Download or read book Microcrystalline Silicon Thin Films Deposited by VHF Plasmas for Solar Cell Applications written by Roger Sylvain Flückiger and published by . This book was released on 1995 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Film Silicon Solar Cells written by Arvind Shah and published by EPFL Press. This book was released on 2010-08-19 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic technology has now developed to the extent that it is close to fulfilling the vision of a "solar-energy world," as devices based on this technology are becoming efficient, low-cost and durable. This book provides a comprehensive treatment of thin-film silicon, a prevalent PV material, in terms of its semiconductor nature, starting out with the physical properties, but concentrating on device applications. A special emphasis is given to amorphous silicon and microcrystalline silicon as photovoltaic materials, along with a model that allows these systems to be physically described in the simplest manner possible, thus allowing the student or scientist/engineer entering the field of thin-film electronics to master a few basic concepts that are distinct from those in the field of conventional semiconductors. The main part of the book deals with solar cells and modules by illustrating the basic functioning of these devices, along with their limitations, design optimization, testing and fabrication methods. Among the manufacturing processes discussed are plasma-assisted and hot-wire deposition, sputtering, and structuring techniques.
Download or read book Thin Film Solar Cells written by Yoshihiro Hamakawa and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive book on thin-film solar cells, potentially a key technology for solving the energy production problem in the 21st century in an environmentally friendly way. It covers a wide range of scientific and technological aspects of thin film semiconductors - deposition technologies, growth mechanisms and the basic properties of amorphous and nano-crystalline silicon - as well as the optimum design theory and device physics of high-efficiency solar cells, especially of single-junction and multi-junction solar cells. The development of large-area solar cell modules using single and multi-junction solar cells is also considered. Examples of recent photovoltaic systems are presented and analysed.
Download or read book Silicon Based Thin Film Solar Cells written by Roberto Murri and published by Bentham Science Publishers. This book was released on 2013-03-20 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Based Thin Film Solar Cells explains concepts related to technologies for silicon (Si) based photovoltaic applications. Topics in this book focus on ‘new concept’ solar cells. These kinds of cells can make photovoltaic power production an economically viable option in comparison to the bulk crystalline semiconductor technology industry. A transition from bulk crystalline Si solar cells toward thin-film technologies reduces usage of active material and introduces new concepts based on nanotechnologies. Despite its importance, the scientific development and understanding of new solar cells is not very advanced, and educational resources for specialized engineers and scientists are required. This textbook presents the fundamental scientific aspects of Si thin films growth technology, together with a clear understanding of the properties of the material and how this is employed in new generation photovoltaic solar cells. The textbook is a valuable resource for graduate students working on their theses, young researchers and all people approaching problems and fundamental aspects of advanced photovoltaic conversion.
Download or read book Thin Film Silicon Solar Cells written by Arvind Victor Shah and published by CRC Press. This book was released on 2010-08-19 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic technology has now developed to the extent that it is close to fulfilling the vision of a "solar-energy world," as devices based on this technology are becoming efficient, low-cost and durable. This book provides a comprehensive treatment of thin-film silicon, a prevalent PV material, in terms of its semiconductor nature, startin
Download or read book VHF PECVD and Analysis of Thin Nano crystalline Silicon Films with a Multi tile Plasma Source for Solar Energy Applications written by Eamonn Monaghan and published by . This book was released on 2014 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents a characterisation of a differentially powered, multi-tile VHF capacitively coupled plasma source, MAMELUKE. The use of a differential multi-tile source imposes a spatial structure on the plasma due to the combination of capacitive and inductive power coupling. Specifically, this thesis concentrates on the PECVD of nano-crystalline silicon for applications in thin film solar manufacturing. We examine films produced by the MAMELUKE source focusing on the capability to produce uniform, high quality films over large areas with high deposition rates. The measurements of film properties are then used in combination with knowledge gained from existing works to infer information about the gas phase chemistry produced by MAMELUKE. The deposited films are characterised for silicon deposition rate; as measured by profilometry, and lm crystalline fraction; as measured by raman spectroscopy. These measurements are made as function of process parameters and, also substrate position. Films deposited in MAMELUKE are found to be crystalline in nature at deposition rates far exceeding conventional industrial processes and for areas larger than yet achieved by frequencies exceeding 100 MHz. The high deposition rates achieved are attributed to the unique gas phase chemistry achieved using VHF excitation. The spatial structure imposed by the multi-tile source is found to have an effect on both the film crystalline fraction and deposition rate, depending on the power and flow settings during deposition. When non-uniformities in the film crystalline fraction are present it is observed that the crystalline fraction at tile centres is consistently lower than the tile edges. This is attributed to a non uniformity in the gas phase chemistry, specifically the atomic hydrogen density, which is due to an un-even delivery of process gas across MAMELUKE. Capacitive coupling is seen to be dominant at tile centres and inductive coupling dominant at tile boundaries; the effect of this on plasma behaviour and thus film properties is examined. Power coupling is classified as capacitive when tile centre locations display the highest silane activation and thus deposition rate, conversely power coupling is classified as inductive when tile edges display the highest silane activation and thus deposition rate.
Download or read book Advanced Silicon Materials for Photovoltaic Applications written by Sergio Pizzini and published by John Wiley & Sons. This book was released on 2012-06-07 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, the silicon feedstock for photovoltaic cells comes from processes which were originally developed for the microelectronic industry. It covers almost 90% of the photovoltaic market, with mass production volume at least one order of magnitude larger than those devoted to microelectronics. However, it is hard to imagine that this kind of feedstock (extremely pure but heavily penalized by its high energy cost) could remain the only source of silicon for a photovoltaic market which is in continuous expansion, and which has a cumulative growth rate in excess of 30% in the last few years. Even though reports suggest that the silicon share will slowly decrease in the next twenty years, finding a way to manufacture a specific solar grade feedstock in large quantities, at a low cost while maintaining the quality needed, still remains a crucial issue. Thin film and quantum confinement-based silicon cells might be a complementary solution. Advanced Silicon Materials for Photovoltaic Applications has been designed to describe the full potentialities of silicon as a multipurpose material and covers: Physical, chemical and structural properties of silicon Production routes including the promise of low cost feedstock for PV applications Defect engineering and the role of impurities and defects Characterization techniques, and advanced analytical techniques for metallic and non-metallic impurities Thin film silicon and thin film solar cells Innovative quantum effects, and 3rd generation solar cells With contributions from internationally recognized authorities, this book gives a comprehensive analysis of the state-of-the-art of process technologies and material properties, essential for anyone interested in the application and development of photovoltaics.
Download or read book PLASMA DEPOSITED THIN FILMS written by Mort and published by Springer. This book was released on 1986-11-30 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Deposition of Amorphous Silicon Based Materials written by Pio Capezzuto and published by Elsevier. This book was released on 1995-10-10 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors made from amorphous silicon have recently become important for their commercial applications in optical and electronic devices including FAX machines, solar cells, and liquid crystal displays. Plasma Deposition of Amorphous Silicon-Based Materials is a timely, comprehensive reference book written by leading authorities in the field. This volume links the fundamental growth kinetics involving complex plasma chemistry with the resulting semiconductor film properties and the subsequent effect on the performance of the electronic devices produced. - Focuses on the plasma chemistry of amorphous silicon-based materials - Links fundamental growth kinetics with the resulting semiconductor film properties and performance of electronic devices produced - Features an international group of contributors - Provides the first comprehensive coverage of the subject, from deposition technology to materials characterization to applications and implementation in state-of-the-art devices
Download or read book Study of Microcrystalline Silicon Thin Films Deposited by Cat CVD for Thin Film Solar Cell Applications written by Yi-Peng Hsu and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Photovoltaic Silicon written by Deren Yang and published by Springer. This book was released on 2019-11-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of sun light is one of the hottest topics in sustainable energy research. To efficiently convert sun power into a reliable energy – electricity – for consumption and storage, silicon and its derivatives have been widely studied and applied in solar cell systems. This handbook covers the photovoltaics of silicon materials and devices, providing a comprehensive summary of the state of the art of photovoltaic silicon sciences and technologies. This work is divided into various areas including but not limited to fundamental principles, design methodologies, wafering techniques/fabrications, characterizations, applications, current research trends and challenges. It offers the most updated and self-explanatory reference to all levels of students and acts as a quick reference to the experts from the fields of chemistry, material science, physics, chemical engineering, electrical engineering, solar energy, etc..
Download or read book Thin Film Solar Cells written by Jef Poortmans and published by John Wiley & Sons. This book was released on 2006-10-02 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.
Download or read book A Si H Films Deposited at High Rates in a VHF Silane Plasma Potential for Low cost Solar Cells written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Characterization Techniques for Thin Film Solar Cells written by Daniel Abou-Ras and published by John Wiley & Sons. This book was released on 2016-07-13 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on advanced characterization methods for thin-film solar cells that have proven their relevance both for academic and corporate photovoltaic research and development. After an introduction to thin-film photovoltaics, highly experienced experts report on device and materials characterization methods such as electroluminescence analysis, capacitance spectroscopy, and various microscopy methods. In the final part of the book simulation techniques are presented which are used for ab-initio calculations of relevant semiconductors and for device simulations in 1D, 2D and 3D. Building on a proven concept, this new edition also covers thermography, transient optoelectronic methods, and absorption and photocurrent spectroscopy.
Download or read book Amorphous Thin Films for Solar cell Applications written by RCA Laboratories and published by . This book was released on 1979 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Energy written by Christoph Richter and published by Springer. This book was released on 2012-11-29 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering some 30 entries from the Encyclopedia of Sustainability Science and Technology, this book presents fundamental principles and technologies for sustainably harnessing solar energy. Covers photovoltaics, solar thermal energy, solar radiation and more.
Download or read book Amorphous and Microcrystalline Silicon Solar Cells Modeling Materials and Device Technology written by Ruud E.I. Schropp and published by Springer. This book was released on 2016-07-18 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amorphous silicon solar cell technology has evolved considerably since the first amorphous silicon solar cells were made at RCA Laboratories in 1974. Scien tists working in a number of laboratories worldwide have developed improved alloys based on hydrogenated amorphous silicon and microcrystalline silicon. Other scientists have developed new methods for growing these thin films while yet others have developed new photovoltaic (PV) device structures with im proved conversion efficiencies. In the last two years, several companies have constructed multi-megawatt manufacturing plants that can produce large-area, multijunction amorphous silicon PV modules. A growing number of people be lieve that thin-film photovoltaics will be integrated into buildings on a large scale in the next few decades and will be able to make a major contribution to the world's energy needs. In this book, Ruud E. I. Schropp and Miro Zeman provide an authoritative overview of the current status of thin film solar cells based on amorphous and microcrystalline silicon. They review the significant developments that have occurred during the evolution of the technology and also discuss the most im portant recent innovations in the deposition of the materials, the understanding of the physics, and the fabrication and modeling of the devices.
