Download or read book The Microscopic Analysis of Metals written by Floris Osmond and published by . This book was released on 1904 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Metallography of Steels Interpretation of Structure and the Effects of Processing written by Hubertus Colpaert and published by ASM International. This book was released on 2018-08-01 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Download or read book The Microscopic Analysis of Metals written by Floris Osmond and published by . This book was released on 1913 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microscopic Analysis of Metals written by Floris Osmond and published by . This book was released on 1904 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallographer s Guide written by B. L. Bramfitt and published by ASM International. This book was released on 2001-01-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a solid overview of the important metallurgical concepts related to the microstructures of irons and steels, and it provides detailed guidelines for the proper metallographic techniques used to reveal, capture, and understand microstructures. This book provides clearly written explanations of important concepts, and step-by-step instructions for equipment selection and use, microscopy techniques, specimen preparation, and etching. Dozens of concise and helpful “metallographic tips” are included in the chapters on laboratory practices and specimen preparation. The book features over 500 representative microstructures, with discussions of how the structures can be altered by heat treatment and other means. A handy index to these images is provided, so the book can also be used as an atlas of iron and steel microstructures.
Download or read book Microscopic Analysis of Metals written by Floris Osmond and published by . This book was released on 1913 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microscopic Analysis of Metals written by Floris Osmond and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Characterization written by Yang Leng and published by John Wiley & Sons. This book was released on 2009-03-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.
Download or read book Non destructive Micro Analysis of Cultural Heritage Materials written by K. Janssens and published by Elsevier. This book was released on 2004-11-26 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the scientific and technical background materials of non-destructive methods of microscopic analysis that are suitable for analysing works of art, museum pieces and archeaological artefacts. Written by experts in the field, this multi-author volume contains a number of case studies, illustrating the value of these methods. The book is suited to natural scientists and analysts looking to increase their knowledge of the various methods that are currently available for non-destructive analysis. It is also the perfect resource for museum curators, archaeologists and art-historians seeking to identify one or more suitable methods of analysis that could solve material-related problems.
Download or read book New Technologies Development and Application written by Isak Karabegović and published by Springer. This book was released on 2018-05-14 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers included in this book were presented at the International Conference “New Technologies, Development and Application,” which was held at the Academy of Sciences and Arts of Bosnia and Herzegovina in Sarajevo, Bosnia and Herzegovina on 28th–30th June 2018. The book covers a wide range of technologies and technical disciplines including complex systems such as: Robotics, Mechatronics Systems, Automation, Manufacturing, Cyber-Physical Systems, Autonomous Systems, Sensors, Networks, Control Systems, Energy Systems, Automotive Systems, Biological Systems, Vehicular Networking and Connected Vehicles, Effectiveness and Logistics Systems, Smart Grids, Nonlinear Systems, Power Systems, Social Systems, and Economic Systems.
Download or read book Microscopic Methods in Metals written by Ulrich Gonser and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of scientific investigation can be divided into two categories: they are either macroscopic or microscopic in nature. The former are generally older, classical methods where the sample as a whole is studied and various local prop erties are deduced by differentiation. The microscopic methods, on the other hand, have been discovered and developed more recently, and they operate for the most part on an atomistic scale. Glancing through the shelves of books on the various scientific fields, and, in particular, on the field of physical metallurgy, we are surprised at how lit tle consideration has been given to the microscopic methods. How these tools provide new insight and information is a question which so far has not at tracted much attention. Similar observations can be made at scientific confer ences, where the presentation of papers involving microscopic methods is often pushed into a far corner. This has led users of such methods to organize their own special conferences. The aim of this book is to bridge the present gap and encourage more interaction between the various fields of study and selected microscopic meth ods, with special emphasis on their suitability for investigating metals. In each case the principles of the method are reviewed, the advantages and successes pointed out, but also the shortcomings and limitations indicated.
Download or read book Scanning Electron Microscopy and X Ray Microanalysis written by Joseph Goldstein and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has evolved by processes of selection and expansion from its predecessor, Practical Scanning Electron Microscopy (PSEM), published by Plenum Press in 1975. The interaction of the authors with students at the Short Course on Scanning Electron Microscopy and X-Ray Microanalysis held annually at Lehigh University has helped greatly in developing this textbook. The material has been chosen to provide a student with a general introduction to the techniques of scanning electron microscopy and x-ray microanalysis suitable for application in such fields as biology, geology, solid state physics, and materials science. Following the format of PSEM, this book gives the student a basic knowledge of (1) the user-controlled functions of the electron optics of the scanning electron microscope and electron microprobe, (2) the characteristics of electron-beam-sample inter actions, (3) image formation and interpretation, (4) x-ray spectrometry, and (5) quantitative x-ray microanalysis. Each of these topics has been updated and in most cases expanded over the material presented in PSEM in order to give the reader sufficient coverage to understand these topics and apply the information in the laboratory. Throughout the text, we have attempted to emphasize practical aspects of the techniques, describing those instru ment parameters which the microscopist can and must manipulate to obtain optimum information from the specimen. Certain areas in particular have been expanded in response to their increasing importance in the SEM field. Thus energy-dispersive x-ray spectrometry, which has undergone a tremendous surge in growth, is treated in substantial detail.
Download or read book Metallography Principles and Practice written by George F. Vander Voort and published by ASM International. This book was released on 1999-01-01 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers a comprehensive source of information on metallographic techniques and their application to the study of metals, ceramics, and polymers. It contains an extensive collection of micro- and macrographs.
Download or read book Quantitative Microscopy written by University of Florida and published by . This book was released on 1968 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Metal Matrix Composites written by T. W. Clyne and published by Cambridge University Press. This book was released on 1993 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal matrix composites constitute a new class of materials, now starting to make a major industrial impact in fields as diverse as aerospace, automotives and electronics. This book gives a comprehensive, integrated coverage of these materials, including the background to analytical-, experimental-, production and application-oriented aspects. Clear pictorial descriptions are given of the basic principles governing various properties and characteristics; these encompass mechanical, thermal, electrical, environmental and wear behaviour. Coverage also extends to material processing and component fabrication aspects and to a survey of commercial usage. This book is aimed primarily at scientists, engineers, production managers and all those involved in research on new materials in general, and metal matrix composites in particular, but may also be suitable for use as a text in beginning graduate and advanced undergraduate courses.
Download or read book Microscopic Determination of the Ore Minerals written by M. N. Short and published by . This book was released on 1948 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
