Download or read book Microwave Systems and Applications written by Sotirios Goudos and published by BoD – Books on Demand. This book was released on 2017-01-11 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave systems are key components of every modern wireless communication system. The main objective of this book was to collect as many different state-of-the-art studies as possible in order to cover in a single volume the main aspects of microwave systems and applications. This book contains 17 chapters written by acknowledged experts, researchers, academics, and microwave engineers, providing comprehensive information and covering a wide range of topics on all aspects of microwave systems and applications. This book is divided into four parts. The first part is devoted to microwave components. The second part deals with microwave ICs and innovative techniques for on-chip antenna design. The third part presents antenna design cases for microwave systems. Finally, the last part covers different applications of microwave systems.

Download or read book RF Microwave and Millimeter Wave Technologies written by Hemant Kumar and published by Springer Nature. This book was released on with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of RF and Microwave Techniques and Technologies written by Hans L. Hartnagel and published by Springer Nature. This book was released on 2023-07-28 with total page 1554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase of consumer, medical and sensors electronics using radio frequency (RF) and microwave (MW) circuits has implications on overall performances if design is not robust and optimized for a given applications. The current and later generation communication systems and Internet of Thing (IoT) demand for robust electronic circuits with optimized performance and functionality, but low cost, size, and power consumption. As a result, there is a need for a textbook that provides a comprehensive treatment of the subject. This book provides state-of-the-art coverage of RF and Microwave Techniques and Technologies, covers important topics: transmission-line theory, passive and semiconductor devices, active and passive microwave circuits and receiver systems, as well as antennas, noise and digital signal modulation schemes. With an emphasis on theory, design, and applications, this book is targeted to students, teachers, scientists, and practicing design engineers who are interested in broadening their knowledge of RF and microwave electronic circuit design. Readers will also benefit from a unique integration of theory and practice, provides the readers a solid understanding of the RF and microwave concepts, active and passive components, antenna, and modulation schemes. Readers will learn to solve common design problems ranging from selection of components, matching networks to biasing and stability, and digital modulation techniques. More importantly, it provides basic understanding in the analysis and design of RF and microwave circuits in a manner that is practiced in industry. This make sure that the know-how learned in this book can be effortlessly and straightway put into practice without any obstacles.

Download or read book Electromagnetics of Body Area Networks written by Douglas H. Werner and published by John Wiley & Sons. This book was released on 2016-07-11 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a comprehensive treatment of the field, covering fundamental theoretical principles and new technological advancements, state-of-the-art device design, and reviewing examples encompassing a wide range of related sub-areas. In particular, the first area focuses on the recent development of novel wearable and implantable antenna concepts and designs including metamaterial-based wearable antennas, microwave circuit integrated wearable filtering antennas, and textile and/or fabric material enabled wearable antennas. The second set of topics covers advanced wireless propagation and the associated statistical models for on-body, in-body, and off-body modes. Other sub-areas such as efficient numerical human body modeling techniques, artificial phantom synthesis and fabrication, as well as low-power RF integrated circuits and related sensor technology are also discussed. These topics have been carefully selected for their transformational impact on the next generation of body-area network systems and beyond.

Download or read book Slow wave Microwave and mm wave Passive Circuits written by Philippe Ferrari and published by John Wiley & Sons. This book was released on 2024-10-11 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive resource presenting the fundamentals and state of the art concepts, design examples, relevant components, and technology Slow-wave Microwave and mm-wave Passive Circuits presents the fundamentals and state of the art concepts, design examples, relevant components, and technology of the subject, plus examples of circuit layout optimization using slow-wave circuits. Recent advances in aspects of the slow-wave concept are covered, with potential applications including automotive radars, medical and security applications, and 5G and future 6G for very high-speed communications. The text considers a variety of slow-wave structures and associated concepts which are useful for circuit design, each structure electrically modeled with clear illustration. The highly qualified authors show that the use of the slow-wave concept can, in some cases, improve the performance of passive circuits. The techniques proposed make it possible to reduce the size and/or the performance of the circuits, with a beneficial cost-saving effect on semiconductor materials. Concepts are applied to several technologies, namely CMOS, PCB (Printed Circuit Board) and nanowires. Sample topics covered include: Concepts of energy storage with examples of slow-wave CPW (S-CPW), slow-wave SIW (SW-SIW), and slow-wave microstrip (S-MS), Transmission line topology and application in integrated technologies (CMOS), including possibilities offered by the BEOL (Back-End-Of-Line), Effect of the geometrical dimensions on the transmission line parameters (Zc, α, εreff, and Q) and comparisons between conventional CPW and CPS, and slow-wave CPW and CPS, Performance of slow-wave coupled lines and comparison with conventional microstrip coupled lines. Slow-wave Microwave and mm-wave Passive Circuits is a highly useful resource for graduate students (best complemented with a basic book on microwaves), engineers, and researchers. The text is also valuable for physicists wishing to implement comparable techniques in optics or mechanics.

Download or read book PLL Modulation and Mixed Signal Calibration Techniques for FMCW Radar written by Pratap Tumkur Renukaswamy and published by Springer Nature. This book was released on with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microwave RF Components for 5G Front End Systems written by Naser Ojaroudi Parchin and published by AVID SCIENCE. This book was released on 2019-12-16 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the development of mobile 4G communication system, people’s requirements for the speed of wireless communication are rapidly increasing. In order to meet this need, the research and development of the fifth generation (5G) wireless systems has been carried out. Compared with previous generation (1G~4G), 5G will have significant improvements in transmission rate, latency, mobility and so on. The book “Microwave/RF Components for 5G Front-End Systems” is outlines the simulation, design, and fabrication of microwave components including Antennas, Filters, and Power Amplifiers for 5G wireless communications. In addition, exhaustive reviews have been presented, classifying the various types and applications of reconfigurable antennas, Filters and amplifiers for current and future wireless networks.

Download or read book Reconfigurable Circuits and Technologies for Smart Millimeter Wave Systems written by Philippe Ferrari and published by . This book was released on 2022-05-25 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the theory, modeling, and design of tunable mm-wave circuits and systems using CMOS, RF MEMS, and microwave liquid crystals.

Download or read book Proceedings of the International Conference on Intelligent Vision and Computing ICIVC 2021 written by Harish Sharma and published by Springer Nature. This book was released on 2022-03-23 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding research papers presented at the International Conference on Intelligent Vision and Computing (ICIVC 2021), held online during October 03–04, 2021. ICIVC 2021 is organised by Sur University, Oman. The book presents novel contributions in intelligent vision and computing and serves as reference material for beginners and advanced research. The topics covered are intelligent systems, intelligent data analytics and computing, intelligent vision and applications collective intelligence, soft computing, optimization, cloud computing, machine learning, intelligent software, robotics, data science, data security, big data analytics, and signal natural language processing.

Download or read book New Materials and Devices Enabling 5G Applications and Beyond written by Nadine Collaert and published by Elsevier. This book was released on 2024-01-24 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Materials and Devices for 5G Applications and Beyond focuses on the materials, device architectures and enabling integration schemes for 5G applications and emerging technologies. It gives a comprehensive overview of the trade-offs, challenges and unique properties of novel upcoming technologies. Starting from the application side and its requirements, the book examines different technologies under consideration for the different functions, both more conventional to exploratory, and within this context the book provides guidance to the reader on how to possibly optimize the system for a particular application. This book aims at guiding the reader through the technologies required to enable 5G applications, with the main focus on mm-wave frequencies, up to THz. New Materials and Devises for 5G Applications and Beyond is suitable for industrial researchers and development engineers, and researchers in materials science, device engineering and circuit design. - Reviews challenges and emerging opportunities for materials, devices, and integration to enable 5G technologies - Includes discussion of technologies such as RF-MEMs, RF FINFETs, and transistors based on current and emerging materials (InP, GaN, etc.) - Focuses on mm-wave frequencies up to the terahertz regime

Download or read book Microwave Electronics written by Giovanni Ghione and published by Cambridge University Press. This book was released on 2017-11-09 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on over twenty years of teaching experience, this comprehensive yet self-contained text provides an in-depth introduction to the field of integrated microwave electronics. Ideal for a first course on the subject, it covers essential topics such as passive components and transistors, linear, low-noise and power amplifiers, and microwave measurements. An entire chapter is devoted to CAD techniques for analysis and design, covering examples of easy-to-medium difficulty for both linear and non-linear subsystems, and supported online by ADS and AWR project files. More advanced topics are also covered, providing an up-to-date overview of compound semiconductor technologies and treatment of electromagnetic issues and models. Readers can test their knowledge with end-of-chapter questions and numerical problems, and solutions and lecture slides are available online for instructors. This is essential reading for graduate and senior undergraduate students taking courses in microwave, radio-frequency and high-frequency electronics, as well as professional microwave engineers.

Download or read book Handbook of Radio and Optical Networks Convergence written by Tetsuya Kawanishi and published by Springer Nature. This book was released on 2024-11-04 with total page 1711 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides comprehensive knowledge on device and system technologies for seamlessly integrated networks of various types of transmission media such as optical fibers and millimeter and THz waves to offer super high-speed data link service everywhere. The seamless integration of the knowledge of radio and optical technologies is needed to construct wired and wireless seamless networks. High-frequency bands such as millimeter-wave and THz-wave bands where super wideband spectra are available can offer high-speed data transmission and high-resolution sensing. However, the expected coverage is limited due to large wave propagation loss. Thus, convergence of radio and optical links is indispensable to construct worldwide networks. The radio and optical technologies share the same physics and are closely related to each other but have been developed independently. Therefore, there is a big gap between these two fields. Bridging the two fields, this handbook is also intended as a common platform to design integrated networks consisting of wireless and wired links. Full coverage of wireless and wired convergence fields ranging from basics of device and transmission media to applications allows the reader to efficiently access all the important references in this single handbook. Further, it also showcases state-of-the-art technology and cases of its use.

Download or read book Intelligent Circuits and Systems written by Rajesh Singh and published by CRC Press. This book was released on 2021-08-01 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICICS-2020 is the third conference initiated by the School of Electronics and Electrical Engineering at Lovely Professional University that explored recent innovations of researchers working for the development of smart and green technologies in the fields of Energy, Electronics, Communications, Computers, and Control. ICICS provides innovators to identify new opportunities for the social and economic benefits of society. This conference bridges the gap between academics and R&D institutions, social visionaries, and experts from all strata of society to present their ongoing research activities and foster research relations between them. It provides opportunities for the exchange of new ideas, applications, and experiences in the field of smart technologies and finding global partners for future collaboration. The ICICS-2020 was conducted in two broad categories, Intelligent Circuits & Intelligent Systems and Emerging Technologies in Electrical Engineering.

Download or read book Analysis of Metallic Shielding for Reduction of RF Induced Heating of Electrode During MRI for Active Implants written by Krishna Singhal and published by Krishna Singhal. This book was released on 2018-08-06 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The options available to patients with implantable devices are limited. It is because there are multiple interactions between the MRI environment and the implantable medical devices. The three main components of MRI systems- static magnet, RF coil, and a gradient coil- interact with the implantable medical devices. These interactions can cause force, torque, device vibrations and RF-induced heating. Among all these potential hazards is the heating caused by the RF electromagnetic field. The lead wires of the implants can act as antennas and pick up the electric field generated by the RF coil. This results in the induced current traveling along the length of the device that will dissipate as heat where it is coupled to tissue. The combination of critically sensitive tissues and high heat makes this interaction the most significant risk for patient safety. Hence, there arises a need to design effective techniques that can minimize RF heating induced during an MRI. The technique of shielding has been proven to reduce RF-induced heating. The focus of current research is to provide analysis of shielding technique for reduction of RF-induced heating of electrodes during MRI. Shielded leads have been developed as a method to reduce RF-heating responsible for temperature rise at the electrodes. The purpose of this work is to provide a quantitative understanding of how a conducting metallic shield over a lead will reduce RF heating at the electrode during MRI scans. A physical model and equations for reduction of RF heating by a shielded lead are presented. Temperature rises are calculated for different lengths of shielded and unshielded leads. Confirming measurements are made for a quarter-wavelength coaxial cable model of the lead. Measured temperature rise and transfer function depended on terminations conditions, with the shorted lead exhibiting the temperature rise sixteen times less than an open-ended lead. The information provided by this work is expected to facilitate the development of lead wires with reduced RF-induced heating. The availability of lead wires with reduced heating will allow expanded access to MRI by patients with implantable devices.

Download or read book Data Integrity and Quality written by Santhosh Kumar Balan and published by BoD – Books on Demand. This book was released on 2021-06-23 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data integrity is the quality, reliability, trustworthiness, and completeness of a data set, providing accuracy, consistency, and context. Data quality refers to the state of qualitative or quantitative pieces of information. Over five sections, this book discusses data integrity and data quality as well as their applications in various fields.

Download or read book Developing Digital RF Memories and Transceiver Technologies for Electromagnetic Warfare written by Phillip E. Pace and published by Artech House. This book was released on 2022-05-31 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive resource and thorough treatment in the latest development of Digital RF Memory (DRFM) technology and their key role in maintaining dominance over the electromagnetic spectrum. Part I discusses the use of advanced technology to design transceivers for spectrum sensing using unmanned systems to dominate the electromagnetic spectrum. Part II uses artificial intelligence and machine learning to enable modern spectrum sensing and detection signal processing for electronic support and electronic attack. Another key contribution is examination of counter-DRFM techniques. DRFM and transceiver design details and examples are provided along with the MATLAB software allowing the reader to construct their own embedded DRFM transceivers for unmanned systems. It examines the design trade-offs in developing multiple, structured, false target synthesis DRFM architectures and aids in developing counter-DRFM techniques and distinguish false target from real ones. Written by an expert in the field, and including MATLAB™ design software, this is the only comprehensive book written on the subject of DRFM.

Download or read book Digital Technologies and Applications written by Saad Motahhir and published by Springer Nature. This book was released on 2023-04-28 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents volume 1 of selected research papers presented at the third International Conference on Digital Technologies and Applications (ICDTA 23). This book highlights the latest innovations in digital technologies as: artificial intelligence, Internet of things, embedded systems, network technology, digital transformation and their applications in several areas as Industry 4.0, renewable energy, mechatronics, digital healthcare. The respective papers encourage and inspire researchers, industry professionals, and policymakers to put these methods into practice.