Download or read book Model Abstraction in Dynamical Systems Application to Mobile Robot Control written by Patricia Mellodge and published by Springer. This book was released on 2009-08-29 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this book is model abstraction of dynamical systems. The p- mary goal of the work embodied in this book is to design a controller for the mobile robotic car using abstraction. Abstraction provides a means to rep- sent the dynamics of a system using a simpler model while retaining important characteristics of the original system. A second goal of this work is to study the propagation of uncertain initial conditions in the framework of abstraction. The summation of this work is presented in this book. It includes the following: • An overview of the history and current research in mobile robotic control design. • A mathematical review that provides the tools used in this research area. • The development of the robotic car model and both controllers used in the new control design. • A review of abstraction and an extension of these ideas into new system relationship characterizations called traceability and -traceability. • A framework for designing controllers based on abstraction. • An open-loop control design with simulation results. • An investigation of system abstraction with uncertain initial conditions.

Download or read book Model Abstraction in Dynamical Systems Application to Mobile Robot Control written by Patricia Mellodge and published by Springer. This book was released on 2008-09-18 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this book is model abstraction of dynamical systems. The p- mary goal of the work embodied in this book is to design a controller for the mobile robotic car using abstraction. Abstraction provides a means to rep- sent the dynamics of a system using a simpler model while retaining important characteristics of the original system. A second goal of this work is to study the propagation of uncertain initial conditions in the framework of abstraction. The summation of this work is presented in this book. It includes the following: • An overview of the history and current research in mobile robotic control design. • A mathematical review that provides the tools used in this research area. • The development of the robotic car model and both controllers used in the new control design. • A review of abstraction and an extension of these ideas into new system relationship characterizations called traceability and -traceability. • A framework for designing controllers based on abstraction. • An open-loop control design with simulation results. • An investigation of system abstraction with uncertain initial conditions.

Download or read book Reconfigurable Control of Nonlinear Dynamical Systems written by Jan H. Richter and published by Springer. This book was released on 2011-02-02 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research monograph summarizes solutions to reconfigurable fault-tolerant control problems for nonlinear dynamical systems that are based on the fault-hiding principle. It emphasizes but is not limited to complete actuator and sensor failures. In the first part, the monograph starts with a broad introduction of the control reconfiguration problems and objectives as well as summaries and explanations of solutions for linear dynamical systems. The solution is always a reconfiguration block, which consists of linear virtual actuators in the case of actuator faults and linear virtual sensors in the case of sensor faults. The main advantage of the fault-hiding concept is the reusability of the nominal controller, which remains in the loop as an active system while the virtual actuator and sensor adapt the control input and the measured output to the fault scenario. The second and third parts extend virtual actuators and virtual sensors towards the classes of Hammerstein-Wiener systems and piecewise affine systems. The main analyses concern stability recovery, setpoint tracking recovery, and performance recovery as reconfiguration objectives. The fourth part concludes the monograph with descriptions of practical implementations and case studies. The book is primarily intended for active researchers and practicing engineers in the field of fault-tolerant control. Due to many running examples it is also suitable for interested graduate students.

Download or read book Linear Time varying Approximations to Nonlinear Dynamical Systems written by Maria Tomas-Rodriguez and published by Springer. This book was released on 2010-01-12 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linear, Time-varying Approximations to Nonlinear Dynamical Systems introduces a new technique for analysing and controlling nonlinear systems. This method is general and requires only very mild conditions on the system nonlinearities, setting it apart from other techniques such as those – well-known – based on differential geometry. The authors cover many aspects of nonlinear systems including stability theory, control design and extensions to distributed parameter systems. Many of the classical and modern control design methods which can be applied to linear, time-varying systems can be extended to nonlinear systems by this technique. The implementation of the control is therefore simple and can be done with well-established classical methods. Many aspects of nonlinear systems, such as spectral theory which is important for the generalisation of frequency domain methods, can be approached by this method.

Download or read book Analysis and Synthesis of Dynamical Systems with Time Delays written by Yuanqing Xia and published by Springer. This book was released on 2009-10-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time-delay occurs in many dynamical systems such as biological systems, chemical systems, metallurgical processing systems, nuclear reactor, long transmission lines in pneumatic, hydraulic systems and electrical networks. Especially, in recent years, time-delay which exists in networked control s- temshasbroughtmorecomplexproblemintoanewresearcharea.Frequently, itisasourceofthegenerationofoscillation,instabilityandpoorperformance. Considerable e?ort has been applied to di?erent aspects of linear time-delay systems during recent years. Because the introduction of the delay factor renders the system analysis more complicated, in addition to the di?culties caused by the perturbation or uncertainties, in the control of time-delay s- tems, the problems of robust stability and robust stabilization are of great importance. This book presents some basic theories of stability and stabilization of systems with time-delay, which are related to the main results in this book. More attention will be paid on synthesis of systems with time-delay. That is, sliding mode control of systems with time-delay; networked control systems with time-delay; networked data fusion with random delay.

Download or read book Functional Observers for Dynamical Systems written by Hieu Trinh and published by Springer Science & Business Media. This book was released on 2011-09-24 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of linear functional observers, which is the subject of this book, is increasingly becoming a popular researched topic because of the many advantages it presents in state observation and control system design. This book presents recent information on the current state of the art research in this field. This book will serve as a useful reference to researchers in this area of research to understand the fundamental concepts relevant to the theory of functional observers and to gather most recent advancements in the field. This book is useful to academics and postgraduate students researching into the theory of linear functional observers. This book can also be useful for specialized final year undergraduate courses in control systems engineering and applied mathematics with a research focus.

Download or read book Emergent Problems in Nonlinear Systems and Control written by Bijoy Ghosh and published by Springer Science & Business Media. This book was released on 2009-10-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers in this collection partly represent the set of talks that were presented at Texas Tech University on the occasion of Daya’s memorial workshop in the year 2007. Daya had a varied interest in the field of Dynamics and Control Theory and the papers bring out the essence of his involvement in these activities. He also had a large number of collaborators and this collection represent a good fraction of them. The papers included here cover his interest in control theory. Also included are papers from application areas that we believe are of strong interest to him.

Download or read book Nonlinear Model Predictive Control written by Lalo Magni and published by Springer Science & Business Media. This book was released on 2009-05-25 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few years significant progress has been achieved in the field of nonlinear model predictive control (NMPC), also referred to as receding horizon control or moving horizon control. More than 250 papers have been published in 2006 in ISI Journals. With this book we want to bring together the contributions of a diverse group of internationally well recognized researchers and industrial practitioners, to critically assess the current status of the NMPC field and to discuss future directions and needs. The book consists of selected papers presented at the International Workshop on Assessment an Future Directions of Nonlinear Model Predictive Control that took place from September 5 to 9, 2008, in Pavia, Italy.

Download or read book Advances in the Theory of Control Signals and Systems with Physical Modeling written by Jean Levine and published by Springer. This book was released on 2010-10-05 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 60's, control, signals and systems had a common linear algebraic background and, according to their evolution, their respective backgrounds have now dramatically differed. Recovering such a common background, especially in the nonlinear context, is currently a fully open question. The role played by physical models, finite or infinite dimensional, in this hypothetical convergence is extensively discussed in this book. The discussion does not only take place on a theoretical basis but also in the light of two wide classes of applications, among the most active in the current industrially oriented researches: - Electrical and Mechatronical systems; - Chemical Processes and systems appearing in Life Sciences. In this perspective, this book is a contribution to the enhancement of the dialogue between theoretical laboratories and more practically oriented ones and industries. This book is a collection of articles that have been presented by leading international experts at a series of three workshops of a Bernoulli program entitled “Advances in the Theory of Control, Signals and Systems, with Physical Modeling” hosted by the Bernoulli Centre of EPFL during the first semester of 2009. It provides researchers, engineers and graduate students with an unprecedented collection of topics and internationally acknowledged top-quality works and surveys.

Download or read book Time Delay Systems Methods Applications and New Trends written by Rifat Sipahi and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the control and dynamics of time delay systems; a research field with at least six-decade long history that has been very active especially in the past two decades. In parallel to the new challenges emerging from engineering, physics, mathematics, and economics, the volume covers several new directions including topology induced stability, large-scale interconnected systems, roles of networks in stability, and new trends in predictor-based control and consensus dynamics. The associated applications/problems are described by highly complex models, and require solving inverse problems as well as the development of new theories, mathematical tools, numerically-tractable algorithms for real-time control. The volume, which is targeted to present these developments in this rapidly evolving field, captures a careful selection of the most recent papers contributed by experts and collected under five parts: (i) Methodology: From Retarded to Neutral Continuous Delay Models, (ii) Systems, Signals and Applications, (iii): Numerical Methods, (iv) Predictor-based Control and Compensation, and (v) Networked Control Systems and Multi-agent Systems.

Download or read book Automotive Model Predictive Control written by Luigi Del Re and published by Springer Science & Business Media. This book was released on 2010-03-11 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive control has developed over the decades from an auxiliary te- nology to a key element without which the actual performances, emission, safety and consumption targets could not be met. Accordingly, automotive control has been increasing its authority and responsibility – at the price of complexity and di?cult tuning. The progressive evolution has been mainly ledby speci?capplicationsandshorttermtargets,withthe consequencethat automotive control is to a very large extent more heuristic than systematic. Product requirements are still increasing and new challenges are coming from potentially huge markets like India and China, and against this ba- ground there is wide consensus both in the industry and academia that the current state is not satisfactory. Model-based control could be an approach to improve performance while reducing development and tuning times and possibly costs. Model predictive control is a kind of model-based control design approach which has experienced a growing success since the middle of the 1980s for “slow” complex plants, in particular of the chemical and process industry. In the last decades, severaldevelopments haveallowedusing these methods also for “fast”systemsandthis hassupporteda growinginterestinitsusealsofor automotive applications, with several promising results reported. Still there is no consensus on whether model predictive control with its high requi- ments on model quality and on computational power is a sensible choice for automotive control.

Download or read book Pedestrian Dynamics written by Pushkin Kachroo and published by CRC Press. This book was released on 2018-10-03 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homeland security, transportation, and city planning depend upon well-designed evacuation routes. You can’t wait until the day of to realize your plan won’t work. Designing successful evacuation plans requires an in-depth understanding of models and control designs for the problems of traffic flow, construction and road closures, and the intangible human factors. Pedestrian Dynamics: Mathematical Theory and Evacuation Control clearly delineates the derivation of mathematical models for pedestrian dynamics and how to use them to design feedback controls for evacuations. The book includes: Mathematical models derived from basic principles Mathematical analysis of the model Details of past work MATLAB® code 65 figures and 400 equations Unlike most works on traffic flow, this book examines the development of optimal methods to effectively control and improve pedestrian traffic flow. The work of a leading expert, it examines the differential equations applied to conservation laws encountered in the study of pedestrian dynamics and evacuation control problem. The author presents new pedestrian traffic models for multi-directional flow in two dimensions. He considers a range of control models in various simulations, including relaxed models and those concerned with direction and magnitude velocity commands. He also addresses questions of time, cost, and scalability. The book clearly demonstrates what the future challenges are and provides the tools to meet them.

Download or read book Block oriented Nonlinear System Identification written by Fouad Giri and published by Springer Science & Business Media. This book was released on 2010-08-18 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Block-oriented Nonlinear System Identification deals with an area of research that has been very active since the turn of the millennium. The book makes a pedagogical and cohesive presentation of the methods developed in that time. These include: iterative and over-parameterization techniques; stochastic and frequency approaches; support-vector-machine, subspace, and separable-least-squares methods; blind identification method; bounded-error method; and decoupling inputs approach. The identification methods are presented by authors who have either invented them or contributed significantly to their development. All the important issues e.g., input design, persistent excitation, and consistency analysis, are discussed. The practical relevance of block-oriented models is illustrated through biomedical/physiological system modelling. The book will be of major interest to all those who are concerned with nonlinear system identification whatever their activity areas. This is particularly the case for educators in electrical, mechanical, chemical and biomedical engineering and for practising engineers in process, aeronautic, aerospace, robotics and vehicles control. Block-oriented Nonlinear System Identification serves as a reference for active researchers, new comers, industrial and education practitioners and graduate students alike.

Download or read book Perspectives in Mathematical System Theory Control and Signal Processing written by Jan C. Willems and published by Springer. This book was released on 2010-03-10 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift, published on the occasion of the sixtieth birthday of Yutaka - mamoto (‘YY’ as he is occasionally casually referred to), contains a collection of articles by friends, colleagues, and former Ph.D. students of YY. They are a tribute to his friendship and his scienti?c vision and oeuvre, which has been a source of inspiration to the authors. Yutaka Yamamoto was born in Kyoto, Japan, on March 29, 1950. He studied applied mathematics and general engineering science at the Department of Applied Mathematics and Physics of Kyoto University, obtaining the B.S. and M.Sc. degrees in 1972 and 1974. His M.Sc. work was done under the supervision of Professor Yoshikazu Sawaragi. In 1974, he went to the Center for Mathematical System T- ory of the University of Florida in Gainesville. He obtained the M.Sc. and Ph.D. degrees, both in Mathematics, in 1976 and 1978, under the direction of Professor Rudolf Kalman.

Download or read book Analysis and Synthesis of Networked Control Systems written by Yuanqing Xia and published by Springer Science & Business Media. This book was released on 2011-03-14 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Synthesis of Networked Control Systems focuses on essential aspects of this field, including quantization over networks, data fusion over networks, predictive control over networks and fault detection over networks. The networked control systems have led to a complete new range of real-world applications. In recent years, the techniques of Internet of Things are developed rapidly, the research of networked control systems plays a key role in Internet of Things. The book is self-contained, providing sufficient mathematical foundations for understanding the contents of each chapter. It will be of significant interest to scientists and engineers engaged in the field of Networked Control Systems. Dr. Yuanqing Xia, a professor at Beijing Institute of Technology, has been working on control theory and its applications for over ten years.

Download or read book Networked Control Systems written by Alberto Bemporad and published by Springer. This book was released on 2010-10-15 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book nds its origin in the WIDE PhD School on Networked Control Systems, which we organized in July 2009 in Siena, Italy. Having gathered experts on all the aspects of networked control systems, it was a small step to go from the summer school to the book, certainly given the enthusiasm of the lecturers at the school. We felt that a book collecting overviewson the important developmentsand open pr- lems in the eld of networked control systems could stimulate and support future research in this appealing area. Given the tremendouscurrentinterests in distributed control exploiting wired and wireless communication networks, the time seemed to be right for the book that lies now in front of you. The goal of the book is to set out the core techniques and tools that are ava- able for the modeling, analysis and design of networked control systems. Roughly speaking, the book consists of three parts. The rst part presents architectures for distributed control systems and models of wired and wireless communication n- works. In particular, in the rst chapter important technological and architectural aspects on distributed control systems are discussed. The second chapter provides insight in the behavior of communication channels in terms of delays, packet loss and information constraints leading to suitable modeling paradigms for commu- cation networks.

Download or read book Control Technologies for Emerging Micro and Nanoscale Systems written by Evangelos Eleftheriou and published by Springer Science & Business Media. This book was released on 2011-07-15 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a selection of the presentations made at the “Workshop on Dynamics and Control of Micro and Nanoscale Systems” held at IBM Research – Zurich, Switzerland, on the 10th and 11th of December 2009. The aim of the workshop was to bring together some of the leading researchers in the field of dynamics and control of micro- and nanoscale systems. It proved an excellent forum for discussing new ideas and approaches.