EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Model Validation and Uncertainty Quantification  Volume 3

Download or read book Model Validation and Uncertainty Quantification Volume 3 written by Roland Platz and published by Springer Nature. This book was released on 2023-10-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Validation and Uncertainty Quantification, Volume 3: Proceedings of the 41st IMAC, A Conference and Exposition on Structural Dynamics, 2023, the third volume of ten from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Model Validation and Uncertainty Quantification, including papers on: Introduction of Uncertainty Quantification Uncertainty Quantification in Dynamics Model Form Uncertainty and Selection incl. Round Robin Challenge Sensor and Information Fusion Virtual Sensing, Certification, and Real-Time Monitoring Surrogate Modeling

Book Modeling for Decision Support in Network Based Services

Download or read book Modeling for Decision Support in Network Based Services written by Daniel Dolk and published by Springer. This book was released on 2012-01-11 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book originated from several recent workshops and related activities conducted by the IFIP Working Group 7.6 on "Optimization-Based Computer Aided Modeling and Design." This group has been active for 20 years with the stated objective of developing ”high-performance computer-aided systems to support modeling, decision analysis, optimization and multi-criteria decision making.” Recently, the group has turned its attention to the application of modeling and optimization to service science, management and engineering (SSME). SSME is still a young research field searching for its theoretical underpinnings, and one which offers many opportunities for analytical modeling to not only advance the understanding, but also to help form the foundation of a new discipline. This book is the result of the group's introductory foray into the application of quantitative modeling to the nascent field of service science with special emphasis on the network aspects of services. The 11 papers presented are grouped into sections on Network Science, Comptational and Analytical Modeling, and Knowledge Science. They showcase the value of modeling in a new and timely context and provide many seeds for further exciting research.

Book Proceedings of the Fifteenth International Conference on Management Science and Engineering Management

Download or read book Proceedings of the Fifteenth International Conference on Management Science and Engineering Management written by Jiuping Xu and published by Springer Nature. This book was released on 2021-07-15 with total page 869 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the fifteenth International Conference on Management Science and Engineering Management (ICMSEM 2021) held on August 1-4, 2021, at the University of Castilla-La Mancha (UCLM), Toledo, Spain. The proceedings contains theoretical and practical research of decision support systems, complex systems, empirical studies, sustainable development, project management, and operation optimization, showing advanced management concepts and demonstrates substantial interdisciplinary developments in MSEM methods and practical applications. It allows researchers and practitioners in management science and engineering management (MSEM) to share their latest insights and contribution. Meanwhile, it appeals to readers interested in these areas, especially those looking for new ideas and research directions.

Book Handbook of Dynamic Data Driven Applications Systems

Download or read book Handbook of Dynamic Data Driven Applications Systems written by Frederica Darema and published by Springer Nature. This book was released on 2023-10-16 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Second Volume in the series Handbook of Dynamic Data Driven Applications Systems (DDDAS) expands the scope of the methods and the application areas presented in the first Volume and aims to provide additional and extended content of the increasing set of science and engineering advances for new capabilities enabled through DDDAS. The methods and examples of breakthroughs presented in the book series capture the DDDAS paradigm and its scientific and technological impact and benefits. The DDDAS paradigm and the ensuing DDDAS-based frameworks for systems’ analysis and design have been shown to engender new and advanced capabilities for understanding, analysis, and management of engineered, natural, and societal systems (“applications systems”), and for the commensurate wide set of scientific and engineering fields and applications, as well as foundational areas. The DDDAS book series aims to be a reference source of many of the important research and development efforts conducted under the rubric of DDDAS, and to also inspire the broader communities of researchers and developers about the potential in their respective areas of interest, of the application and the exploitation of the DDDAS paradigm and the ensuing frameworks, through the examples and case studies presented, either within their own field or other fields of study. As in the first volume, the chapters in this book reflect research work conducted over the years starting in the 1990’s to the present. Here, the theory and application content are considered for: Foundational Methods Materials Systems Structural Systems Energy Systems Environmental Systems: Domain Assessment & Adverse Conditions/Wildfires Surveillance Systems Space Awareness Systems Healthcare Systems Decision Support Systems Cyber Security Systems Design of Computer Systems The readers of this book series will benefit from DDDAS theory advances such as object estimation, information fusion, and sensor management. The increased interest in Artificial Intelligence (AI), Machine Learning and Neural Networks (NN) provides opportunities for DDDAS-based methods to show the key role DDDAS plays in enabling AI capabilities; address challenges that ML-alone does not, and also show how ML in combination with DDDAS-based methods can deliver the advanced capabilities sought; likewise, infusion of DDDAS-like approaches in NN-methods strengthens such methods. Moreover, the “DDDAS-based Digital Twin” or “Dynamic Digital Twin”, goes beyond the traditional DT notion where the model and the physical system are viewed side-by-side in a static way, to a paradigm where the model dynamically interacts with the physical system through its instrumentation, (per the DDDAS feed-back control loop between model and instrumentation).

Book Structural Health Monitoring Based on Data Science Techniques

Download or read book Structural Health Monitoring Based on Data Science Techniques written by Alexandre Cury and published by Springer Nature. This book was released on 2021-10-23 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modern structural health monitoring (SHM) paradigm of transforming in situ, real-time data acquisition into actionable decisions regarding structural performance, health state, maintenance, or life cycle assessment has been accelerated by the rapid growth of “big data” availability and advanced data science. Such data availability coupled with a wide variety of machine learning and data analytics techniques have led to rapid advancement of how SHM is executed, enabling increased transformation from research to practice. This book intends to present a representative collection of such data science advancements used for SHM applications, providing an important contribution for civil engineers, researchers, and practitioners around the world.

Book Geospatial Analytics for Environmental Pollution Modeling

Download or read book Geospatial Analytics for Environmental Pollution Modeling written by Fayma Mushtaq and published by Springer Nature. This book was released on 2023-12-01 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide a comprehensive study on various aspects of environmental pollution dynamics using geospatial technology and modeling techniques. The utility of geospatial technology will be demonstrated for the effective study of environmental pollution, as space and location are very important for effective environmental health surveillance. The timeliness of the work is due to the increasing relevance of geospatial technology applications in environmental health investigations. Moreover, different types of pollution are covered in detail, including air and soil, all of which are analyzed using latest Remote Sensing and GIS technology. The basics of environmental pollution and its impacts are covered in the book's first part, while the second part focuses on the use of geospatial technology in investigating and modeling various instances of environmental pollution. The third part discusses policy measures for mitigating environmental pollution hazards, using geospatial analyses and data to craft informed policy decisions. The primary audience for the book is researchers working in the field of environmental pollution with incorporation of geospatial technology, including upper-level undergraduate and graduate students taking courses in remote sensing and its environmental applications. The secondary audience is academicians, planners, environmentalists and policymakers working in the field of environment protection and management.

Book Encyclopedia of Organizational Knowledge  Administration  and Technology

Download or read book Encyclopedia of Organizational Knowledge Administration and Technology written by Khosrow-Pour D.B.A., Mehdi and published by IGI Global. This book was released on 2020-09-29 with total page 2734 pages. Available in PDF, EPUB and Kindle. Book excerpt: For any organization to be successful, it must operate in such a manner that knowledge and information, human resources, and technology are continually taken into consideration and managed effectively. Business concepts are always present regardless of the field or industry – in education, government, healthcare, not-for-profit, engineering, hospitality/tourism, among others. Maintaining organizational awareness and a strategic frame of mind is critical to meeting goals, gaining competitive advantage, and ultimately ensuring sustainability. The Encyclopedia of Organizational Knowledge, Administration, and Technology is an inaugural five-volume publication that offers 193 completely new and previously unpublished articles authored by leading experts on the latest concepts, issues, challenges, innovations, and opportunities covering all aspects of modern organizations. Moreover, it is comprised of content that highlights major breakthroughs, discoveries, and authoritative research results as they pertain to all aspects of organizational growth and development including methodologies that can help companies thrive and analytical tools that assess an organization’s internal health and performance. Insights are offered in key topics such as organizational structure, strategic leadership, information technology management, and business analytics, among others. The knowledge compiled in this publication is designed for entrepreneurs, managers, executives, investors, economic analysts, computer engineers, software programmers, human resource departments, and other industry professionals seeking to understand the latest tools to emerge from this field and who are looking to incorporate them in their practice. Additionally, academicians, researchers, and students in fields that include but are not limited to business, management science, organizational development, entrepreneurship, sociology, corporate psychology, computer science, and information technology will benefit from the research compiled within this publication.

Book Advanced Mapping of Environmental Data

Download or read book Advanced Mapping of Environmental Data written by Mikhail Kanevski and published by John Wiley & Sons. This book was released on 2013-05-10 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines geostatistics and global mapping systems to present an up-to-the-minute study of environmental data. Featuring numerous case studies, the reference covers model dependent (geostatistics) and data driven (machine learning algorithms) analysis techniques such as risk mapping, conditional stochastic simulations, descriptions of spatial uncertainty and variability, artificial neural networks (ANN) for spatial data, Bayesian maximum entropy (BME), and more.

Book Network Meta Analysis for Decision Making

Download or read book Network Meta Analysis for Decision Making written by Sofia Dias and published by John Wiley & Sons. This book was released on 2018-03-19 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to network meta-analysis with examples and code In the evaluation of healthcare, rigorous methods of quantitative assessment are necessary to establish which interventions are effective and cost-effective. Often a single study will not provide the answers and it is desirable to synthesise evidence from multiple sources, usually randomised controlled trials. This book takes an approach to evidence synthesis that is specifically intended for decision making when there are two or more treatment alternatives being evaluated, and assumes that the purpose of every synthesis is to answer the question "for this pre-identified population of patients, which treatment is 'best'?" A comprehensive, coherent framework for network meta-analysis (mixed treatment comparisons) is adopted and estimated using Bayesian Markov Chain Monte Carlo methods implemented in the freely available software WinBUGS. Each chapter contains worked examples, exercises, solutions and code that may be adapted by readers to apply to their own analyses. This book can be used as an introduction to evidence synthesis and network meta-analysis, its key properties and policy implications. Examples and advanced methods are also presented for the more experienced reader. Methods used throughout this book can be applied consistently: model critique and checking for evidence consistency are emphasised. Methods are based on technical support documents produced for NICE Decision Support Unit, which support the NICE Methods of Technology Appraisal. Code presented is also the basis for the code used by the ISPOR Task Force on Indirect Comparisons. Includes extensive carefully worked examples, with thorough explanations of how to set out data for use in WinBUGS and how to interpret the output. Network Meta-Analysis for Decision Making will be of interest to decision makers, medical statisticians, health economists, and anyone involved in Health Technology Assessment including the pharmaceutical industry.

Book Mechatronic Systems and Process Automation

Download or read book Mechatronic Systems and Process Automation written by Patrick O.J. Kaltjob and published by CRC Press. This book was released on 2018-03-09 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the concept of process automation and mechatronic system design, while offering a unified approach and methodology for the modeling, analysis, automation and control, networking, monitoring, and sensing of various machines and processes from single electrical-driven machines to large-scale industrial process operations. This step-by-step guide covers design applications from various engineering disciplines (mechanical, chemical, electrical, computer, biomedical) through real-life mechatronics problems and industrial automation case studies with topics such as manufacturing, power grid, cement production, wind generator, oil refining, incubator, etc. Provides step-by-step procedures for the modeling, analysis, control and automation, networking, monitoring, and sensing of single electrical-driven machines to large-scale industrial process operations. Presents model-based theory and practice guidelines for mechatronics system and process automation design. Includes worked examples in every chapter and numerous end-of-chapter real-life exercises, problems, and case studies.

Book Decision Support Systems

Download or read book Decision Support Systems written by Daniel Power and published by iUniverse. This book was released on 2004-12-21 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decision Support Systems: Frequently Asked Questions is the authoritative reference guide to computerized Decision Support Systems. Author Dan Power has spent almost 30 years building, studying and teaching others about computerized Decision Support Systems. Dr. Power is first and foremost a Decision Support evangelist and generalist. From his vantage point as editor of DSSResources.COM, he tracks a broad range of contemporary DSS topics. In this DSS FAQ, Dr. Power answers 83 frequently asked questions about computerized decision support systems. The FAQ covers a broad range of contemporary topics and the questions are organized into 8 chapters. DSS FAQ helps readers understand questions like: What is a DSS? What kind of DSS does Mr. X need? Does data modeling differ for a Data-Driven DSS? Is a Data Warehouse a DSS? Is tax preparation software an example of a DSS? What do I need to know about Data Warehousing/OLAP? What is a cost estimation DSS? What is a Spreadsheet-based DSS? Decision Support Systems: Frequently Asked Questions is a useful resource for IT specialists, students, professors and managers. It organizes important Ask Dan! questions (with answers) published in DSS News from 2000 through 2004.

Book Masters Theses in the Pure and Applied Sciences

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Oata Analysis and Synthesis (CINOAS) * at Purdue. University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 33 (thesis year 1988) a total of 13,273 theses titles from 23 Canadian and 1 85 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 33 reports theses submitted in 1988, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Book GIS and Environmental Modeling

Download or read book GIS and Environmental Modeling written by Michael F. Goodchild and published by John Wiley & Sons. This book was released on 1996-09-30 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: GIS and Environmental Modeling: Progress and Research Issues Michael F. Goodchild, Louis T. Steyaert, Bradley O. Parks, Carol Johnston, David Maidment, Michael Crane, and Sandi Glendinning, Editors With growing pressure on natural resources and landscapes there is an increasing need to predict the consequences of any changes to the environment. Modelling plays an important role in this by helping our understanding of the environment and by forecasting likely impacts. In recent years moves have been made to link models to Geographical Information Systems to provide a means of analysing changes over an area as well as over time. GIS and Environmental Modeling explores the progress made to date in integrating these two software systems. Approaches to the subject are made from theoretical, technical as well as data stand points. The existing capabilities of current systems are described along with important issues of data availability, accuracy and error. Various case studies illustrate this and highlight the common concepts and issues that exist between researchers in different environmental fields. The future needs and prospects for integrating GIS and environmental models are also explored with developments in both data handling and modelling discussed. The book brings together the knowledge and experience of over 100 researchers from academic, commercial and government backgrounds who work in a wide range of disciplines. The themes followed in the text provide a fund of knowledge and guidance for those involved in environmental modelling and GIS. The book is easily accessible for readers with a basic GIS knowledge and the ideas and results of the research are clearly illustrated with both colour and black and white graphics.

Book ICPDI 2023

    Book Details:
  • Author : Md Rabiul Islam
  • Publisher : European Alliance for Innovation
  • Release : 2023-11-21
  • ISBN : 1631904264
  • Pages : 1115 pages

Download or read book ICPDI 2023 written by Md Rabiul Islam and published by European Alliance for Innovation. This book was released on 2023-11-21 with total page 1115 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2nd International Conference on Public Management, Digital Economy and Internet Technology (ICPDI 2023) was successfully held on 1-3 September 2023 in Chongqing, China. This conference aimed to bring together researchers, scholars, and practitioners from various fields to exchange ideas and discuss advancements in the areas of public management, digital economy, and internet technology. The conference featured a diverse range of research topics, including but not limited to Public Management, Digital Economy and Internet Technology. The conference fostered a rich and stimulating intellectual environment. The program included keynote speeches by renowned experts in the field, parallel sessions for paper presentations, and panel discussions addressing emerging trends and challenges. The conference proceedings showcased a wide array of research papers, providing valuable insights into the latest theoretical and practical developments in the field of public management, digital economy, and internet technology. Participants had the opportunity to engage in constructive discussions, offer feedback, and establish potential collaborations for future research endeavors. We extend our gratitude to all participants, presenters, organizers, and sponsors for their contributions in making this conference a resounding success. We look forward to the 3rd edition of this conference, where we can further explore the dynamic intersections of public management, digital economy, and internet technology.

Book Scientific and Technical Aerospace Reports

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Modelling Intelligent Multi Modal Transit Systems

Download or read book Modelling Intelligent Multi Modal Transit Systems written by Agostino Nuzzolo and published by CRC Press. This book was released on 2017-02-17 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing mobility needs of travellers have led to the development of increasingly complex and integrated multi-modal transit networks. Hence, transport agencies and transit operators are now more urgently required to assist in the challenging task of effectively and efficiently planning, managing, and governing transit networks. A pre-condition for the development of an effective intelligent multi-modal transit system is the integration of information and communication technology (ICT) tools that will support the needs of transit operators and travellers. To achieve this, reliable real-time simulation and short-term forecasting of passenger demand and service network conditions are required to provide both real-time traveller information and successfully synchronise transit service planning and operations control. Modelling Intelligent Multi-Modal Transit Systems introduces the current trends in this newly emerging area. Recent developments in information technology and telematics have enabled a large amount of data to become available, thus further attracting transport researchers to set up new models outside the context of the traditional data-driven approach. The alternative demand-supply interaction or network assignment modelling approach has improved greatly in recent years and has a crucial role to play in this new context.