Download or read book Microstrip Circuit Analysis written by David H. Schrader and published by Prentice Hall. This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting an account of techniques for analyzing microstrip circuits, this text describes microstrip circuits in terms of circuitry theory and transmission line theory. It covers linear amplifier design and microstrip filter design, and introduces S parameters and Smith Charts.

Download or read book 2 D Electromagnetic Simulation of Passive Microstrip Circuits written by Alejandro D. Jimenez and published by CRC Press. This book was released on 2018-10-03 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global Demand for Streamlined Design and Computation The explosion of wireless communications has generated a tidal wave of interest and development in computational techniques for electromagnetic simulation as well as the design and analysis of RF and microwave circuits. Learn About Emerging Disciplines, State-of-the-Art Methods 2-D Electromagnetic Simulation of Passive Microstrip Circuits describes this simple procedure in order to provide basic knowledge and practical insight into quotidian problems of microstrip passive circuits applied to microwave systems and digital technologies. The text dissects the latest emerging disciplines and methods of microwave circuit analysis, carefully balancing theory and state-of-the-art experimental concepts to elucidate the process of analyzing high-speed circuits. The author covers the newer techniques – such as the study of signal integrity within circuits, and the use of field map interpretations – employed in powerful electromagnetic simulation analysis methods. But why and how does the intrinsic two-dimensional simulation model used here reduce numerical error? Step-by-Step Simulation Provides Insight and Understanding The author presents the FDTD electromagnetic simulation method, used to reproduce different microstrip test circuits, as well as an explanation of the complementary electrostatic method of moments (MoM). Each reproduces different microstrip test circuits that are physically constructed and then studied, using a natural methodological progression to facilitate understanding. This approach gives readers a solid comprehension and insight into the theory and practical applications of the microstrip scenario, with emphasis on high-speed interconnection elements.

Download or read book Foundations for Microstrip Circuit Design written by Terry C. Edwards and published by John Wiley & Sons. This book was released on 2016-02-01 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of the previous three editions, Foundations for Microstrip Circuit Design offers extensive new, updated and revised material based upon the latest research. Strongly design-oriented, this fourth edition provides the reader with a fundamental understanding of this fast expanding field making it a definitive source for professional engineers and researchers and an indispensable reference for senior students in electronic engineering. Topics new to this edition: microwave substrates, multilayer transmission line structures, modern EM tools and techniques, microstrip and planar transmision line design, transmission line theory, substrates for planar transmission lines, Vias, wirebonds, 3D integrated interposer structures, computer-aided design, microstrip and power-dependent effects, circuit models, microwave network analysis, microstrip passive elements, and slotline design fundamentals.

Download or read book Microwave Active Circuit Analysis and Design written by Clive Poole and published by Academic Press. This book was released on 2015-11-03 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches the skills and knowledge required by today’s RF and microwave engineer in a concise, structured and systematic way. Reflecting modern developments in the field, this book focuses on active circuit design covering the latest devices and design techniques. From electromagnetic and transmission line theory and S-parameters through to amplifier and oscillator design, techniques for low noise and broadband design; This book focuses on analysis and design including up to date material on MMIC design techniques. With this book you will: Learn the basics of RF and microwave circuit analysis and design, with an emphasis on active circuits, and become familiar with the operating principles of the most common active system building blocks such as amplifiers, oscillators and mixers Be able to design transistor-based amplifiers, oscillators and mixers by means of basic design methodologies Be able to apply established graphical design tools, such as the Smith chart and feedback mappings, to the design RF and microwave active circuits Acquire a set of basic design skills and useful tools that can be employed without recourse to complex computer aided design Structured in the form of modular chapters, each covering a specific topic in a concise form suitable for delivery in a single lecture Emphasis on clear explanation and a step-by-step approach that aims to help students to easily grasp complex concepts Contains tutorial questions and problems allowing readers to test their knowledge An accompanying website containing supporting material in the form of slides and software (MATLAB) listings Unique material on negative resistance oscillator design, noise analysis and three-port design techniques Covers the latest developments in microwave active circuit design with new approaches that are not covered elsewhere

Download or read book Microwave Transmission Line Circuits written by William T. Joines and published by Artech House. This book was released on 2013 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative resource offers professionals and students valuable assistance with their work and studies involving microwave circuit analysis and design. Readers gain a thorough understanding of the properties of planar transmission lines for integrated circuits. Moreover, this practical book presents matrix and computer-aided methods for analysis and design of circuit components. Engineers find in-depth details on input, output, and interstage networks, as well as coverage of stability, noise, and signal distortion.

Download or read book Foundations for Microstrip Circuit Design written by Terry C. Edwards and published by John Wiley & Sons. This book was released on 2016-04-18 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of the previous three editions, Foundations for Microstrip Circuit Design offers extensive new, updated and revised material based upon the latest research. Strongly design-oriented, this fourth edition provides the reader with a fundamental understanding of this fast expanding field making it a definitive source for professional engineers and researchers and an indispensable reference for senior students in electronic engineering. Topics new to this edition: microwave substrates, multilayer transmission line structures, modern EM tools and techniques, microstrip and planar transmision line design, transmission line theory, substrates for planar transmission lines, Vias, wirebonds, 3D integrated interposer structures, computer-aided design, microstrip and power-dependent effects, circuit models, microwave network analysis, microstrip passive elements, and slotline design fundamentals.

Download or read book Microwave Engineering Using Microstrip Circuits written by E. H. Fooks and published by . This book was released on 1990 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Foundations for Microstrip Circuit Design written by T. C. Edwards and published by . This book was released on 1981-10-12 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: A sound, fundamental approach to the application of the microstrip medium in microwave or high speed digital circuit design. Emphasizes computer-aided design methods. Describes a wide range of proven design procedures, including dispersion, discontinuities, coupled lines and special coupler designs, power losses, transitions, and measurements. Presents a critical comparison of transmission line structures for microwave ICs. Includes an appendix of existing computer program routines and design summaries.

Download or read book Microwave Circuit Analysis and Amplifier Design written by Samuel Y. Liao and published by Prentice Hall. This book was released on 1987 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microstrip Antenna written by J. R. James and published by IET. This book was released on 1986 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past few years, the concept of creating microwave antennas using microstrip has attracted increasing attention and viable practical designs are now emerging. The purpose of this monograph is to present the reader with an appreciation of the underlying physical action, up-to-date theoretical treatments, useful antenna design approaches and the overall state-of-the-art situation. The emphasis is on antenna engineering design, but to achieve this goal it has been necessary to delve into the behaviour of microstrip in a much wider sense and also include aspects of electromagnetic analysis. As a consequence, the monograph will also be of interest to microstrip circuit designers and to some extent those seeking electromagnetic problems of a challenging nature. The astronomical progress in miniaturising and integrating electronic circuits in the past decade has recently crerated a positive demand for a new generation of antenna systems. In principle, microstrip antennas are thin planar configurations that are leightweight, low cost, easy to manufacture and can be made conformal with the surfaces of vehicles, missiles etc. The compatibility of microstrip antennas with integrated electronics is another great advantage. However, the microstrip wavetrapping effects inhibit the radiation mechanism and must be taken into account in antenna design. Wave-trapping effects in substrates involve the study of surface waves and discontinuities in open waveguide structures. The microstrip antenna designer must therefore encompass many more effects than previously considered by microstrip circuit designers. It is for these reasons that the scope of this monograph is necessarily somewhat wider than the title may suggest. The ten chapters are a blend of introductory, practical and theoretical treatments and likely future developments are also highlighted. A good selection of past and current references are given and each chapter concludes with a helpful summary comment.

Download or read book Introduction to Linear Circuit Analysis and Modelling written by Luis Moura and published by Elsevier. This book was released on 2005-03-05 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Luis Moura and Izzat Darwazeh introduce linear circuit modelling and analysis applied to both electrical and electronic circuits, starting with DC and progressing up to RF, considering noise analysis along the way. Avoiding the tendency of current textbooks to focus either on the basic electrical circuit analysis theory (DC and low frequency AC frequency range), on RF circuit analysis theory, or on noise analysis, the authors combine these subjects into the one volume to provide a comprehensive set of the main techniques for the analysis of electric circuits in these areas. Taking the subject from a modelling angle, this text brings together the most common and traditional circuit analysis techniques (e.g. phasor analysis) with system and signal theory (e.g. the concept of system and transfer function), so students can apply the theory for analysis, as well as modelling of noise, in a broad range of electronic circuits. A highly student-focused text, each chapter contains exercises, worked examples and end of chapter problems, with an additional glossary and bibliography for reference. A balance between concepts and applications is maintained throughout. Luis Moura is a Lecturer in Electronics at the University of Algarve. Izzat Darwazeh is Senior Lecturer in Telecommunications at University College, London, previously at UMIST. An innovative approach fully integrates the topics of electrical and RF circuits, and noise analysis, with circuit modelling Highly student-focused, the text includes exercises and worked examples throughout, along with end of chapter problems to put theory into practice

Download or read book Introduction To Modern Planar Transmission Lines written by Anand K. Verma and published by John Wiley & Sons. This book was released on 2021-06-16 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive discussion of planar transmission lines and their applications, focusing on physical understanding, analytical approach, and circuit models Planar transmission lines form the core of the modern high-frequency communication, computer, and other related technology. This advanced text gives a complete overview of the technology and acts as a comprehensive tool for radio frequency (RF) engineers that reflects a linear discussion of the subject from fundamentals to more complex arguments. Introduction to Modern Planar Transmission Lines: Physical, Analytical, and Circuit Models Approach begins with a discussion of waves on transmission lines and waves in material medium, including a large number of illustrative examples from published results. After explaining the electrical properties of dielectric media, the book moves on to the details of various transmission lines including waveguide, microstrip line, co-planar waveguide, strip line, slot line, and coupled transmission lines. A number of special and advanced topics are discussed in later chapters, such as fabrication of planar transmission lines, static variational methods for planar transmission lines, multilayer planar transmission lines, spectral domain analysis, resonators, periodic lines and surfaces, and metamaterial realization and circuit models. Emphasizes modeling using physical concepts, circuit-models, closed-form expressions, and full derivation of a large number of expressions Explains advanced mathematical treatment, such as the variation method, conformal mapping method, and SDA Connects each section of the text with forward and backward cross-referencing to aid in personalized self-study Introduction to Modern Planar Transmission Lines is an ideal book for senior undergraduate and graduate students of the subject. It will also appeal to new researchers with the inter-disciplinary background, as well as to engineers and professionals in industries utilizing RF/microwave technologies.

Download or read book Stripline like Transmission Lines for Microwave Integrated Circuits written by Bharathi Bhat and published by New Age International. This book was released on 1989 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stripline-Like Transmission Lines For Microwave Integrated Circuits Offers A Unique Combination Of A Textbook And A Design Data Handbook. It Provides An Exhaustive Coverage Of The Analysis, Design And Applications Of Stripline-Like Transmission Lines. Starting From The Fundamental Principles, The Book Builds Up On Analytical Techniques Towards The Solution Of Various Structures In A Lucid And Systematic Manner So As To Be Of Direct Utility For Classroom Teaching. Both Quasi- Static And Hybrid-Mode Analyses Are Included. A Unified Analytical Technique Is Developed Which Is Then Applied To A Class Of Single Conductor, Edge-Coupled Andbroadside-Coupled Structures Using Isotropic/Anisotropic Substrates. The Same Technique Is Extended To Analyse Rectangular Conductor Patches, Open-Circuit End Effects And Gap Capacitances In These Structures. The Analyses Of Losses And Details Of Power Handling Capability Are Also Presented. For R & D Engineers Involved In Mic Design, The Book Offers Unified Formulas And Closed Form Expressions Which Are Readily Programmable, Graphical Illustrations And Extensive Tables Of Data On Propagation Parameters For A Wide Variety Of Practical Structures Using Commercially Available Dielectric Substrates. The Book Concludes With A Chapter On Circuit Applications Which Discusses The Constructional Features, Transitions To Coaxial Lines And Waveguides, And Design Aspects Of A Member Of Mic Components--Couplers, Hybrids, Baluns, Power Dividers, Filters, Pin Diode Switches, Attenuators And Phase Shifters, And Mixers.

Download or read book Practical Microstrip Design and Applications written by Günter Kompa and published by Artech House Publishers. This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a comprehensive, practical treatment of microstrip circuit design and thorough look at the underpinnings of this important area of planar technology, this unique book is the perfect reference for engineers at all levels. The book provides you with an in-depth survey of microstrip technique and shows you how to overcome design problems with quarter/half wavelength and multistep transformers, power amplifier matching, and filter circuits. Moreover, you find expert guidance in avoiding the parasitics caused by higher-order modes.

Download or read book Microstrip Lines and Slotlines Third Edition written by Ramesh Garg and published by Artech House. This book was released on 2013-05-01 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the second edition of this book was published in 1996, planar transmission line technology has progressed considerably due to developments in ultrawideband (UWB) communications, imaging, and RFID applications. In addition, the simultaneous demands for compactness of wireless electronic devices while meeting improved performance requirements, necessitates increased use of computer-aided design, simulation, and analysis by microwave engineers. This book is written to help engineers successfully meet these challenges. Details include the development of governing equations, basis functions, Green’s function and typical results. More than 1200 equations supplement the text. Special attention is given to the use of simulation software in the design of complex devices and understanding the connection between data collected from simulation software and the actual design process. The book is primarily intended for microwave design engineers and R&D specialists who need to employ planar transmission lines in designing distributed circuits and antenna systems for a wide range of wireless applications. Advanced undergraduate and graduate students in electronics and telecommunication engineering will also welcome this addition to your library.

Download or read book Microwave Circuits written by Vincent F. Fusco and published by Prentice Hall. This book was released on 1987 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Foundations for Microstrip Circuit Design written by Terence Charles Edwards and published by . This book was released on 1992 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an explanation of the design of microstrip components and circuits for microwave, millimetre-wave and high-speed digital sub-systems. Design formulae and procedures are outlined and emphasis is placed on techniques suitable for fast computer-aided engineering.