Download or read book Modeling and Analysis of Chemiluminescence Sensing for Syngas Methane and Jet A Combustion written by Venkata Narasimham Nori and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Flame chemiluminescence has received increasing attention for its potential sensor and diagnostic applications in combustors. A number of studies have used flame chemiluminescence to monitor flame status, and combustor performance. While most of these studies have been empirical in nature, chemiluminescence modeling has the potential to provide a better understanding of the chemiluminescence processes and their dependence on various combustion operating conditions. The primary objective of this research was to identify and validate the important chemiluminescence reaction mechanisms for OH*, CH* and CO2*. To this end, measurements were performed at various operating conditions, primarily in laminar, premixed flames, fueled with methane, syngas (H2/CO) and Jet-A. The results are compared to 1-d laminar flame simulations employing the chemiluminescence mechanisms. The secondary objective was to use the experiments and validated chemiluminescence reaction mechanisms to evaluate the usefulness of flame chemiluminescence as a combustion diagnostic, particularly for heat release rate and equivalence ratio.
Download or read book Industrial Combustion Testing written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2010-07-29 with total page 777 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until now, anyone conducting industrial combustion tests had to either rely on old methods, go scurrying through the literature to find proven applicable methodologies, or hire top-shelf consultants such as those that work for cutting-edge companies like John Zink. Manufacturers can no longer take industrial combustion for granted. Air and noise po
Download or read book Chemiluminescence based Multivariate Sensing of Local Equivalence Ratios in Premixed Atmospheric Methane air Flames written by and published by . This book was released on 2011 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemiluminescence emissions from OH*, CH*, C2, and CO2 formed within the reaction zone of premixed flames depend upon the fuel-air equivalence ratio in the burning mixture. In the present paper, a new partial least square regression (PLS-R) based multivariate sensing methodology is investigated and compared with an OH*/CH* intensity ratio-based calibration model for sensing equivalence ratio in atmospheric methane-air premixed flames. Five replications of spectral data at nine different equivalence ratios ranging from 0.73 to 1.48 were used in the calibration of both models. During model development, the PLS-R model was initially validated with the calibration data set using the leave-one-out cross validation technique. Since the PLS-R model used the entire raw spectral intensities, it did not need the nonlinear background subtraction of CO2 emission that is required for typical OH*/CH* intensity ratio calibrations. An unbiased spectral data set (not used in the PLS-R model development), for 28 different equivalence ratio conditions ranging from 0.71 to 1.67, was used to predict equivalence ratios using the PLS-R and the intensity ratio calibration models. It was found that the equivalence ratios predicted with the PLS-R based multivariate calibration model matched the experimentally measured equivalence ratios within 7%; whereas, the OH*/CH* intensity ratio calibration grossly underpredicted equivalence ratios in comparison to measured equivalence ratios, especially under rich conditions (> 1.2). The practical implications of the chemiluminescence-based multivariate equivalence ratio sensing methodology are also discussed.
Download or read book Gas Turbine Combustion written by Arthur H. Lefebvre and published by CRC Press. This book was released on 2010-04-26 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the developments in gas turbine combustion technology that have occurred in the last decade, Gas Turbine Combustion: Alternative Fuels and Emissions, Third Edition provides an up-to-date design manual and research reference on the design, manufacture, and operation of gas turbine combustors in applications ranging from aeronautical to po
Download or read book MILD Combustion Modelling Challenges Experimental Configurations and Diagnostic Tools written by Alessandro Parente and published by Frontiers Media SA. This book was released on 2021-11-26 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Propagation and Extinction Studies of Laminar Lean Premixed Syngas Air Flames written by Yang Zhang and published by Springer. This book was released on 2017-07-27 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents pioneering experimental and numerical studies on three aspects of the combustion characteristics of lean premixed syngas/air flames, namely the laminar flame speed, extinction limit and flammability limit. It illustrates a new extinction exponent concept, which enriches the combustion theory. Above all, the book provides the following: a) a series of carefully measured data and theoretical analyses to reveal the intrinsic mechanisms of the fuel composition effect on the propagation and extinction of lean syngas/air flames; b) a mixing model and correlation to predict the laminar flame speed of multi-component syngas fuels, intended for engineering computations; c) a new “extinction exponent” concept to describe the critical effects of chemical kinetics on the extinction of lean premixed syngas/air flames; and d) the effects and mechanism of the dilution of incombustible components on lean premixed syngas/air flames and the preferential importance among the thermal, chemical and diffusion effects.
Download or read book Experimental and Computational Study of Catalytic Combustion of Methane air and Syngas air Mixtures written by Saurav Pathak and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic combustion of syngas would meet exactly these goals. Hence the study of a low energy reaction pathway of combustion of syngas on the surface of any catalyst in general has now become an important area of research. Catalytic reactor has been constructed to provide experimental data for comparison with model. Experimentally the ignition process is monitored by thermocouples and mass spectroscopy. Parameters such as equivalence ratio, temperature and the surface site density of the catalyst surface were varied in the computational works to bring out their influence on the kinetics of combustion.
Download or read book Applied Combustion Diagnostics written by Katharina Kohse-Hoinghaus and published by CRC Press. This book was released on 2002-04-26 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: The editors have assembled a world-class group of contributors who address the questions the combustion diagnostic community faces. They are chemists who identify the species to be measured and the interfering substances that may be present; physicists, who push the limits of laser spectroscopy and laser devices and who conceive suitable measuremen
Download or read book Combustion written by J. Warnatz and published by Springer Science & Business Media. This book was released on 2006-09-23 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous treatment of the coupling of chemical reactions and fluid flow. Combustion-specific topics of chemistry and fluid mechanics are considered and tools described for the simulation of combustion processes. This edition is completely restructured. Mathematical Formulae and derivations as well as the space-consuming reaction mechanisms have been replaced from the text to appendix. A new chapter discusses the impact of combustion processes on the atmosphere, the chapter on auto-ignition is extended to combustion in Otto- and Diesel-engines, and the chapters on heterogeneous combustion and on soot formation are heavily revised.
Download or read book Flames Their Structure Radiation and Temperature written by Alfred Gordon Gaydon and published by . This book was released on 1979 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Controlling Nitrogen Oxides written by Alice Hastings and published by . This book was released on 1980 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion Instabilities in Gas Turbine Engines written by Timothy C. Lieuwen and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2005 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers gas turbine users and manufacturers a valuable resource to help them sort through issues associated with combustion instabilities. In the last ten years, substantial efforts have been made in the industrial, governmental, and academic communities to understand the unique issues associated with combustion instabilities in low-emission gas turbines. The objective of this book is to compile these results into a series of chapters that address the various facets of the problem. The Case Studies section speaks to specific manufacturer and user experiences with combustion instabilities in the development stage and in fielded turbine engines. The book then goes on to examine The Fundamental Mechanisms, The Combustor Modeling, and Control Approaches.
Download or read book Synthesis Gas Combustion written by Tim Lieuwen and published by CRC Press. This book was released on 2009-09-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal, still used to generate more than half of the electric power in the U.S., will likely be part of any future global energy plan. But this finite resource is also responsible for 80 percent of the CO2 emissions from power production, and its continued use will require improved processing techniques that are less damaging to the environment and l
Download or read book Integrated Gasification Combined Cycle IGCC Technologies written by Ting Wang and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants. Provides an in-depth, multi-contributor overview of integrated gasification combined cycle technologies Reviews the current status and future developments of key technologies involved in IGCC plants Provides several case studies of existing IGCC plants around the world
Download or read book Mathematical Modelling of Gas Phase Complex Reaction Systems Pyrolysis and Combustion written by and published by Elsevier. This book was released on 2019-06-21 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling of Gas-Phase Complex Reaction Systems: Pyrolysis and Combustion, Volume 45, gives an overview of the different steps involved in the development and application of detailed kinetic mechanisms, mainly relating to pyrolysis and combustion processes. The book is divided into two parts that cover the chemistry and kinetic models and then the numerical and statistical methods. It offers a comprehensive coverage of the theory and tools needed, along with the steps necessary for practical and industrial applications. Details thermochemical properties and "ab initio" calculations of elementary reaction rates Details kinetic mechanisms of pyrolysis and combustion processes Explains experimental data for improving reaction models and for kinetic mechanisms assessment Describes surrogate fuels and molecular reconstruction of hydrocarbon liquid mixtures Describes pollutant formation in combustion systems Solves and validates the kinetic mechanisms using numerical and statistical methods Outlines optimal design of industrial burners and optimization and dynamic control of pyrolysis furnaces Outlines large eddy simulation of turbulent reacting flows
Download or read book Cleaner Combustion written by Frédérique Battin-Leclerc and published by Springer Science & Business Media. This book was released on 2013-09-06 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This overview compiles the on-going research in Europe to enlarge and deepen the understanding of the reaction mechanisms and pathways associated with the combustion of an increased range of fuels. Focus is given to the formation of a large number of hazardous minor pollutants and the inability of current combustion models to predict the formation of minor products such as alkenes, dienes, aromatics, aldehydes and soot nano-particles which have a deleterious impact on both the environment and on human health. Cleaner Combustion describes, at a fundamental level, the reactive chemistry of minor pollutants within extensively validated detailed mechanisms for traditional fuels, but also innovative surrogates, describing the complex chemistry of new environmentally important bio-fuels. Divided into five sections, a broad yet detailed coverage of related research is provided. Beginning with the development of detailed kinetic mechanisms, chapters go on to explore techniques to obtain reliable experimental data, soot and polycyclic aromatic hydrocarbons, mechanism reduction and uncertainty analysis, and elementary reactions. This comprehensive coverage of current research provides a solid foundation for researchers, managers, policy makers and industry operators working in or developing this innovative and globally relevant field.
Download or read book Chemically Reacting Flow written by Robert J. Kee and published by John Wiley & Sons. This book was released on 2005-02-18 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex chemically reacting flow simulations are commonly employed to develop quantitative understanding and to optimize reaction conditions in systems such as combustion, catalysis, chemical vapor deposition, and other chemical processes. Although reaction conditions, geometries, and fluid flow can vary widely among the applications of chemically reacting flows, all applications share a need for accurate, detailed descriptions of the chemical kinetics occurring in the gas-phase or on reactive surfaces. Chemically Reacting Flow: Theory and Practice combines fundamental concepts in fluid mechanics and physical chemistry, assisting the student and practicing researcher in developing analytical and simulation skills that are useful and extendable for solving real-world engineering problems. The first several chapters introduce transport processes, primarily from a fluid-mechanics point of view, incorporating computational simulation from the outset. The middle section targets physical chemistry topics that are required to develop chemically reacting flow simulations, such as chemical thermodynamics, molecular transport, chemical rate theories, and reaction mechanisms. The final chapters deal with complex chemically reacting flow simulations, emphasizing combustion and materials processing. Among other features, Chemically Reacting Flow: Theory and Practice: -Advances a comprehensive approach to interweaving the fundamentals of chemical kinetics and fluid mechanics -Embraces computational simulation, equipping the reader with effective, practical tools for solving real-world problems -Emphasizes physical fundamentals, enabling the analyst to understand how reacting flow simulations achieve their results -Provides a valuable resource for scientists and engineers who use Chemkin or similar software Computer simulation of reactive systems is highly effective in the development, enhancement, and optimization of chemical processes. Chemically Reacting Flow helps prepare both students and professionals to take practical advantage of this powerful capability.
