high performance computing; biomedical engineering; big data; energy, society and economics; medical processes; simulation language and software; visualization; virtual reality; modeling and Simulation for IoT; machine learning; as well as the fundamentals and applications of computing.
Download or read book Numerical Simulation based Design written by Xu Han and published by . This book was released on 2020 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on numerical simulation-based design theory and methods in mechanical engineering. The simulation-based design of mechanical equipment involves considerable scientific challenges including extremely complex systems, extreme working conditions, multi-source uncertainties, multi-physics coupling, and large-scale computation. In order to overcome these technical difficulties, this book systematically elaborates upon the advanced design methods, covering high-fidelity simulation modeling, rapid structural analysis, multi-objective design optimization, uncertainty analysis and optimization, which can effectively improve the design accuracy, efficiency, multi-functionality and reliability of complicated mechanical structures. This book is primarily intended for researchers, engineers and postgraduate students in mechanical engineering, especially in mechanical design, numerical simulation and engineering optimization.
Download or read book Uncertainty Modeling for Engineering Applications written by Flavio Canavero and published by Springer. This book was released on 2018-12-29 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of state-of-the-art uncertainty quantification (UQ) methodologies and applications, and covers a wide range of current research, future challenges and applications in various domains, such as aerospace and mechanical applications, structure health and seismic hazard, electromagnetic energy (its impact on systems and humans) and global environmental state change. Written by leading international experts from different fields, the book demonstrates the unifying property of UQ theme that can be profitably adopted to solve problems of different domains. The collection in one place of different methodologies for different applications has the great value of stimulating the cross-fertilization and alleviate the language barrier among areas sharing a common background of mathematical modeling for problem solution. The book is designed for researchers, professionals and graduate students interested in quantitatively assessing the effects of uncertainties in their fields of application. The contents build upon the workshop “Uncertainty Modeling for Engineering Applications” (UMEMA 2017), held in Torino, Italy in November 2017.
Download or read book Process Control written by B. Wayne Bequette and published by Prentice Hall Professional. This book was released on 2003 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master process control hands on, through practical examples and MATLAB(R) simulations This is the first complete introduction to process control that fully integrates software tools--enabling professionals and students to master critical techniques hands on, through computer simulations based on the popular MATLAB environment. Process Control: Modeling, Design, and Simulation teaches the field's most important techniques, behaviors, and control problems through practical examples, supplemented by extensive exercises--with detailed derivations, relevant software files, and additional techniques available on a companion Web site. Coverage includes: Fundamentals of process control and instrumentation, including objectives, variables, and block diagrams Methodologies for developing dynamic models of chemical processes Dynamic behavior of linear systems: state space models, transfer function-based models, and more Feedback control; proportional, integral, and derivative (PID) controllers; and closed-loop stability analysis Frequency response analysis techniques for evaluating the robustness of control systems Improving control loop performance: internal model control (IMC), automatic tuning, gain scheduling, and enhancements to improve disturbance rejection Split-range, selective, and override strategies for switching among inputs or outputs Control loop interactions and multivariable controllers An introduction to model predictive control (MPC) Bequette walks step by step through the development of control instrumentation diagrams for an entire chemical process, reviewing common control strategies for individual unit operations, then discussing strategies for integrated systems. The book also includes 16 learning modules demonstrating how to use MATLAB and SIMULINK to solve several key control problems, ranging from robustness analyses to biochemical reactors, biomedical problems to multivariable control.
Download or read book Dynamics Under Uncertainty Modeling Simulation and Complexity written by Dragan Pamučar and published by . This book was released on 2021 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: The dynamics of systems have proven to be very powerful tools in understanding the behavior of different natural phenomena throughout the last two centuries. However, the attributes of natural systems are observed to deviate from their classical states due to the effect of different types of uncertainties. Actually, randomness and impreciseness are the two major sources of uncertainties in natural systems. Randomness is modeled by different stochastic processes and impreciseness could be modeled by fuzzy sets, rough sets, Dempster-Shafer theory, etc.
Download or read book Research Challenges in Modeling and Simulation for Engineering Complex Systems written by Richard Fujimoto and published by Springer. This book was released on 2017-08-18 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This illuminating text/reference presents a review of the key aspects of the modeling and simulation (M&S) life cycle, and examines the challenges of M&S in different application areas. The authoritative work offers valuable perspectives on the future of research in M&S, and its role in engineering complex systems. Topics and features: reviews the challenges of M&S for urban infrastructure, healthcare delivery, automated vehicle manufacturing, deep space missions, and acquisitions enterprise; outlines research issues relating to conceptual modeling, covering the development of explicit and unambiguous models, communication and decision-making, and architecture and services; considers key computational challenges in the execution of simulation models, in order to best exploit emerging computing platforms and technologies; examines efforts to understand and manage uncertainty inherent in M&S processes, and how these can be unified under a consistent theoretical and philosophical foundation; discusses the reuse of models and simulations to accelerate the simulation model development process. This thought-provoking volume offers important insights for all researchers involved in modeling and simulation across the full spectrum of disciplines and applications, defining a common research agenda to support the entire M&S research community.
Download or read book Uncertainty Quantification in Multiscale Materials Modeling written by Yan Wang and published by Woodhead Publishing Limited. This book was released on 2020-03-12 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uncertainty Quantification in Multiscale Materials Modeling provides a complete overview of uncertainty quantification (UQ) in computational materials science. It provides practical tools and methods along with examples of their application to problems in materials modeling. UQ methods are applied to various multiscale models ranging from the nanoscale to macroscale. This book presents a thorough synthesis of the state-of-the-art in UQ methods for materials modeling, including Bayesian inference, surrogate modeling, random fields, interval analysis, and sensitivity analysis, providing insight into the unique characteristics of models framed at each scale, as well as common issues in modeling across scales.
Download or read book Uncertainty Quantification and Predictive Computational Science written by Ryan G. McClarren and published by Springer. This book was released on 2018-11-23 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook teaches the essential background and skills for understanding and quantifying uncertainties in a computational simulation, and for predicting the behavior of a system under those uncertainties. It addresses a critical knowledge gap in the widespread adoption of simulation in high-consequence decision-making throughout the engineering and physical sciences. Constructing sophisticated techniques for prediction from basic building blocks, the book first reviews the fundamentals that underpin later topics of the book including probability, sampling, and Bayesian statistics. Part II focuses on applying Local Sensitivity Analysis to apportion uncertainty in the model outputs to sources of uncertainty in its inputs. Part III demonstrates techniques for quantifying the impact of parametric uncertainties on a problem, specifically how input uncertainties affect outputs. The final section covers techniques for applying uncertainty quantification to make predictions under uncertainty, including treatment of epistemic uncertainties. It presents the theory and practice of predicting the behavior of a system based on the aggregation of data from simulation, theory, and experiment. The text focuses on simulations based on the solution of systems of partial differential equations and includes in-depth coverage of Monte Carlo methods, basic design of computer experiments, as well as regularized statistical techniques. Code references, in python, appear throughout the text and online as executable code, enabling readers to perform the analysis under discussion. Worked examples from realistic, model problems help readers understand the mechanics of applying the methods. Each chapter ends with several assignable problems. Uncertainty Quantification and Predictive Computational Science fills the growing need for a classroom text for senior undergraduate and early-career graduate students in the engineering and physical sciences and supports independent study by researchers and professionals who must include uncertainty quantification and predictive science in the simulations they develop and/or perform.
Download or read book Statistics Testing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 1999-08-17 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Panel on Statistical Methods for Testing and Evaluating Defense Systems had a broad mandate-to examine the use of statistics in conjunction with defense testing. This involved examining methods for software testing, reliability test planning and estimation, validation of modeling and simulation, and use of modem techniques for experimental design. Given the breadth of these areas, including the great variety of applications and special issues that arise, making a contribution in each of these areas required that the Panel's work and recommendations be at a relatively general level. However, a variety of more specific research issues were either brought to the Panel's attention by members of the test and acquisition community, e.g., what was referred to as Dubin's challenge (addressed in the Panel's interim report), or were identified by members of the panel. In many of these cases the panel thought that a more in-depth analysis or a more detailed application of suggestions or recommendations made by the Panel would either be useful as input to its deliberations or could be used to help communicate more individual views of members of the Panel to the defense test community. This resulted in several research efforts. Given various criteria, especially immediate relevance to the test and acquisition community, the Panel has decided to make available three technical or background papers, each authored by a Panel member jointly with a colleague. These papers are individual contributions and are not a consensus product of the Panel; however, the Panel has drawn from these papers in preparation of its final report: Statistics, Testing, and Defense Acquisition. The Panel has found each of these papers to be extremely useful and they are strongly recommended to readers of the Panel's final report.
Download or read book Uncertainty Assessment of Large Finite Element Systems written by Christian A. Schenk and published by Springer Science & Business Media. This book was released on 2005-06-08 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The treatment of uncertainties in the analysis of engineering structures remains one of the premium challenges in modern structural mechanics. It is only in recent years that the developments in stochastic and deterministic computational mechanics began to be synchronized. To foster these developments, novel computational procedures for the uncertainty assessment of large finite element systems are presented in this monograph. The stochastic input is modeled by the so-called Karhunen-Loève expansion, which is formulated in this context both for scalar and vector stochastic processes as well as for random fields. Particularly for strongly non-linear structures and systems the direct Monte Carlo simulation technique has proven to be most advantageous as method of solution. The capabilities of the developed procedures are demonstrated by showing some practical applications.
Download or read book Modeling and Simulation in the Systems Engineering Life Cycle written by Margaret L. Loper and published by Springer. This book was released on 2015-04-30 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This easy to read text provides a broad introduction to the fundamental concepts of modeling and simulation (M&S) and systems engineering, highlighting how M&S is used across the entire systems engineering lifecycle. Features: reviews the full breadth of technologies, methodologies and uses of M&S, rather than just focusing on a specific aspect of the field; presents contributions from specialists in each topic covered; introduces the foundational elements and processes that serve as the groundwork for understanding M&S; explores common methods and methodologies used in M&S; discusses how best to design and execute experiments, covering the use of Monte Carlo techniques, surrogate modeling and distributed simulation; explores the use of M&S throughout the systems development lifecycle, describing a number of methods, techniques, and tools available to support systems engineering processes; provides a selection of case studies illustrating the use of M&S in systems engineering across a variety of domains.
Download or read book Advances in Modeling and Simulation written by Andreas Tolk and published by Springer. This book was released on 2017-08-27 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This broad-ranging text/reference presents a fascinating review of the state of the art of modeling and simulation, highlighting both the seminal work of preeminent authorities and exciting developments from promising young researchers in the field. Celebrating the 50th anniversary of the Winter Simulation Conference (WSC), the premier international forum for disseminating recent advances in the field of system simulation, the book showcases the historical importance of this influential conference while also looking forward to a bright future for the simulation community. Topics and features: examines the challenge of constructing valid and efficient models, emphasizing the benefits of the process of simulation modeling; discusses model calibration, input model risk, and approaches to validating emergent behaviors in large-scale complex systems with non-linear interactions; reviews the evolution of simulation languages, and the history of the Time Warp algorithm; offers a focus on the design and analysis of simulation experiments under various goals, and describes how data can be “farmed” to support decision making; provides a comprehensive overview of Bayesian belief models for simulation-based decision making, and introduces a model for ranking and selection in cloud computing; highlights how input model uncertainty impacts simulation optimization, and proposes an approach to quantify and control the impact of input model risk; surveys the applications of simulation in semiconductor manufacturing, in social and behavioral modeling, and in military planning and training; presents data analysis on the publications from the Winter Simulation Conference, offering a big-data perspective on the significant impact of the conference. This informative and inspiring volume will appeal to all academics and professionals interested in computational and mathematical modeling and simulation, as well as to graduate students on the path to form the next generation of WSC pioneers.
Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.
Download or read book Modelling Under Risk and Uncertainty written by Etienne de Rocquigny and published by John Wiley & Sons. This book was released on 2012-04-12 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling has permeated virtually all areas of industrial, environmental, economic, bio-medical or civil engineering: yet the use of models for decision-making raises a number of issues to which this book is dedicated: How uncertain is my model ? Is it truly valuable to support decision-making ? What kind of decision can be truly supported and how can I handle residual uncertainty ? How much refined should the mathematical description be, given the true data limitations ? Could the uncertainty be reduced through more data, increased modeling investment or computational budget ? Should it be reduced now or later ? How robust is the analysis or the computational methods involved ? Should / could those methods be more robust ? Does it make sense to handle uncertainty, risk, lack of knowledge, variability or errors altogether ? How reasonable is the choice of probabilistic modeling for rare events ? How rare are the events to be considered ? How far does it make sense to handle extreme events and elaborate confidence figures ? Can I take advantage of expert / phenomenological knowledge to tighten the probabilistic figures ? Are there connex domains that could provide models or inspiration for my problem ? Written by a leader at the crossroads of industry, academia and engineering, and based on decades of multi-disciplinary field experience, Modelling Under Risk and Uncertainty gives a self-consistent introduction to the methods involved by any type of modeling development acknowledging the inevitable uncertainty and associated risks. It goes beyond the “black-box” view that some analysts, modelers, risk experts or statisticians develop on the underlying phenomenology of the environmental or industrial processes, without valuing enough their physical properties and inner modelling potential nor challenging the practical plausibility of mathematical hypotheses; conversely it is also to attract environmental or engineering modellers to better handle model confidence issues through finer statistical and risk analysis material taking advantage of advanced scientific computing, to face new regulations departing from deterministic design or support robust decision-making. Modelling Under Risk and Uncertainty: Addresses a concern of growing interest for large industries, environmentalists or analysts: robust modeling for decision-making in complex systems. Gives new insights into the peculiar mathematical and computational challenges generated by recent industrial safety or environmental control analysis for rare events. Implements decision theory choices differentiating or aggregating the dimensions of risk/aleatory and epistemic uncertainty through a consistent multi-disciplinary set of statistical estimation, physical modelling, robust computation and risk analysis. Provides an original review of the advanced inverse probabilistic approaches for model identification, calibration or data assimilation, key to digest fast-growing multi-physical data acquisition. Illustrated with one favourite pedagogical example crossing natural risk, engineering and economics, developed throughout the book to facilitate the reading and understanding. Supports Master/PhD-level course as well as advanced tutorials for professional training Analysts and researchers in numerical modeling, applied statistics, scientific computing, reliability, advanced engineering, natural risk or environmental science will benefit from this book.
Download or read book Thermal System Design and Simulation written by P.L. Dhar and published by Academic Press. This book was released on 2016-10-25 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal System Design and Simulation covers the fundamental analyses of thermal energy systems that enable users to effectively formulate their own simulation and optimal design procedures. This reference provides thorough guidance on how to formulate optimal design constraints and develop strategies to solve them with minimal computational effort. The book uniquely illustrates the methodology of combining information flow diagrams to simplify system simulation procedures needed in optimal design. It also includes a comprehensive presentation on dynamics of thermal systems and the control systems needed to ensure safe operation at varying loads. Designed to give readers the skills to develop their own customized software for simulating and designing thermal systems, this book is relevant for anyone interested in obtaining an advanced knowledge of thermal system analysis and design. Contains detailed models of simulation for equipment in the most commonly used thermal engineering systems Features illustrations for the methodology of using information flow diagrams to simplify system simulation procedures Includes comprehensive global case studies of simulation and optimization of thermal systems
