Download or read book Microwave Solid State Circuits and Applications Solutions Management written by Chang and published by Wiley-Interscience. This book was released on 1994-03-15 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microwave Solid State Circuits and Applications written by Kai Chang and published by Wiley-Interscience. This book was released on 2012-08-28 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive reference text focuses on the basic operating principles and the techniques used to incorporate solid-state devices into circuit applications. Fundamental design equations are derived and practical examples are given whenever possible. This second edition has been updated with the addition of the latest materials of new developments and various transistor (MESFET, HBT, and HEMT) circuits and applications. Existing chapters have been expanded to include such topics as microstrip resonators, couplers, and filters; and transmitter and oscillator system parameters. Another chapter will be updated with information on testing methods and equipment, including probing and fixturing methods, a review of testing and calibration methods, and a review of automated test equipment. Interactive software will also be included, and there is a 50% increase in problems and examples. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department

Download or read book Microwave Solid State Circuit Design written by Inder Bahl and published by Wiley-Interscience. This book was released on 2003-04-18 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides detailed coverage of passive and active RF and microwave circuit design. Discusses the practical aspects of microwave circuits including fabrication technologies. Includes a treatment of heterostructure and wide-band gap devices. Examines compact and low cost circuit design methodologies.

Download or read book Microwave Solid State Devices and Applications written by D. V. Morgan and published by Institution of Electrical Engineers. This book was released on 1980 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microwave Solid State Circuit Design written by Inder J Bahl and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control Components Using Si GaAs and GaN Technologies written by Inder J. Bahl and published by Artech House. This book was released on 2014-09-01 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control circuits are important parts of RF and microwave systems. Their compact size, high performance, and low cost have played a vital role in the development of cost effective solutions and new applications during the past quarter century. This book provides a comprehensive treatment of such circuits, including device operation and their models, basic circuit theory and designs, and applications. The unique features of this book include in-depth and comprehensive study of control circuits, extensive design equations and figures, treatment of practical aspect of circuits and description of fabrication technologies. It provides you with a broad view of solid state control circuits including various technologies and their comparison and up to date information.

Download or read book RF Microwave Engineering and Applications in Energy Systems written by Abdullah Eroglu and published by John Wiley & Sons. This book was released on 2022-05-02 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF/MICROWAVE ENGINEERING AND APPLICATIONS IN ENERGY SYSTEMS An essential text with a unique focus on RF and microwave engineering theory and its applications In RF/Microwave Engineering and Applications in Energy Systems, accomplished researcher Abdullah Eroglu delivers a detailed treatment of key theoretical aspects of radio-frequency and microwave engineering concepts along with parallel presentations of their practical applications. The text includes coverage of recent advances in the subject, including energy harvesting methods, RFID antenna designs, HVAC system controls, and smart grids. The distinguished author provides step-by-step solutions to common engineering problems by way of numerous examples and offers end-of-chapter problems and solutions on each topic. These practical applications of theoretical subjects aid the reader with retention and recall and demonstrate a solid connection between theory and practice. The author also applies common simulation tools in several chapters, illustrating the use and implementation of time domain circuit simulators in conjunction with electromagnetic simulators, as well as Matlab for design, simulation, and implementation at the component and system levels. Readers will also benefit from: A thorough introduction to the foundations of electromagnetics, including line, surface, and volume integrals, vector operation and theorems, and Maxwell’s equations Comprehensive explorations of passive and active components in RF and microwave engineering, including resistors, capacitors, inductors, and semiconductor materials and active devices Practical discussions of transmission lines, including transmission line analysis, Smith charts, microstrip lines, and striplines In-depth examinations of network parameters, including impedance parameters, ABCD parameters, h-Hybrid parameters, and network connections Perfect for senior-level undergraduates and graduate students studying RF or Microwave engineering, RF/Microwave Engineering and Applications in Energy Systems is also an indispensable resource for professionals whose work touches on radio-frequency and microwave technologies.

Download or read book Fundamentals of Solid state Electronics written by Chih-Tang Sah and published by World Scientific. This book was released on 1996 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Solution Manual, a companion volume of the book, Fundamentals of Solid-State Electronics, provides the solutions to selected problems listed in the book. Most of the solutions are for the selected problems that had been assigned to the engineering undergraduate students who were taking an introductory device core course using this book.This Solution Manual also contains an extensive appendix which illustrates the application of the fundamentals to solutions of state-of-the-art transistor reliability problems which have been taught to advanced undergraduate and graduate students.

Download or read book Foundations for Microwave Engineering written by Robert E. Collin and published by . This book was released on 1992 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique in the breadth and rigor with which it covers the fundamentals and theory of microwave engineering. The new edition of Collin accommodates the most significant technological development in solid state devices since it was first published in 1966. Changes include material on planar transmission, optical fibers, and dialect waveguides and resonators. The most notable change is the replacement of the now obsolete material on microwave masers in 10 with the treatment of solid state devices, scattering matrix methods of amplifier design, and solid state oscillator circuits and mixers. A Solutions Manual with problem solving software is new to this edition.

Download or read book Analysis and Design of Autonomous Microwave Circuits written by Almudena Suarez and published by John Wiley & Sons. This book was released on 2009-02-17 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents simulation techniques that substantially increase designers' control over the oscillationin autonomous circuits This book facilitates a sound understanding of the free-running oscillation mechanism, the start-up from the noise level, and the establishment of the steady-state oscillation. It deals with the operation principles and main characteristics of free-running and injection-locked oscillators, coupled oscillators, and parametric frequency dividers. Analysis and Design of Autonomous Microwave Circuits provides: An exploration of the main nonlinear-analysis methods, with emphasis on harmonic balance and envelope transient methods Techniques for the efficient simulation of the most common autonomous regimes A presentation and comparison of the main stability-analysis methods in the frequency domain A detailed examination of the instabilization mechanisms that delimit the operation bands of autonomous circuits Coverage of techniques used to eliminate common types of undesired behavior, such as spurious oscillations, hysteresis, and chaos A thorough presentation of the oscillator phase noise A comparison of the main methodologies of phase-noise analysis Techniques for autonomous circuit optimization, based on harmonic balance A consideration of different design objectives: presetting the oscillation frequency and output power, increasing efficiency, modifying the transient duration, and imposing operation bands Analysis and Design of Autonomous Microwave Circuits is a valuable resource for microwave designers, oscillator designers, and graduate students in RF microwave design.

Download or read book Microwave Circuit Design Using Linear and Nonlinear Techniques written by George D. Vendelin and published by John Wiley & Sons. This book was released on 2005-10-03 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate handbook on microwave circuit design with CAD. Full of tips and insights from seasoned industry veterans, Microwave Circuit Design offers practical, proven advice on improving the design quality of microwave passive and active circuits-while cutting costs and time. Covering all levels of microwave circuit design from the elementary to the very advanced, the book systematically presents computer-aided methods for linear and nonlinear designs used in the design and manufacture of microwave amplifiers, oscillators, and mixers. Using the newest CAD tools, the book shows how to design transistor and diode circuits, and also details CAD's usefulness in microwave integrated circuit (MIC) and monolithic microwave integrated circuit (MMIC) technology. Applications of nonlinear SPICE programs, now available for microwave CAD, are described. State-of-the-art coverage includes microwave transistors (HEMTs, MODFETs, MESFETs, HBTs, and more), high-power amplifier design, oscillator design including feedback topologies, phase noise and examples, and more. The techniques presented are illustrated with several MMIC designs, including a wideband amplifier, a low-noise amplifier, and an MMIC mixer. This unique, one-stop handbook also features a major case study of an actual anticollision radar transceiver, which is compared in detail against CAD predictions; examples of actual circuit designs with photographs of completed circuits; and tables of design formulae.

Download or read book Microwave Active Devices and Circuits for Communication written by Subhash Chandra Bera and published by Springer. This book was released on 2018-12-11 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses active devices and circuits for microwave communications. It begins with the basics of device physics and then explores the design of microwave communication systems including analysis and the implementation of different circuits. In addition to classic topics in microwave active devices, such as p-i-n diodes, Schottky diodes, step recovery diodes, BJT, HBT, MESFET, HFET, and various microwave circuits like switch, phase shifter, attenuator, detector, amplifier, multiplier and mixer, the book also covers modern areas such as Class-F power amplifiers, direct frequency modulators, linearizers, and equalizers. Most of the examples are based on practical devices available in commercial markets and the circuits presented are operational. The book uses analytical methods to derive values of circuit components without the need for any circuit design tools, in order to explain the theory of the circuits. All the given analytical expressions are also cross verified using commercially available microwave circuit design tools, and each chapter includes relevant diagrams and solved problems. It is intended for scholars in the field of electronics and communication engineering.

Download or read book Microwave Discrete Solid state Devices and Interface Considerations written by Chris J. Georgopoulos and published by Don White Consultants Incorporated. This book was released on 1990 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The TECH EDGE Series is a new generation of handbooks designed for the general electronic community covering a variety of topics & applications. Each book is narrow in scope, yet packed to provide the latest in technological developments &/or solutions to today's engineering problems. Approximately 125 pages of text, illustrations, tables & figures. TECH EDGE books can be bought either individually, as a series, or at group discounts. The first installment of the TECH EDGE Series is a six-book set on RF & Microwaves. Presenting theory while stressing practical aspects & design examples, each book treats pertinent interface problems that most other publications are not concerned with. Nearly 700 pages of text, graphs, figures & tables make up this complete series. Semiconductor devices play an important role in RF & Microwave circuits & systems where they perform several basic functions. This book discusses RF & Microwave bipolar transistors, GaAs FETS, Schottky & Tunnel diodes, Gunn & transit time diodes, & varactors & PIN diodes.

Download or read book Stability Analysis of Nonlinear Microwave Circuits written by Almudena Suárez and published by Artech House. This book was released on 2003 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation "Stability Analysis of Nonlinear Microwave Circuits is essential reading for microwave designers working with circuits based on solid state devices, diodes, and transistors, engineers designing radio-frequency circuits, and professionals regularly involved in any area requiring a functional knowledge of nonlinear oscillations and stability concepts. It provides an in-depth look at the very complex and often unforeseen behavior of nonlinear circuits. The book includes detailed coverage of power amplifiers, voltage-controlled oscillators, frequency dividers, frequency multipliers, self-oscillating mixers, and phased-locked loops."--BOOK JACKET.Title Summary field provided by Blackwell North America, Inc. All Rights Reserved

Download or read book Microwave Solid state Devices written by Samuel Y. Liao and published by . This book was released on 1985 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Microwave Solid state Circuits written by Peter J. Khan and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microwave Devices Circuits and Subsystems for Communications Engineering written by Ian A. Glover and published by John Wiley & Sons. This book was released on 2006-05-01 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave Devices, Circuits and Subsystems for Communications Engineering provides a detailed treatment of the common microwave elements found in modern microwave communications systems. The treatment is thorough without being unnecessarily mathematical. The emphasis is on acquiring a conceptual understanding of the techniques and technologies discussed and the practical design criteria required to apply these in real engineering situations. Key topics addressed include: Microwave diode and transistor equivalent circuits Microwave transmission line technologies and microstrip design Network methods and s-parameter measurements Smith chart and related design techniques Broadband and low-noise amplifier design Mixer theory and design Microwave filter design Oscillators, synthesisers and phase locked loops Each chapter is written by specialists in their field and the whole is edited by experience authors whose expertise spans the fields of communications systems engineering and microwave circuit design. Microwave Devices, Circuits and Subsystems for Communications Engineering is suitable for senior electrical, electronic or telecommunications engineering undergraduate students, first year postgraduate students and experienced engineers seeking a conversion or refresher text. Includes a companion website featuring: Solutions to selected problems Electronic versions of the figures Sample chapter