Download or read book Mod lisation num rique du comportement m canique de structures en lastom re written by Stéphane Meo and published by . This book was released on 2000 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dans ce mémoire deux principaux axes sont développés : - Dans un premier temps, on s'intéresse à la modélisation numérique du comportement thermo-mécanique des élastomères. Pour ce faire un modèle mécanique en grandes déformations est proposé et discuté. Il est basé sur les hypothèses classiques de l'état local et des matériaux standards généralisés, et s'appuie sur la notion d'états intermédiaires. On applique alors la méthode des éléments finis à ces équations. Le modèle éléments finis mécanique ainsi obtenu est alors associé, via un algorithme de couplage séquentiel à une formulation éléments finis des équations de la thermique écrites en configuration lagrangienne. Diverses simulations numériques, visant à valider d'une part le comportement écanique, et d'autre part thermo-mécanique, sont présentées et confrontées à des résultats expérimentaux. - Dans un second temps, l'objet du travail concerne la modélisation d'un assemblage de structures composites à matrise élastomère, une à une invariantes dans une direction. La forte hétérogénéité des composantes, rendant impossible la modélisation par homogénéisation périodique, contraint à user du couplage d'une technique de sous structuration classique et d'une méthode de sous structuration multiniveau. La taille des calculs oblige à adopter pour les différents constituants un comportement élastique linéaire. Cependant, une première approche d'un terme de dissipation mécanique, dans le cas de sollicitations périodiques, est proposée en vue d'une éventuel couplage thermo-mécanique.

Download or read book Simulation et analyse num rique du comportement m canique de structures composites written by Hamid Sadouki and published by . This book was released on 1987 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mod lisation num rique du comportement m canique de mat riaux composites matrice lastom rique written by David Delorme and published by . This book was released on 1997 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: CE TRAVAIL EST UNE CONTRIBUTION A L'ETUDE DES COMPOSITES A MATRICE ELASTOMERE. L'APPLICATION INDUSTRIELLE PROPOSEE PAR EUROCOPTER-FRANCE PORTE SUR LE BRAS ELASTOMERIQUE, STRUCTURE ELANCEE CONSTITUEE D'UNE CENTAINE DE BAGUETTES EN COMPOSITE UNIDIRECTIONNEL NOYEES DANS DE L'ELASTOMERE. LES HETEROGENEITES ET LA GEOMETRIE DE LA PIECE POSENT DES PROBLEMES AUX METHODES HABITUELLES DE LA MODELISATION, QUE CE SOIT PAR UNE METHODE ELEMENTS-FINIS DIRECTE OU LA DISCRETISATION CONDUIT A UN TRES GRAND NOMBRE DE DEGRES DE LIBERTE, OU PAR UNE METHODE D'HOMOGENEISATION DONT LE DOMAINE DE VALIDITE EST LIMITE. A TRAVERS UN EXEMPLE REPRESENTATIF OU L'ON FAIT VARIER DIFFERENTS PARAMETRES (NOMBRE DE CELLULES DE BASE, ELANCEMENT DE LA STRUCTURE, RIGIDITE DE L'ELASTOMERE), LES LIMITES DE L'HOMOGENEISATION PERIODIQUE CLASSIQUE APPARAISSENT CLAIREMENT. L'ORIGINALITE DE CE TRAVAIL EST LA PRISE COMPTE D'UN ORDRE SUPERIEUR DES DEVELOPPEMENTS ASYMPTOTIQUES, AINSI QUE DES TERMES DE COUCHES LIMITES AUX EXTREMITES DE LA STRUCTURE. L'APPLICATION DE CES TERMES CORRECTEURS, DETERMINES A PARTIR DE LA RESOLUTION DE NOUVEAUX PROBLEMES MICROSCOPIQUES ET MACROSCOPIQUES, ETEND GRANDEMENT LE DOMAINE DE VALIDITE DE LA METHODE. L'OBTENTION DE RESULTATS DE REFERENCE NECESSITE LA RESOLUTION DU PROBLEME REEL PAR UNE METHODE DIRECTE. UNE ADAPTATION ORIGINALE DE LA TECHNIQUE DE SOUS-STRUCTURATION MULTI-NIVEAUX EST MISE EN OEUVRE POUR EXPLOITER LE PLUS POSSIBLE LES PARTICULARITES DE LA STRUCTURE: SON INVARIANCE SUIVANT UNE DIRECTION ET LE CHARGEMENT UNIQUEMENT A SES EXTREMITES. LA RIGIDIFICATION DE LA STRUCTURE DUE AUX EFFORTS CENTRIFUGES IMPORTANTS EST TRAITEE PAR LA PRISE EN COMPTE DE LA MATRICE DE PRECONTRAINTE A CHAQUE NIVEAU DE SOUS-STRUCTURATION ET L'AMORTISSEMENT STRUCTURAL EST DETERMINE PAR UNE APPROCHE ENERGETIQUE A PARTIR DE L'ENERGIE ELASTIQUE EMMAGASINEE PAR L'ELASTOMERE. CETTE APPROCHE EST VALIDEE PAR UNE ETUDE COMPARATIVE ENTRE LES RESULTATS NUMERIQUES ET DES ESSAIS EXPERIMENTAUX.

Download or read book Artificial Intelligence in Society written by OECD and published by OECD Publishing. This book was released on 2019-06-11 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The artificial intelligence (AI) landscape has evolved significantly from 1950 when Alan Turing first posed the question of whether machines can think. Today, AI is transforming societies and economies. It promises to generate productivity gains, improve well-being and help address global challenges, such as climate change, resource scarcity and health crises.

Download or read book Multibody Dynamics written by Krzysztof Arczewski and published by Springer Science & Business Media. This book was released on 2010-11-08 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ECCOMAS Thematic Conference “Multibody Dynamics 2009” was held in Warsaw, representing the fourth edition of a series which began in Lisbon (2003), and was then continued in Madrid (2005) and Milan (2007), held under the auspices of the European Community on Computational Methods in Applied Sciences (ECCOMAS). The conference provided a forum for exchanging ideas and results of several topics related to computational methods and applications in multibody dynamics, through the participation of 219 scientists from 27 countries, mostly from Europe but also from America and Asia. This book contains the revised and extended versions of invited conference papers, reporting on the state-of-the-art in the advances of computational multibody models, from the theoretical developments to practical engineering applications. By providing a helpful overview of the most active areas and the recent efforts of many prominent research groups in the field of multibody dynamics, this book can be highly valuable for both experienced researches who want to keep updated with the latest developments in this field and researches approaching the field for the first time.

Download or read book Metallurgy and Mechanics of Welding written by Regis Blondeau and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview on the subject of welding. Written by a group of expert contributors, the book covers all welding methods, from traditional to high-energy plasmas and lasers. The reference presents joint welding, stainless steel welding, aluminum welding, welding in the nuclear industry, and all aspects of welding quality control.

Download or read book Government at a Glance Southeast Asia 2019 written by OECD and published by OECD Publishing. This book was released on 2019-09-10 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Government at a Glance Southeast Asia 2019 is the first edition in the Government at a Glance series for the region. It provides the latest available data on public administrations in the 10 ASEAN member countries: Brunei Darussalam, Cambodia, Indonesia, Lao People’s Democratic Republic, Malaysia, Myanmar, the Philippines, Singapore, Thailand and Viet Nam.

Download or read book Fish Protection Technologies and Fish Ways for Downstream Migration written by Ulrich Schwevers and published by Springer. This book was released on 2019-06-24 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive review of current systems for fish protection and downstream migration. It offers the first systematic description of the currently available technologies for fish protection at hydropower intakes, including accurate and timely data collected by the authors and other researchers. It describes how to design and test them in agreement with the guidelines established from the EU Water Framework Directive. The book includes important information about fish biology, with a special focus on swimming and migration mechanisms. It offers a robust bridge between concepts in applied ecology and civil hydraulic engineering, thus providing biologists and hydraulic engineers with an authoritative reference guide to both the theory and practice of fish protection. It is also of interest for planners, public authorities as well as environmental consultants

Download or read book Connected Objects in Health written by Laure Beyala and published by Elsevier. This book was released on 2017-08-10 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Connected objects today present a range of opportunities in medicine. We live in a new digital era where the monitoring and analysis of one's own health information no longer belongs solely to the realm of science fiction. The success of these new devices resides in their usage, which integrates seamlessly into the daily life of the user in order to continually collect the maximum amount of data. These medical connected devices therefore constitute a new hope in transforming user experience as well as the care pathway. They offer a better level of support and a better quality of life for those suffering from chronic illnesses or mental, sensorial or physical disabilities. However, these solutions also pose systematic problems, especially regarding the risks linked to their usage. This book presents a cartography which clearly details all the potential risk scenarios linked to the usage of connected devices as well as the actions which should be undertaken to promote balanced governance and guarantee the development of high-quality medical devices. - Aims to help the reader understand the difference between a connected object and a medical connected device - Identifies and evaluates all the potential risks and perspectives associated with the use of connected medical devices - Shows how to make a comprehensive risk analysis with standards like ISO 31000 and 14971

Download or read book Handbook of Software Solutions for ICME written by Georg J. Schmitz and published by John Wiley & Sons. This book was released on 2016-12-19 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the results of an ambitious project, this handbook provides a well-structured directory of globally available software tools in the area of Integrated Computational Materials Engineering (ICME). The compilation covers models, software tools, and numerical methods allowing describing electronic, atomistic, and mesoscopic phenomena, which in their combination determine the microstructure and the properties of materials. It reaches out to simulations of component manufacture comprising primary shaping, forming, joining, coating, heat treatment, and machining processes. Models and tools addressing the in-service behavior like fatigue, corrosion, and eventually recycling complete the compilation. An introductory overview is provided for each of these different modelling areas highlighting the relevant phenomena and also discussing the current state for the different simulation approaches. A must-have for researchers, application engineers, and simulation software providers seeking a holistic overview about the current state of the art in a huge variety of modelling topics. This handbook equally serves as a reference manual for academic and commercial software developers and providers, for industrial users of simulation software, and for decision makers seeking to optimize their production by simulations. In view of its sound introductions into the different fields of materials physics, materials chemistry, materials engineering and materials processing it also serves as a tutorial for students in the emerging discipline of ICME, which requires a broad view on things and at least a basic education in adjacent fields.

Download or read book Wind Power Integration written by Brendan Fox and published by IET. This book was released on 2007-06-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential book examines the main problems of wind power integration and guides the reader through a number of the most recent solutions based on current research and operational experience of wind power integration.

Download or read book Encyclopedia Of Medical Robotics The In 4 Volumes written by and published by World Scientific. This book was released on 2018-08-28 with total page 1555 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Medical Robotics combines contributions in four distinct areas of Medical robotics, namely: Minimally Invasive Surgical Robotics, Micro and Nano Robotics in Medicine, Image-guided Surgical Procedures and Interventions, and Rehabilitation Robotics. The volume on Minimally Invasive Surgical Robotics focuses on robotic technologies geared towards challenges and opportunities in minimally invasive surgery and the research, design, implementation and clinical use of minimally invasive robotic systems. The volume on Micro and Nano robotics in Medicine is dedicated to research activities in an area of emerging interdisciplinary technology that is raising new scientific challenges and promising revolutionary advancement in applications such as medicine and biology. The size and range of these systems are at or below the micrometer scale and comprise assemblies of micro and nanoscale components. The volume on Image-guided Surgical Procedures and Interventions focuses primarily on the use of image guidance during surgical procedures and the challenges posed by various imaging environments and how they related to the design and development of robotic systems as well as their clinical applications. This volume also has significant contributions from the clinical viewpoint on some of the challenges in the domain of image-guided interventions. Finally, the volume on Rehabilitation Robotics is dedicated to the state-of-the-art of an emerging interdisciplinary field where robotics, sensors, and feedback are used in novel ways to re-learn, improve, or restore functional movements in humans.Volume 1, Minimally Invasive Surgical Robotics, focuses on an area of robotic applications that was established in the late 1990s, after the first robotics-assisted minimally invasive surgical procedure. This area has since received significant attention from industry and researchers. The teleoperated and ergonomic features of these robotic systems for minimally invasive surgery (MIS) have been able to reduce or eliminate most of the drawbacks of conventional (laparoscopic) MIS. Robotics-assisted MIS procedures have been conducted on over 3 million patients to date — primarily in the areas of urology, gynecology and general surgery using the FDA approved da Vinci® surgical system. The significant commercial and clinical success of the da Vinci® system has resulted in substantial research activity in recent years to reduce invasiveness, increase dexterity, provide additional features such as image guidance and haptic feedback, reduce size and cost, increase portability, and address specific clinical procedures. The area of robotic MIS is therefore in a state of rapid growth fueled by new developments in technologies such as continuum robotics, smart materials, sensing and actuation, and haptics and teleoperation. An important need arising from the incorporation of robotic technology for surgery is that of training in the appropriate use of the technology, and in the assessment of acquired skills. This volume covers the topics mentioned above in four sections. The first section gives an overview of the evolution and current state the da Vinci® system and clinical perspectives from three groups who use it on a regular basis. The second focuses on the research, and describes a number of new developments in surgical robotics that are likely to be the basis for the next generation of robotic MIS systems. The third deals with two important aspects of surgical robotic systems — teleoperation and haptics (the sense of touch). Technology for implementing the latter in a clinical setting is still very much at the research stage. The fourth section focuses on surgical training and skills assessment necessitated by the novelty and complexity of the technologies involved and the need to provide reliable and efficient training and objective assessment in the use of robotic MIS systems.In Volume 2, Micro and Nano Robotics in Medicine, a brief historical overview of the field of medical nanorobotics as well as the state-of-the-art in the field is presented in the introductory chapter. It covers the various types of nanorobotic systems, their applications and future directions in this field. The volume is divided into three themes related to medical applications. The first theme describes the main challenges of microrobotic design for propulsion in vascular media. Such nanoscale robotic agents are envisioned to revolutionize medicine by enabling minimally invasive diagnostic and therapeutic procedures. To be useful, nanorobots must be operated in complex biological fluids and tissues, which are often difficult to penetrate. In this section, a collection of four papers review the potential medical applications of motile nanorobots, catalytic-based propelling agents, biologically-inspired microrobots and nanoscale bacteria-enabled autonomous drug delivery systems. The second theme relates to the use of micro and nanorobots inside the body for drug-delivery and surgical applications. A collection of six chapters is presented in this segment. The first chapter reviews the different robot structures for three different types of surgery, namely laparoscopy, catheterization, and ophthalmic surgery. It highlights the progress of surgical microrobotics toward intracorporeally navigated mechanisms for ultra-minimally invasive interventions. Then, the design of different magnetic actuation platforms used in micro and nanorobotics are described. An overview of magnetic actuation-based control methods for microrobots, with eventually biomedical applications, is also covered in this segment. The third theme discusses the various nanomanipulation strategies that are currently used in biomedicine for cell characterization, injection, fusion and engineering. In-vitro (3D) cell culture has received increasing attention since it has been discovered to provide a better simulation environment of in-vivo cell growth. Nowadays, the rapid progress of robotic technology paves a new path for the highly controllable and flexible 3D cell assembly. One chapter in this segment discusses the applications of micro-nano robotic techniques for 3D cell culture using engineering approaches. Because cell fusion is important in numerous biological events and applications, such as tissue regeneration and cell reprogramming, a chapter on robotic-tweezers cell manipulation system to achieve precise laser-induced cell fusion using optical trapping has been included in this volume. Finally, the segment ends with a chapter on the use of novel MEMS-based characterization of micro-scale tissues instead of mechanical characterization for cell lines studies.Volume 3, Image-guided Surgical Procedures and Interventions, focuses on several aspects ranging from understanding the challenges and opportunities in this domain, to imaging technologies, to image-guided robotic systems for clinical applications. The volume includes several contributions in the area of imaging in the areas of X-Ray fluoroscopy, CT, PET, MR Imaging, Ultrasound imaging, and optical coherence tomography. Ultrasound-based diagnostics and therapeutics as well as ultrasound-guided planning and navigation are also included in this volume in addition to multi-modal imaging techniques and its applications to surgery and various interventions. The application of multi-modal imaging and fusion in the area of prostate biopsy is also covered. Imaging modality compatible robotic systems, sensors and actuator technologies for use in the MRI environment are also included in this work., as is the development of the framework incorporating image-guided modeling for surgery and intervention. Finally, there are several chapters in the clinical applications domain covering cochlear implant surgery, neurosurgery, breast biopsy, prostate cancer treatment, endovascular interventions, neurovascular interventions, robotic capsule endoscopy, and MRI-guided neurosurgical procedures and interventions.Volume 4, Rehabilitation Robotics, is dedicated to the state-of-the-art of an emerging interdisciplinary field where robotics, sensors, and feedback are used in novel ways to relearn, improve, or restore functional movements in humans. This volume attempts to cover a number of topics relevant to the field. The first section addresses an important activity in our daily lives: walking, where the neuromuscular system orchestrates the gait, posture, and balance. Conditions such as stroke, vestibular deficits, or old age impair this important activity. Three chapters on robotic training, gait rehabilitation, and cooperative orthoses describe the current works in the field to address this issue. The second section covers the significant advances in and novel designs of soft actuators and wearable systems that have emerged in the area of prosthetic lower limbs and ankles in recent years, which offer potential for both rehabilitation and human augmentation. These are described in two chapters. The next section addresses an important emphasis in the field of medicine today that strives to bring rehabilitation out from the clinic into the home environment, so that these medical aids are more readily available to users. The current state-of-the-art in this field is described in a chapter. The last section focuses on rehab devices for the pediatric population. Their impairments are life-long and rehabilitation robotics can have an even bigger impact during their lifespan. In recent years, a number of new developments have been made to promote mobility, socialization, and rehabilitation among the very young: the infants and toddlers. These aspects are summarized in two chapters of this volume.

Download or read book Wind Turbine Aerodynamics written by HERMAN. SNEL and published by Wiley-Blackwell. This book was released on 2020-02-14 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wind Diesel Systems written by Ray Hunter and published by Cambridge University Press. This book was released on 1994-03-03 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides for the first time in a single volume the collective knowledge of many leading researchers on state-of-the-art wind-diesel technology. It contains the results and advice of nineteen experts from ten different countries, and has been carefully edited to provide a coherent reference volume. This book is the result of a five-year study by a group of experts working on the development of wind-diesel technology under the auspices of the International Energy Agency. The formal, technical aims of this project were as follows: to define cost-effective models and techniques for obtaining wind and load data necessary for planning; to specify decentralised wind-energy conversion system installations; to apply and further develop models suitable for analysing the performance of wind-diesel systems; and to obtain a sound analytical basis for planning and designing wind-diesel systems.

Download or read book Set Valued Force Laws written by Christoph Glocker and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the oldest natural sciences, mechanics occupies a certain pioneering role in determining the development of exact sciences through its interaction with mathematics. As a matter of fact, there is hardly an area in mathematics that hasn't found an application of some form in mechanics. It is thus almost inevitable that theoretical methods in mechanics are highly developed and laid out on different levels of abstraction. With the spread of digital processors this goes as far as the implementation in commercial computer codes, where the user is merely con fronted on the surface with the processes that run in the background, i. e. mechan ics as such: in teaching and research, as well as in the context of industry, me chanics is much more, and must remain much more than the mere production of data with the help of a processor. Mechanics, as it is talked about here, tradition ally includes a wide spectrum, ranging from applied mechanics, analytical and technical mechanics to modeling. and experimental mechanics, as well as technical realization. It also includes the subdisciplines of rigid body mechanics, continuum mechanics, or fluid mechanics, to mention only a few. One of the fundamental and most important concepts used by nearly all natural sciences is the concept of linearization, which assumes the differentiability of mappings. As a matter of fact, all of classical mechanics is based on the avail ability of this quality.

Download or read book Memory Evolutive Systems Hierarchy Emergence Cognition written by A C Ehresmann and published by Elsevier. This book was released on 2007-05-25 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Memory Evolutive Systems; Hierarchy, Emergence, Cognition provides comprehensive and comprehensible coverage of Memory Evolutive Systems (MEM). Written by the developers of the MEM, the book proposes a mathematical model for autonomous evolutionary systems based on the Category Theory of mathematics. It describes a framework to study and possibly simulate the structure of living systems and their dynamic behavior. This book contributes to understanding the multidisciplinary interfaces between mathematics, cognition, consciousness, biology and the study of complexity. It is organized into three parts. Part A deals with hierarchy and emergence and covers such topics as net of interactions and categories; the binding problem; and complexifications and emergence. Part B is about MEM while Part C discusses MEM applications to cognition and consciousness. The book explores the characteristics of a complex evolutionary system, its differences from inanimate physical systems, and its functioning and evolution in time, from its birth to its death. This book is an ideal reference for researchers, teachers and students in pure mathematics, computer science, cognitive science, study of complexity and systems theory, Category Theory, biological systems theory, and consciousness theory. It would also be of interest to both individuals and institutional libraries. - Comprehensive and comprehensible coverage of Memory Evolutive System - Written by the developers of the Memory Evolutive Systems - Designed to explore the common language between sciences

Download or read book From Technological to Virtual Art written by Frank Popper and published by . This book was released on 2007 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frank Popper traces the development of immersive, interactive new media art from its antecedents through today's digital, multimedia, & networked art.