EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Model Based Engineering of Collaborative Embedded Systems

Download or read book Model Based Engineering of Collaborative Embedded Systems written by Wolfgang Böhm and published by Springer Nature. This book was released on 2020-12-14 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book presents the results of the "Collaborative Embedded Systems" (CrESt) project, aimed at adapting and complementing the methodology underlying modeling techniques developed to cope with the challenges of the dynamic structures of collaborative embedded systems (CESs) based on the SPES development methodology. In order to manage the high complexity of the individual systems and the dynamically formed interaction structures at runtime, advanced and powerful development methods are required that extend the current state of the art in the development of embedded systems and cyber-physical systems. The methodological contributions of the project support the effective and efficient development of CESs in dynamic and uncertain contexts, with special emphasis on the reliability and variability of individual systems and the creation of networks of such systems at runtime. The project was funded by the German Federal Ministry of Education and Research (BMBF), and the case studies are therefore selected from areas that are highly relevant for Germany’s economy (automotive, industrial production, power generation, and robotics). It also supports the digitalization of complex and transformable industrial plants in the context of the German government's "Industry 4.0" initiative, and the project results provide a solid foundation for implementing the German government's high-tech strategy "Innovations for Germany" in the coming years.

Book Advanced Model Based Engineering of Embedded Systems

Download or read book Advanced Model Based Engineering of Embedded Systems written by Klaus Pohl and published by Springer. This book was released on 2016-11-29 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction into the SPES XT modeling framework. Moreover, it shows the applicability of the framework for the development of embedded systems in different industry domains and reports on the lessons learned. It also describes how the SPES XT modeling framework can be tailored to meet domain and project-specific needs. The book is structured into four parts: Part I “Starting Situation” discusses the status quo of the development of embedded systems with specific focus on model-based engineering and summarizes key challenges emerging from industrial practice. Part II “Modeling Theory” introduces the SPES XT modeling framework and explains the core underlying principles. Part III “Application of the SPES XT Framework” describes the application of the SPES XT modeling framework and how it addresses major industrial challenges. Part IV “Evaluation and Technology Transfer” assess the impact of the SPES XT modeling framework and includes various exemplary applications from automation, automotive, and avionics. Overall, the SPES XT modeling framework offers a seamless model-based engineering approach. It addresses core challenges faced during the engineering of embedded systems. Among others, it offers aligned and integrated techniques for the early validation of engineering artefacts (including requirements and functional and technical designs), the management of product variants and their variability, modular safety assurance and deployment of embedded software.

Book Model Based Engineering of Embedded Systems

Download or read book Model Based Engineering of Embedded Systems written by Klaus Pohl and published by Springer Science & Business Media. This book was released on 2012-11-08 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems have long become essential in application areas in which human control is impossible or infeasible. The development of modern embedded systems is becoming increasingly difficult and challenging because of their overall system complexity, their tighter and cross-functional integration, the increasing requirements concerning safety and real-time behavior, and the need to reduce development and operation costs. This book provides a comprehensive overview of the Software Platform Embedded Systems (SPES) modeling framework and demonstrates its applicability in embedded system development in various industry domains such as automation, automotive, avionics, energy, and healthcare. In SPES 2020, twenty-one partners from academia and industry have joined forces in order to develop and evaluate in different industrial domains a modeling framework that reflects the current state of the art in embedded systems engineering. The content of this book is structured in four parts. Part I “Starting Point” discusses the status quo of embedded systems development and model-based engineering, and summarizes the key requirements faced when developing embedded systems in different application domains. Part II “The SPES Modeling Framework” describes the SPES modeling framework. Part III “Application and Evaluation of the SPES Modeling Framework” reports on the validation steps taken to ensure that the framework met the requirements discussed in Part I. Finally, Part IV “Impact of the SPES Modeling Framework” summarizes the results achieved and provides an outlook on future work. The book is mainly aimed at professionals and practitioners who deal with the development of embedded systems on a daily basis. Researchers in academia and industry may use it as a compendium for the requirements and state-of-the-art solution concepts for embedded systems development.

Book Requirements Engineering  Foundation for Software Quality

Download or read book Requirements Engineering Foundation for Software Quality written by Maya Daneva and published by Springer. This book was released on 2016-03-04 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 22nd International Working Conference on Requirements Engineering – Foundation for Software Quality, REFSQ 2016, held in Gothenburg, Sweden, in March 2016. The 16 full papers and 5 short papers presented in this volume were carefully reviewed and selected from 64 submissions. The papers were organized in topical sections named: decision making in requirements engineering; open source in requirements engineering; natural language; compliance in requirements engineering; requirements engineering in the automotive domain; empirical studies in requirements engineering; requirements engineering foundations; human factors in requirements engineering; and research methodology in requirements engineering.

Book Model Based Engineering of Embedded Real Time Systems

Download or read book Model Based Engineering of Embedded Real Time Systems written by Holger Giese and published by Springer Science & Business Media. This book was released on 2010-10-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thetopicof“Model-BasedEngineeringofReal-TimeEmbeddedSystems”brings together a challenging problem domain (real-time embedded systems) and a - lution domain (model-based engineering). It is also at the forefrontof integrated software and systems engineering, as software in this problem domain is an essential tool for system implementation and integration. Today, real-time - bedded software plays a crucial role in most advanced technical systems such as airplanes, mobile phones, and cars, and has become the main driver and - cilitator for innovation. Development, evolution, veri?cation, con?guration, and maintenance of embedded and distributed software nowadays are often serious challenges as drastic increases in complexity can be observed in practice. Model-based engineering in general, and model-based software development in particular, advocates the notion of using models throughout the development and life-cycle of an engineered system. Model-based software engineering re- forces this notion by promoting models not only as the tool of abstraction, but also as the tool for veri?cation, implementation, testing, and maintenance. The application of such model-based engineering techniques to embedded real-time systems appears to be a good candidate to tackle some of the problems arising in the problem domain.

Book SysML for Systems Engineering

Download or read book SysML for Systems Engineering written by Jon Holt and published by Institution of Engineering and Technology. This book was released on 2018-11-16 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems Modelling Language (SysML) is a tailored version of the unified modelling language (UML) that meets the needs of today's systems engineering professionals and engineers. It supports the specification, analysis, design, verification and validation of a broad range of systems and systems-of-systems, including hardware, software, information, personnel, procedures, and facilities in a graphical notation.

Book Formal Aspects of Component Software

Download or read book Formal Aspects of Component Software written by José Luiz Fiadeiro and published by Springer. This book was released on 2014-06-12 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the revised selected papers of the 10th International Symposium on Formal Aspects of Component Software, FACS 2013, held in Nanchang, China, in October 2013. The 19 full papers and three invited talks presented were carefully reviewed and selected from 51 submissions. The papers are concerned with how formal methods can be used to make component-based development fit for the new architectures of today and the systems that are now pervading the socio-economic worlds.

Book Conquering Complexity

    Book Details:
  • Author : Mike Hinchey
  • Publisher : Springer Science & Business Media
  • Release : 2012-01-03
  • ISBN : 1447122968
  • Pages : 477 pages

Download or read book Conquering Complexity written by Mike Hinchey and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software has long been perceived as complex, at least within Software Engineering circles. We have been living in a recognised state of crisis since the first NATO Software Engineering conference in 1968. Time and again we have been proven unable to engineer reliable software as easily/cheaply as we imagined. Cost overruns and expensive failures are the norm. The problem is fundamentally one of complexity: software is fundamentally complex because it must be precise. Problems that appear to be specified quite easily in plain language become far more complex when written in a more formal notation, such as computer code. Comparisons with other engineering disciplines are deceptive. One cannot easily increase the factor of safety of software in the same way that one could in building a steel structure, for example. Software is typically built assuming perfection, often without adequate safety nets in case the unthinkable happens. In such circumstances it should not be surprising to find out that (seemingly) minor errors have the potential to cause entire software systems to collapse. The goal of this book is to uncover techniques that will aid in overcoming complexity and enable us to produce reliable, dependable computer systems that will operate as intended, and yet are produced on-time, in budget, and are evolvable, both over time and at run time. We hope that the contributions in this book will aid in understanding the nature of software complexity and provide guidance for the control or avoidance of complexity in the engineering of complex software systems.

Book Systems Engineering and Its Application to Industrial Product Development

Download or read book Systems Engineering and Its Application to Industrial Product Development written by Eugenio Brusa and published by Springer. This book was released on 2017-12-21 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mastering the complexity of innovative systems is a challenging aspect of design and product development. Only a systematic approach can help to embed an increasing degree of smartness in devices and machines, allowing them to adapt to variable conditions or harsh environments. At the same time, customer needs have to be identified before they can be translated into consistent technical requirements. The field of Systems Engineering provides a method, a process, suitable tools and languages to cope with the complexity of various systems such as motor vehicles, robots, railways systems, aircraft and spacecraft, smart manufacturing systems, microsystems, and bio-inspired devices. It makes it possible to trace the entire product lifecycle, by ensuring that requirements are matched to system functions, and functions are matched to components and subsystems, down to the level of assembled parts. This book discusses how Systems Engineering can be suitably deployed and how its benefits are currently being exploited by Product Lifecycle Management. It investigates the fundamentals of Model Based Systems Engineering (MBSE) through a general introduction to this topic and provides two examples of real systems, helping readers understand how these tools are used. The first, which involves the mechatronics of industrial systems, serves to reinforce the main content of the book, while the second describes an industrial implementation of the MBSE tools in the context of developing the on-board systems of a commercial aircraft.

Book Automated Driving

Download or read book Automated Driving written by Daniel Watzenig and published by Springer. This book was released on 2016-09-23 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main topics of this book include advanced control, cognitive data processing, high performance computing, functional safety, and comprehensive validation. These topics are seen as technological bricks to drive forward automated driving. The current state of the art of automated vehicle research, development and innovation is given. The book also addresses industry-driven roadmaps for major new technology advances as well as collaborative European initiatives supporting the evolvement of automated driving. Various examples highlight the state of development of automated driving as well as the way forward. The book will be of interest to academics and researchers within engineering, graduate students, automotive engineers at OEMs and suppliers, ICT and software engineers, managers, and other decision-makers.

Book Mathematical Frameworks For Component Software  Models For Analysis And Synthesis

Download or read book Mathematical Frameworks For Component Software Models For Analysis And Synthesis written by Zhiming Liu and published by World Scientific. This book was released on 2006-11-29 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The range of components technology is both wide and diverse, but some common understanding is emerging through the ideas of model-based development. These include the notions of interfaces, contracts, services, connectors and architectures. Key issues in the application of the technology are becoming clearer, including the consistent integration of different views of a component, component composition, component coordination and transformation for platforms. However, we still know little about theories that support analysis and synthesis of component-based systems. The distinct feature of this volume is its focus on mathematical models that identify the “core” concepts as first class modeling elements, and its providing of techniques for integrating and relating them. The volume contains eleven chapters by well-established researchers writing from different perspectives. Each chapter gives explicit definitions of components in terms of a set of key aspects and addresses some of the problems of integration and analysis of various views: component specification, component composition, component coordination, refinement and substitution, and techniques for solving problems. The concepts and techniques are motivated and explained with the help of examples and case studies.

Book Computer and Information Sciences    ISCIS 2006

Download or read book Computer and Information Sciences ISCIS 2006 written by Albert Levi and published by Springer Science & Business Media. This book was released on 2006-10-24 with total page 1106 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 21st International Symposium on Computer and Information Sciences, ISCIS 2006, held in Istanbul, Turkey in October 2006. The 106 revised full papers presented together with five invited lectures were carefully reviewed and selected from 606 submissions.

Book Component Based Software Engineering

Download or read book Component Based Software Engineering written by Grace A. Lewis and published by Springer. This book was released on 2009-06-18 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2009 Symposium on Component-Based Software Engineering (CBSE 2009) was the 12thin a series ofsuccessful eventsthat havegrowninto the main forum for industrial and academic experts to discuss component technology. Component-based software engineering (CBSE) has emerged as the under- ing technology for the assembly of ?exible software systems. In essence, CBSE is about composing computational building blocks to construct larger building blocks that ful?ll client needs. Most software engineers are involved in some form of component-based development. Nonetheless, the implications of CBSE adoption are wide-reaching and its challenges grow in tandem with its uptake, continuing to inspire our scienti?c speculation. Component-based development necessarily involves elements of software - chitecture, modular software design, software veri?cation, testing, con?guration and deployment. This year’s submissions represent a cross-section of CBSE - search that touches upon all these aspects. The theoretical foundations of c- ponent speci?cation, composition, analysis, and veri?cation continue to pose research challenges. What exactly constitutes an adequate semantics for c- munication and composition so that bigger things can be built from smaller things? How can formal approaches facilitate predictable assembly through b- ter analysis? We have grouped the proceedings into two sub-themes that deal with these issues: component models and communication and composition. At the same time, the world is changing.

Book Model Engineering for Simulation

Download or read book Model Engineering for Simulation written by Lin Zhang and published by Academic Press. This book was released on 2019-02-27 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Engineering for Simulation provides a systematic introduction to the implementation of generic, normalized and quantifiable modeling and simulation using DEVS formalism. It describes key technologies relating to model lifecycle management, including model description languages, complexity analysis, model management, service-oriented model composition, quantitative measurement of model credibility, and model validation and verification. The book clearly demonstrates how to construct computationally efficient, object-oriented simulations of DEVS models on parallel and distributed environments. - Guides systems and control engineers in the practical creation and delivery of simulation models using DEVS formalism - Provides practical methods to improve credibility of models and manage the model lifecycle - Helps readers gain an overall understanding of model lifecycle management and analysis - Supported by an online ancillary package that includes an instructors and student solutions manual

Book Handbook of Real Time and Embedded Systems

Download or read book Handbook of Real Time and Embedded Systems written by Insup Lee and published by CRC Press. This book was released on 2007-07-23 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time and embedded systems are essential to our lives, from controlling car engines and regulating traffic lights to monitoring plane takeoffs and landings to providing up-to-the-minute stock quotes. Bringing together researchers from both academia and industry, the Handbook of Real-Time and Embedded Systems provides comprehensive covera

Book Product Focused Software Process Improvement

Download or read book Product Focused Software Process Improvement written by Michael Felderer and published by Springer. This book was released on 2017-11-10 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 18th International Conference on Product-Focused Software Process Improvement, PROFES 2017, held in Innsbruck, Austria, in November/December 2017. The 17 revised full papers presented together with 10 short papers, 21 workshop papers. 3 posters and tool demonstrations papers, and 4 tutorials were carefully reviewed and selected from 72 submissions. The papers are organized in topical sections on : Agile software Development; Data science and analytics; Software engineering processes and frameworks; Industry relevant qualitative research; User and value centric approaches; Software startups; Serum; Software testing.

Book Scientific and Technical Aerospace Reports

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1990 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: