Download or read book Modeling and Analysis with Induction Generators Third Edition written by M. Godoy Simões and published by CRC Press. This book was released on 2014-12-11 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its Third Edition, Alternative Energy Systems: Design and Analysis with Induction Generators has been renamed Modeling and Analysis with Induction Generators to convey the book’s primary objective—to present the fundamentals of and latest advances in the modeling and analysis of induction generators. New to the Third Edition Revised equations and mathematical modeling Addition of solved problems as well as suggested problems at the end of each chapter New modeling and simulation cases Mathematical modeling of the Magnus turbine to be used with induction generators Detailed comparison between the induction generators and their competitors Modeling and Analysis with Induction Generators, Third Edition aids in understanding the process of self-excitation, numerical analysis of stand-alone and multiple induction generators, requirements for optimized laboratory experimentation, application of modern vector control, optimization of power transference, use of doubly fed induction generators, computer-based simulations, and social and economic impacts.

Download or read book Renewable Energy Systems written by M. Godoy Simões and published by CRC Press. This book was released on 2004-05-11 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the world moves toward renewable energy sources to combat environmental and power distribution issues, there has been a resurgence of interest in induction generators, particularly in their use in wind and hydropower generation systems. Induction machines operating as generators are rugged and cost effective, and with recent advances in control and optimization, the control design aspects are now moving from the laboratory to the desks of practicing engineers. Renewable Energy Systems: Design and Analysis with Induction Generators presents the first comprehensive exposition of induction machines used for power generation. Focusing on renewable energy applications, the authors address virtually all aspects of the design, operation, and analysis of these systems, from the very basics to the latest technologies, including: New methods of characteristics testing, aimed at reduced test time, precision, and automation Reactive compensation techniques Control, including scalar control, vector control, and optimization techniques for peak power tracking control Interconnecting induction generators to the main grid Behavior in the presence of switched and controlled electronic converters Using PSPICE, MATLAB, PSIM, C, Pascal and Excel for modeling and simulation Robust, economical, and low maintenance, induction generators hold outstanding potential for helping to fulfill the world's energy needs. This book provides the background and the tools you need to begin developing power plants and become expert in the applications and deployment of induction generator systems.

Download or read book Modeling and Analysis of Doubly Fed Induction Generator Wind Energy Systems written by Lingling Fan and published by Academic Press. This book was released on 2015-04-16 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind Energy Systems: Modeling, Analysis and Control with DFIG provides key information on machine/converter modelling strategies based on space vectors, complex vector, and further frequency-domain variables. It includes applications that focus on wind energy grid integration, with analysis and control explanations with examples. For those working in the field of wind energy integration examining the potential risk of stability is key, this edition looks at how wind energy is modelled, what kind of control systems are adopted, how it interacts with the grid, as well as suitable study approaches. Not only giving principles behind the dynamics of wind energy grid integration system, but also examining different strategies for analysis, such as frequency-domain-based and state-space-based approaches. Focuses on real and reactive power control Supported by PSCAD and Matlab/Simulink examples Considers the difference in control objectives between ac drive systems and grid integration systems

Download or read book Distribution System Modeling and Analysis Third Edition written by William H. Kersting and published by CRC Press. This book was released on 2016-02-03 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to reflect the latest changes and advances in the field, Distribution System Modeling and Analysis, Third Edition again illustrates methods that will ensure the most accurate possible results in computational modeling for electric power distribution systems. With the same simplified approach of previous editions, this book clearly explains the principles and mathematics behind system models, also discussing the "smart grid" concept and its special benefits. However, this volume adds a crucial element not found in previous editions. The first two books developed models for all components but focused less on how to actually implement those models on a computer for planning and for real-time analysis. This book includes numerous models of components and several practical examples, to demonstrate how engineers can apply and customize computer programs to help them plan and operate systems. It also covers approximation methods to help users interpret computer program feedback, so they recognize when a result is not what it should be. Another improvement is the book’s earlier introduction (in chapter 4) of the modified ladder iterative technique. The author explains the need for this method—which is used in most distribution analysis programs—detailing how it is applied and why it is among the most powerful options. Concluding with a detailed summary of presented topics that readers have come to expect, this edition provides useful problems, references, and assignments that help users apply Mathcad® and WIndmil programs to put their new learning into practice. An invaluable tool for engineering students and professionals worldwide, this book explores cutting-edge advances in modeling, simulation, and analysis of distribution systems that can ensure the continued dispersal of safe, reliable energy. Watch William H. Kerstig talk about his book at: http://www.youtube.com/watch?v=qmlDiH1ntuE

Download or read book Doubly Fed Induction Generators written by Edgar N. Sanchez and published by CRC Press. This book was released on 2016-08-05 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doubly Fed Induction Generators: Control for Wind Energy provides a detailed source of information on the modeling and design of controllers for the doubly fed induction generator (DFIG) used in wind energy applications. Focusing on the use of nonlinear control techniques, this book: Discusses the main features and advantages of the DFIG Describes key theoretical fundamentals and the DFIG mathematical model Develops controllers using inverse optimal control, sliding modes, and neural networks Devises an improvement to add robustness in the presence of parametric variations Details the results of real-time implementations All controllers presented in the book are tested in a laboratory prototype. Comparisons between the controllers are made by analyzing statistical measures applied to the control objectives.

Download or read book Alternative Energy Systems written by M. Godoy Simões and published by CRC Press. This book was released on 2007-12-10 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: New perspectives on using induction generators in alternative energy technologies Durable and cost-effective, induction power generators have undergone numerous improvements that make them an increasingly attractive option for renewable energy applications, particularly for wind and hydropower generation systems. From fundamental concepts to the latest technologies, Alternative Energy Systems: Design and Analysis with Induction Generators, Second Edition provides detailed and accurate coverage of all aspects related to the design, operation, and overall analysis of such systems. Placing a greater emphasis on providing clear, precise, and succinct explanations, this second edition features new, revised, and updated content as well as figures, tables, equations, and examples. Each chapter introduces a multi-step, chapter-length problem relating the material to a real application. The solution appears at the end of the chapter, along with additional practice problems and references. New Material in This Edition: Updated definitions for generated power and efficiency Technological advances, such as new applications using doubly-fed induction generators New methodologies, such as the magnetization curve representation for induction generators Additional focus on renewable energy applications such as sea, wind, and hydropower systems Totally re-written and updated chapter covering doubly-fed induction generators Alternative Energy Systems provides the tools and expertise for advanced students and professionals in electrical, mechanical, civil, and environmental engineering involved in the development of power plants. ";

Download or read book Advanced Control of Doubly Fed Induction Generator for Wind Power Systems written by Dehong Xu and published by John Wiley & Sons. This book was released on 2018-08-14 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamental concepts and advanced modelling techniques of Doubly Fed Induction Generators accompanied by analyses and simulation results Filled with illustrations, problems, models, analyses, case studies, selected simulation and experimental results, Advanced Control of Doubly Fed Induction Generator for Wind Power Systems provides the basic concepts for modelling and controlling of Doubly Fed Induction Generator (DFIG) wind power systems and their power converters. It explores both the challenges and concerns of DFIG under a non-ideal grid and introduces the control strategies and effective operations performance options of DFIG under a non-ideal grid. Other topics of this book include thermal analysis of DFIG wind power converters under grid faults; implications of the DFIG test bench; advanced control of DFIG under harmonic distorted grid voltage, including multiple-loop and resonant control; modeling of DFIG and GSC under unbalanced grid voltage; the LFRT of DFIG, including the recurring faults ride through of DFIG; and more. In addition, this resource: Explores the challenges and concerns of Doubly Fed Induction Generators (DFIG) under non-ideal grid Discusses basic concepts of DFIG wind power system and vector control schemes of DFIG Introduces control strategies under a non-ideal grid Includes case studies and simulation and experimental results Advanced Control of Doubly Fed Induction Generator for Wind Power Systems is an ideal book for graduate students studying renewable energy and power electronics as well as for research and development engineers working with wind power converters.

Download or read book Fuel Cells written by Bei Gou and published by CRC Press. This book was released on 2016-08-05 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advanced research results on Modeling and Control designs for Fuel Cells and their hybrid energy systems. Filled with simulation examples and test results, it provides detailed discussions on Fuel Cell Modeling, Analysis, and Nonlinear control. Beginning with an introduction to Fuel Cells and Fuel Cell Power Systems, as well as the fundamentals of Fuel Cell Systems and their components, it then presents the Linear and Nonlinear modeling of Fuel Cell Dynamics. Typical approaches of Linear and Nonlinear Modeling and Control Design methods for Fuel Cells are also discussed. The authors explore the Simulink implementation of Fuel Cells, including the modeling of PEM Fuel Cells and Control Designs. They cover the applications of Fuel cells in vehicles, utility power systems, and stand-alone systems, which integrate Fuel Cells, Wind Power, and Solar Power. Mathematical preliminaries on Linear and Nonlinear Control are provided in an appendix.

Download or read book Advanced DC DC Converters Second Edition written by Fang Lin Luo and published by CRC Press. This book was released on 2016-12-08 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: DC/DC conversion techniques have undergone rapid development in recent decades. With the pioneering work of authors Fang Lin Luo and Hong Ye, DC/DC converters have now been sorted into their six generations, and by a rough count, over 800 different topologies currently exist, with more being developed each year. Advanced DC/DC Converters, Second Edition offers a concise, practical presentation of DC/DC converters, summarizes the spectrum of conversion technologies, and presents new ideas and more than 200 new topologies. Beginning with background material on DC/DC conversion, the book later discusses both voltage lift and super-lift converters. It then proceeds through each generation, including the groundbreaking sixth generation—converters developed by the authors that can be cascaded for high voltage transfer gain. This new edition updates every chapter and offers three new chapters. The introduction of the super-lift technique is an outstanding achievement in DC/DC conversion technology, and the ultra-lift technique and hybrid split-capacitor/inductor applied in Super-Lift Luo-Converters are introduced in Chapters 7 and 8. In Chapter 9, the authors have theoretically defined a new concept, Energy Factor (EF), researched the relations between EF and the mathematical modelling for power DC/DC converters, and demonstrated the modeling method for two converters. More than 320 figures, 60 tables, and 500 formulae allow the reader to more easily grasp the overall structure of advanced DC/DC converters, provide fast access to precise data, and help them to quickly determine the values of their own circuit components.

Download or read book Electricity and Electronics for Renewable Energy Technology written by Ahmad Hemami and published by CRC Press. This book was released on 2017-09-29 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electricity and Electronics for Renewable Energy Technology: An Introduction provides a foundational understanding of electricity and the methods and devices specific to electricity from renewable sources. The book begins with a brief explanation of the necessary mathematics and then: Addresses the basics of electricity and relationships, motors and generators, transformers, and networks and distribution Tackles the key concepts associated with electronics, diodes and transistors, switching devices, and power converters Covers digital electronics from number systems and logic circuits to encoders and decoders Explores advanced subjects such as reactive power and the operation of a transistor A lab manual and PowerPoint presentation are available with qualifying course adoption. Featuring extensive review questions and practice problems at the end of each chapter, Electricity and Electronics for Renewable Energy Technology: An Introduction instills an essential knowledge of electricity and electronics required for work with renewable energy.

Download or read book Modeling Power Electronics and Interfacing Energy Conversion Systems written by M. Godoy Simoes and published by John Wiley & Sons. This book was released on 2016-10-24 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the application of mathematical and engineering tools for modeling, simulation and control oriented for energy systems, power electronics and renewable energy This book builds on the background knowledge of electrical circuits, control of dc/dc converters and inverters, energy conversion and power electronics. The book shows readers how to apply computational methods for multi-domain simulation of energy systems and power electronics engineering problems. Each chapter has a brief introduction on the theoretical background, a description of the problems to be solved, and objectives to be achieved. Block diagrams, electrical circuits, mathematical analysis or computer code are covered. Each chapter concludes with discussions on what should be learned, suggestions for further studies and even some experimental work. Discusses the mathematical formulation of system equations for energy systems and power electronics aiming state-space and circuit oriented simulations Studies the interactions between MATLAB and Simulink models and functions with real-world implementation using microprocessors and microcontrollers Presents numerical integration techniques, transfer-function modeling, harmonic analysis and power quality performance assessment Examines existing software such as, MATLAB/Simulink, Power Systems Toolbox and PSIM to simulate power electronic circuits including the use of renewable energy sources such as wind and solar sources The simulation files are available for readers who register with the Google Group: power-electronics-interfacing-energy-conversion-systems@googlegroups.com. After your registration you will receive information in how to access the simulation files, the Google Group can also be used to communicate with other registered readers of this book.

Download or read book Doubly Fed Induction Generators written by Edgar N. Sanchez and published by CRC Press. This book was released on 2016-08-05 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doubly Fed Induction Generators: Control for Wind Energy provides a detailed source of information on the modeling and design of controllers for the doubly fed induction generator (DFIG) used in wind energy applications. Focusing on the use of nonlinear control techniques, this book: Discusses the main features and advantages of the DFIG Describes key theoretical fundamentals and the DFIG mathematical model Develops controllers using inverse optimal control, sliding modes, and neural networks Devises an improvement to add robustness in the presence of parametric variations Details the results of real-time implementations All controllers presented in the book are tested in a laboratory prototype. Comparisons between the controllers are made by analyzing statistical measures applied to the control objectives.

Download or read book Induction Machines Handbook written by Ion Boldea and published by CRC Press. This book was released on 2020-05-19 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Induction Machines Handbook: Transients, Control Principles, Design and Testing presents a practical up-to-date treatment of intricate issues with induction machines (IM) required for design and testing in both rather constant- and variable-speed (with power electronics) drives. It contains ready-to-use industrial design and testing knowledge, with numerous case studies to facilitate a thorough assimilation of new knowledge. Individual Chapters 1 through 14 discuss in detail the following: Three- and multiphase IM transients Single-phase source IM transients Super-high-frequency models and behavior of IM Motor specifications and design principles IM design below 100 kW and constant V1 and f1 IM design above 100 kW and constant V1 and f1 IM design principles for variable speed Optimization design Single-phase IM design Three-phase IM generators Single-phase IM generators Linear induction motors Testing of three-phase IMs Single-phase IM testing Fully revised and amply updated to add the new knowledge of the last decade, this third edition includes special sections on Multiphase IM models for transients Doubly fed IMs models for transients Cage-rotor synchronized reluctance motors Cage-rotor PM synchronous motor Transient operation of self-excited induction generator Brushless doubly fed induction motor/generators Doubly fed induction generators with D.C. output Linear induction motor control with end effect Recent trends in IM testing with power electronics Cage-PM rotor line-start IM testing Linear induction motor (LIM) testing This up-to-date book discusses in detail the transients, control principles, and design and testing of various IMs for line-start and variable-speed applications in various topologies, with numerous case studies. It will be of direct assistance to academia and industry in conceiving, designing, fabricating, and testing IMs (for the future) of various industries, from home appliances, through robotics, e-transport, and renewable energy conversion.

Download or read book Model Predictive Control for Doubly Fed Induction Generators and Three Phase Power Converters written by Alfeu Sguarezi and published by Elsevier. This book was released on 2022-01-06 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control for Doubly-Fed Induction Generators and Three-Phase Power Converters describes the application of model predictive control techniques with modulator and finite control sets to squirrel cage induction motor and in doubly-fed induction generators using field orientation control techniques as both current control and direct power control. Sections discuss induction machines, their key modulation techniques, introduce the utility of model predictive control, review core concepts of vector control, direct torque control, and direct power control alongside novel approaches of MPC. Mathematical modeling of cited systems, MPC theory, their applications, MPC design and simulation in MATLAB are also considered in-depth. The work concludes by addressing implementation considerations, including generator operation under voltage sags or distorted voltage and inverters connected to the grid operating under distorted voltage. Experimental results are presented in full. Adopts model predictive control design for optimized induction machines geared for complex grid dynamics Demonstrates how to simulate model predictive control using MATLAB and Simulink Presents information about hardware implementation to obtain experimental results Covers generator operation under voltage sags or distorted voltage

Download or read book Induction Machines Handbook written by Ion Boldea and published by CRC Press. This book was released on 2020-05-26 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Induction Machines Handbook: Steady State Modeling and Performance offers a thorough treatment of steady-state induction machines (IM), the most used electric motor (generator) in rather constant or variable speed drives, forever lower energy consumption and higher productivity in basically all industries, from home appliances, through robotics to e-transport and wind energy conversion. Chapter 1 offers a detailed introduction from fundamental principles to topological classifications and most important applications and power ranges from tens of W to tens of MW. Then individual Chapters 2 and 4 deal in detail with specific issues, such as Magnetic, electric, and insulation materials Electric windings and their mmf Magnetization curve and inductance Leakage inductances and resistances Steady-state equivalent circuit and performance Starting and speed control methods Skin and on-load saturation effects Field harmonics, parasitic torques, radial forces, noise Losses Thermal modeling Single-phase induction machine basics Single-phase induction motors: steady-state modeling and performance Fully revised and updated to reflect the last decade’s progress in the field, this third edition adds new sections, such as Multiphase and multilayer tooth-wound coil windings The brushless doubly fed induction machine (BDFIM) Equivalent circuits for BDFIM Control principles for doubly fed IM Magnetic saturation effects on current and torque versus slip curves Rotor leakage reactance saturation Closed-slot IM saturation The origin of electromagnetic vibration by practical experience PM-assisted split-phase cage-rotor IM’s steady state The promise of renewable (hydro and wind) energy via cage-rotor and doubly fed variable speed generators e-transport propulsion and i-home appliances makes this third edition a state-of-the-art tool, conceived with numerous case studies and timely for both academia and industry.

Download or read book Modeling and Control of Modern Electrical Energy Systems written by Masoud Karimi-Ghartemani and published by John Wiley & Sons. This book was released on 2022-08-04 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Control of Modern Electrical Energy Systems A step-by-step approach to the modeling, analysis, and control of modern electronically controlled energy systems In Modeling and Control of Modern Electrical Energy Systems, distinguished researcher Dr. Masoud Karimi-Ghartemani delivers a comprehensive discussion of distributed and renewable energy resource integration from a control system perspective. The book explores various practical aspects of these systems, including the power extraction control of renewable resources and size selection of short-term storage components. The interactions of distributed energy resources (DERs) with the rest of the electric power system are presented, as is a discussion of the ability of the DER to ride through grid voltage faults and frequency swings. Readers will also discover how to derive mathematical models of different types of energy systems and build simulation models for those systems. Modeling and Control of Electrical Energy Systems provides end-of chapter examples and problems, as well as: A thorough introduction to power electronic conversion, including power electronics and standard power electronic converters An in-depth treatment of feedback control systems, including frequency-domain (transfer function) approaches and time-domain (state space) approaches Comprehensive discussions of direct current DERs and single-phase alternating current DERs Fulsome explorations of three-phase distributed energy resources Perfect for researchers, practitioners, and professors with an interest in electronically interfaced modern energy systems, Modeling and Control of Modern Electrical Energy Systems will also earn a place in the libraries of senior undergraduate and graduate students of electrical engineering.

Download or read book Power System Stability and Control Third Edition written by Leonard L. Grigsby and published by CRC Press. This book was released on 2012-04-25 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from worldwide leaders in the field, Power System Stability and Control, Third Edition (part of the five-volume set, The Electric Power Engineering Handbook) updates coverage of recent developments and rapid technological growth in essential aspects of power systems. Edited by L.L. Grigsby, a respected and accomplished authority in power engineering, and section editors Miroslav Begovic, Prabha Kundur, and Bruce Wollenberg, this reference presents substantially new and revised content. Topics covered include: Power System Protection Power System Dynamics and Stability Power System Operation and Control This book provides a simplified overview of advances in international standards, practices, and technologies, such as small signal stability and power system oscillations, power system stability controls, and dynamic modeling of power systems. This resource will help readers achieve safe, economical, high-quality power delivery in a dynamic and demanding environment. With five new and 10 fully revised chapters, the book supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. New Chapters Cover: Systems Aspects of Large Blackouts Wide-Area Monitoring and Situational Awareness Assessment of Power System Stability and Dynamic Security Performance Wind Power Integration in Power Systems FACTS Devices A volume in the Electric Power Engineering Handbook, Third Edition. Other volumes in the set: K12642 Electric Power Generation, Transmission, and Distribution, Third Edition (ISBN: 9781439856284) K12648 Power Systems, Third Edition (ISBN: 9781439856338) K12650 Electric Power Substations Engineering, Third Edition (9781439856383) K12643 Electric Power Transformer Engineering, Third Edition (9781439856291)