Download or read book High Energy and Short Pulse Lasers written by Richard Viskup and published by BoD – Books on Demand. This book was released on 2016-09-07 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives the readers an introduction to experimental and theoretical knowledge acquired by large-scale laser laboratories that are dealing with extra-high peak power and ultrashort laser pulses for research of terawatt (TW), petawatt (PW), or near-future exawatt (EW) laser interactions, for soft X-ray sources, for acceleration of particles, or for generation of hot dense thermal plasma for the laser fusion. The other part of this book is dealing with the small-scale laser laboratories that are using for its research on commercial sources of laser radiation, nanosecond (ns), picosecond (ps), or femtosecond (fs) laser pulses, either for basic research or for more advanced applications. This book is divided into six main sections dealing with short and ultrashort laser pulses, laser-produced soft X-ray sources, large-scale high-power laser systems, free-electron lasers, fiber-based sources of short optical pulse, and applications of short pulse lasers. In each chapter readers can find fascinating topics related to the high energy and/or short pulse laser technique. Individual chapters should serve the broad spectrum of readers of different expertise, layman, undergraduate and postgraduate students, scientists, and engineers, who may in this book find easily explained fundamentals as well as advanced principles of particular subjects related to these phenomena.

Download or read book Current Developments in Optical Fiber Technology written by Sulaiman Wadi Harun and published by BoD – Books on Demand. This book was released on 2013-06-13 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of works presenting recent advances and progress in optical fiber technology related to the next generation optical communication, system and network, sensor, laser, measurement, characterization and devices. It contains five sections including optical fiber communication systems and networks, plastic optical fibers technologies, fiber optic sensors, fiber lasers and fiber measurement techniques and fiber optic devices on silicon chip. Each chapter in this book is a contribution from a group of academicians and scientists from a prominent university or research center, involved in cutting edge research in the field of photonics. This compendium is an invaluable reference for researchers and practitioners working in academic institutions as well as industries.

Download or read book Encyclopedia of Laser Physics and Technology written by Rüdiger Paschotta and published by John Wiley & Sons. This book was released on 2008-12-03 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative two-volume encyclopedia (A-M, N-Z) helps to master the large variety of physical phenomena and technological aspects involved in laser technology and the wider field of photonics. Besides explaining in detail the physical principles and common techniques of laser operation, it also addresses such supplementary topics as ultrashort pulses, optical communications, optoelectronics, general optics, and quantum optics. References to selected scientific articles and textbooks aid readers in their further studies, and the cross-disciplinary approach makes this four-color encyclopedia of huge benefit to a wide audience in industry, government, and academic research.

Download or read book Rare Earth Doped Fiber Lasers and Amplifiers Revised and Expanded written by Michel J.F. Digonnet and published by CRC Press. This book was released on 2001-05-31 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: A discussion of the theories, operating characteristics, and current technology of main fiber laser and amplifier devices based on rare-earth-doped silica and fluorozirconate fibers. It describes the principles, designs, and properties of the erbium-doped fiber amplifier and its role as the cornerstone component in optical communication systems. This second edition contains new and revised material reflecting major developments in academia and industry.

Download or read book Handbook of Laser Micro and Nano Engineering written by KOJI SUGIOKA. and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.

Download or read book Sol Gel Technologies for Glass Producers and Users written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.

Download or read book Laser Systems for Applications written by Krzysztof Jakubczak and published by BoD – Books on Demand. This book was released on 2011-12-14 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses topics related to various laser systems intended for the applications in science and various industries. Some of them are very recent achievements in laser physics (e.g. laser pulse cleaning), while others face their renaissance in industrial applications (e.g. CO2 lasers). This book has been divided into four different sections: (1) Laser and terahertz sources, (2) Laser beam manipulation, (3) Intense pulse propagation phenomena, and (4) Metrology. The book addresses such topics like: Q-switching, mode-locking, various laser systems, terahertz source driven by lasers, micro-lasers, fiber lasers, pulse and beam shaping techniques, pulse contrast metrology, and improvement techniques. This book is a great starting point for newcomers to laser physics.

Download or read book Supercontinuum Generation in Optical Fibers written by J. M. Dudley and published by Cambridge University Press. This book was released on 2010-04-01 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The optical fiber based supercontinuum source has recently become a significant scientific and commercial success, with applications ranging from frequency comb production to advanced medical imaging. This one-of-a-kind book explains the theory of fiber supercontinuum broadening, describes the diverse operational regimes and indicates principal areas of applications, making it a very important guide for researchers and graduate students. With contributions from major figures and groups who have pioneered research in this field, the book describes the historical development of the subject, provides a background to the associated nonlinear optical processes, treats the generation mechanisms from continuous wave to femtosecond pulse pump regimes and highlights the diverse applications. A full discussion of numerical methods and comprehensive computer code are also provided, enabling readers to confidently predict and model supercontinuum generation characteristics under realistic conditions.

Download or read book Shaping Light in Nonlinear Optical Fibers written by Sonia Boscolo and published by John Wiley & Sons. This book was released on 2017-05-30 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a contemporary overview of selected topics in fiber optics. It focuses on the latest research results on light wave manipulation using nonlinear optical fibers, with the aim of capturing some of the most innovative developments on this topic. The book’s scope covers both fundamentals and applications from both theoretical and experimental perspectives, with topics including linear and nonlinear effects, pulse propagation phenomena and pulse shaping, solitons and rogue waves, novel optical fibers, supercontinuum generation, polarization management, optical signal processing, fiber lasers, optical wave turbulence, light propagation in disordered fiber media, and slow and fast light. With contributions from leading-edge scientists in the field of nonlinear photonics and fiber optics, they offer an overview of the latest advances in their own research area. The listing of recent research papers at the end of each chapter is useful for researchers using the book as a reference. As the book addresses fundamental and practical photonics problems, it will also be of interest to, and benefit, broader academic communities, including areas such as nonlinear science, applied mathematics and physics, and optical engineering. It offers the reader a wide and critical overview of the state-of-the-art within this practical – as well as fundamentally important and interesting – area of modern science, providing a useful reference which will encourage further research and advances in the field.

Download or read book Ultrafast Lasers written by Martin E. Fermann and published by CRC Press. This book was released on 2002-10-25 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering high-energy ultrafast amplifiers and solid-state, fiber, and diode lasers, this reference examines recent developments in high-speed laser technology. It presents a comprehensive survey of ultrafast laser technology, its applications, and future trends in various scientific and industrial areas. Topics include: micromachining applications for metals, dielectrics, and biological tissue; advanced electronics and semiconductor processing; optical coherence tomography; multiphoton microscopy; optical sampling and scanning; THz generation and imaging; optical communication systems; absolute phase control of optical signals; and more.

Download or read book Fiber Laser written by Mukul Paul and published by BoD – Books on Demand. This book was released on 2016-03-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a self-contained collection of scholarly papers targeting an audience of practicing researchers, academics, PhD students, and other scientists. This book describes the rapidly developing field of fiber laser technology filling the very important role of providing students, researchers, and technology managers with valuable, timely, and unbiased information on the subject. The objective of this book is to highlight recent progress and trends in fiber laser technology covering a wide range of topics, such as self-pulsing phenomena in high-power continuous wave (CW) Yb-doped fiber lasers, Q-switched fiber laser, mode-locked fiber laser using carbon nanotubes (CNT), properties of double-scale pulses in mode-locked fiber laser, Brillouin fiber laser, dual-wave length fiber laser (DWFL) for microwave (MHz) and terahertz (THz) radiation generation, tunable fiber laser based on twin core optical fiber, reflective semiconductor optical amplifier (RSOA)-based fiber laser, dissipative soliton phenomena in fiber lasers, noiselike pulses (NLPs) in Yb-doped fiber laser, ultra fast fiber laser, numerical simulation in Q-switched and mode-locked fiber laser, gain saturation in optical fiber laser amplifiers, heat generation and removal in fiber lasers, and different fiber laser based technologies for material processing. We hope that this book will be useful for students, researchers, and professionals, who work with fiber lasers. This book will also serve as an interesting and valuable reference that will impact, stimulate, and promote further advances in the area of fiber lasers

Download or read book Fiber Lasers written by Oleg G. Okhotnikov and published by John Wiley & Sons. This book was released on 2012-06-26 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive account of the latest developments and applications in this rapidly developing field, covering a wide range of topics, such as power scaling and short pulse generation, dispersion management and modeling, broadband supercontinuum generation and wavelength tailoring. The book brings together contributions from the world's leading experts at major collaborative research centers throughout Europe, Australia, Russia and the USA. Each chapter presents a tutorial style introduction to the selected topic suitable for scientists, researchers and experts, as well as graduate and postgraduate students with a basic background in optics.

Download or read book Solid State Lasers Materials Technologies and Applications written by Federico Pirzio and published by MDPI. This book was released on 2018-04-24 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Solid State Lasers Materials, Technologies and Applications" that was published in Applied Sciences

Download or read book Optical Fiber Sensor Technology written by L.S. Grattan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in optical fiber sensors The field of optical fiber sensor technology is one that continues to expand and develop at a rate that could barely have been predicted a few years ago. The wealth of publications appearing in the technical literature and the burgeoning number of papers presented at the now well-established series of national and international conferences, which are attended by a wide selection of technically qualified optoelectronics professionals, gives a clear indication of both the range and scale of the devices and applications now seen in the subject. Such a rapid expansion makes it very difficult for the scientist and engineer, under pressure to be both informed and effective for an employer, to attend all these meetings, selectively read the appropriate literature and be able quickly to gain the knowledge in those specific areas which will give the best advantage for the work in hand. To that end, this volume has been planned and carefully designed to provide an essential overview, and detailed specific information, on those novel and exciting aspects of optical fiber sensor technology that have recently emerged, with particular focus on the devices and the exciting applications of this part of optoelectronic technology in the vast international measurement and instrumentation area.

Download or read book Handbook of Laser Technology and Applications written by Chunlei Guo and published by CRC Press. This book was released on 2021-06-23 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook gives a fully updated guide to lasers and laser technologies, including the complete range of their technical applications. The first volume outlines the fundamental components of lasers, their properties, and working principles. Key Features: • Offers a complete update of the original, bestselling work, including many brand-new chapters. • Deepens the introduction to fundamentals, from laser design and fabrication to host matrices for solid-state lasers, energy level diagrams, hosting materials, dopant energy levels, and lasers based on nonlinear effects. • Covers new laser types, including quantum cascade lasers, silicon-based lasers, titanium sapphire lasers, terahertz lasers, bismuth-doped fiber lasers, and diode-pumped alkali lasers. • Discusses the latest applications, e.g., lasers in microscopy, high-speed imaging, attosecond metrology, 3D printing, optical atomic clocks, time-resolved spectroscopy, polarization and profile measurements, pulse measurements, and laser-induced fluorescence detection. • Adds new sections on laser materials processing, laser spectroscopy, lasers in imaging, lasers in environmental sciences, and lasers in communications. This handbook is the ideal companion for scientists, engineers, and students working with lasers, including those in optics, electrical engineering, physics, chemistry, biomedicine, and other relevant areas.

Download or read book Metal Oxide Carbon Hybrid Materials written by Muhammad Akram Chaudhry and published by Elsevier. This book was released on 2022-03-20 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide–Carbon Hybrid Materials: Synthesis, Properties and Applications reviews the advances in the fabrication and application of metal oxide–carbon-based nanocomposite materials. Their unique properties make them ideal materials for gas-sensing, photonics, catalysis, opto-electronic, and energy-storage applications. In the first section, the historical background to the hybrid materials based on metal oxide–carbon and the hybridized metal oxide composites is provided. It also highlights several popular methods for the preparation of metal oxide–carbon composites through solid-state or solution-phase reactions, and extensively discusses the materials' properties. Fossil fuels and renewable energy sources cannot meet the ever-increasing energy demands of an industrialized and technology-driven global society. Therefore, the role of metal oxide–carbon composites in energy generation, hydrogen production, and storage devices, such as rechargeable batteries and supercapacitors, is of extreme importance. These problems are discussed in in the second section of the book. Rapid industrialization has resulted in serious environmental issues which in turn have caused serious health problems that require the immediate attention of researchers. In the third section, the use of metal oxide–carbon composites in water purification, photodegradation of industrial contaminants, and biomedical applications that can help to clean the environment and provide better healthcare solutions is described. The final section is devoted to the consideration of problems associated with the development of sensors for various applications. Numerous studies performed in this area have shown that the use of composites can significantly improve the operating parameters of such devices. Metal Oxide–Carbon Hybrid Materials: Synthesis, Properties and Applications presents a comprehensive review of the science related to metal oxide–carbon composites and how researchers are utilizing these materials to provide solutions to a large array of problems. - Reviews the fundamental properties and fabrication methods of metal-oxide–carbon composites - Discusses applications in energy, including energy generation, hydrogen production and storage, rechargeable batteries, and supercapacitors - Includes current and emerging applications in environmental remediation and sensing

Download or read book Lasers and Current Optical Techniques in Biology written by Giuseppe Palumbo and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of innovative light sources, fibre laser sources and light emitting diodes, is opening unexpected perspectives into optical techniques and is promising new exciting applications in the field of biomedicine. Lasers and Current Optical Techniques in Biology aims to provide an overview of light sources, together with an extensive and authoritative description of the optical techniques in bio-medicine. This book is designed to give biomedical researchers a strong feel for the capability of physical approaches, promote new interdisciplinary interests and persuade more practitioners to take advantage of optical techniques. Current developments in a variety of optical techniques, including Near-Infra Red Spectroscopy, and traditional and advanced fluorescence techniques are covered, ranging from those that are becoming common practice to those that need much more experimentation before they can be accepted as real breakthroughs. Further topics include optical coherence tomography and its variations, polarised light imaging and, principle laser and lamp sources- a usually fragmentary topic, often dispersed among specialist publications. The wide range of topics covered make Lasers and Current Optical Techniques in Biology of interest to a diverse range of scientific communities.