Download or read book Mixed Signal Methodology Guide written by Jess Chen and published by Lulu.com. This book was released on 2012 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the Mixed-signal Methodology Guide: Advanced Methodology for AMS IP and SoC Design, Verification, and Implementation provides a broad overview of the design, verification and implementation methodologies required for today's mixed-signal designs. The book covers mixed-signal design trends and challenges, abstraction of analog using behavioral models, assertion-based metric-driven verification methodology applied on analog and mixed-signal and verification of low power intent in mixed-signal design. It also describes methodology for physical implementation in context of concurrent mixed-signal design and for handling advanced node physical effects. The book contains many practical examples of models and techniques. The authors believe it should serve as a reference to many analog, digital and mixed-signal designers, verification, physical implementation engineers and managers in their pursuit of information for a better methodology required to address the challenges of modern mixed-signal design.

Download or read book The System Designer s Guide to VHDL AMS written by Peter J. Ashenden and published by Elsevier. This book was released on 2002-09-10 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand is exploding for complete, integrated systems that sense, process, manipulate, and control complex entities such as sound, images, text, motion, and environmental conditions. These systems, from hand-held devices to automotive sub-systems to aerospace vehicles, employ electronics to manage and adapt to a world that is, predominantly, neither digital nor electronic. To respond to this design challenge, the industry has developed and standardized VHDL-AMS, a unified design language for modeling digital, analog, mixed-signal, and mixed-technology systems. VHDL-AMS extends VHDL to bring the successful HDL modeling methodology of digital electronic systems design to these new design disciplines.Gregory Peterson and Darrell Teegarden join best-selling author Peter Ashenden in teaching designers how to use VHDL-AMS to model these complex systems. This comprehensive tutorial and reference provides detailed descriptions of both the syntax and semantics of the language and of successful modeling techniques. It assumes no previous knowledge of VHDL, but instead teaches VHDL and VHDL-AMS in an integrated fashion, just as it would be used by designers of these complex, integrated systems. Explores the design of an electric-powered, unmanned aerial vehicle system (UAV) in five separate case studies to illustrate mixed-signal, mixed-technology, power systems, communication systems, and full system modeling.

Download or read book The Designer s Guide to Verilog AMS written by Ken Kundert and published by Springer Science & Business Media. This book was released on 2005-12-19 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Verilog Hardware Description Language (Verilog-HDL) has long been the most popular language for describing complex digital hardware. It started life as a prop- etary language but was donated by Cadence Design Systems to the design community to serve as the basis of an open standard. That standard was formalized in 1995 by the IEEE in standard 1364-1995. About that same time a group named Analog Verilog International formed with the intent of proposing extensions to Verilog to support analog and mixed-signal simulation. The first fruits of the labor of that group became available in 1996 when the language definition of Verilog-A was released. Verilog-A was not intended to work directly with Verilog-HDL. Rather it was a language with Similar syntax and related semantics that was intended to model analog systems and be compatible with SPICE-class circuit simulation engines. The first implementation of Verilog-A soon followed: a version from Cadence that ran on their Spectre circuit simulator. As more implementations of Verilog-A became available, the group defining the a- log and mixed-signal extensions to Verilog continued their work, releasing the defi- tion of Verilog-AMS in 2000. Verilog-AMS combines both Verilog-HDL and Verilog-A, and adds additional mixed-signal constructs, providing a hardware description language suitable for analog, digital, and mixed-signal systems. Again, Cadence was first to release an implementation of this new language, in a product named AMS Designer that combines their Verilog and Spectre simulation engines.

Download or read book Analog and Mixed signal Test written by Bapiraju Vinnakota and published by . This book was released on 1998 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: More and more chips are being designed with both analog and digital circuitry next to each other, which makes testing analog circuitry even more challenging. This comprehensive guide reviews all the potential testing options, helping designers, engineers, CAD developers, and researchers choose the most cost-effective, accurate solutions for both mixed-signal and analog-only testing.

Download or read book ASIC SoC Functional Design Verification written by Ashok B. Mehta and published by Springer. This book was released on 2017-06-28 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in detail all required technologies and methodologies needed to create a comprehensive, functional design verification strategy and environment to tackle the toughest job of guaranteeing first-pass working silicon. The author first outlines all of the verification sub-fields at a high level, with just enough depth to allow an engineer to grasp the field before delving into its detail. He then describes in detail industry standard technologies such as UVM (Universal Verification Methodology), SVA (SystemVerilog Assertions), SFC (SystemVerilog Functional Coverage), CDV (Coverage Driven Verification), Low Power Verification (Unified Power Format UPF), AMS (Analog Mixed Signal) verification, Virtual Platform TLM2.0/ESL (Electronic System Level) methodology, Static Formal Verification, Logic Equivalency Check (LEC), Hardware Acceleration, Hardware Emulation, Hardware/Software Co-verification, Power Performance Area (PPA) analysis on a virtual platform, Reuse Methodology from Algorithm/ESL to RTL, and other overall methodologies.

Download or read book Metric Driven Design Verification written by Hamilton B. Carter and published by Springer Science & Business Media. This book was released on 2007-09-05 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the book is to train verification engineers on the breadth of technologies available and to give them a utilitarian methodology for making effective use of those technologies. The book is easy to understand and a joy to read. Its organization follows a ‘typical’ verification project from inception to completion, (planning to closure). The book elucidates concepts using non-technical terms and clear entertaining explanations. Analogies to other fields are employed to keep the book light-hearted and interesting.

Download or read book Wireless Receiver Architectures and Design written by Tony J. Rouphael and published by Academic Press. This book was released on 2014-06-17 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless Receiver Architectures and Design presents the various designs and architectures of wireless receivers in the context of modern multi-mode and multi-standard devices. This one-stop reference and guide to designing low-cost low-power multi-mode, multi-standard receivers treats analog and digital signal processing simultaneously, with equal detail given to the chosen architecture and modulating waveform. It provides a complete understanding of the receiver‘s analog front end and the digital backend, and how each affects the other. The book explains the design process in great detail, starting from an analysis of requirements to the choice of architecture and finally to the design and algorithm development. The advantages and disadvantages of each wireless architecture and the suitability to a standard are given, enabling a better choice of design methodology, receiver lineup, analog block, and digital algorithm for a particular architecture. Whether you are a communications engineer working in system architecture and waveform design, an RF engineer working on noise and linearity budget and line-up analysis, a DSP engineer working on algorithm development, or an analog or digital design engineer designing circuits for wireless transceivers, this book is your one-stop reference and guide to designing low-cost low-power multi-mode multi-standard receivers. The material in this book is organized and presented to lead you from applied theory to practical design with plenty of examples and case studies drawn from modern wireless standards. Provides a complete description of receiver architectures together with their pros and cons, enabling a better choice of design methodology Covers the design trade-offs and algorithms between the analog front end and the digital modem – enabling an end-to-end design approach Addresses multi-mode multi-standard low-cost, low-power radio design – critical for producing the applications for Smart phones and portable internet devices

Download or read book The gm ID Methodology a sizing tool for low voltage analog CMOS Circuits written by Paul Jespers and published by Springer Science & Business Media. This book was released on 2009-12-01 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: IC designers appraise currently MOS transistor geometries and currents to compromise objectives like gain-bandwidth, slew-rate, dynamic range, noise, non-linear distortion, etc. Making optimal choices is a difficult task. How to minimize for instance the power consumption of an operational amplifier without too much penalty regarding area while keeping the gain-bandwidth unaffected in the same time? Moderate inversion yields high gains, but the concomitant area increase adds parasitics that restrict bandwidth. Which methodology to use in order to come across the best compromise(s)? Is synthesis a mixture of design experience combined with cut and tries or is it a constrained multivariate optimization problem, or a mixture? Optimization algorithms are attractive from a system perspective of course, but what about low-voltage low-power circuits, requiring a more physical approach? The connections amid transistor physics and circuits are intricate and their interactions not always easy to describe in terms of existing software packages. The gm/ID synthesis methodology is adapted to CMOS analog circuits for the transconductance over drain current ratio combines most of the ingredients needed in order to determine transistors sizes and DC currents.

Download or read book Analog Circuit Design written by Bob Dobkin and published by Elsevier. This book was released on 2011-09-26 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog circuit and system design today is more essential than ever before. With the growth of digital systems, wireless communications, complex industrial and automotive systems, designers are challenged to develop sophisticated analog solutions. This comprehensive source book of circuit design solutions will aid systems designers with elegant and practical design techniques that focus on common circuit design challenges. The book’s in-depth application examples provide insight into circuit design and application solutions that you can apply in today’s demanding designs. Covers the fundamentals of linear/analog circuit and system design to guide engineers with their design challenges Based on the Application Notes of Linear Technology, the foremost designer of high performance analog products, readers will gain practical insights into design techniques and practice Broad range of topics, including power management tutorials, switching regulator design, linear regulator design, data conversion, signal conditioning, and high frequency/RF design Contributors include the leading lights in analog design, Robert Dobkin, Jim Williams and Carl Nelson, among others

Download or read book TLM driven Design and Verification Methodology written by Brian Bailey and published by Lulu.com. This book was released on 2010 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a comprehensive SystemC TLM-driven IP design and verification solution'including methodology guidelines, high-level synthesis, and TLM-aware verification basedon Cadence products'that will help designers transition to a TLM-driven design andverification flow.

Download or read book Variation Aware Design of Custom Integrated Circuits A Hands on Field Guide written by Trent McConaghy and published by Springer Science & Business Media. This book was released on 2012-09-28 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book targets custom IC designers who are encountering variation issues in their designs, especially for modern process nodes at 45nm and below, such as statistical process variations, environmental variations, and layout effects. It teaches them the state-of-the-art in Variation-Aware Design tools, which help the designer to analyze quickly the variation effects, identify the problems, and fix the problems. Furthermore, this book describes the algorithms and algorithm behavior/performance/limitations, which is of use to designers considering these tools, designers using these tools, CAD researchers, and CAD managers.

Download or read book The Designer s Guide to Spice and Spectre written by Ken Kundert and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering productivity in integrated circuit product design and - velopment today is limited largely by the effectiveness of the CAD tools used. For those domains of product design that are highly dependent on transistor-level circuit design and optimization, such as high-speed logic and memory, mixed-signal analog-digital int- faces, RF functions, power integrated circuits, and so forth, circuit simulation is perhaps the single most important tool. As the complexity and performance of integrated electronic systems has increased with scaling of technology feature size, the capabilities and sophistication of the underlying circuit simulation tools have correspondingly increased. The absolute size of circuits requiring transistor-level simulation has increased dramatically, creating not only problems of computing power resources but also problems of task organization, complexity management, output representation, initial condition setup, and so forth. Also, as circuits of more c- plexity and mixed types of functionality are attacked with simu- tion, the spread between time constants or event time scales within the circuit has tended to become wider, requiring new strategies in simulators to deal with large time constant spreads.

Download or read book Low Power Methodology Manual written by David Flynn and published by Springer Science & Business Media. This book was released on 2007-07-31 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a practical guide for engineers doing low power System-on-Chip (SoC) designs. It covers various aspects of low power design from architectural issues and design techniques to circuit design of power gating switches. In addition to providing a theoretical basis for these techniques, the book addresses the practical issues of implementing them in today's designs with today's tools.

Download or read book Fundamentals of Layout Design for Electronic Circuits written by Jens Lienig and published by Springer Nature. This book was released on 2020-03-19 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamental knowledge of layout design from the ground up, addressing both physical design, as generally applied to digital circuits, and analog layout. Such knowledge provides the critical awareness and insights a layout designer must possess to convert a structural description produced during circuit design into the physical layout used for IC/PCB fabrication. The book introduces the technological know-how to transform silicon into functional devices, to understand the technology for which a layout is targeted (Chap. 2). Using this core technology knowledge as the foundation, subsequent chapters delve deeper into specific constraints and aspects of physical design, such as interfaces, design rules and libraries (Chap. 3), design flows and models (Chap. 4), design steps (Chap. 5), analog design specifics (Chap. 6), and finally reliability measures (Chap. 7). Besides serving as a textbook for engineering students, this book is a foundational reference for today’s circuit designers. For Slides and Other Information: https://www.ifte.de/books/pd/index.html

Download or read book Computer Methods for Circuit Analysis and Design written by Jiri Vlach and published by Springer Science & Business Media. This book was released on 1994 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is about methods used for the computer simulation of analog systems. It concentrates on electronic applications, but many of the methods are applicable to other engineering problems as well. This revised edition (1st, 1983) encompasses recent theoretical developments and program-writing tips for computer-aided design. About 60% of the text is suitable for a senior-level course in circuit theory. The whole text is suitable for graduate courses or as a reference for scientists and engineers who seek information in the field. Annotation copyright by Book News, Inc., Portland, OR

Download or read book Model Engineering in Mixed Signal Circuit Design written by Sorin Alexander Huss and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the first time, this up-to-date text combines the main issues of the hardware description language VHDL-AMS aimed at model representation of mixed-signal circuits and systems, characterization methods and tools for the extraction of model parameters, and modelling methodologies for accurate high-level behavioural models.

Download or read book VLSI Circuit Design Methodology Demystified written by Liming Xiu and published by John Wiley & Sons. This book was released on 2007-12-04 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was written to arm engineers qualified and knowledgeable in the area of VLSI circuits with the essential knowledge they need to get into this exciting field and to help those already in it achieve a higher level of proficiency. Few people truly understand how a large chip is developed, but an understanding of the whole process is necessary to appreciate the importance of each part of it and to understand the process from concept to silicon. It will teach readers how to become better engineers through a practical approach of diagnosing and attacking real-world problems.