Download or read book Microprocessors in Signal Processing Measurement and Control written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: In racent years the LSI technology has witnessed a revoluti onary development, and allowed substantial reductions in the size and cost of digital logic circuitry. Computer system building blocks have progressed from the level of discrete components to the level of complex ICs involving many logic circuits on a single "chip". The invention and wide applica tions of microprocessors have changed the philosophy of the signal processing, measurement and control engineering fields. The microprocessor-based digital signal processing systems and controllers have replaced the conventional ones based on standard analog and digital computing equipment. The first microprocessors and "on-chip" computers have appeared towards the end of 71 beginning 72. Their evolution since then and the number of applications, in which they have been utilized, have both been extremely spectacular. New system concepts and hardware/software tools are steadily under development to sup port the microprocessor in its multiple and complex tasks. The goal of this book is to provide a cohesive and well-balan ced set of contributions dealing with important aspects and applications of microprocessors to signal processing, measu rement and system control. The majority of contributions in clude sufficient review material and present rather complete treatments of the respective topics.
Download or read book Microprocessors for Measurement and Control written by David M. Auslander and published by . This book was released on 1981-01-01 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plans and specifications for prototype systems accompany discussion on the roles of microprocessors in instrumentation and control as well as techniques for designing process and mechanical equipment utilizing microprocessor real-time computer systems
Download or read book Microprocessors in Industrial Measurement and Control written by Marvin D. Weiss and published by T A B/T P R. This book was released on 1987 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Instrumentation written by Gina Carol Barney and published by . This book was released on 1988 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Instrumentation written by George C. Barney and published by . This book was released on 1988 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microprocessor Based Control Systems written by N.K. Sinha and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in LSI technology and the consequent availability of inexpensive but powerful microprocessors have already affected the process control industry in a significant manner. Microprocessors are being increasingly utilized for improving the performance of control systems and making them more sophisticated as well as reliable. Many concepts of adaptive and learning control theory which were considered impractical only 20 years ago are now being implemented. With these developments there has been a steady growth in hardware and software tools to support the microprocessor in its complex tasks. With the current trend of using several microprocessors for performing the complex tasks in a modern control system, a great deal of emphasis is being given to the topic of the transfer and sharing of information between them. Thus the subject of local area networking in the industrial environment has become assumed great importance. The object of this book is to present both hardware and software concepts that are important in the development of microprocessor-based control systems. An attempt has been made to obtain a balance between theory and practice, with emphasis on practical applications. It should be useful for both practicing engineers and students who are interested in learning the practical details of the implementation of microprocessor-based control systems. As some of the related material has been published in the earlier volumes of this series, duplication has been avoided as far as possible.
Download or read book Microprocessors in Process Control written by J. Borer and published by Springer Science & Business Media. This book was released on 1991-08-31 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analog Interfacing to Embedded Microprocessor Systems written by Stuart R. Ball and published by Elsevier. This book was released on 2004 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: System Design; Digital to Analog Converters; Sensors; Time-Based Measurements; Output Control Methods; Solenoids, Relays, and Other Analog Outputs; Motors; EMI; High Precision Applications; Standard Interfaces.
Download or read book PC Based Instrumentation and Control written by Michael H. Tooley and published by Routledge. This book was released on 2005 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: . Save money and increase efficiency by using a standard PC platform to solve a wide variety of control, instrumentation and measurement problems . Designed for practicing engineers and technicians, this book is also ideal for educational courses in control, instrumentation and measurement . A companion website provides downloadable executables, source code, links to manufacturers and suppliers, and additional reference material PC Based Instrumentation and Control is a guide to implementing computer control, instrumentation and data acquisition using a standard PC and some of the most popular computer languages. Numerous sample applications, complete with examples of working circuits and representative software, make this a practical, hands-on guide to implementing a vast range of PC-based testing, measurement, and control systems. Advice is given on modifying the circuits and software routines to meet the reader's specific needs. The third edition includes updated coverage of PC hardware and bus systems, an expanded chapter on reliability and fault-finding, a new chapter on virtual instruments and an introduction to programming and software development in a modern 32-bit environment. Additional examples have been included, with source code and executables available for download from the companion website www.key2control.com.
Download or read book An Introduction to Control and Measurement with Microcomputers written by Robert Louis Dalglish and published by CUP Archive. This book was released on 1987-11-19 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to microcomputers & their applications to control & data acquisition reveals how computer systems can be interfaced to communication systems.
Download or read book Microprocessors in Instruments and Control written by Robert J. Bibbero and published by John Wiley & Sons. This book was released on 1977 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Static and dynamic calculations for instruments. Process control fundamentals. Digital computation and systems. Characteristics of microprocessors. Software for microprocessors. Development of digital control algorithms. Digital control of instruments (multichannel spectrometer). Advanced digital instrumentation (GC computing and recording). Distributed microprocessor control systems.
Download or read book Application of Microprocessors in Devices for Instrumentation and Automatic Control written by Institute of Measurement and Control and published by . This book was released on 1980 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microcomputers for Process Control written by R. C. Holland and published by Elsevier. This book was released on 2013-10-22 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microcomputers for Process Control provides an introduction to microprocessor technology for process monitoring and control. The book begins with an overview of microprocessor applications in areas such as consumer products, factories, and telecommunications. This is followed by separate chapters that discuss microcomputer technology; electrical interface to enable plant monitoring and control by microcomputer; microcomputer system hardware and software; VDU-based plant monitoring systems; and methods of computer control. This book is aimed at practicing engineers in industry who wish to acquire a base of understanding of this technology and also to learn how microcomputers can actually be applied in real plant situations. Considerable emphasis is given to plant measurements, interfacing techniques and applications of microcomputers for plant monitoring and control. No prior knowledge of microprocessor technology is assumed, but some awareness of plant measurement and control problems will assist the reader. Students undertaking engineering courses which include microelectronics or process control studies should also find the text helpful.
Download or read book Real Time Microcomputer Control of Industrial Processes written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of the microprocessor in computer and system engineering has motivated the development of many new concepts and has simplified the design of many modern industrial systems. During the first decade of their life. microprocessors have shown a tremendous evolution in all possible directions (technology. power. functionality. I/O handling. etc). Of course putting the microprocessors and their environmental devices into properly operating systems is a complex and difficult task requiring high skills for melding and integrating hardware. and systemic components. software This book was motivated by the editors' feeling that a cohesive reference is needed providing a good coverage of modern industrial applications of microprocessor-based real time control, together with latest advanced methodological issues. Unavoidably a single volume cannot be exhaustive. but the present book contains a sufficient number of important real-time applications. The book is divided in two sections. Section I deals with general hardware. software and systemic topics. and involves six chapters. Chapter 1. by Gupta and Toong. presents an overview of the development of microprocessors during their first twelve years of existence. Chapter 2. by Dasgupta. deals with a number of system software concepts for real time microprocessor-based systems (task scheduling. memory management. input-output aspects. programming language reqUirements.
Download or read book Microprocessor System written by Saifullah Khalid and published by Laxmi Publications. This book was released on 2009-05 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Information Processing in Automatic Control AIPAC 89 written by R. Husson and published by Elsevier. This book was released on 2014-05-23 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Processing is a key area of research and development and the symposium presented state-of-the-art reports on some of the areas which are of relevance in automatic control: fault diagnosis and system reliability. Papers also covered the role of expert systems and other knowledge based systems, which are needed, to cope with the vast quantities of data generated by large scale systems. This volume should be considered essential reading for anyone involved in this rapidly developing area.
Download or read book Microprocessor based Process Control written by Curtis D. Johnson and published by Prentice Hall. This book was released on 1984 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
