Download or read book Microstructural Characterisation of Metals and Alloys written by P. E. J. Flewitt and published by Ashgate Publishing. This book was released on 1986 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructural and Mechanical Characterization of Alloys written by Marek Sroka and published by MDPI. This book was released on 2021-01-13 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains manuscripts related to alloys (engineering materials) to discuss potential materials, methods for improvement of the strength and cyclic properties of alloys, the stability of microstructures, the possible application of new (or improved) alloys, and the use of treatment for alloy improvement. The broad spectrum of topics included in the articles of this Special Issue demonstrates that research into the microstructural and mechanical characteristics of alloys represents a contemporary field. These topics are also envisaged to be of interest to scientists in other research centers, and we can still expect new developments in this investigation field.
Download or read book Characterization of Metals and Alloys written by Ramiro Pérez Campos and published by Springer. This book was released on 2016-10-24 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers various aspects of characterization of materials in the areas of metals, alloys, steels, welding, nanomaterials, intermetallic, and surface coatings. These materials are obtained by different methods and techniques like spray, mechanical milling, sol-gel, casting, biosynthesis, and chemical reduction among others. Some of these materials are classified according to application such as materials for medical application, materials for industrial applications, materials used in the oil industry and materials used like coatings. The authors provide a comprehensive overview of structural characterization techniques including scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, image analysis, finite element method (FEM), optical microscopy (OM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), differential thermal analysis (DTA), differential scanning calorimetry (DSC), ultraviolet–visible spectroscopy (UV-Vis), infrared photo-thermal radiometry (IPTR), electrochemical impedance spectroscopy (EIS), thermogravimetry analysis (TGA), thermo luminescence (TL), photoluminescence (PL), high resolution transmission electron microscopy (HRTEM), and radio frequency (RF). The book includes theoretical models and illustrations of characterization properties—both structural and chemical.
Download or read book Microstructure and Mechanical Properties of Structural Metals and Alloys written by Andrey Belyakov and published by MDPI. This book was released on 2019-06-24 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers collected in this special issue clearly reflect the modern research trends in materials science. These fields of specific attention are high-Mn TWIP steels, high-Cr heat resistant steels, aluminum alloys, ultrafine grained materials including those developed by severe plastic deformation, and high-entropy alloys. The major portion of the collected papers is focused on the mechanisms of microstructure evolution and the mechanical properties of metallic materials subjected to various thermo-mechanical, deformation or heat treatments. Another large portion of the studies is aimed on the elaboration of alloying design of advanced steels and alloys. The changes in phase content, transformation and particle precipitation and their effect on the properties are also broadly presented in this collection, including the microstructure/property changes caused by irradiation.
Download or read book Advances in Processing of Lightweight Metal Alloys and Composites written by R. Vaira Vignesh and published by Springer Nature. This book was released on 2022-11-18 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most important aspects of lightweight metal alloys including history, physical metallurgy, overview of production technologies, alloy development, compositing, post-processing (heat treatment, surface engineering, bulk-deformation), and joining methodologies. It discusses the microstructural evolution, fractography, morphology of corroded and worn surface to enable easy understanding of the mechanism. The topics covered in this book include lightweight metallic materials, instrumental characterization of light weight metal alloys and composites, severe plastic deformation processing of aluminum alloys, solid-state welding of aluminum alloys, aluminum metal matrix composite for automotive and aircraft applications, and heat treatment of aluminum metal matrix composites. The book is highly useful for students, researchers, academicians, scientists, and engineers working on lightweight materials.
Download or read book Microstructural Characterisation of Metals and Alloys written by P. E. J. Flewitt and published by . This book was released on 1985 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of Metals and Alloys written by Paul Holloway and published by Momentum Press. This book was released on 2010 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: A better understanding of the microstructure of metals and alloys has led to great advances in the performance and useful applications of these, the oldest of mankind's engineered materials. This book in the Materials Characterizations series focuses on the particular molecular and atomistic properties of metals insofar as how they affect the different techniques for measuring and analyzing internal structure, surface structure, and chemical/physical properties. It provides a vital connection between commonly used characterization techniques like Scanning Electron Microscopy and how such can be used in the various ways that metals are processed, machined, and used. Review of relevant mechanical and chemical properties of metals and how they affect characterization techniques Characterization techniques used for melting and casting, machining, and metallic thin films processes Concise summaries of major characterization technologies for metals and alloys, including Auger Electron Spectroscopy, Energy-Dispersive X-Ray Spectroscopy, Neutron Activation Analysis, Scanning Electron Microscopy, and Transmission Electron Spectroscopy
Download or read book Microstructural Characterization of Base Metal Alloys with Conductive Native Oxides for Electrical Contact Applications written by Bilge Seda Senturk and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructure And Properties Of Materials Vol 2 written by James C M Li and published by World Scientific Publishing Company. This book was released on 2000-10-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of an advanced textbook on microstructure and properties of materials. (The first volume is on aluminum alloys, nickel-based superalloys, metal matrix composites, polymer matrix composites, ceramics matrix composites, inorganic glasses, superconducting materials and magnetic materials). It covers titanium alloys, titanium aluminides, iron aluminides, iron and steels, iron-based bulk amorphous alloys and nanocrystalline materials.There are many elementary materials science textbooks, but one can find very few advanced texts suitable for graduate school courses. The contributors to this volume are experts in the subject, and hence, together with the first volume, it is a good text for graduate microstructure courses. It is a rich source of design ideas and applications, and will provide a good understanding of how microstructure affects the properties of materials.Chapter 1, on titanium alloys, covers production, thermomechanical processing, microstructure, mechanical properties and applications. Chapter 2, on titanium aluminides, discusses phase stability, bulk and defect properties, deformation mechanisms of single phase materials and polysynthetically twinned crystals, and interfacial structures and energies between phases of different compositions. Chapter 3, on iron aluminides, reviews the physical and mechanical metallurgy of Fe3Al and FeAl, the two important structural intermetallics. Chapter 4, on iron and steels, presents methodology, microstructure at various levels, strength, ductility and strengthening, toughness and toughening, environmental cracking and design against fracture for many different kinds of steels. Chapter 5, on bulk amorphous alloys, covers the critical cooling rate and the effect of composition on glass formation and the accompanying mechanical and magnetic properties of the glasses. Chapter 6, on nanocrystalline materials, describes the preparation from vapor, liquid and solid states, microstructure including grain boundaries and their junctions, stability with respect to grain growth, particulate consolidation while maintaining the nanoscale microstructure, physical, chemical, mechanical, electric, magnetic and optical properties and applications in cutting tools, superplasticity, coatings, transformers, magnetic recordings, catalysis and hydrogen storage.
Download or read book Microstructure and Properties in Metals and Alloys 2nd Volume written by Andrea Di Schino and published by . This book was released on 2024-06-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure design is key in targeting the desired material's properties. It is therefore essential to understand the relationship between the properties and the microstructure, as well as what is driving them via a specific process, while also considering nay additive techniques. The following five journals participate in this Topic: Coatings, Alloys, Crystals, Materials, and Metals. Contributions related to microstructure design and characterization are collected in this Topic, together with their relation to the mechanical, fatigue, wear, and corrosion resistance of different kinds of metals and alloys. The goal of this Topic is to present contributions related to the relationship between the microstructure and properties of metals and alloys for different applications, including aeronautical and aerospace applications. Different process routes are considered (thermo-mechanical routes and additive manufacturing) in this Topic. Welding is a mandatory issue in many applications; this is why contributions related to welding are also included in this Topic. The Topic includes 19 research papers, 1 communication, and 2 review papers. Among those, 11 papers were published in Metals, 8 papers in Materials, 2 in Crystals, and 1 in Coatings, covering several aspects concerning microstructure-properties relations in metals and alloys.
Download or read book Microstructure and Properties in Metals and Alloys written by Andrea Di Schino and published by Mdpi AG. This book was released on 2023-08-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure design is key in targeting the desired material's properties. Contributions related to microstructure design and characterization are collected in this Topic, together with their relation to the mechanical, fatigue, wear and corrosion resistance of different kinds of metals and alloys. The goal of this Topic is to present contributions related to the relationship between the microstructure and properties of metals and alloys for different applications, including aeronautical and aerospace applications. Different process routes are considered (thermo-mechanical routes and additive manufacturing) in this Topic. Contributions related to welding are also included.
Download or read book Microstructural Characterization of Materials written by David Brandon and published by John Wiley & Sons. This book was released on 2013-03-21 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructural characterization is usually achieved by allowing some form of probe to interact with a carefully prepared specimen. The most commonly used probes are visible light, X-ray radiation, a high-energy electron beam, or a sharp, flexible needle. These four types of probe form the basis for optical microscopy, X-ray diffraction, electron microscopy, and scanning probe microscopy. Microstructural Characterization of Materials, 2nd Edition is an introduction to the expertise involved in assessing the microstructure of engineering materials and to the experimental methods used for this purpose. Similar to the first edition, this 2nd edition explores the methodology of materials characterization under the three headings of crystal structure, microstructural morphology, and microanalysis. The principal methods of characterization, including diffraction analysis, optical microscopy, electron microscopy, and chemical microanalytical techniques are treated both qualitatively and quantitatively. An additional chapter has been added to the new edition to cover surface probe microscopy, and there are new sections on digital image recording and analysis, orientation imaging microscopy, focused ion-beam instruments, atom-probe microscopy, and 3-D image reconstruction. As well as being fully updated, this second edition also includes revised and expanded examples and exercises, with a solutions manual available at http://develop.wiley.co.uk/microstructural2e/ Microstructural Characterization of Materials, 2nd Edition will appeal to senior undergraduate and graduate students of material science, materials engineering, and materials chemistry, as well as to qualified engineers and more advanced researchers, who will find the book a useful and comprehensive general reference source.
Download or read book Microstructural and Mechanical Property Characterization of Shear Formed Aerospace Aluminum Alloys written by Lillianne P. Troeger and published by . This book was released on 2000 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced manufacturing processes such as near-net-shape forming can reduce production costs and increase the reliability of launch vehicle and airframe structural components through the reduction of material scrap and part count and the minimization of joints. The current research is an investigation of the processing-microstruture-property relationships for shear formed cylinders of the Al-Cu-Li-Mg-Ag alloy 2195 for space applications and the Al-Cu-Mg-Ag alloy C415 for airframe applications. Cylinders which had undergone various amounts of shear-forming strain were studied to correlate the grain structure, texture, and mechanical properties developed during and after shear forming.
Download or read book Microstructural and Mechanical Characterization of Alloys written by Marek Sroka and published by . This book was released on 2021 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains manuscripts related to alloys (engineering materials) to discuss potential materials, methods for improvement of the strength and cyclic properties of alloys, the stability of microstructures, the possible application of new (or improved) alloys, and the use of treatment for alloy improvement. The broad spectrum of topics included in the articles of this Special Issue demonstrates that research into the microstructural and mechanical characteristics of alloys represents a contemporary field. These topics are also envisaged to be of interest to scientists in other research centers, and we can still expect new developments in this investigation field.
Download or read book Characterisation of High temperature Materials Microstructural characterisation written by and published by Woodhead Publishing Limited. This book was released on 1988 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructural Characterisation Techniques written by Gunturi Venkata Sitarama Sastry and published by Springer Nature. This book was released on 2022-09-15 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is aimed at graduate and upper undergraduate students studying materials science and metallurgy. It comprehensively covers the topic of microstructural characterization and includes an emphasis on Fourier analysis and Fourier transformation, electron diffraction, electromagnetic waves and electron waves, lens parameters, transmission electron microscopy, optical microscopy and scanning electron microscopy. The author has included pedagogical features such as end-of-chapter exercises and worked examples with varying degrees of difficulty to augment learning and self-testing. This book will be a useful guide for upper undergraduate and graduate students along with researchers and professionals working in the field of microstructural characterization.
Download or read book Microstructural Characterization of Laser Surface Melted Fe TiC Alloys written by David A. Gilbert and published by . This book was released on 1979 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
