Download or read book Model Based Definition in the Product Lifecycle written by R L Astheimer and published by . This book was released on 2021-01-05 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Model-Based Definition (MBD) facilitates a seamless transfer of data eliminating error-prone tasks and increasing efficiency throughout the enterprise. Explore the activities that occur throughout a product's lifecycle, the data can be captured in the digital twin, and how it can be re-used. Illustrations and real-world images aid the reader in understanding the activities discussed to give a better understanding of the data available to be used for an effective MBD. As Industry 4.0 begins to take off, the benefits an MBD brings are vital for businesses to remain competitive. Whether you are new to MBD or trying to determine where to apply it, this book will guide you through the possibilities to leverage an MBD.
Download or read book Product Lifecycle Management Enabling Smart X written by Felix Nyffenegger and published by Springer Nature. This book was released on 2020-11-19 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the 17th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2020, held in Rapperswil, Switzerland, in July 2020. The conference was held virtually due to the COVID-19 crisis. The 60 revised full papers presented together with 2 technical industrial papers were carefully reviewed and selected from 80 submissions. The papers are organized in the following topical sections: smart factory; digital twins; Internet of Things (IoT, IIoT); analytics in the order fulfillment process; ontologies for interoperability; tools to support early design phases; new product development; business models; circular economy; maturity implementation and adoption; model based systems engineering; artificial intelligence in CAx, MBE, and PLM; building information modelling; and industrial technical contributions.
Download or read book Product Lifecycle Management Green and Blue Technologies to Support Smart and Sustainable Organizations written by Osiris Canciglieri Junior and published by Springer Nature. This book was released on 2022-02-08 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 639 and 640 constitutes the refereed post-conference proceedings of the 18th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2021, held in Curitiba, Brazil, during July 11-14, 2021. The conference was held virtually due to the COVID-19 crisis. The 107 revised full papers presented in these proceedings were carefully reviewed and selected from 133 submissions. The papers are organized in the following topical sections: Volume I: Sustainability, sustainable development and circular economy; sustainability and information technologies and services; green and blue technologies; AI and blockchain integration with enterprise applications; PLM maturity, PLM implementation and adoption within industry 4.0; and industry 4.0 and emerging technologies: Volume II: Design, education and management; lean, design and innovation technologies; information technology models and design; and models, manufacturing and information technologies and services.
Download or read book Product Lifecycle Management Towards Knowledge Rich Enterprises written by Louis Rivest and published by Springer. This book was released on 2012-12-22 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-proceedings of the 9th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2012, held in Montreal, Canada, in July 2012. The 58 full papers presented were carefully reviewed and selected from numerous submissions. They cover a large range of topics such as collaboration in PLM, tools and methodologies for PLM, modeling for PLM, and PLM implementation issues.
Download or read book Product Lifecycle Management for Society written by Alain Bernard and published by Springer. This book was released on 2013-11-09 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2013, held in Nantes, France, in July 2013. The 63 full papers presented together with 2 keynote talks were carefully reviewed and selected from 91 submissions. They are organized in the following topical sections: PLM for sustainability, traceability and performance; PLM infrastructure and implementation processes; capture and reuse of product and process information; PLM and knowledge management; enterprise system integration; PLM and influence of/from social networks; PLM maturity and improvement concepts; PLM and collaborative product development; PLM virtual and simulation environments; and building information modeling.
Download or read book Product Lifecycle Management for Digital Transformation of Industries written by Ramy Harik and published by Springer. This book was released on 2017-03-15 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 13th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2016, held in Columbia, SC, USA, in July 2016. The 57 revised full papers presented were carefully reviewed and selected from 77 submissions. The papers are organized in the following topical sections: knowledge sharing, re-use and preservation; collaborative development architectures; interoperability and systems integration; lean product development and the role of PLM; PLM and innovation; PLM tools; cloud computing and PLM tools; traceability and performance; building information modeling; big data analytics and business intelligence; information lifecycle management; industry 4.0; metrics, standards and regulation; and product, service and systems.
Download or read book Product Lifecycle Management and the Industry of the Future written by José Ríos and published by Springer. This book was released on 2017-12-19 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the 14th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2017, held in Seville, Spain, in July 2017. The 64 revised full papers presented were carefully reviewed and selected from 78 submissions. The papers are organized in the following topical sections: PLM maturity, implementation and adoption; PLM for digital factories; PLM and process simulation; PLM, CAX and knowledge management; PLM and education; BIM; cyber-physical systems; modular design and products; new product development; ontologies, knowledge and data models; and Product, Service, Systems (PSS).
Download or read book Springer Handbook of Automation written by Shimon Y. Nof and published by Springer Nature. This book was released on 2023-06-16 with total page 1533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook incorporates new developments in automation. It also presents a widespread and well-structured conglomeration of new emerging application areas, such as medical systems and health, transportation, security and maintenance, service, construction and retail as well as production or logistics. The handbook is not only an ideal resource for automation experts but also for people new to this expanding field.
Download or read book Product Lifecycle Management PLM in Transition Times The Place of Humans and Transformative Technologies written by Frédéric Noël and published by Springer Nature. This book was released on 2023-01-31 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 19th IFIP WG 5.1 International Conference, PLM 2022, Grenoble, France, July 10–13, 2022, Revised Selected Papers. The 67 full papers included in this book were carefully reviewed and selected from 94 submissions. They were organized in topical sections as follows: Organisation: Knowledge Management, Business Models, Sustainability, End-to-End PLM, Modelling tools: Model-Based Systems Engineering, Geometric modelling, Maturity models, Digital Chain Process, Transversal Tools: Artificial Intelligence, Advanced Visualization and Interaction, Machine learning, Product development: Design Methods, Building Design, Smart Products, New Product Development, Manufacturing: Sustainable Manufacturing, Lean Manufacturing, Models for Manufacturing.
Download or read book Advances in Manufacturing Technology XXXIII written by Y. Jin and published by IOS Press. This book was released on 2019-08-22 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development and management of technologies and operations are key to the success of all types of manufacturing business. This book presents the proceedings of the 17th International Conference on Manufacturing Research (ICMR 2019), held in Belfast, UK, on 10 – 12 September 2019. ICMR has been the UK’s main manufacturing research conference for 34 years and an international conference since 2003. It brings together researchers, academics and industrialists to share their vision, knowledge and experience and discuss emerging trends and new challenges in manufacturing research. The conference theme of ICMR2019 was smart manufacturing, and the book includes the 82 papers presented at the conference (representing an acceptance rate of 69%). These have been divided into 13 parts, which cover topics ranging from robot automation and machining processes, additive manufacturing, composite manufacturing, design methods, to information management, quality control, production optimization and product lifecycle management. Providing an overview of current trends and developments, the book will be of interest to researchers and engineers in the relevant area of manufacturing processes, design and production management.
Download or read book Product Lifecycle Management in the Digital Twin Era written by Clement Fortin and published by Springer Nature. This book was released on 2020-02-28 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the 16th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2019, held in Moscow, Russia, in July 2019. The 38 revised full papers presented were carefully reviewed and selected from 63 submissions. The papers are organized in the following topical sections: 3D modelling and data structures; PLM maturity and industry 4.0; ontologies and semantics; PLM and conceptual design; knowledge and change management; IoT and PLM; integrating manufacturing realities; and integration of in-service and operation.
Download or read book Transdisciplinary Engineering for Resilience Responding to System Disruptions written by L. Newnes and published by IOS Press. This book was released on 2021-11-17 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: No one discipline or person can encompass all the knowledge necessary to solve complex, ill-defined problems, or problems for which a solution is not immediately obvious. The concept of Concurrent Engineering (CE) – interdisciplinary, but with an engineering focus – was developed to increase the efficiency and effectiveness of the Product Creation Process (PCP) by conducting different phases of a product’s life concurrently. Transdisciplinary Engineering has transcended CE, emphasizing the crucial importance of interdisciplinary openness and collaboration. This book presents the proceedings of the 28th ISTE International Conference on Transdisciplinary Engineering (TE2021). Held online from 5 – 9 July 2021 and entitled ‘Transdisciplinary Engineering for Resilience: Responding to System Disruptions’, this is the second conference in the series held virtually due to the COVID-19 pandemic. The annual TE conference constitutes an important forum for international scientific exchange on transdisciplinary engineering research, advances, and applications, and is attended by researchers, industry experts and students, as well as government representatives. The book contains 58 peer-reviewed papers, selected from more than 80 submissions and ranging from the theoretical and conceptual to strongly pragmatic and addressing industrial best practice. The papers are grouped under 6 headings covering theory; education and training; PD methods and digital TE; industry and society; product systems; and individuals and teams. Providing an overview of the latest research results and knowledge of product creation processes and related methodologies, the book will be of interest to all researchers, design practitioners, and educators working in the field of Transdisciplinary Engineering.
Download or read book Matrix based Product Design and Change Management written by Dunbing Tang and published by Springer. This book was released on 2017-07-10 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces state-of-the-art models and methods based on the matrix in the field of product design and change management. It develops several types of matrix models for a broad range of applications, with the goal of efficiently finding product design solutions and proactively analyzing design change propagation. The book offers readers an extensive introduction to design automation, highlighting fundamental and innovative concepts, as well as cutting-edge technologies. Further, it familiarizes them with the latest advances in design change propagation and prediction. Lastly, the book puts forward design change-oriented matrix models and includes a proactive analysis of change propagation. The book offers a valuable resource for graduate students, researchers and engineers in the fields of product design and methodology, design automation and related areas.
Download or read book Advances in Manufacturing Technology XXXIV written by M. Shafik and published by IOS Press. This book was released on 2021-09-23 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of technologies and management of operations is key to sustaining the success of manufacturing businesses, and since the late 1970s, the International Conference on Manufacturing Research (ICMR) has been a major annual event for academics and industrialists engaged in manufacturing research. The conference is renowned as a friendly and inclusive platform that brings together a broad community of researchers who share a common goal. This book presents the proceedings of ICMR2021, the 18th International Conference on Manufacturing Research, incorporating the 35th National Conference on Manufacturing Research, and held in Derby, UK, from 7 to 10 September 2021. The theme of the ICMR2021 conference is digital manufacturing. Within the context of Industrial 4.0, ICMR2021 provided a platform for researchers, academics and industrialists to share their vision, knowledge and experience, and to discuss emerging trends and new challenges in the field. The 60 papers included in the book are divided into 10 parts, each covering a different area of manufacturing research. These are: digital manufacturing, smart manufacturing; additive manufacturing; robotics and industrial automation; composite manufacturing; machining processes; product design and development; information and knowledge management; lean and quality management; and decision support and production optimization. The book will be of interest to all those involved in developing and managing new techniques in manufacturing industry.
Download or read book Quality Function Deployment and Systems Supportability written by John Longshore and published by CRC Press. This book was released on 2023-11-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book not only presents the overall development of quality function deployment (QFD) and what it has been used for to date but a new product support orientation by which it can be employed. It is product and service “system” focused and presents how blending the processes and elements of supportability and analysis into a QFD-modeled methodology can achieve optimal cost savings and performance efficiency and effectiveness. In addition, a working model is provided that will assist those that elect to use such an approach to current/new product and/or service development. QFD is widely spreading throughout the world because of its outstanding usefulness. It is aimed to fulfill the customer’s expectation of a product or service design. Organizations of all sizes are using it to (1) save product and service design and development time, (2) focus on how the product or service might satisfy the customer and (3) improve communication at all levels of an organization during the development process. Based on these three reasons, today's traditional QFD can be divided into three branches and analyzed. First, QFD can be implemented effectively for developing new products and designs by establishing the linkage between design stages through the manufacturing environment. However, research has found that traditional QFD is quite weak in implementing modifications to existing product and service design during its predicted lifecycle. Second, most research to this point has been squarely focused on the “voice of the customer” for prioritizing customer needs. While certainly needed, the “voice of the system” that is being used to produce the product/service and how they operate during its intended life cycle has been given less attention. Third, QFD is often viewed as overly labor-intensive and thus costly, and, because of its team-based development logic, manual in nature by those involved during its development and implementation. Research has shown that life cycle sustainment planning and support for current or proposed products and/or services requires a seamless and balanced life cycle support methodology. To achieve this type of support, twelve functional elements have been identified that form the product support infrastructure. A new approach, one that views product support as an integrative activity where all twelve product support elements are assessed over the entire product and/or service life cycle is being deployed. With this deployment comes a need to ensure Key Performance Parameters (KPPs) are achieved and functional alignment obtained by balancing supportability element cost and provisioning throughout the entire product and/or service lifecycle, not just during the development stage, and to view the system as the “customer” and thus listen to the “Voice of the System” when assessing supportability requirements. Quality Function Deployment (QFD) is such a tool. This book contains four sections. Section 1 provides an initial overview of QFD origins, and history and highlights some of its use today. It addresses how QFD fits within the organization, increasing revenue, and reducing cost. It outlines a step-by-step strategy for successfully deploying QFD within the organization. Section 2 examines the evolving product and/or service requirement, creating the design solution using QFD, assessing supportability characteristics using QFD, and performing functional supportability analysis using QFD. Section 3 provides a guide for developing the life cycle supportability solution using QFD methodology on an ongoing basis, and managing processes throughout the systems lifecycle. Section 4 addresses using QFD in an imperfect world and will provide insight into how to use QFD beyond the standard “house of quality” concept.
Download or read book Sustainable Production Through Advanced Manufacturing Intelligent Automation and Work Integrated Learning written by J. Andersson and published by IOS Press. This book was released on 2024-05-07 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaboration between those working in product development and production is essential for successful product realization. The Swedish Production Academy (SPA) was founded in 2006 with the aim of driving and developing production research and higher education in Sweden, and increasing national cooperation in research and education within the area of production. This book presents the proceedings of SPS2024, the 11th Swedish Production Symposium, held from 23 to 26 April 2024 in Trollhättan, Sweden. The conference provided a platform for SPA members, as well as for professionals from industry and academia interested in production research and education from around the world, to share insights and ideas. The title and overarching theme of SPS2024 was Sustainable Production through Advanced Manufacturing, Intelligent Automation and Work Integrated Learning, and the conference emphasized stakeholder value, the societal role of industry, worker wellbeing, and environmental sustainability, in alignment with the European Commission's vision for the future of manufacturing. The 59 papers included here were accepted for publication and presentation at the symposium after a thorough review process. They are divided into 6 sections reflecting the thematic areas of the conference, which were: sustainable manufacturing, smart production and automation, digitalization for efficient product realization, circular production, industrial transformation for sustainability, and the integration of education and research. Highlighting the latest developments and advances in automation and sustainable production, the book will be of interest to all those working in the field.
Download or read book Research in Tolerancing written by Sandro Wartzack and published by Springer Nature. This book was released on with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
