Download or read book Milk Run Design Definitions Concepts and Solution Approaches written by Meyer, Anne and published by KIT Scientific Publishing. This book was released on 2017-05-10 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient inbound networks in the European automotive industry rely on a set of different transport concepts including milk runs - understood as regularly scheduled pickup tours. The complexity of designing such a mixed network makes decision support necessary: In this book we provide definitions, mathematical models and a solution method for the Milk Run Design problem and introduce indicators assessing the performance of established milk runs in relation to alternative transport concepts.
Download or read book Milk Run Design written by Anne Meyer and published by . This book was released on 2020-10-09 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient inbound networks in the European automotive industry rely on a set of different transport concepts including milk runs - understood as regularly scheduled pickup tours. The complexity of designing such a mixed network makes decision support necessary: In this book we provide definitions, mathematical models and a solution method for the Milk Run Design problem and introduce indicators assessing the performance of established milk runs in relation to alternative transport concepts. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.
Download or read book Design for Stability in Transport Logistics Definition Concepts and Evaluation written by Kunert, Christoph and published by KIT Scientific Publishing. This book was released on 2018-08-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lean management describes a set of methods combined with a management philosophy which aims at eliminating waste in logistics processes. In production logistics, lean is already widespread and applied successfully. Research has shown that lean also works in a warehousing environment. In transport logistics, lean is still at a low level of maturity in both research and practice. This work contributes to closing this gap by introducing Heijunka leveling to transport logistics.
Download or read book Information Systems Architecture and Technology Proceedings of 39th International Conference on Information Systems Architecture and Technology ISAT 2018 written by Jerzy Świątek and published by Springer. This book was released on 2018-08-27 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume set of books highlights major advances in the development of concepts and techniques in the area of new technologies and architectures of contemporary information systems. Further, it helps readers solve specific research and analytical problems and glean useful knowledge and business value from the data. Each chapter provides an analysis of a specific technical problem, followed by a numerical analysis, simulation and implementation of the solution to the real-life problem. Managing an organisation, especially in today’s rapidly changing circumstances, is a very complex process. Increased competition in the marketplace, especially as a result of the massive and successful entry of foreign businesses into domestic markets, changes in consumer behaviour, and broader access to new technologies and information, calls for organisational restructuring and the introduction and modification of management methods using the latest advances in science. This situation has prompted many decision-making bodies to introduce computer modelling of organisation management systems. The three books present the peer-reviewed proceedings of the 39th International Conference “Information Systems Architecture and Technology” (ISAT), held on September 16–18, 2018 in Nysa, Poland. The conference was organised by the Computer Science and Management Systems Departments, Faculty of Computer Science and Management, Wroclaw University of Technology and Sciences and University of Applied Sciences in Nysa, Poland. The papers have been grouped into three major parts: Part I—discusses topics including but not limited to Artificial Intelligence Methods, Knowledge Discovery and Data Mining, Big Data, Knowledge Based Management, Internet of Things, Cloud Computing and High Performance Computing, Distributed Computer Systems, Content Delivery Networks, and Service Oriented Computing. Part II—addresses topics including but not limited to System Modelling for Control, Recognition and Decision Support, Mathematical Modelling in Computer System Design, Service Oriented Systems and Cloud Computing, and Complex Process Modelling. Part III—focuses on topics including but not limited to Knowledge Based Management, Modelling of Financial and Investment Decisions, Modelling of Managerial Decisions, Production Systems Management and Maintenance, Risk Management, Small Business Management, and Theories and Models of Innovation.
Download or read book Intelligent Systems in Production Engineering and Maintenance written by Anna Burduk and published by Springer. This book was released on 2018-07-31 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a collection of 103 peer-reviewed articles from the Second International Conference on Intelligent Systems in Production Engineering and Maintenance (ISPEM 2018). The conference was organized by the Faculty of Mechanical Engineering and CAMT (Centre for Advanced Manufacturing Technologies), Wrocław University of Science and Technology and was held in Wrocław (Poland) on 17–18 September 2018. The conferences topics included the possibility of using a wide range of intelligent methods in production engineering, presenting and discussing new solutions for innovative plants, research findings and case studies demonstrating advances in production and maintenance from the point of view of Industry 4.0 – particularly applications of intelligent systems, methods and tools in production engineering, maintenance, logistics, quality management, information systems and product development. The book is divided into two parts: the first includes papers related to intelligent systems in production engineering, while the second is dedicated to special sessions focusing on: 1. Computer Aided methods in Production Engineering 2. Mining 4.0 and Intelligent Mining Transportation 3. Modelling and Simulation of Production Processes 4. Multi-Faceted Modelling of Networks and Processes 5. Product Design and Product Manufacturing in Industry 4.0 This book is an excellent source of information for scientists in the field of manufacturing engineering and for top managers in production enterprises.
Download or read book Theories and Practices for Sustainable Urban Logistics written by Polat, Olcay and published by IGI Global. This book was released on 2024-04-29 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cities are grappling with unprecedented challenges, and the urgency to transform urban logistics into sustainable, equitable, and economically viable systems has never been more pressing. The ripple effects of urbanization on logistics demand careful examination, necessitating a comprehensive resource that sheds light on the dynamic complexities but identifies actionable strategies for a sustainable future. Theories and Practices for Sustainable Urban Logistics is a beacon for academic scholars seeking to untangle the intricate threads of urban logistics in the present tense. With a laser focus on theory, policy, and real-world applications, this publication aims to be the solution for understanding and addressing the evolving demands of urban logistics. By delving into historical evolution, exploring case studies, and offering practical insights, the book equips readers with the knowledge needed to navigate the challenges and seize the opportunities of sustainable urban logistics.
Download or read book Computational Collective Intelligence written by Ngoc Thanh Nguyen and published by Springer Nature. This book was released on 2021-09-29 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 13th International Conference on Computational Collective Intelligence, ICCCI 2021, held in September/October 2021. The conference was held virtually due to the COVID-19 pandemic. The 58 full papers were carefully reviewed and selected from 230 submissions. The papers are grouped in topical issues on knowledge engineering and semantic web; social networks and recommender systems; collective decision-making; cooperative strategies for decision making and optimization; data mining and machine learning; computer vision techniques; natural language processing; Internet of Things: technologies and applications; Internet of Things and computational technologies for collective intelligence; computational intelligence for multimedia understanding.
Download or read book Computational Science ICCS 2020 written by Valeria V. Krzhizhanovskaya and published by Springer Nature. This book was released on 2020-06-18 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seven-volume set LNCS 12137, 12138, 12139, 12140, 12141, 12142, and 12143 constitutes the proceedings of the 20th International Conference on Computational Science, ICCS 2020, held in Amsterdam, The Netherlands, in June 2020.* The total of 101 papers and 248 workshop papers presented in this book set were carefully reviewed and selected from 719 submissions (230 submissions to the main track and 489 submissions to the workshops). The papers were organized in topical sections named: Part I: ICCS Main Track Part II: ICCS Main Track Part III: Advances in High-Performance Computational Earth Sciences: Applications and Frameworks; Agent-Based Simulations, Adaptive Algorithms and Solvers; Applications of Computational Methods in Artificial Intelligence and Machine Learning; Biomedical and Bioinformatics Challenges for Computer Science Part IV: Classifier Learning from Difficult Data; Complex Social Systems through the Lens of Computational Science; Computational Health; Computational Methods for Emerging Problems in (Dis-)Information Analysis Part V: Computational Optimization, Modelling and Simulation; Computational Science in IoT and Smart Systems; Computer Graphics, Image Processing and Artificial Intelligence Part VI: Data Driven Computational Sciences; Machine Learning and Data Assimilation for Dynamical Systems; Meshfree Methods in Computational Sciences; Multiscale Modelling and Simulation; Quantum Computing Workshop Part VII: Simulations of Flow and Transport: Modeling, Algorithms and Computation; Smart Systems: Bringing Together Computer Vision, Sensor Networks and Machine Learning; Software Engineering for Computational Science; Solving Problems with Uncertainties; Teaching Computational Science; UNcErtainty QUantIficatiOn for ComputationAl modeLs *The conference was canceled due to the COVID-19 pandemic.
Download or read book FlexSim in Academe Teaching and Research written by Pawel Pawlewski and published by Springer. This book was released on 2019-01-29 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a variety of teaching and academic research applications that effectively utilize FlexSim to: (1) provide guidelines, methods and tools for simulation modeling and analysis in a variety of educational settings and (2) address a variety of important design and operational issues in industry. Simulation is increasingly proving to be an important tool for supporting decision-making and problem-solving processes in many disparate domains, including the design, management and improvement of a wide range of operations systems in manufacturing, logistics, healthcare, etc. Achieving resource efficiency and minimizing negative externalities from operations represent two of today’s greatest challenges; modern simulation methods can help to overcome them. FlexSim is a prominent software package for developing discrete-event, agent-based, continuous, and hybrid simulations.
Download or read book Vehicle and Automotive Engineering 2 written by Károly Jármai and published by Springer. This book was released on 2018-05-09 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the second Vehicle Engineering and Vehicle Industry conference, reflecting the outcomes of theoretical and practical studies and outlining future development trends in a broad field of automotive research. The conference’s main themes included design, manufacturing, economic and educational topics.
Download or read book Computational Logistics written by Eduardo Lalla-Ruiz and published by Springer Nature. This book was released on 2020-09-26 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 11th International Conference on Computational Logistics, ICCL 2020, held in Enschede, The Netherlands, in September 2020. The 49 papers included in this book were carefully reviewed and selected from 73 submissions. They were organized in topical sections named: maritime and port logistics; vehicle routing and scheduling; freight distribution and city logistics; network design and scheduling; and selected topics in logistics. Due to the Corona pandemic ICCL 2020 was held as a virtual event.
Download or read book Performance Evaluation Models for Distributed Service Networks written by Grzegorz Bocewicz and published by Springer Nature. This book was released on 2021-04-16 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents novel approaches to formulate, analyze, and solve problems in the area of distributed service networks, notably based on AI-related methods (parallel/cloud computing, declarative modeling, fuzzy methods). Distributed service networks are an important area of research and applications. The methods presented are meant to integrate both emerging and existing concepts and approaches for different types of production flows through synchronizations. An integration of logistics services (e.g., supply chains and projects portfolios), public and multimodal transport, traffic flow congestion management in ad hoc networks, design of high-performance cloud data centers, and milk-run distribution networks are shown as illustrations for the methods proposed. The book is of interest to researchers and practitioners in computer science, operations management, production control, and related fields.
Download or read book Advances in Manufacturing Production Management and Process Control written by Waldemar Karwowski and published by Springer. This book was released on 2018-06-26 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in manufacturing and process control, with a special emphasis on digital manufacturing and intelligent technologies for manufacturing and industrial processes control. The human aspect of the developed technologies and products, their interaction with the users, as well as sustainability issues, are covered in detail. Development of new products using 3D printers, rapid prototyping systems, remote fabrication, and other advanced techniques, is described in detail, highlighting the state-of-the-art and current challenges. Other key topics include digital modeling systems and additive manufacturing, together with their applications in a number of fields, e.g in bioengineering/biomedicine, in the aerospace, maritime and military fields or for archeological and historical purposes, such as preserving structures, but not limited to this. The book is based on three AHFE 2018 affiliated conferences i.e. the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE 2018 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE 2018 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, which were held on July 21-25, 2018, in Orlando, Florida, USA.
Download or read book Logistics Transportation Systems written by MD Sarder and published by Elsevier. This book was released on 2020-10-17 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Logistics Transportation Systems compiles multiple topics on transportation logistics systems from both qualitative and quantitative perspectives, providing detailed examples of real-world logistics workflows. It explores the key concepts and problem-solving techniques required by researchers and logistics professionals to effectively manage the continued expansion of logistics transportation systems, which is expected to reach an estimated 25 billion tons in the United States alone by 2045. This book provides an ample understanding of logistics transportation systems, including basic concepts, in-depth modeling analysis, and network analysis for researchers and practitioners. In addition, it covers policy issues related to transportation logistics, such as security, rules and regulations, and emerging issues including reshoring. This book is an ideal guide for academic researchers and both undergraduate and graduate students in transportation modeling, supply chains, planning, and systems. It is also useful to transportation practitioners involved in planning, feasibility studies, consultation and policy for transportation systems, logistics, and infrastructure. - Provides real-world examples of logistics systems solutions for multiple transportation modes, including seaports, rail, barge, road, pipelines, and airports - Covers a wide range of business aspects, including customer service, cost, and decision analysis - Features key-term definitions, concept overviews, discussions, and analytical problem-solving
Download or read book Logistics Management and Strategy written by Alan Harrison and published by Pearson UK. This book was released on 2019 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulletin of the Atomic Scientists written by and published by . This book was released on 1959-02 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Bulletin of the Atomic Scientists is the premier public resource on scientific and technological developments that impact global security. Founded by Manhattan Project Scientists, the Bulletin's iconic "Doomsday Clock" stimulates solutions for a safer world.
Download or read book Lean Logistics written by Michel Baudin and published by CRC Press. This book was released on 2005-02-11 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Are your warehouses full while production is stopped by shortages? Do your customers complain that your lead times are too long and deliveries too late? Lean Logistics: The Nuts and Bolts of Delivering Materials and Goods by Michel Baudin helps you determine whether you have the right supply to meet your customers’ demands, as well as the ability to organize and deliver that supply. In this cutting edge work, Baudin addresses the physical infrastructure of lean logistics and the flow of information that composes its nervous system. He demonstrates the methods that will allow you to avoid shortages while maintaining low inventories, while showing you how to take advantage of the increased capacity and flexibility generated through lean manufacturing. This book picks up where the Baudin’s previous book, Lean Assembly, left off.
