Download or read book Microengineering of Metals and Ceramics Part I written by Henry Baltes and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructures, electronics, nanotechnology - these vast fields of research are growing together as the size gap narrows and many different materials are combined. Current research, engineering sucesses and newly commercialized products hint at the immense innovative potentials and future applications that open up once mankind controls shape and function from the atomic level right up to the visible world without any gaps. In this volume, authors from three major competence centres for microengineering illustrate step by step the process from designing and simulating microcomponents of metallic and ceramic materials to replicating micro-scale components by injection molding.

Download or read book Microengineering of Metals and Ceramics Part I Design Tooling and Injection Molding written by Henry Baltes and published by . This book was released on 2005 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructures, electronics, nanotechnology - these vast fields of research are growing together as the size gap narrows and many different materials are combined. Current research, engineering successes and newly commercialized products hint at the immense innovative potentials and future applications that open up once mankind controls shape and function from the atomic level right up to the visible world without any gaps. In this volume, authors from three major competence centres for microengineering illustrate step-by-step the process from designing and simulating microcomponents of metallic and ceramic materials to replicating micro-scale components by injection molding.

Download or read book Microengineering of Metals and Ceramics written by Henry Baltes and published by Wiley-VCH. This book was released on 2005 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructures, electronics, nanotechnology - these vast fields of research are growing together as the size gap narrows and many different materials are combined. Current research, engineering sucesses and newly commercialized products hint at the immense innovative potentials and future applications that open up once mankind controls shape and function from the atomic level right up to the visible world without any gaps. Continuing from the previous volume, authors from three major competence centres for microengineering here cover all aspects of specialized replication techniques and how to employ state-of-the-art technologies for testing and characterizing micro-scale components, and illustrate quality control aspects and strategies for automation of production procedures in view of future industrial production and commercialisation.

Download or read book Microengineering of Metals and Ceramics written by Henry Baltes and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructures, electronics, nanotechnology - these vast fields of research are growing together as the size gap narrows and many different materials are combined. Current research, engineering sucesses and newly commercialized products hint at the immense innovative potentials and future applications that open up once mankind controls shape and function from the atomic level right up to the visible world without any gaps. Continuing from the previous volume, authors from three major competence centres for microengineering here cover all aspects of specialized replication techniques and how to employ state-of-the-art technologies for testing and characterizing micro-scale components, and illustrate quality control aspects and strategies for automation of production procedures in view of future industrial production and commercialisation.

Download or read book Micro Manufacturing written by Muammer Koç and published by John Wiley & Sons. This book was released on 2011-05-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of its kind to collectively address design-based and mechanical micro-manufacturing topics in one place. It focuses on design and materials selection, as well as the manufacturing of micro-products using mechanical-based micro-manufacturing process technologies. After addressing the fundamentals and non-metallic-based micro-manufacturing processes in the semiconductor industry, it goes on to address specific metallic-based micro-manufacturing processes, such as: micro-forming, micro-machining, micro-molding, micro-laser processing, micro-layered manufacturing, micro-joining, micro-assembly and materials handling, and microEDM and ECM. The book provides an in-depth understanding of materials behavior at micro-scales and under different micro-scale processing conditions, while also including a wide variety of emerging micro-scale manufacturing issues and examples.

Download or read book Microengineering of Metals and Ceramics Part I written by Detlef Löhe and published by Wiley-VCH. This book was released on 2005-08-26 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructures, electronics, nanotechnology - these vast fields of research are growing together as the size gap narrows and many different materials are combined. Current research, engineering sucesses and newly commercialized products hint at the immense innovative potentials and future applications that open up once mankind controls shape and function from the atomic level right up to the visible world without any gaps. In this volume, authors from three major competence centres for microengineering illustrate step by step the process from designing and simulating microcomponents of metallic and ceramic materials to replicating micro-scale components by injection molding.

Download or read book Micro Process Engineering written by Norbert Kockmann and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of 'Micro Process Engineering' was originally published in the successful series 'Advanced Micro & Nanosystems'. Authors from leading industrial players and research institutions present a concise and didactical introduction to Micro Process Engineering, the combination of microtechnology and process engineering into a most promising and powerful tool for revolutionizing chemical processes and industrial mass production of bulk materials, fine chemicals, pharmaceuticals and many other products. The book takes the readers from the fundamentals of engineering methods, transport processes, and fluid dynamics to device conception, simulation and modelling, control interfaces and issues of modularity and compatibility. Fabrication strategies and techniques are examined next, focused on the fabrication of suitable microcomponents from various materials such as metals, polymers, silicon, ceramics and glass. The book concludes with actual applications and operational aspects of micro process systems, giving broad coverage to industrial efforts in America, Europe and Asia as well as laboratory equipment and education.

Download or read book Nanotechnology in a Nutshell written by Christian Ngô and published by Springer Science & Business Media. This book was released on 2014-01-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new high-level book for professionals from Atlantis Press providing an overview of nanotechnologies now and their applications in a broad variety of fields, including information and communication technologies, environmental sciences and engineering, societal life, and medicine, with provision of customized treatments. The book shows where nanotechnology is now - a fascinating time when the science is transitioning into complex systems with impact on new products. Present and future developments are addressed, as well as a larger number of new industrial and research opportunities deriving from this domain. An overview for professionals, researchers and policy-makers of this very rapidly expanding field. Brief chapters and colour figures with a contained overall length make the book attractive at an attractive price - a must for every professional’s shelf. Mihail C. Roco, National Science Foundation and National Nanotechnology Initiative, wrote the preface underlying the importance and weight of the present book to this exciting and epoch-awakening field of research and applications: “Nanotechnology is well recognized as a science and technology megatrend for the beginning of the 21st century. This book aims to show where nanotechnology is now - transitioning to complex systems and fundamentally new products - and communicates the societal promise of nanotechnology to specialists and the public. Most of what has already made it into the marketplace is in the form of “First Generation” products, passive nanostructures with steady behaviour. Many companies have “Second Generation” products, active nanostructures with changing behaviour during use, and embryonic “Third Generation” products, including 3-dimensional nanosystems. Concepts for “Fourth Generation” products, including heterogeneous molecular nanosystems, are only in research.”

Download or read book Fatigue Crack Propagation in Metals and Alloys written by Ulrich Krupp and published by John Wiley & Sons. This book was released on 2007-06-27 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive overview of the whole field of fatigue and fracture of metallic materials covers both the theoretical background and some of the latest experimental techniques. It provides a summary of the complex interactions between material microstructure and cracks, classifying them with respect to the overall damage process with a focus on microstructurally short cracks and dynamic embrittlement. It furthermore introduces new concepts for the numerical treatment of fatigue microcrack propagation and their implementation in fatigue-life prediction models.This comprehensive overview of the whole field of fatigue and fracture of metallic materials covers both the theoretical background and the latest experimental techniques. It provides a summary of the complex interactions between material microstructure and cracks, classifying them with respect to the overall damage process. It furthermore introduces new concepts for the numerical treatment of fatigue microcrack propagation and their implementation in fatigue-life prediction models.

Download or read book Reliability of MEMS written by Osamu Tabata and published by John Wiley & Sons. This book was released on 2008-02-04 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book to cover exclusively and in detail the principles, tools and methods for determining the reliability of microelectromechanical materials, components and devices covers both component materials as well as entire MEMS devices. Divided into two major parts, following a general introductory chapter to reliability issues, the first part looks at the mechanical properties of the materials used in MEMS, explaining in detail the necessary measuring technologies -- nanoindenters, bulge methods, bending tests, tensile tests, and others. Part Two treats the actual devices, organized by important device categories such as pressure sensors, inertial sensors, RF MEMS, and optical MEMS.

Download or read book Carbon Nanotube Devices written by and published by John Wiley & Sons. This book was released on 2008-05-05 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following on from the first AMN volume, this handy reference and textbook examines the topic of nanosystem design in further detail. It explains the physical and chemical basics behind the design and fabrication of nanodevices, covering all important, recent advances in the field, while introducing nanosystems to less experienced readers. The result is an important source for a fast, accurate overview of the state of the art of nanosystem realization, summarizing further important literature.

Download or read book Micro and Nanostructured Microfluidic Devices for Localized Protein Immobilization and Other Biomedical Applications written by Steidle, Nicole E. and published by KIT Scientific Publishing. This book was released on 2014-12-23 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new immobilization method for the localized adsorption of proteins on thermoplastic surfaces is introduced. Artificial three-phase interfaces were realized by surface structuring to control the wetting behavior which lead to a preferred adsorption in these modified areas. Additionally, different fabrication methods were analyzed to determine mass fabrication capabilities. These fabrication methods also allowed the production of fully structured microchannels to tune the fluids behavior within.

Download or read book Comprehensive Materials Finishing written by M.S.J. Hashmi and published by Elsevier. This book was released on 2016-08-29 with total page 1467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finish Manufacturing Processes are those final stage processing techniques which are deployed to bring a product to readiness for marketing and putting in service. Over recent decades a number of finish manufacturing processes have been newly developed by researchers and technologists. Many of these developments have been reported and illustrated in existing literature in a piecemeal manner or in relation only to specific applications. For the first time, Comprehensive Materials Finishing, Three Volume Set integrates a wide body of this knowledge and understanding into a single, comprehensive work. Containing a mixture of review articles, case studies and research findings resulting from R & D activities in industrial and academic domains, this reference work focuses on how some finish manufacturing processes are advantageous for a broad range of technologies. These include applicability, energy and technological costs as well as practicability of implementation. The work covers a wide range of materials such as ferrous, non-ferrous and polymeric materials. There are three main distinct types of finishing processes: Surface Treatment by which the properties of the material are modified without generally changing the physical dimensions of the surface; Finish Machining Processes by which a small layer of material is removed from the surface by various machining processes to render improved surface characteristics; and Surface Coating Processes by which the surface properties are improved by adding fine layer(s) of materials with superior surface characteristics. Each of these primary finishing processes is presented in its own volume for ease of use, making Comprehensive Materials Finishing an essential reference source for researchers and professionals at all career stages in academia and industry. Provides an interdisciplinary focus, allowing readers to become familiar with the broad range of uses for materials finishing Brings together all known research in materials finishing in a single reference for the first time Includes case studies that illustrate theory and show how it is applied in practice

Download or read book Handbook of Metal Injection Molding written by Donald F. Heaney and published by Woodhead Publishing. This book was released on 2019-05-21 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal injection molding combines the most useful characteristics of powder metallurgy and plastic injection molding to facilitate the production of small, complex-shaped metal components with outstanding mechanical properties. Handbook of Metal Injection Molding, Second Edition provides an authoritative guide to this important technology and its applications. Building upon the success of the first edition, this new edition includes the latest developments in the field and expands upon specific processing technologies. Part one discusses the fundamentals of the metal injection molding process with chapters on topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding, and sintering. Part two provides a detailed review of quality issues, including feedstock characterisation, modeling and simulation, methods to qualify a MIM process, common defects and carbon content control. Special metal injection molding processes are the focus of part three, which provides comprehensive coverage of micro components, two material/two color structures, and porous metal techniques. Finally, part four explores metal injection molding of particular materials, and has been expanded to include super alloys and precious metals. With its distinguished editor and expert team of international contributors, the Handbook of Metal Injection Molding is an essential guide for all those involved in the high-volume manufacture of small precision parts, across a wide range of high-tech industries such as microelectronics, biomedical and aerospace engineering. Provides an authoritative guide to metal injection molding and its applications Discusses the fundamentals of the metal injection molding processes and covers topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding and sintering Comprehensively examines quality issues, such as feedstock characterization, modeling and simulation, common defects and carbon content control

Download or read book LIGA and its Applications written by Volker Saile and published by John Wiley & Sons. This book was released on 2009-01-07 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering technological aspects as well as the suitability and applicability of various kinds of uses, this handbook shows optimization strategies, techniques and assembly pathways to achieve the combination of complex, even three-dimensional structures with simple manufacturing steps. The authors provide information on markets, commercialization opportunities and aspects of mass or large-scale production as well as design tools, experimental techniques, novel materials, and ideas for future improvements. Not only do they weigh up cost versus quantity, they also consider CMOS and LIGA strategies. Of interest to physicists, electronics engineers, materials scientists, institutional and industrial libraries as well as graduate students of the relevant disciplines.

Download or read book Molecularly Imprinted Sensors written by Songjun Li and published by Elsevier. This book was released on 2012-06-25 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular imprinting is a rapidly growing field with wide-ranging applications, especially in the area of sensor development, where the process leads to improved sensitivity, reliability, stability, and reproducibility in sensing materials. Molecularly Imprinted Sensors in Analytical Chemistry addresses the most recent advances and challenges relating to molecularly imprinted polymer sensors, and is the only book to compile this information in a single source. From fundamentals to applications, this material will be valuable to researchers working in sensing technologies for pharmaceutical separation and chemical analysis, environmental monitoring and protection, defense and security, and healthcare. Provides a systematic introduction to the different types of MIP-based sensors and reviews the basic principles behind each type of sensor Includes state-of-the-art methodology supported by comparisons and discussions from leading experts in the field Covers all types of sensing modes (optical, electrochemical, thermal, acoustic, etc.), materials and platforms Appeals to a multidisciplinary audience of scientists and graduate students in a wide variety of fields, including chemistry, biology, biomedical science and engineering, and materials science and engineering

Download or read book Microreactors in Preparative Chemistry written by Wladimir Reschetilowski and published by John Wiley & Sons. This book was released on 2013-09-13 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book in the field to focus on these aspects, providing extremely valuable information unavailable elsewhere for anyone seeking the practical application of microreactor technology in preparative chemistry. The topics covered branch out in three different directions. To begin with, the knowledge necessary for the preparative chemistry concerning the influence of the so-called microeffects on the reaction procedure and on mass and heat transfer as well as the surface phenomena are provided in detail. Next, practical aspects of the synthesis of various basic chemicals and fine chemicals, polymers, bioproducts and nanoparticles are discussed, including important advice for both the researcher and industrial chemist. Finally, reaction examples in microreactors whose reaction guidance are best understood are given together with universally applicable correlations as well as modeling approaches and transfer potential on related reaction systems. With its specific instructions, tips and experimental procedures for product syntheses as well as the inclusion of both the technical and theoretical background this is a must-have for beginners and experts alike working in this emerging field.