Download or read book Microwave and RF Design Volume 4 written by Michael Steer and published by NC State University. This book was released on 2019-09 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and RF Design: Modules focuses on the design of systems based on microwave modules. The use of modules has become increasingly important in RF and microwave engineering for rapidly realizing high performance microwave systems. When integration is ultimately to be used, building a system up using modules provides a rapid means of prototyping and testing system concepts. A wide variety of RF modules including amplifiers, local oscillators, switches, circulators, isolators, phase detectors, frequency multipliers and dividers, phase-locked loops, and direct digital synthesizers are considered. Detailed design strategies for synthesizing filters based on parallel coupled lines are presented. The reader will gain an appreciation of design by synthesis. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book. Key Features * The fourth volume of a comprehensive series on microwave and RF design * Open access ebook editions are hosted by NC State University Libraries at https://repository.lib.ncsu.edu/handle/1840.20/36776 * 23 worked examples * An average of 21 exercises per chapter * Answers to selected exercises * 6 case studies illustrating design procedures * Emphasis on synthesis as well as building a rich library of microwave functions * A companion book, Fundamentals of Microwave and RF Design, is suitable as a comprehensive undergraduate textbook on microwave engineering
Download or read book Fundamentals of Microwave and RF Design written by Michael Steer and published by NC State University. This book was released on 2019-09 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Microwave and RF Design enables mastery of the essential concepts required to cross the barriers to a successful career in microwave and RF design. Extensive treatment of scattering parameters, that naturally describe power flow, and of Smith-chart-based design procedures prepare the student for success. The emphasis is on design at the module level and on covering the whole range of microwave functions available. The orientation is towards using microstrip transmission line technologies and on gaining essential mathematical, graphical and design skills for module design proficiency. This book is derived from a multi volume comprehensive book series, Microwave and RF Design, Volumes 1-5, with the emphasis in this book being on presenting the fundamental materials required to gain entry to RF and microwave design. This book closely parallels the companion series that can be consulted for in-depth analysis with referencing of the book series being familiar and welcoming. Key Features * A companion volume to a comprehensive series on microwave and RF design * Open access ebook editions are hosted by NC State University Libraries at https://repository.lib.ncsu.edu/handle/1840.20/36776 * 59 worked examples * An average of 24 exercises per chapter * Answers to selected exercises * Emphasis on module-level design using microstrip technologies * Extensive treatment of design using Smith charts * A parallel companion book series provides a detailed reference resource
Download or read book Microwave and RF Design written by Michael Steer and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and RF Design: Networks presents the tools and techniques required to analyze and design microwave and RF circuits. Because of the finite speed of light, microwave circuits must be considered to be spatially distributed and so there is not a single ground. As such metrics that can be used to describe power flow are of most use. The topics covered include scattering parameters, signal flow graphs, and Smith charts. Acquiring expertise in these is the biggest barriers to a successful career in microwave and RF engineering. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
Download or read book Microwave and RF Engineering written by Roberto Sorrentino and published by John Wiley & Sons. This book was released on 2010-07-26 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential text for both students and professionals, combining detailed theory with clear practical guidance This outstanding book explores a large spectrum of topics within microwave and radio frequency (RF) engineering, encompassing electromagnetic theory, microwave circuits and components. It provides thorough descriptions of the most common microwave test instruments and advises on semiconductor device modelling. With examples taken from the authors' own experience, this book also covers: network and signal theory; electronic technology with guided electromagnetic propagation; microwave circuits such as linear and non-linear circuits, resonant circuits and cavities, monolithic microwave circuits (MMICs), wireless architectures and integrated circuits; passive microwave components, control components; microwave filters and matching networks. Simulation files are included in a CD Rom, found inside the book. Microwave and RF Engineering presents up-to-date research and applications at different levels of difficulty, creating a useful tool for a first approach to the subject as well as for subsequent in-depth study. It is therefore indispensable reading for advanced professionals and designers who operate at high frequencies as well as senior students who are first approaching the subject.
Download or read book Microwave Engineering written by David M. Pozar and published by John Wiley & Sons. This book was released on 2011-11-22 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pozar's new edition of Microwave Engineering includes more material on active circuits, noise, nonlinear effects, and wireless systems. Chapters on noise and nonlinear distortion, and active devices have been added along with the coverage of noise and more material on intermodulation distortion and related nonlinear effects. On active devices, there's more updated material on bipolar junction and field effect transistors. New and updated material on wireless communications systems, including link budget, link margin, digital modulation methods, and bit error rates is also part of the new edition. Other new material includes a section on transients on transmission lines, the theory of power waves, a discussion of higher order modes and frequency effects for microstrip line, and a discussion of how to determine unloaded.
Download or read book RF and Microwave Engineering written by Frank Gustrau and published by John Wiley & Sons. This book was released on 2012-06-22 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a fundamental and practical introduction to radio frequency and microwave engineering and physical aspects of wireless communication In this book, the author addresses a wide range of radio-frequency and microwave topics with emphasis on physical aspects including EM and voltage waves, transmission lines, passive circuits, antennas, radio wave propagation. Up-to-date RF design tools like RF circuit simulation, EM simulation and computerized smith charts, are used in various examples to demonstrate how these methods can be applied effectively in RF engineering practice. Design rules and working examples illustrate the theoretical parts. The examples are close to real world problems, so the reader can directly transfer the methods within the context of their own work. At the end of each chapter a list of problems is given in order to deepen the reader’s understanding of the chapter material and practice the new competences. Solutions are available on the author’s website. Key Features: Presents a wide range of RF topics with emphasis on physical aspects e.g. EM and voltage waves, transmission lines, passive circuits, antennas Uses various examples of modern RF tools that show how the methods can be applied productively in RF engineering practice Incorporates various design examples using circuit and electromagnetic (EM) simulation software Discusses the propagation of waves: their representation, their effects, and their utilization in passive circuits and antenna structures Provides a list of problems at the end of each chapter Includes an accompanying website containing solutions to the problems (http:\\www.fh-dortmund.de\gustrau_rf_textbook) This will be an invaluable textbook for bachelor and masters students on electrical engineering courses (microwave engineering, basic circuit theory and electromagnetic fields, wireless communications). Early-stage RF practitioners, engineers (e.g. application engineer) working in this area will also find this book of interest.
Download or read book Microwave and RF Design Volume 5 written by Michael Steer and published by NC State University. This book was released on 2019-09 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and RF Design: Amplifiers and Oscillators presents the design of amplifiers and oscillators in a way that enables state-of-the-art designs to be realized. Detailed strategies and case studies are presented. Design of competitive microwave amplifiers and oscillators is particularly challenging as many trade-offs are required in design, and the design decisions cannot be reduced to a formulaic flow. The emphasis is on developing design skills. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book. Key Features * The fifth volume of a comprehensive series on microwave and RF design * Open access ebook editions are hosted by NC State University Libraries at https://repository.lib.ncsu.edu/handle/1840.20/36776 * 9 worked examples * An average of 23 exercises per chapter * Answers to selected exercises * 6 extensive case studies following the design of competitive amplifiers and oscillators with world leading performance * Volume 5 of a five volume series on microwave and RF design, all available as open access ebooks * A companion book, Fundamentals of Microwave and RF Design, is suitable as a comprehensive undergraduate textbook on microwave engineering
Download or read book Microwave and RF Design written by Michael Steer and published by Scitech Pub Incorporated. This book was released on 2010 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of years of work, including the publication of a beta version so we could make sure the final product is the very best textbook available. Just as an example, the beta version was 670 pages, and comments from reviewers like you have resulted in a 1,000 page powerhouse. Written by Michael Steer, Lampe Distinguished Professor of Electrical and Computer Engineering at North Carolina State University, the independent modules in this book can be employed for a single course, or the same textbook can carry the student and instructor through multiple courses in microwave and radio frequency design. This book is a comprehensive introduction to RF and microwave design with a systems first approach. However, this does not mean that components are ignored. The book is arranged in five modules (see the TOC) that are independent but do build on each other and are best taught in sequence. Design examples are used throughout the book, and many of them incorporate design tradeoffs that are only appreciated in the context of a specific design. The book is also characterized by design emphasis with discussion of manufacturability and practical design decisions.
Download or read book Microwave and RF Design Volume 3 written by Michael Steer and published by NC State University. This book was released on 2019-09 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and RF Design: Networks presents the tools and techniques required to analyze and design microwave and RF circuits. Because of the finite speed of light, microwave circuits must be considered to be spatially distributed and so there is not a single ground. As such metrics that can be used to describe power flow are of most use. The topics covered include scattering parameters, signal flow graphs, and Smith charts. Acquiring expertise in these is the biggest barriers to a successful career in microwave and RF engineering. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book. Key Features * The third volume of a comprehensive series on microwave and RF design * Open access ebook editions are hosted by NC State University Libraries at https://repository.lib.ncsu.edu/handle/1840.20/36776 * 49 worked examples * An average of 30 exercises per chapter * Answers to selected exercises * Detailed coverage of Smith charts and how they are used in design and in interpretation * Extensive treatment of broadband matching * A companion book, Fundamentals of Microwave and RF Design, is suitable as a comprehensive undergraduate textbook on microwave engineering
Download or read book Microwave and RF Design Volume 1 written by Michael Steer and published by NC State University. This book was released on 2019-09 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and RF Design: Radio Systems is a circuits- and systems-oriented approach to modern microwave and RF systems. Sufficient details at the circuits and sub-system levels are provided to understand how modern radios are implemented. Design is emphasized throughout. The evolution of radio from what is now known as 0G, for early radio, through to 6G, for sixth generation cellular radio, is used to present modern microwave and RF engineering concepts. Two key themes unify the text: 1) how system-level decisions affect component, circuit and subsystem design; and 2) how the capabilities of technologies, components, and subsystems impact system design. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book. Key Features * The first volume of a comprehensive series on microwave and RF design * Open access ebook editions are hosted by NC State University Libraries at https://repository.lib.ncsu.edu/handle/1840.20/36776 * 31 worked examples * An average of 38 exercises per chapter * Answers to selected exercises * Coverage of cellular radio from 1G through 6G * Case study of a software defined radio illustrating how modern radios partition functionality between analog and digital domains * A companion book, Fundamentals of Microwave and RF Design, is suitable as a comprehensive undergraduate textbook on microwave engineering
Download or read book RF and Microwave Transmitter Design written by Andrei Grebennikov and published by John Wiley & Sons. This book was released on 2011-09-19 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF and Microwave Transmitter Design is unique in its coverage of both historical transmitter design and cutting edge technologies. This text explores the results of well-known and new theoretical analyses, while informing readers of modern radio transmitters' pracitcal designs and their components. Jam-packed with information, this book broadcasts and streamlines the author's considerable experience in RF and microwave design and development.
Download or read book Practical RF System Design written by William F. Egan and published by John Wiley & Sons. This book was released on 2004-03-15 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate practical resource for today's RF system design professionals Radio frequency components and circuits form the backbone of today's mobile and satellite communications networks. Consequently, both practicing and aspiring industry professionals need to be able to solve ever more complex problems of RF design. Blending theoretical rigor with a wealth of practical expertise, Practical RF System Design addresses a variety of complex, real-world problems that system engineers are likely to encounter in today's burgeoning communications industry with solutions that are not easily available in the existing literature. The author, an expert in the field of RF module and system design, provides powerful techniques for analyzing real RF systems, with emphasis on some that are currently not well understood. Combining theoretical results and models with examples, he challenges readers to address such practical issues as: * How standing wave ratio affects system gain * How noise on a local oscillator will affect receiver noise figure and desensitization * How to determine the dynamic range of a cascade from module specifications * How phase noise affects system performance and where it comes from * How intermodulation products (IMs) predictably change with signal amplitude, and why they sometimes change differently An essential resource for today's RF system engineers, the text covers important topics in the areas of system noise and nonlinearity, frequency conversion, and phase noise. Along with a wealth of practical examples using MATLAB(r) and Excel, spreadsheets are available for download from an FTP Web site to help readers apply the methods outlined in this important resource.
Download or read book Radio Frequency System Architecture and Design written by John W. M. Rogers and published by Artech House. This book was released on 2013-10-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Communication devices such as smart phones, GPS systems, and Bluetooth, are now part of our daily lives more than ever before. As our communication equipment becomes more sophisticated, so do the radios and other hardware required to enable that technology. Common radio architectures are required to make this technology work seamlessly. This resource describes practical aspects of radio frequency communications systems design, bridging the gap between system-level design considerations and circuit-level design specifications. Industry experts not only provide detailed calculations and theory to determine block level specifications, but also discuss basic theory and operational concepts. This resource also includes extensive, up-to-date application examples.
Download or read book RF Microwave Engineering and Applications in Energy Systems written by Abdullah Eroglu and published by John Wiley & Sons. This book was released on 2022-05-02 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF/MICROWAVE ENGINEERING AND APPLICATIONS IN ENERGY SYSTEMS An essential text with a unique focus on RF and microwave engineering theory and its applications In RF/Microwave Engineering and Applications in Energy Systems, accomplished researcher Abdullah Eroglu delivers a detailed treatment of key theoretical aspects of radio-frequency and microwave engineering concepts along with parallel presentations of their practical applications. The text includes coverage of recent advances in the subject, including energy harvesting methods, RFID antenna designs, HVAC system controls, and smart grids. The distinguished author provides step-by-step solutions to common engineering problems by way of numerous examples and offers end-of-chapter problems and solutions on each topic. These practical applications of theoretical subjects aid the reader with retention and recall and demonstrate a solid connection between theory and practice. The author also applies common simulation tools in several chapters, illustrating the use and implementation of time domain circuit simulators in conjunction with electromagnetic simulators, as well as Matlab for design, simulation, and implementation at the component and system levels. Readers will also benefit from: A thorough introduction to the foundations of electromagnetics, including line, surface, and volume integrals, vector operation and theorems, and Maxwell’s equations Comprehensive explorations of passive and active components in RF and microwave engineering, including resistors, capacitors, inductors, and semiconductor materials and active devices Practical discussions of transmission lines, including transmission line analysis, Smith charts, microstrip lines, and striplines In-depth examinations of network parameters, including impedance parameters, ABCD parameters, h-Hybrid parameters, and network connections Perfect for senior-level undergraduates and graduate students studying RF or Microwave engineering, RF/Microwave Engineering and Applications in Energy Systems is also an indispensable resource for professionals whose work touches on radio-frequency and microwave technologies.
Download or read book Introduction to RF Power Amplifier Design and Simulation written by Abdullah Eroglu and published by CRC Press. This book was released on 2018-09-03 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to RF Power Amplifier Design and Simulation fills a gap in the existing literature by providing step-by-step guidance for the design of radio frequency (RF) power amplifiers, from analytical formulation to simulation, implementation, and measurement. Featuring numerous illustrations and examples of real-world engineering applications, this book: Gives an overview of intermodulation and elaborates on the difference between linear and nonlinear amplifiers Describes the high-frequency model and transient characteristics of metal–oxide–semiconductor field-effect transistors Details active device modeling techniques for transistors and parasitic extraction methods for active devices Explores network and scattering parameters, resonators, matching networks, and tools such as the Smith chart Covers power-sensing devices including four-port directional couplers and new types of reflectometers Presents RF filter designs for power amplifiers as well as application examples of special filter types Demonstrates the use of computer-aided design (CAD) tools, implementing systematic design techniques Blending theory with practice, Introduction to RF Power Amplifier Design and Simulation supplies engineers, researchers, and RF/microwave engineering students with a valuable resource for the creation of efficient, better-performing, low-profile, high-power RF amplifiers.
Download or read book Microwave and RF Design of Wireless Systems written by David M. Pozar and published by John Wiley & Sons. This book was released on 2000-11-29 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: David Pozar, author of Microwave Engineering, Second Edition, has written a new text that introduces students to the field of wireless communications. This text offers a quantitative and, design-oriented presentation of the analog RF aspects of modern wireless telecommunications and data transmission systems from the antenna to the baseband level. Other topics include noise, intermodulation, dynamic range, system aspects of antennas and filter design. This unique text takes an integrated approach to topics usually offered in a variety of separate courses on topics such as antennas and proagation, microwave systems and circuits, and communication systems. This approach allows for a complete presentation of wireless telecommunications systems designs. The author's goal with this text is for the student to be able to analyze a complete radio system from the transmitter through the receiver front-end, and quantitatively evaluate factors. Suitable for a one-semester course, at the senior or first year graduate level. Note certain sections have been denoted as advanced topics, suitable for graduate level courses.
Download or read book Microstrip Filters for RF Microwave Applications written by Jia-Sheng Hong and published by John Wiley & Sons. This book was released on 2011-01-06 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of “Microstrip Filters for RF/Microwave Applications” was published in 2001. Over the years the book has been well received and is used extensively in both academia and industry by microwave researchers and engineers. From its inception as a manuscript the book is almost 8 years old. While the fundamentals of filter circuits have not changed, further innovations in filter realizations and other applications have occurred with changes in the technology and use of new fabrication processes, such as the recent advances in RF MEMS and ferroelectric films for tunable filters; the use of liquid crystal polymer (LCP) substrates for multilayer circuits, as well as the new filters for dual-band, multi-band and ultra wideband (UWB) applications. Although the microstrip filter remains as the main transmission line medium for these new developments, there has been a new trend of using combined planar transmission line structures such as co-planar waveguide (CPW) and slotted ground structures for novel physical implementations beyond the single layer in order to achieve filter miniaturization and better performance. Also, over the years, practitioners have suggested topics that should be added for completeness, or deleted in some cases, as they were not very useful in practice. In view of the above, the authors are proposing a revised version of the “Microstrip Filters for RF/Microwave Applications” text and a slightly changed book title of “Planar Filters for RF/Microwave Applications” to reflect the aforementioned trends in the revised book.
