Download or read book Distributed Power Amplifiers for RF and Microwave Communications written by Narendra Kumar and published by Artech House. This book was released on 2015-06-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new resource presents readers with all relevant information and comprehensive design methodology of wideband amplifiers. This book specifically focuses on distributed amplifiers and their main components, and presents numerous RF and microwave applications including well-known historical and recent architectures, theoretical approaches, circuit simulation, and practical implementation techniques. A great resource for practicing designers and engineers, this book contains numerous well-known and novel practical circuits, architectures, and theoretical approaches with detailed description of their operational principles.

Download or read book Broadband RF and Microwave Amplifiers written by Andrei Grebennikov and published by CRC Press. This book was released on 2017-07-12 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadband RF and Microwave Amplifiers provides extensive coverage of broadband radio frequency (RF) and microwave power amplifier design, including well-known historical and recent novel schematic configurations, theoretical approaches, circuit simulation results, and practical implementation strategies. The text begins by introducing two-port networks to illustrate the behavior of linear and nonlinear circuits, explaining the basic principles of power amplifier design, and discussing impedance matching and broadband power amplifier design using lumped and distributed parameters. The book then: Shows how dissipative or lossy gain-compensation-matching circuits can offer an important trade-off between power gain, reflection coefficient, and operating frequency bandwidth Describes the design of broadband RF and microwave amplifiers using real frequency techniques (RFTs), supplying numerous examples based on the MATLAB® programming process Examines Class-E power amplifiers, Doherty amplifiers, low-noise amplifiers, microwave gallium arsenide field-effect transistor (GaAs FET)-distributed amplifiers, and complementary metal-oxide semiconductor (CMOS) amplifiers for ultra-wideband (UWB) applications Broadband RF and Microwave Amplifiers combines theoretical analysis with practical design to create a solid foundation for innovative ideas and circuit design techniques.

Download or read book Nitride Semiconductor Devices written by Joachim Piprek and published by John Wiley & Sons. This book was released on 2007-04-09 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to be published on physical principles, mathematical models, and practical simulation of GaN-based devices. Gallium nitride and its related compounds enable the fabrication of highly efficient light-emitting diodes and lasers for a broad spectrum of wavelengths, ranging from red through yellow and green to blue and ultraviolet. Since the breakthrough demonstration of blue laser diodes by Shuji Nakamura in 1995, this field has experienced tremendous growth worldwide. Various applications can be seen in our everyday life, from green traffic lights to full-color outdoor displays to high-definition DVD players. In recent years, nitride device modeling and simulation has gained importance and advanced software tools are emerging. Similar developments occurred in the past with other semiconductors such as silicon, where computer simulation is now an integral part of device development and fabrication. This book presents a review of modern device concepts and models, written by leading researchers in the field. It is intended for scientists and device engineers who are interested in employing computer simulation for nitride device design and analysis.

Download or read book Concepts and Applications of MICROWAVE ENGINEERING written by SANJAY KUMAR and published by PHI Learning Pvt. Ltd.. This book was released on 2014-04-02 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is primarily designed to cater to the needs of undergraduate and postgraduate students of Electronics and Communication Engineering and allied branches. The book has been written keeping average students in mind. This well-organised and lucidly written text gives a comprehensive view of microwave concepts covering its vast spectrum, transmission line, network analysis, microwave tubes, microwave solid-state devices, microwave measurement techniques, microwave antenna theories, radars and satellite communication. KEY FEATURES • A fairly large number of well-labelled diagrams provides practical understanding of the concepts. • Solved numerical problems aptly crafted and placed right after conceptual discussion provide better comprehension of the subject matter. • Chapter summary highlights important points for quick recap and revision before examination. • About 200 MCQs with answers help students to prepare for competitive examinations. • Appropriate number of unsolved numerical problems with answers improves problem solving skill of students. • Simplified complex mathematical derivations by synthesising them in smaller parts for easy grasping. Audience Undergraduate and Postgraduate students of Electronics and Communication Engineering and allied branches

Download or read book advances in microwaves and lightwaves written by and published by Allied Publishers. This book was released on with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gallium Nitride GaN written by Farid Medjdoub and published by CRC Press. This book was released on 2017-12-19 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses a Growing Need for High-Power and High-Frequency Transistors Gallium Nitride (GaN): Physics, Devices, and Technology offers a balanced perspective on the state of the art in gallium nitride technology. A semiconductor commonly used in bright light-emitting diodes, GaN can serve as a great alternative to existing devices used in microelectronics. It has a wide band gap and high electron mobility that gives it special properties for applications in optoelectronic, high-power, and high-frequency devices, and because of its high off-state breakdown strength combined with excellent on-state channel conductivity, GaN is an ideal candidate for switching power transistors. Explores Recent Progress in High-Frequency GaN Technology Written by a panel of academic and industry experts from around the globe, this book reviews the advantages of GaN-based material systems suitable for high-frequency, high-power applications. It provides an overview of the semiconductor environment, outlines the fundamental device physics of GaN, and describes GaN materials and device structures that are needed for the next stage of microelectronics and optoelectronics. The book details the development of radio frequency (RF) semiconductor devices and circuits, considers the current challenges that the industry now faces, and examines future trends. In addition, the authors: Propose a design in which multiple LED stacks can be connected in a series using interband tunnel junction (TJ) interconnects Examine GaN technology while in its early stages of high-volume deployment in commercial and military products Consider the potential use of both sunlight and hydrogen as promising and prominent energy sources for this technology Introduce two unique methods, PEC oxidation and vapor cooling condensation methods, for the deposition of high-quality oxide layers A single-source reference for students and professionals, Gallium Nitride (GaN): Physics, Devices, and Technology provides an overall assessment of the semiconductor environment, discusses the potential use of GaN-based technology for RF semiconductor devices, and highlights the current and emerging applications of GaN.

Download or read book Fundamentals of RF and Microwave Techniques and Technologies written by Hans L. Hartnagel and published by Springer Nature. This book was released on 2023-07-28 with total page 1554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase of consumer, medical and sensors electronics using radio frequency (RF) and microwave (MW) circuits has implications on overall performances if design is not robust and optimized for a given applications. The current and later generation communication systems and Internet of Thing (IoT) demand for robust electronic circuits with optimized performance and functionality, but low cost, size, and power consumption. As a result, there is a need for a textbook that provides a comprehensive treatment of the subject. This book provides state-of-the-art coverage of RF and Microwave Techniques and Technologies, covers important topics: transmission-line theory, passive and semiconductor devices, active and passive microwave circuits and receiver systems, as well as antennas, noise and digital signal modulation schemes. With an emphasis on theory, design, and applications, this book is targeted to students, teachers, scientists, and practicing design engineers who are interested in broadening their knowledge of RF and microwave electronic circuit design. Readers will also benefit from a unique integration of theory and practice, provides the readers a solid understanding of the RF and microwave concepts, active and passive components, antenna, and modulation schemes. Readers will learn to solve common design problems ranging from selection of components, matching networks to biasing and stability, and digital modulation techniques. More importantly, it provides basic understanding in the analysis and design of RF and microwave circuits in a manner that is practiced in industry. This make sure that the know-how learned in this book can be effortlessly and straightway put into practice without any obstacles.

Download or read book Innovations in Ultra Wideband Technologies written by Albert Sabban and published by BoD – Books on Demand. This book was released on 2021-07-28 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses innovation in ultra-wideband (UWB) technologies and systems. Divided into four sections, the volume introduces UWB technologies and RF modules, examines applications of these systems in areas such as medicine and sports, and discusses the importance of an accurate design of microwave modules and antennas.

Download or read book Wearable Systems and Antennas Technologies for 5G IOT and Medical Systems written by Albert Sabban and published by CRC Press. This book was released on 2020-12-08 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to progress in the development of communication systems, it is now possible to develop low-cost wearable communication systems. A wearable antenna is meant to be a part of the clothing or close to the body and used for communication purposes, which include tracking and navigation, mobile computing and public safety. Examples include smartwatches (with integrated Bluetooth antennas), glasses (such as Google Glass with Wi-Fi and GPS antennas), GoPro action cameras (with Wi-Fi and Bluetooth antennas), etc. They are increasingly common in consumer electronics and for healthcare and medical applications. However, the development of compact, efficient wearable antennas is one of the major challenges in the development of wearable communication and medical systems. Technologies such as printed compact antennas and miniaturization techniques have been developed to create efficient, small wearable antennas which are the main objective of this book. Each chapter covers enough mathematical detail and explanations to enable electrical, electromagnetic and biomedical engineers and students and scientists from all areas to follow and understand the topics presented. New topics and design methods are presented for the first time in the area of wearable antennas, metamaterial antennas and fractal antennas. The book covers wearable antennas, RF measurements techniques and measured results in the vicinity of the human body, setups and design considerations. The wearable antennas and devices presented in this book were analyzed by using HFSS and ADS 3D full-wave electromagnetics software. Explores wearable medical systems and antennas Explains the design and development of wearable communication systems Explores wearable reconfigurable antennas for communication and medical applications Discusses new types of metamaterial antennas and artificial magnetic conductors (AMC) Reviews textile antennas Dr. Albert Sabban holds a PhD in Electrical Engineering from the University of Colorado at Boulder, USA (1991), and an MBA from the Faculty of Management, Haifa University, Israel (2005). He is currently a Senior Lecturer and researcher at the Department of Electrical and Electronic Engineering at Kinneret and Ort Braude Engineering Colleges.

Download or read book III Nitride Electronic Devices written by and published by Academic Press. This book was released on 2019-10-18 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: III-Nitride Electronic Devices, Volume 102, emphasizes two major technical areas advanced by this technology: radio frequency (RF) and power electronics applications. The range of topics covered by this book provides a basic understanding of materials, devices, circuits and applications while showing the future directions of this technology. Specific chapters cover Electronic properties of III-nitride materials and basics of III-nitride HEMT, Epitaxial growth of III-nitride electronic devices, III-nitride microwave power transistors, III-nitride millimeter wave transistors, III-nitride lateral transistor power switch, III-nitride vertical devices, Physics-Based Modeling, Thermal management in III-nitride HEMT, RF/Microwave applications of III-nitride transistor/wireless power transfer, and more. - Presents a complete review of III-Nitride electronic devices, from fundamental physics, to applications in two key technical areas – RF and power electronics - Outlines fundamentals, reviews state-of-the-art circuits and applications, and introduces current and emerging technologies - Written by a panel of academic and industry experts in each field

Download or read book Millimeter Wave Low Noise Amplifiers written by Mladen Božanić and published by Springer. This book was released on 2017-11-30 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first standalone book that combines research into low-noise amplifiers (LNAs) with research into millimeter-wave circuits. In compiling this book, the authors have set two research objectives. The first is to bring together the research context behind millimeter-wave circuit operation and the theory of low-noise amplification. The second is to present new research in this multi-disciplinary field by dividing the common LNA configurations and typical specifications into subsystems, which are then optimized separately to suggest improvements in the current state-of-the-art designs. To achieve the second research objective, the state-of-the-art LNA configurations are discussed and the weaknesses of state-of the art configurations are considered, thus identifying research gaps. Such research gaps, among others, point towards optimization – at a systems and microelectronics level. Optimization topics include the influence of short wavelength, layout and crosstalk on LNA performance. Advanced fabrication technologies used to decrease the parasitics of passive and active devices are also explored, together with packaging technologies such as silicon-on-chip and silicon-on-package, which are proposed as alternatives to traditional IC implementation. This research outcome builds through innovation. Innovative ideas for LNA construction are explored, and alternative design methodologies are deployed, including LNA/antenna co-design or utilization of the electronic design automation in the research flow. The book also offers the authors’ proposal for streamlined automated LNA design flow, which focuses on LNA as a collection of highly optimized subsystems.

Download or read book The Electrical Engineering Handbook Six Volume Set written by Richard C. Dorf and published by CRC Press. This book was released on 2018-12-14 with total page 3672 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two editions spanning more than a decade, The Electrical Engineering Handbook stands as the definitive reference to the multidisciplinary field of electrical engineering. Our knowledge continues to grow, and so does the Handbook. For the third edition, it has grown into a set of six books carefully focused on specialized areas or fields of study. Each one represents a concise yet definitive collection of key concepts, models, and equations in its respective domain, thoughtfully gathered for convenient access. Combined, they constitute the most comprehensive, authoritative resource available. Circuits, Signals, and Speech and Image Processing presents all of the basic information related to electric circuits and components, analysis of circuits, the use of the Laplace transform, as well as signal, speech, and image processing using filters and algorithms. It also examines emerging areas such as text to speech synthesis, real-time processing, and embedded signal processing. Electronics, Power Electronics, Optoelectronics, Microwaves, Electromagnetics, and Radar delves into the fields of electronics, integrated circuits, power electronics, optoelectronics, electromagnetics, light waves, and radar, supplying all of the basic information required for a deep understanding of each area. It also devotes a section to electrical effects and devices and explores the emerging fields of microlithography and power electronics. Sensors, Nanoscience, Biomedical Engineering, and Instruments provides thorough coverage of sensors, materials and nanoscience, instruments and measurements, and biomedical systems and devices, including all of the basic information required to thoroughly understand each area. It explores the emerging fields of sensors, nanotechnologies, and biological effects. Broadcasting and Optical Communication Technology explores communications, information theory, and devices, covering all of the basic information needed for a thorough understanding of these areas. It also examines the emerging areas of adaptive estimation and optical communication. Computers, Software Engineering, and Digital Devices examines digital and logical devices, displays, testing, software, and computers, presenting the fundamental concepts needed to ensure a thorough understanding of each field. It treats the emerging fields of programmable logic, hardware description languages, and parallel computing in detail. Systems, Controls, Embedded Systems, Energy, and Machines explores in detail the fields of energy devices, machines, and systems as well as control systems. It provides all of the fundamental concepts needed for thorough, in-depth understanding of each area and devotes special attention to the emerging area of embedded systems. Encompassing the work of the world's foremost experts in their respective specialties, The Electrical Engineering Handbook, Third Edition remains the most convenient, reliable source of information available. This edition features the latest developments, the broadest scope of coverage, and new material on nanotechnologies, fuel cells, embedded systems, and biometrics. The engineering community has relied on the Handbook for more than twelve years, and it will continue to be a platform to launch the next wave of advancements. The Handbook's latest incarnation features a protective slipcase, which helps you stay organized without overwhelming your bookshelf. It is an attractive addition to any collection, and will help keep each volume of the Handbook as fresh as your latest research.

Download or read book Low Visibility Antennas for Communication Systems written by Albert Sabban and published by CRC Press. This book was released on 2015-09-18 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-visibility antennas have many attractive features, such as being low-profile, flexible, lightweight, small-volume, and low-cost. Low-Visibility Antennas for Communication Systems provides explicit guidelines for the development of these antennas. Offering valuable insight into emerging antenna technologies, the book:Introduces the fundamental t

Download or read book Technologies for RF Systems written by Terry Edwards and published by Artech House. This book was released on 2018-04-30 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive resource provides an introduction to the main concepts, technologies, and components in microwave and RF engineering. This book presents details about how to design various amplifiers, circuits, and chips for communication systems. It offers insight into selecting appropriate ADC and DAC technology. Several worked examples are found throughout the book. This book provides a summary of 21st century RF systems and electronics and discusses the challenges of frequency bands and wavelengths, software-defined radio (SDR) and cognitive radio. RF semiconductors are covered, including bandgap, drift velocity, resistors, diodes, and various transistors. This book offers details about passive RF components, capacitors, inductors, resistors, coaxial, and microstrip lines as well as coplanar waveguide. Passive RF circuit elements are presented and this book covers the fundamentals of directional couplers, including Lange couplers and Wilkinson dividers. Switches, attenuators, and digital circuits are discussed. This book is packed with additional coverage of RF filters, antennas, and small-signal RF amplifiers, and includes chapters on noise and LNAs, RF power amplifiers and RF-oriented ADCs and DACs. Modulation techniques and technologies are also presented.

Download or read book Distributed Transformers for Broadband Monolithic Millimeter Wave Integrated Power Amplifiers written by Pahl, Kai-Philipp Walter and published by KIT Scientific Publishing. This book was released on 2015-09-18 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents methods and techniques to optimize and implement distributed magnetic transformers for their application in matching networks of Monolithic Millimeter-wave Integrated Circuits (MMICs). It describes strategies for the efficiency and bandwidth optimization of the transformers and demonstrates their potential based on an optimized transformer geometry as well as two MMIC power amplifiers.

Download or read book Handbook of RF and Microwave Power Amplifiers written by John L. B. Walker and published by Cambridge University Press. This book was released on 2012 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a one-stop guide for circuit designers and system/device engineers, covering everything from CAD to reliability.

Download or read book New Materials and Devices Enabling 5G Applications and Beyond written by Nadine Collaert and published by Elsevier. This book was released on 2024-01-24 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Materials and Devices for 5G Applications and Beyond focuses on the materials, device architectures and enabling integration schemes for 5G applications and emerging technologies. It gives a comprehensive overview of the trade-offs, challenges and unique properties of novel upcoming technologies. Starting from the application side and its requirements, the book examines different technologies under consideration for the different functions, both more conventional to exploratory, and within this context the book provides guidance to the reader on how to possibly optimize the system for a particular application. This book aims at guiding the reader through the technologies required to enable 5G applications, with the main focus on mm-wave frequencies, up to THz. New Materials and Devises for 5G Applications and Beyond is suitable for industrial researchers and development engineers, and researchers in materials science, device engineering and circuit design. - Reviews challenges and emerging opportunities for materials, devices, and integration to enable 5G technologies - Includes discussion of technologies such as RF-MEMs, RF FINFETs, and transistors based on current and emerging materials (InP, GaN, etc.) - Focuses on mm-wave frequencies up to the terahertz regime