Download or read book Silicon Carbide Power Devices written by B. Jayant Baliga and published by World Scientific. This book was released on 2006-01-05 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power semiconductor devices are widely used for the control and management of electrical energy. The improving performance of power devices has enabled cost reductions and efficiency increases resulting in lower fossil fuel usage and less environmental pollution. This book provides the first cohesive treatment of the physics and design of silicon carbide power devices with an emphasis on unipolar structures. It uses the results of extensive numerical simulations to elucidate the operating principles of these important devices. Sample Chapter(s). Chapter 1: Introduction (72 KB). Contents: Material Properties and Technology; Breakdown Voltage; PiN Rectifiers; Schottky Rectifiers; Shielded Schottky Rectifiers; Metal-Semiconductor Field Effect Transistors; The Baliga-Pair Configuration; Planar Power MOSFETs; Shielded Planar MOSFETs; Trench-Gate Power MOSFETs; Shielded Trendch-Gate MOSFETs; Charge Coupled Structures; Integral Diodes; Lateral High Voltage FETs; Synopsis. Readership: For practising engineers working on power devices, and as a supplementary textbook for a graduate level course on power devices.

Download or read book Real Time Simulation Technology for Modern Power Electronics written by Hao Bai and published by Elsevier. This book was released on 2023-05-19 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-Time Simulation Technology for Modern Power Electronics provides an invaluable foundation and state-of-the-art review on the most advanced implementations of real-time simulation as it appears poised to revolutionize the modeling of power electronics. The book opens with a discussion of power electronics device physic modeling, component modeling, and power converter modeling before addressing numerical methods to solve converter model, emphasizing speed and accuracy. It discusses both CPU-based and FPGA-based real-time implementations and provides an extensive review of current applications, including hardware-in-the-loop and its case studies in the micro-grid and electric vehicle applications. The book closes with a review of the near and long-term outlooks for the evolving technology. Collectively, the work provides a systematic resource for students, researchers, and engineers in the electrical engineering and other closely related fields. - Introduces the theoretical building blocks of real-time power electronic simulation through advanced modern implementations - Includes modern case studies and implementations across diverse applications, including electric vehicle component testing and microgrid controller testing - Discusses FPGA-based real-time simulation techniques complete with illustrative examples, comparisons with CPU-based simulation, computational performance and co-simulation architectures

Download or read book RF Power Amplifiers written by Marian K. Kazimierczuk and published by John Wiley & Sons. This book was released on 2014-11-26 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the highly acclaimed RF Power Amplifiers has been thoroughly revised and expanded to reflect the latest challenges associated with power transmitters used in communications systems. With more rigorous treatment of many concepts, the new edition includes a unique combination of class-tested analysis and industry-proven design techniques. Radio frequency (RF) power amplifiers are the fundamental building blocks used in a vast variety of wireless communication circuits, radio and TV broadcasting transmitters, radars, wireless energy transfer, and industrial processes. Through a combination of theory and practice, RF Power Amplifiers, Second Edition provides a solid understanding of the key concepts, the principle of operation, synthesis, analysis, and design of RF power amplifiers. This extensive update boasts: up to date end of chapter summaries; review questions and problems; an expansion on key concepts; new examples related to real-world applications illustrating key concepts and brand new chapters covering ‘hot topics’ such as RF LC oscillators and dynamic power supplies. Carefully edited for superior readability, this work remains an essential reference for research & development staff and design engineers. Senior level undergraduate and graduate electrical engineering students will also find it an invaluable resource with its practical examples & summaries, review questions and end of chapter problems. Key features: • A fully revised solutions manual is now hosted on a companion website alongside new simulations. • Extended treatment of a broad range of topologies of RF power amplifiers. • In-depth treatment of state-of-the art of modern transmitters and a new chapter on oscillators. • Includes problem-solving methodology, step-by-step derivations and closed-form design equations with illustrations.

Download or read book Wide Bandgap Semiconductor Power Devices written by B. Jayant Baliga and published by Woodhead Publishing. This book was released on 2018-10-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wide Bandgap Semiconductor Power Devices: Materials, Physics, Design and Applications provides readers with a single resource on why these devices are superior to existing silicon devices. The book lays the groundwork for an understanding of an array of applications and anticipated benefits in energy savings. Authored by the Founder of the Power Semiconductor Research Center at North Carolina State University (and creator of the IGBT device), Dr. B. Jayant Baliga is one of the highest regarded experts in the field. He thus leads this team who comprehensively review the materials, device physics, design considerations and relevant applications discussed. - Comprehensively covers power electronic devices, including materials (both gallium nitride and silicon carbide), physics, design considerations, and the most promising applications - Addresses the key challenges towards the realization of wide bandgap power electronic devices, including materials defects, performance and reliability - Provides the benefits of wide bandgap semiconductors, including opportunities for cost reduction and social impact

Download or read book GaN Transistors for Efficient Power Conversion written by Alex Lidow and published by John Wiley & Sons. This book was released on 2019-08-12 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date, practical guide on upgrading from silicon to GaN, and how to use GaN transistors in power conversion systems design This updated, third edition of a popular book on GaN transistors for efficient power conversion has been substantially expanded to keep students and practicing power conversion engineers ahead of the learning curve in GaN technology advancements. Acknowledging that GaN transistors are not one-to-one replacements for the current MOSFET technology, this book serves as a practical guide for understanding basic GaN transistor construction, characteristics, and applications. Included are discussions on the fundamental physics of these power semiconductors, layout, and other circuit design considerations, as well as specific application examples demonstrating design techniques when employing GaN devices. GaN Transistors for Efficient Power Conversion, 3rd Edition brings key updates to the chapters of Driving GaN Transistors; Modeling, Simulation, and Measurement of GaN Transistors; DC-DC Power Conversion; Envelope Tracking; and Highly Resonant Wireless Energy Transfer. It also offers new chapters on Thermal Management, Multilevel Converters, and Lidar, and revises many others throughout. Written by leaders in the power semiconductor field and industry pioneers in GaN power transistor technology and applications Updated with 35% new material, including three new chapters on Thermal Management, Multilevel Converters, Wireless Power, and Lidar Features practical guidance on formulating specific circuit designs when constructing power conversion systems using GaN transistors A valuable resource for professional engineers, systems designers, and electrical engineering students who need to fully understand the state-of-the-art GaN Transistors for Efficient Power Conversion, 3rd Edition is an essential learning tool and reference guide that enables power conversion engineers to design energy-efficient, smaller, and more cost-effective products using GaN transistors.

Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.

Download or read book Proceedings of the 7th International Conference on the Applications of Science and Mathematics 2021 written by Aida Binti Mustapha and published by Springer Nature. This book was released on 2022-06-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents peer-reviewed articles and recent advances on the potential applications of Science and Mathematics for future technologies, from the 7th International Conference on the Applications of Science and Mathematics (SCIEMATHIC 2021), held in Malaysia. It provides an insight about the leading trends in sustainable Science and Technology. The world is looking for sustainable solutions to problems more than ever. The synergistic approach of mathematicians, scientists and engineers has undeniable importance for future technologies. With this viewpoint, SCIEMATHIC 2021 has the theme “Quest for Sustainable Science and Mathematics for Future Technologies”. The conference brings together physicists, mathematicians, statisticians and data scientists, providing a platform to find sustainable solutions to major problems around us. The works presented here are suitable for professionals and researchers globally in making the world a better and sustainable place.

Download or read book Characterization of Wide Bandgap Power Semiconductor Devices written by Fei Wang and published by Institution of Engineering and Technology. This book was released on 2018-09-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the heart of modern power electronics converters are power semiconductor switching devices. The emergence of wide bandgap (WBG) semiconductor devices, including silicon carbide and gallium nitride, promises power electronics converters with higher efficiency, smaller size, lighter weight, and lower cost than converters using the established silicon-based devices. However, WBG devices pose new challenges for converter design and require more careful characterization, in particular due to their fast switching speed and more stringent need for protection.

Download or read book High Frequency GaN Electronic Devices written by Patrick Fay and published by Springer. This book was released on 2019-08-01 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together recent research by scientists and device engineers working on both aggressively-scaled conventional transistors as well as unconventional high-frequency device concepts in the III-N material system. Device concepts for mm-wave to THz operation based on deeply-scaled HEMTs, as well as distributed device designs based on plasma-wave propagation in polarization-induced 2DEG channels, tunneling, and hot-carrier injection are discussed in detail. In addition, advances in the underlying materials science that enable these demonstrations, and advancements in metrology that permit the accurate characterization and evaluation of these emerging device concepts are also included. Targeting readers looking to push the envelope in GaN-based electronics device research, this book provides a current, comprehensive treatment of device concepts and physical phenomenology suitable for applying GaN and related materials to emerging ultra-high-frequency applications. Offers readers an integrated treatment of the state of the art in both conventional (i.e., HEMT) scaling as well as unconventional device architectures suitable for amplification and signal generation in the mm-wave and THz regime using GaN-based devices, written by authors that are active and widely-known experts in the field; Discusses both conventional scaled HEMTs (into the deep mm-wave) as well as unconventional approaches to address the mm-wave and THz regimes; Provides “vertically integrated” coverage, including materials science that enables these recent advances, as well as device physics & design, and metrology techniques; Includes fundamental physics, as well as numerical simulations and experimental realizations.

Download or read book Technology Computer Aided Design written by Chandan Kumar Sarkar and published by CRC Press. This book was released on 2018-09-03 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responding to recent developments and a growing VLSI circuit manufacturing market, Technology Computer Aided Design: Simulation for VLSI MOSFET examines advanced MOSFET processes and devices through TCAD numerical simulations. The book provides a balanced summary of TCAD and MOSFET basic concepts, equations, physics, and new technologies related to TCAD and MOSFET. A firm grasp of these concepts allows for the design of better models, thus streamlining the design process, saving time and money. This book places emphasis on the importance of modeling and simulations of VLSI MOS transistors and TCAD software. Providing background concepts involved in the TCAD simulation of MOSFET devices, it presents concepts in a simplified manner, frequently using comparisons to everyday-life experiences. The book then explains concepts in depth, with required mathematics and program code. This book also details the classical semiconductor physics for understanding the principle of operations for VLSI MOS transistors, illustrates recent developments in the area of MOSFET and other electronic devices, and analyzes the evolution of the role of modeling and simulation of MOSFET. It also provides exposure to the two most commercially popular TCAD simulation tools Silvaco and Sentaurus. • Emphasizes the need for TCAD simulation to be included within VLSI design flow for nano-scale integrated circuits • Introduces the advantages of TCAD simulations for device and process technology characterization • Presents the fundamental physics and mathematics incorporated in the TCAD tools • Includes popular commercial TCAD simulation tools (Silvaco and Sentaurus) • Provides characterization of performances of VLSI MOSFETs through TCAD tools • Offers familiarization to compact modeling for VLSI circuit simulation R&D cost and time for electronic product development is drastically reduced by taking advantage of TCAD tools, making it indispensable for modern VLSI device technologies. They provide a means to characterize the MOS transistors and improve the VLSI circuit simulation procedure. The comprehensive information and systematic approach to design, characterization, fabrication, and computation of VLSI MOS transistor through TCAD tools presented in this book provides a thorough foundation for the development of models that simplify the design verification process and make it cost effective.

Download or read book Materials Characterisation VII written by C.A. Brebbia and published by WIT Press. This book was released on 2015-04-22 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing papers presented at the Seventh International Conference on Materials Characterisation, this book presents the latest advances in a rapidly developing field that requires the application of a combination of numerical and experimental methods. The work has been contributed by researchers who use computational methods, those who perform experiments, and those who combine both. Materials characterisation is important to ensuring that new products meet the needs of industry and consumers. The accurate characterisation of the physical and chemical properties of the materials requires the application of both experimental techniques and computer simulation methods. The wide range of materials now available, from metals to polymers and semiconductors to composites, necessitates a variety of experimental techniques and numerical methods. The papers in the book examine various combinations of techniques. The papers cover such topics as: Mechanical Characterisation and Testing; Micro and Macro Materials Characterisation; Cementitious Materials; Advances in Composites; Semiconductor Materials Characterisation; Computational Models and Experiments; Corrosion Problems.

Download or read book Compound Semiconductor written by and published by . This book was released on 2003 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Electronics Device Applications of Diamond Semiconductors written by Satoshi Koizumi and published by Woodhead Publishing. This book was released on 2018-06-29 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Device Applications of Diamond Semiconductors presents state-of-the-art research on diamond growth, doping, device processing, theoretical modeling and device performance. The book begins with a comprehensive and close examination of diamond crystal growth from the vapor phase for epitaxial diamond and wafer preparation. It looks at single crystal vapor deposition (CVD) growth sectors and defect control, ultra high purity SC-CVD, SC diamond wafer CVD, heteroepitaxy on Ir/MqO and needle-induced large area growth, also discussing the latest doping and semiconductor characterization methods, fundamental material properties and device physics. The book concludes with a discussion of circuits and applications, featuring the switching behavior of diamond devices and applications, high frequency and high temperature operation, and potential applications of diamond semiconductors for high voltage devices. - Includes contributions from today's most respected researchers who present the latest results for diamond growth, doping, device fabrication, theoretical modeling and device performance - Examines why diamond semiconductors could lead to superior power electronics - Discusses the main challenges to device realization and the best opportunities for the next generation of power electronics

Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 1904 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wide Energy Bandgap Electronic Devices written by Fan Ren and published by World Scientific. This book was released on 2003 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art GaN and SiC electronic devices, as well as detailed applications of these devices to power conditioning, r. f. base station infrastructure and high temperature electronics.

Download or read book Gallium Nitride And Silicon Carbide Power Devices written by B Jayant Baliga and published by World Scientific Publishing Company. This book was released on 2016-12-12 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last 30 years, significant progress has been made to improve our understanding of gallium nitride and silicon carbide device structures, resulting in experimental demonstration of their enhanced performances for power electronic systems. Gallium nitride power devices made by the growth of the material on silicon substrates have gained a lot of interest. Power device products made from these materials have become available during the last five years from many companies.This comprehensive book discusses the physics of operation and design of gallium nitride and silicon carbide power devices. It can be used as a reference by practicing engineers in the power electronics industry and as a textbook for a power device or power electronics course in universities.