Download or read book Materials Science of Microelectromechanical Systems MEMS Devices IV written by and published by . This book was released on 2002 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microelectromechanical Systems Materials and Devices IV written by Frank W. DelRio and published by Cambridge University Press. This book was released on 2014-06-05 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symposium S, "Microelectromechanical Systems-Materials and Devices IV," held November 29-December 3 at the 2010 MRS Fall Meeting in Boston, Massachusetts, focused on micro- and nanoelectromechanical systems (MEMS/NEMS), technologies which were spawned from the fabrication and integration of small-scale mechanical, electrical, thermal, magnetic, fluidic, and optical sensors and actuators with micro-electronic components. MEMS and NEMS have enabled performance enhancements and manufacturing cost reductions in a number of applications, including optical displays, acceleration sensing, radio-frequency switching, drug delivery, chemical detection, and power generation and storage. Although originally based on silicon microelectronics, the reach of MEMS and NEMS has extended well beyond traditional engineering materials, and now includes nanomaterials (nanotubes, nanowires, nanoparticles), smart materials (piezoelectric and ferroelectric materials, shape memory alloys, pH-sensitive polymers), metamaterials, and biomaterials (ceramic, metallic, polymeric, composite based implant materials). While these new materials provide more freedom with regards to the design space of MEMS and NEMS, they also introduce a number of new fabrication and characterization challenges not previously encountered with silicon-based technology.
Download or read book Materials Science of Microelectromechanical Systems MEMS Devices IV Volume 687 written by Arturo A. Ayón and published by . This book was released on 2002-05-23 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners. This book, first published in 2002, focuses on the materials science of MEMS structures and the films involved to create those structures.
Download or read book Microelectromechanical Systems written by Committee on Advanced Materials and Fabrication Methods for Microelectromechanical Systems and published by National Academies Press. This book was released on 1997-12-15 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromenchanical systems (MEMS) is a revolutionary field that adapts for new uses a technology already optimized to accomplish a specific set of objectives. The silicon-based integrated circuits process is so highly refined it can produce millions of electrical elements on a single chip and define their critical dimensions to tolerances of 100-billionths of a meter. The MEMS revolution harnesses the integrated circuitry know-how to build working microsystems from micromechanical and microelectronic elements. MEMS is a multidisciplinary field involving challenges and opportunites for electrical, mechanical, chemical, and biomedical engineering as well as physics, biology, and chemistry. As MEMS begin to permeate more and more industrial procedures, society as a whole will be strongly affected because MEMS provide a new design technology that could rival--perhaps surpass--the societal impact of integrated circuits.
Download or read book Microelectromechanical Systems Materials and Devices IV Volume 1299 written by Frank W. DelRio and published by Cambridge University Press. This book was released on 2011-05-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symposium S, "Microelectromechanical Systems-Materials and Devices IV," held November 29-December 3 at the 2010 MRS Fall Meeting in Boston, Massachusetts, focused on micro- and nanoelectromechanical systems (MEMS/NEMS), technologies which were spawned from the fabrication and integration of small-scale mechanical, electrical, thermal, magnetic, fluidic, and optical sensors and actuators with micro-electronic components. MEMS and NEMS have enabled performance enhancements and manufacturing cost reductions in a number of applications, including optical displays, acceleration sensing, radio-frequency switching, drug delivery, chemical detection, and power generation and storage. Although originally based on silicon microelectronics, the reach of MEMS and NEMS has extended well beyond traditional engineering materials, and now includes nanomaterials (nanotubes, nanowires, nanoparticles), smart materials (piezoelectric and ferroelectric materials, shape memory alloys, pH-sensitive polymers), metamaterials, and biomaterials (ceramic, metallic, polymeric, composite based implant materials). While these new materials provide more freedom with regards to the design space of MEMS and NEMS, they also introduce a number of new fabrication and characterization challenges not previously encountered with silicon-based technology.
Download or read book Microelectromechanical Systems Materials and Devices written by David A. LaVan and published by Cambridge University Press. This book was released on 2014-06-05 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a popular series on the materials science of MEMS devices, first published in 1999. In the years since, many sophisticated devices have emerged and many aspects of MEMS materials behaviors have been characterized. However, there remain many basic questions about the relationship between process, properties and function for MEMS materials. Experimental methods have been developed, but there REMAINS a lack of standardization that would allow comparison between laboratories and commercial vendors or the creation of materials specifications that would enable greater commercialization of MEMS. The book addresses many of these issues including: RF-MEMS; optical MEMS; MEMS metrology, tribology, materials characterization and mechanical behavior; MEMS surfaces, MEMS reliability, packaging and life assessment; MEMS modeling and software tools for materials integration; biocompatibility of MEMS materials and devices; new materials and fabrication methodologies for MEMS; microfluidics and nanofluidics; in vivo drug/gene/protein delivery; novel actuators; MEMS cell-based systems; MEMS neural interfaces; MEMS sensors; and MEMS microengines and microfuel cells.
Download or read book Microelectromechanical Systems written by National Research Council and published by National Academies Press. This book was released on 1998-01-01 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromenchanical systems (MEMS) is a revolutionary field that adapts for new uses a technology already optimized to accomplish a specific set of objectives. The silicon-based integrated circuits process is so highly refined it can produce millions of electrical elements on a single chip and define their critical dimensions to tolerances of 100-billionths of a meter. The MEMS revolution harnesses the integrated circuitry know-how to build working microsystems from micromechanical and microelectronic elements. MEMS is a multidisciplinary field involving challenges and opportunites for electrical, mechanical, chemical, and biomedical engineering as well as physics, biology, and chemistry. As MEMS begin to permeate more and more industrial procedures, society as a whole will be strongly affected because MEMS provide a new design technology that could rivalâ€"perhaps surpassâ€"the societal impact of integrated circuits.
Download or read book Microelectromechanical Systems Materials and Devices III Volume 1222 written by Jörg Bagdahn and published by Cambridge University Press. This book was released on 2010-06-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing advanced materials and processes can enable the creation of microsystems (MEMS) with enhanced functionality, and improved performance and reliability. These considerations are of growing importance as MEMS make the difficult transition from research laboratories to full-fledged commercialization. Equally, MEMS designers continue to introduce new device concepts and system architectures which motivate fundamental studies of materials behavior at micrometer- and nanometer length scales. Together, this collection of papers serves as a useful resource for the growing community of scientists and engineers working at the intersection of materials science and microdevices. Firstly it focuses on developing advanced materials specific to sensing and actuation. Section Two presents fundamental studies of the mechanical behavior of microscale and nanoscale structures. Section Three presents new materials and processes that can potentially influence the development of many new and different types of MEMS.
Download or read book Microelectromechanical Systems Volume 1139 written by Srikar Vengallatore and published by Cambridge University Press. This book was released on 2014-06-05 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromechanical systems (MEMS) have transitioned from a technology niche to a role of major industrial significance. The worldwide market for MEMS is now approximately $10 billion, and the total value of systems enabled by MEMS is several orders of magnitude higher than this figure. As the market has grown, the material and process sets have broadened and departed from their semiconductor roots. In addition to engineering materials, there is now great interest in integrating multifunctional nanomaterials, smart materials and biomaterials within MEMS/NEMS to enhance functionality, performance and reliability. The opportunities created by this integration have generated a vibrant research community working on new materials and processes. This book reflects the breadth of topics currently under investigation in the field. Novel materials and accompanying processes are discussed, as are more conventional materials and processes. Consistent themes are the need for accurate material property assessment at the relevant length scales and for suitable metrology tools to support the introduction of new materials.
Download or read book Mems for Biomedical Applications written by Shekhar Bhansali and published by Elsevier. This book was released on 2012-07-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of Micro Electro Mechanical Systems (MEMS) in the biomedical field is leading to a new generation of medical devices. MEMS for biomedical applications reviews the wealth of recent research on fabrication technologies and applications of this exciting technology.The book is divided into four parts: Part one introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms. Part two describes applications of MEMS for biomedical sensing and diagnostic applications. MEMS for in vivo sensing and electrical impedance spectroscopy are investigated, along with ultrasonic transducers, and lab-on-chip devices. MEMS for tissue engineering and clinical applications are the focus of part three, which considers cell culture and tissue scaffolding devices, BioMEMS for drug delivery and minimally invasive medical procedures. Finally, part four reviews emerging biomedical applications of MEMS, from implantable neuroprobes and ocular implants to cellular microinjection and hybrid MEMS.With its distinguished editors and international team of expert contributors, MEMS for biomedical applications provides an authoritative review for scientists and manufacturers involved in the design and development of medical devices as well as clinicians using this important technology. Reviews the wealth of recent research on fabrication technologies and applications of Micro Electro Mechanical Systems (MEMS) in the biomedical field Introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms Considers MEMS for biomedical sensing and diagnostic applications, along with MEMS for in vivo sensing and electrical impedance spectroscopy
Download or read book Materials Science of Microelectromechanical Systems MEMS Devices written by and published by . This book was released on 2001 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Microelectromechanical Systems Engineering written by Nadim Maluf and published by Artech House. This book was released on 2004 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing you up-to-date with the latest developments in MEMS technology, this major revision of the best-selling An Introduction to Microelectromechanical Systems Engineering offers you a current understanding of this cutting-edge technology. You gain practical knowledge of MEMS materials, design, and manufacturing, and learn how it is being applied in industrial, optical, medical and electronic markets. The second edition features brand new sections on RF MEMS, photo MEMS, micromachining on materials other than silicon, reliability analysis, plus an expanded reference list. With an emphasis on commercialized products, this unique resource helps you determine whether your application can benefit from a MEMS solution, understand how other applications and companies have benefited from MEMS, and select and define a manufacturable MEMS process for your application. You discover how to use MEMS technology to enable new functionality, improve performance, and reduce size and cost. The book teaches you the capabilities and limitations of MEMS devices and processes, and helps you communicate the relative merits of MEMS to your company's management. From critical discussions on design operation and process fabrication of devices and systems, to a thorough explanation of MEMS packaging, this easy-to-understand book clearly explains the basics of MEMS engineering, making it an invaluable reference for your work in the field.
Download or read book Materials Science of Microelectromechanical Systems MEMS Devices written by Arthur H. Heuer and published by . This book was released on 1999 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microelectromechanical Systems and Devices written by Nazmul Islam and published by BoD – Books on Demand. This book was released on 2012-03-28 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advances of microelectromechanical systems (MEMS) and devices have been instrumental in the demonstration of new devices and applications, and even in the creation of new fields of research and development: bioMEMS, actuators, microfluidic devices, RF and optical MEMS. Experience indicates a need for MEMS book covering these materials as well as the most important process steps in bulk micro-machining and modeling. We are very pleased to present this book that contains 18 chapters, written by the experts in the field of MEMS. These chapters are groups into four broad sections of BioMEMS Devices, MEMS characterization and micromachining, RF and Optical MEMS, and MEMS based Actuators. The book starts with the emerging field of bioMEMS, including MEMS coil for retinal prostheses, DNA extraction by micro/bio-fluidics devices and acoustic biosensors. MEMS characterization, micromachining, macromodels, RF and Optical MEMS switches are discussed in next sections. The book concludes with the emphasis on MEMS based actuators.
Download or read book Materials Science of Microelectromechanical Systems MEMS Devices III written by Harold Kahn and published by Cambridge University Press. This book was released on 2014-06-05 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromechanical systems (MEMS) is a growing field with numerous potential commercial applications, including pressure and inertial sensing, optical and electrical switching, power conversion, fluidic flow control, and chemical analysis. MEMS combine mechanical and electrical (and sometimes optical, chemical, or biological) function at small scales using many of the batch fabrication techniques developed for the micro-electronics industry. Materials have been developed or adapted for MEMS applications for use as structures, actuators, and sensors. Processing techniques also have been established for integrating these materials with existing MEMS. In addition, MEMS technology has proven ideal for allowing the mechanical and tribological characterization of materials at small scales. This book, first published in 2001, addresses these issues and a variety of materials are discussed, including Si, porous Si, SiC, SiGe, diamond, electroplated Ni and Cu, as well as piezoelectric, ferroelectric, and shape memory materials, and self-assembled organic monolayers. Fabrication processes include plasma and chemical etching, Si bonding, high-aspect-ratio lithography and micromolding. In addition, the stress, fracture strength, fatigue, and friction of MEMS materials and structures are also discussed.
Download or read book Microelectromechanical Systems written by David A. LaVan and published by . This book was released on 2008 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Silicon Based MEMS Materials and Technologies written by Markku Tilli and published by Elsevier. This book was released on 2009-12-08 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to MEMS materials, technologies and manufacturing, examining the state of the art with a particular emphasis on current and future applications. Key topics covered include: Silicon as MEMS material Material properties and measurement techniques Analytical methods used in materials characterization Modeling in MEMS Measuring MEMS Micromachining technologies in MEMS Encapsulation of MEMS components Emerging process technologies, including ALD and porous silicon Written by 73 world class MEMS contributors from around the globe, this volume covers materials selection as well as the most important process steps in bulk micromachining, fulfilling the needs of device design engineers and process or development engineers working in manufacturing processes. It also provides a comprehensive reference for the industrial R&D and academic communities. Veikko Lindroos is Professor of Physical Metallurgy and Materials Science at Helsinki University of Technology, Finland. Markku Tilli is Senior Vice President of Research at Okmetic, Vantaa, Finland. Ari Lehto is Professor of Silicon Technology at Helsinki University of Technology, Finland. Teruaki Motooka is Professor at the Department of Materials Science and Engineering, Kyushu University, Japan. Provides vital packaging technologies and process knowledge for silicon direct bonding, anodic bonding, glass frit bonding, and related techniques Shows how to protect devices from the environment and decrease package size for dramatic reduction of packaging costs Discusses properties, preparation, and growth of silicon crystals and wafers Explains the many properties (mechanical, electrostatic, optical, etc), manufacturing, processing, measuring (incl. focused beam techniques), and multiscale modeling methods of MEMS structures
