Download or read book Micromechanics of Flow in Solids written by John Joseph Gilman and published by . This book was released on 1969 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micromechanics of Flow in Solids written by John Joseph Gilman and published by . This book was released on 1969 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micromechanics and Nanoscale Effects written by Vasyl Michael Harik and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume consists of the state-of-the-art reports on new developments in micromechanics and the modeling of nanoscale effects, and is a companion book to the recent Kluwer volume on nanomechanics and mul- scale modeling (it is entitled Trends in Nanoscale Mechanics). The two volumes grew out of a series of discussions held at NASA Langley Research Center (LaRC), lectures and other events shared by many researchers from the national research laboratories and academia. The key events include the 2001 Summer Series of Round-Table Discussions on Nanotechnology at ICASE Institute (NASA LaRC) organized by Drs. V. M. Harik and M. D. Salas and the 2002 NASA LaRC Workshop on Multi-scale Modeling. The goal of these interactions was to foster collaborations between academic researchers and the ICASE Institute (NASA LaRC), a universi- based institute, which has pioneered world-class computational, theoretical and experimental research in the disciplines that are important to NASA. Editors gratefully acknowledge help of Ms. E. Todd (ICASE, NASA LaRC), the ICASE Director M. D. Salas and all reviewers, in particular, Dr. B. Diskin (ICASE/NIA, NASA LaRC), Prof. R. Haftka (University of Florida), Dr. V. M. Harik (ICASE/Swales Aerospace, NASA LaRC), Prof.
Download or read book Micromechanics of Defects in Solids written by T. Mura and published by Springer Science & Business Media. This book was released on 1987-11-30 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book stems from a course on Micromechanics that I started about fifteen years ago at Northwestern University. At that time, micromechanics was a rather unfamiliar subject. Although I repeated the course every year, I was never convinced that my notes have quite developed into a final manuscript because new topics emerged constantly requiring revisions, and additions. I finally came to realize that if this is continued, then I will never complete the book to my total satisfaction. Meanwhile, T. Mori and I had coauthored a book in Japanese, entitled Micromechanics, published by Baifu-kan, Tokyo, in 1975. It received an extremely favorable response from students and re searchers in Japan. This encouraged me to go ahead and publish my course notes in their latest version, as this book, which contains further development of the subject and is more comprehensive than the one published in Japanese. Micromechanics encompasses mechanics related to microstructures of materials. The method employed is a continuum theory of elasticity yet its applications cover a broad area relating to the mechanical behavior of materi als: plasticity, fracture and fatigue, constitutive equations, composite materi als, polycrystals, etc. These subjects are treated in this book by means of a powerful and unified method which is called the 'eigenstrain method. ' In particular, problems relating to inclusions and dislocations are most effectively analyzed by this method, and therefore, special emphasis is placed on these topics.
Download or read book Micromechanics written by S. Nemat-Nasser and published by Elsevier. This book was released on 2013-10-22 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview is given in this book towards a fundamental understanding of the micromechanics of the overall response and failure modes of advanced materials, such as ceramics and ceramic and other composites. These advanced materials have become the focus of systematic and extensive research in recent times. The book consists of two parts. The first part reviews solids with microdefects such as cavities, cracks, and inclusions, as well as elastic composites. To render the book self-contained, the second part focuses on the fundamentals of continuum mechanics, particularly linear elasticity which forms the basis for the development of small deformation micromechanics. In Part 1, a fundamental and general framework for quantitative, rigorous analysis of the overall response and failure modes of microstructurally heterogeneous solids is systematically developed. These expressions apply to broad classes of materials with inhomogeneities and defects. While for the most part, the general framework is set within linear elasticity, the results directly translate to heterogeneous solids with rate-dependent or rate-independent inelastic constituents. This application is specifically referred to in various chapters. The general exact correlations obtained between the overall properties and the microstructure are then used together with simple models, to develop techniques for direct quantitative evaluation of the overall response which is generally described in terms of instantaneous overall moduli or compliance. The correlations among the corresponding results for a variety of problems are examined in great detail. The bounds as well as the specific results, include new observations and original developments, as well as an in-depth account of the state of the art. Part 2 focuses on Elasticity. The section on variational methods includes some new elements which should prove useful for application to advanced modeling, as well as solutions of composites and related heterogeneous bodies. A brief modern version of elements in vector and tensor algebra is provided which is particularly tailored to provide a background for the rest of this book. The data contained in this volume as Part 1 includes new results on many basic issues in micromechanics, which will be helpful to graduate students and researchers involved with rigorous physically-based modeling of overall properties of heterogeneous solids.
Download or read book Micromechanics and Nanomechanics of Composite Solids written by Shaker A. Meguid and published by Springer. This book was released on 2017-07-19 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book elucidates the most recent and highly original developments in the fields of micro- and nanomechanics and the corresponding homogenization techniques that can be reliably adopted and applied in determining the local properties, as well as the linear and nonlinear effective properties of the final architecture of these complex composite structures. Specifically, this volume, divided into three main sections—Fundamentals, Modeling, and Applications—provides recent developments in the mathematical framework of micro- and nanomechanics, including Green’s function and Eshelby’s inclusion problem, molecular mechanics, molecular dynamics, atomistic based continuum, multiscale modeling, and highly localized phenomena such as microcracks and plasticity. It is a compilation of the most recent efforts by a group of the world’s most talented and respected researchers. Ideal for graduate students in aerospace, mechanical, civil, material science, life sciences, and biomedical engineering, researchers, practicing engineers, and consultants, the book provides a unified approach in compiling micro- and nano-scale phenomena. · Elucidates recent and highly original developments in the fields of micromechanics and nanomechanics and the corresponding homogenization techniques; · Includes several new topics that are not covered in the current literature, such as micromechanics of metamaterials, electrical conductivity of CNT and graphene nanocomposites, ferroelectrics, piezoelectric, and electromagnetic materials; · Addresses highly localized phenomena such as coupled field problems, microcracks, inelasticity, dispersion of CNTs, synthesis, characterization and a number of interesting applications; · Maximizes readers’ ability to apply theories of micromechanics and nanomechanics to heterogeneous solids; · Illustrates application of micro- and nanomechanical theory to design novel composite and nanocomposite materials.
Download or read book Micromechanics of Granular Materials written by Bernard Cambou and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nearly all solids are compised of grains. However most studies treat materials as a continious solid. The book applies analysis used on loose granular materials to dense grainular materials. This title’s main focus is devoted to static or dynamic loadings applied to dense materials, although rapid flows and widely dispersed media are also mentioned briefly. Three essential areas are covered: Local variable analysis: Contact forces, displacements and rotations, orientation of contacting particles and fabric tensors are all examples of local variables. Their statistical distributions, such as spatial distribution and possible localization, are analyzed, taking into account experimental results or numerical simulations. Change of scales procedures: Also known as “homogenization techniques”, these procedures make it possible to construct continuum laws to be used in a continuum mechanics approach or performing smaller scale analyses. Numerical modeling: Several methods designed to calculate approximate solutions of dynamical equations together with unilateral contact and frictional laws are presented, including molecular dynamics, the distinct element method and non-smooth contact dynamics. Numerical examples are given and the quality of numerical approximations is discussed.
Download or read book Introduction To Micromechanics And Nanomechanics 2nd Edition written by Shaofan Li and published by World Scientific Publishing Company. This book was released on 2017-12-05 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a systematic treatise on micromechanics and nanomechanics, which encompasses many important research and development areas such as composite materials and homogenizations, mechanics of quantum dots, multiscale analysis and mechanics, defect mechanics of solids including fracture and dislocation mechanics, etc.In this second edition, some previous chapters are revised, and some new chapters added — crystal plasticity, multiscale crystal defect dynamics, quantum force and stress, micromechanics of metamaterials, and micromorphic theory.The book serves primarily as a graduate textbook and intended as a reference book for the next generation of scientists and engineers. It also has a unique pedagogical style that is specially suitable for self-study and self-learning for many researchers and professionals who do not have time attending classes and lectures.
Download or read book Physics of Granular Suspensions written by Marco Mazzuoli and published by Springer Nature. This book was released on with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1978 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Modelling of Concrete Structures written by Gunther Meschke and published by CRC Press. This book was released on 2006-03-16 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceedings brings together the work of researchers and practising engineers concerned with computational modelling of complex concrete, reinforced concrete and prestressed concrete structures in engineering practice. The subjects considered include computational mechanics of concrete and other cementitious materials, including masonry. Advanced discretisation methods and microstructural aspects within multi-field and multi-scale settings are discussed, as well as modelling formulations and constitutive modelling frameworks and novel experimental programmes. The conference also considered the need for reliable, high-quality analysis and design of concrete structures in regard to safety-critical structures, with a view to adopting these in codes of practice or recommendations. The book is of special interest to researchers in computational mechanics, and industry experts in complex nonlinear simulations of concrete structures.
Download or read book Granular Materials written by S Joseph Antony and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Granular materials play an important role in many industries. Continuous ingenuity and advancement in these industries necessitates the ability to predict the fundamental behaviour of granular materials under different working environments. With contributions from international experts in the field Granular Materials; Fundamentals and Applications details recent advances made in theoretical computational and experimental approaches in understanding the behaviour of granular materials including industrial applications. Topics covered include: * key features of granular plasticity * high temperature particle interactions * influence of polymers on particulate dispersion stability: scanning probe microscopy investigations * in-process measurement of particulate systems Presented by world renowned researchers this book will be welcomed by scientists and engineers working across a wide spectrum of engineering disciplines.
Download or read book Computational Fluid and Solid Mechanics 2003 written by K.J Bathe and published by Elsevier. This book was released on 2003-06-02 with total page 2485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the world's leading researchers and practitioners of computational mechanics, these new volumes meet and build on the eight key challenges for research and development in computational mechanics.Researchers have recently identified eight critical research tasks facing the field of computational mechanics. These tasks have come about because it appears possible to reach a new level of mathematical modelling and numerical solution that will lead to a much deeper understanding of nature and to great improvements in engineering design.The eight tasks are: - The automatic solution of mathematical models - Effective numerical schemes for fluid flows - The development of an effective mesh-free numerical solution method - The development of numerical procedures for multiphysics problems - The development of numerical procedures for multiscale problems - The modelling of uncertainties - The analysis of complete life cycles of systems - Education - teaching sound engineering and scientific judgement Readers of Computational Fluid and Solid Mechanics 2003 will be able to apply the combined experience of many of the world's leading researchers to their own research needs. Those in academic environments will gain a better insight into the needs and constraints of the industries they are involved with; those in industry will gain a competitive advantage by gaining insight into the cutting edge research being carried out by colleagues in academia. Features - Bridges the gap between academic researchers and practitioners in industry - Outlines the eight main challenges facing Research and Design in Computational mechanics and offers new insights into the shifting the research agenda - Provides a vision of how strong, basic and exciting education at university can be harmonized with life-long learning to obtain maximum value from the new powerful tools of analysis
Download or read book Micro and Opto Electronic Materials and Structures Physics Mechanics Design Reliability Packaging written by Ephraim Suhir and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 1471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides the most comprehensive, up-to-date and easy-to-apply information on the physics, mechanics, reliability and packaging of micro- and opto-electronic materials. It details their assemblies, structures and systems, and each chapter contains a summary of the state-of-the-art in a particular field. The book provides practical recommendations on how to apply current knowledge and technology to design and manufacture. It further describes how to operate a viable, reliable and cost-effective electronic component or photonic device, and how to make such a device into a successful commercial product.
Download or read book Continuous and Discontinuous Modelling of Cohesive Frictional Materials written by P.A. Vermeer and published by Springer. This book was released on 2008-01-11 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: A knowledge of the mechanical behaviour of both naturally occurring materials, such as soils and rocks, and artificial materials such as concrete and industrial granular matter, is of fundamental importance to their proper use in engineering and scientific applications. This volume contains selected lectures by international experts on current developments and problems in the numerical modelling of cohesive-frictional materials which provide a deeper understanding of the microscopic and macroscopic description of such materials. This book fills a gap by emphasizing the cross-fertilization of ideas between engineers and scientists engaged in this exciting field of research.
Download or read book IUTAM Symposium on Micro and Macrostructural Aspects of Thermoplasticity written by O.T. Bruhns and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium held in Bochum, Germany, 25-29 August 1997
Download or read book Handbook of Micromechanics and Nanomechanics written by Shaofan Li and published by CRC Press. This book was released on 2016-04-19 with total page 1256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest developments and applications of micromechanics and nanomechanics. It particularly focuses on some recent applications and impact areas of micromechanics and nanomechanics that have not been discussed in traditional micromechanics and nanomechanics books on metamaterials, micromechanics of ferroelectric/piezoelectric,
