Download or read book Mixture Desigh sic and Performance Prediction of Rubber modified Asphalt in Ohio written by Robert Y. Liang and published by . This book was released on 1998 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mixture design and performance characteristics of crumb rubber modified asphalt concretes were investigated in this research project to meet the requirements of the Intermodal Surface Transportation Efficiency Act (ISTEA) of 1991, which has required each State to incorporate scrap tire rubber into its asphalt paving materials. Specifically, the objectives of this research encompass the following: (i) investigation of the rheological properties of asphalt-rubber binder to determine optimum content of crumb rubber; (ii) development of optimum mix design for various applications, including both wet and dry mix processes; (iii) characterization of mechanical properties of recommended paving mixtures, including resilient modulus, fatigue cracking behavior, low-temperature thermal cracking resistance, water sensitivity test, incremental creep test and loaded wheel track test; and (iv) comparison of performance of selected paving mixes.
Download or read book Handbook for Stabilization of Pavement Subgrades and Base Courses with Lime written by Dallas N. Little and published by . This book was released on 1995 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Fluid Film Lubrication written by Bernard J. Hamrock and published by CRC Press. This book was released on 2004-03-15 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically focusing on fluid film, hydrodynamic, and elastohydrodynamic lubrication, this edition studies the most important principles of fluid film lubrication for the correct design of bearings, gears, and rolling operations, and for the prevention of friction and wear in engineering designs. It explains various theories, procedures, and equations for improved solutions to machining challenges. Providing more than 1120 display equations and an introductory section in each chapter, Fundamentals of Fluid Film Lubrication, Second Edition facilitates the analysis of any machine element that uses fluid film lubrication and strengthens understanding of critical design concepts.
Download or read book The Aggregates Handbook Second Edition written by National Stone, Sand & Gravel Association and published by . This book was released on 2013-03-20 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Urban Stormwater Management in the United States written by National Research Council and published by National Academies Press. This book was released on 2009-03-17 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid conversion of land to urban and suburban areas has profoundly altered how water flows during and following storm events, putting higher volumes of water and more pollutants into the nation's rivers, lakes, and estuaries. These changes have degraded water quality and habitat in virtually every urban stream system. The Clean Water Act regulatory framework for addressing sewage and industrial wastes is not well suited to the more difficult problem of stormwater discharges. This book calls for an entirely new permitting structure that would put authority and accountability for stormwater discharges at the municipal level. A number of additional actions, such as conserving natural areas, reducing hard surface cover (e.g., roads and parking lots), and retrofitting urban areas with features that hold and treat stormwater, are recommended.
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book Simple Performance Test for Superpave Mix Design written by Matthew W. Witzcak and published by Transportation Research Board. This book was released on 2002 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Resistance of Concrete to Freezing and Thawing written by Donald J. Janssen and published by Strategic Highway Research Program (Shrp). This book was released on 1994 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study, aimed at improving the freeze-thaw resistance of concrete, consists of three parts. Part I evaluates parameters affecting the freeze-thaw durability of concrete. A modification of the existing standard of method for determining the durability factor of concrete specimens is proposed, and a new procedure for fundamental transverse frequency (used in durability factor calculations) has been developed. Part II focuses on developing better methods for identifying nondurable aggregates, and has resulted in a rapid new test based on the hydraulic fracture of aggregates. Part III describes field experiments to evaluate the freeze-thaw resistance of a number of specified concrete mixes and the use of sealants to mitigate D-cracking. Preliminary field performance results are presented.
Download or read book Transportation Planning Handbook written by ITE (Institute of Transportation Engineers) and published by John Wiley & Sons. This book was released on 2016-08-01 with total page 1204 pages. Available in PDF, EPUB and Kindle. Book excerpt: A multi-disciplinary approach to transportation planning fundamentals The Transportation Planning Handbook is a comprehensive, practice-oriented reference that presents the fundamental concepts of transportation planning alongside proven techniques. This new fourth edition is more strongly focused on serving the needs of all users, the role of safety in the planning process, and transportation planning in the context of societal concerns, including the development of more sustainable transportation solutions. The content structure has been redesigned with a new format that promotes a more functionally driven multimodal approach to planning, design, and implementation, including guidance toward the latest tools and technology. The material has been updated to reflect the latest changes to major transportation resources such as the HCM, MUTCD, HSM, and more, including the most current ADA accessibility regulations. Transportation planning has historically followed the rational planning model of defining objectives, identifying problems, generating and evaluating alternatives, and developing plans. Planners are increasingly expected to adopt a more multi-disciplinary approach, especially in light of the rising importance of sustainability and environmental concerns. This book presents the fundamentals of transportation planning in a multidisciplinary context, giving readers a practical reference for day-to-day answers. Serve the needs of all users Incorporate safety into the planning process Examine the latest transportation planning software packages Get up to date on the latest standards, recommendations, and codes Developed by The Institute of Transportation Engineers, this book is the culmination of over seventy years of transportation planning solutions, fully updated to reflect the needs of a changing society. For a comprehensive guide with practical answers, The Transportation Planning Handbook is an essential reference.
Download or read book Industrial Burners Handbook written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2003-10-29 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid development in the field precipitated by the increased demand for clean burner systems has made the Industrial Burners Handbook into the fields go-to resource. With this resource, bestselling author, editor, and combustion expert Charles Baukal, Jr. has put together a comprehensive reference dedicated to the design and applications of indust
Download or read book Advanced Materials by Design written by and published by . This book was released on 1988 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.
Download or read book Lining of Waste Impoundment and Disposal Facilities written by and published by . This book was released on 1980 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidance Manual for Developing Best Management Practices BMP written by and published by . This book was released on 1993 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Corrosion Engineering written by Pierre Roberge and published by McGraw-Hill Prof Med/Tech. This book was released on 1999-09-30 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reduce the enormous economic and environmental impact of corrosion Emphasizing quantitative techniques, this guide provides you with: *Theory essential for understanding aqueous, atmospheric, and high temperature corrosion processes Corrosion resistance data for various materials Management techniques for dealing with corrosion control, including life prediction and cost analysis, information systems, and knowledge re-use Techniques for the detection, analysis, and prevention of corrosion damage, including protective coatings and cathodic protection More
Download or read book Standard Practice for Concrete written by United States. Army. Corps of Engineers and published by . This book was released on 1974 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book To Life written by Linda Weintraub and published by Univ of California Press. This book was released on 2012-09-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title documents the burgeoning eco art movement from A to Z, presenting a panorama of artistic responses to environmental concerns, from Ant Farms anti-consumer antics in the 1970s to Marina Zurkows 2007 animation that anticipates the havoc wreaked upon the planet by global warming.
