Download or read book Microcomputers for Process Control written by R. C. Holland and published by Elsevier. This book was released on 2013-10-22 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microcomputers for Process Control provides an introduction to microprocessor technology for process monitoring and control. The book begins with an overview of microprocessor applications in areas such as consumer products, factories, and telecommunications. This is followed by separate chapters that discuss microcomputer technology; electrical interface to enable plant monitoring and control by microcomputer; microcomputer system hardware and software; VDU-based plant monitoring systems; and methods of computer control. This book is aimed at practicing engineers in industry who wish to acquire a base of understanding of this technology and also to learn how microcomputers can actually be applied in real plant situations. Considerable emphasis is given to plant measurements, interfacing techniques and applications of microcomputers for plant monitoring and control. No prior knowledge of microprocessor technology is assumed, but some awareness of plant measurement and control problems will assist the reader. Students undertaking engineering courses which include microelectronics or process control studies should also find the text helpful.

Download or read book Microprocessors in Process Control written by J. Borer and published by Springer Science & Business Media. This book was released on 1991-08-31 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Real Time Microcomputer Control of Industrial Processes written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of the microprocessor in computer and system engineering has motivated the development of many new concepts and has simplified the design of many modern industrial systems. During the first decade of their life. microprocessors have shown a tremendous evolution in all possible directions (technology. power. functionality. I/O handling. etc). Of course putting the microprocessors and their environmental devices into properly operating systems is a complex and difficult task requiring high skills for melding and integrating hardware. and systemic components. software This book was motivated by the editors' feeling that a cohesive reference is needed providing a good coverage of modern industrial applications of microprocessor-based real time control, together with latest advanced methodological issues. Unavoidably a single volume cannot be exhaustive. but the present book contains a sufficient number of important real-time applications. The book is divided in two sections. Section I deals with general hardware. software and systemic topics. and involves six chapters. Chapter 1. by Gupta and Toong. presents an overview of the development of microprocessors during their first twelve years of existence. Chapter 2. by Dasgupta. deals with a number of system software concepts for real time microprocessor-based systems (task scheduling. memory management. input-output aspects. programming language reqUirements.

Download or read book Microcomputer Application in Process Control written by E. Adali and published by Elsevier. This book was released on 2014-06-28 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This symposium brings together the research from different disciplines of process control, and discusses the problems encountered in the application of automation systems. The papers in this volume analyze the results of theoretical research and how far applications have been developed, new design methodologies and technologies, to give a comprehensive overview of the state of the art of this fast-developing science.

Download or read book Mini and Microcomputer Control in Industrial Processes written by M. Robert Skrokov and published by Van Nostrand Reinhold Company. This book was released on 1980 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital Computer Applications to Process Control written by R. Isermann and published by Elsevier. This book was released on 2014-05-20 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Computer Applications to Process Control presents the developments in the application of digital computers to the control of technical processes. This book discusses the control principles and includes as well direct feedback and feed forward control as monitoring and optimization of technical processes. Organized into five parts encompassing 77 chapters, this book begins with an overview of the two categories of microprocessor systems. This text then discusses the concept of a sensor controlled robot that adapts to any task, assures product quality, and eliminates machine tending labor. Other chapters consider the ergonomic adaptation of the human operator's working conditions to his abilities. This book discusses as well the self-tuning regulator for liquid level in the acetic acid evaporator and its actual performance in production. The final chapter deals with algebraic method for deadbeat control of multivariable linear time-invariant continuous systems. This book is a valuable resource for electrical and control engineers.

Download or read book Microprocessor based Process Control written by Curtis D. Johnson and published by Prentice Hall. This book was released on 1984 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital Computer Applications to Process Control written by M. Paul and published by Elsevier. This book was released on 2016-11-04 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considers the application of modern control engineering on digital computers with a view to improving productivity and product quality, easing supervision of industrial processes and reducing energy consumption and pollution. The topics covered may be divided into two main subject areas: (1) applications of digital control - in the chemical and oil industries, in water turbines, energy and power systems, robotics and manufacturing, cement, metallurgical processes, traffic control, heating and cooling; (2) systems theoretical aspects of digital control - adaptive systems, control aspects, multivariable systems, optimization and reliability, modelling and identification, real-time software and languages, distributed systems and data networks. Contains 84 papers.

Download or read book Digital Computer Process Control written by Cecil L. Smith and published by . This book was released on 1972 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Based Industrial Control 2 e written by Kant and published by PHI Learning Pvt. Ltd.. This book was released on 2011-07-30 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its second edition, this text presents the fundamentals of computer-based control of industrial processes. Intended primarily for undergraduate and postgraduate students of instrumentation and electronics engineering, the book will also be useful for professionals and researchers in these fields.

Download or read book Elements of Computer Process Control with Advanced Control Applications written by Pradeep B. Deshpande and published by . This book was released on 1981 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microcomputer Control of Thermal and Mechanical Systems written by Wilbert F. Stoecker and published by Springer. This book was released on 1989 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microcomputers are having, and will have in the future, a significant impact on the technology of all fields of engineering. The applications of micro computers of various types that are now integrated into engineering include computers and programs for calculations, word processing, and graphics. The focus of this book is on still another objective-that of control. The forms of microcomputers used in control range from small boards dedicated to control a single device to microcomputers that oversee the operation of numerous smaller computers in a building complex or an industrial plant. The most dramatic growth in control applications recently has been in the microcom puters dedicated to control functions in automobiles, appliances, production machines, farm machines, and almost all devices where intelligent decisions are profitable. Both engineering schools and individual practicing engineers have re sponded in the past several years to the dramatic growth in microcomputer control applications in thermal and mechanical systems. Universities have established courses in computer control in such departments of engineering as mechanical, civil, agricultural, chemical and others. Instructors and students in these courses see a clear role in the field that complements that of the com puter specialist who usually has an electrical engineering or computer science background. The nonEE or nonCS person should first and foremost be com petent in the mechanical or thermal system being controlled. The objectives of extending familiarity into the computer controller are (1) to learn the char acteristics, limitations, and capabilit.

Download or read book Computer Control in the Process Industries written by Brian Roffel and published by CRC Press. This book was released on 2017-07-28 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques such as dead time compensation, adaptive control and Kalman filtering have been around for some time, but as yet find little application in industry. This is due to several reasons, including: Articles in the literature usually assume that the reader is familiar with a specific topic and are therefore often difficult for the practicing control engineer to comprehend. Many practicing control engineers in the process industry have a chemical engineering background and did not receive a control engineering education. There is a wide gap between theory and practical implementation, since implementation is primarily concerned with robustness, and theory is not. The user therefore has to build an "expert shell" in order to achieve the desired robustness. Little is published on this issue, however. This book tries to promote the use of advanced control techniques by taking the reader from basic theory to practical implementation. It is therefore of interest to practicing control engineers in various types of industries, especially the process industry. Graduate and undergraduate students in control engineering will also find the book extremely useful since many practical details are given which are usually omitted in books on control engineering. Of special interest are the simulation examples, illustrating the application of various control techniques. The examples are available on a 5-1/4" floppy disk and can be used by anyone who has access to LOTUS 1-2-3. Chapter 1 is the introduction; Chapters 2 through 6 deal with distributed control system networks, computer system software, computer system selection, reliability and security, and batch and continuous control. Chapter 7 gives and introduction to advanced control. Chapters 8 through 11 deal with dead time compensation techniques and model identification. Chapters 12 through 14 discuss constraint control and design, and the adjustment and application of simple process models and optimization. Chapter 15 gives a thorough introduction to adaptive control, and the last two chapters deal with state and parameter estimation. This book is a valuable tool for everyone who realizes the importance of advanced control in achieving improved plant performance. It will take the reader from theory to practical implementation.

Download or read book Computer Aided Process Control written by S. K. Singh and published by PHI Learning Pvt. Ltd.. This book was released on 2004-08 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mini and Micro Computer Control in industrial processes written by M. Robert Skrokov and published by . This book was released on 1980 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microprocessor Based Control Systems written by N.K. Sinha and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in LSI technology and the consequent availability of inexpensive but powerful microprocessors have already affected the process control industry in a significant manner. Microprocessors are being increasingly utilized for improving the performance of control systems and making them more sophisticated as well as reliable. Many concepts of adaptive and learning control theory which were considered impractical only 20 years ago are now being implemented. With these developments there has been a steady growth in hardware and software tools to support the microprocessor in its complex tasks. With the current trend of using several microprocessors for performing the complex tasks in a modern control system, a great deal of emphasis is being given to the topic of the transfer and sharing of information between them. Thus the subject of local area networking in the industrial environment has become assumed great importance. The object of this book is to present both hardware and software concepts that are important in the development of microprocessor-based control systems. An attempt has been made to obtain a balance between theory and practice, with emphasis on practical applications. It should be useful for both practicing engineers and students who are interested in learning the practical details of the implementation of microprocessor-based control systems. As some of the related material has been published in the earlier volumes of this series, duplication has been avoided as far as possible.

Download or read book Encyclopedia of Microcomputers written by Allen Kent and published by CRC Press. This book was released on 1993-11-18 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Encyclopedia of Microcomputers serves as the ideal companion reference to the popular Encyclopedia of Computer Science and Technology. Now in its 10th year of publication, this timely reference work details the broad spectrum of microcomputer technology, including microcomputer history; explains and illustrates the use of microcomputers throughout academe, business, government, and society in general; and assesses the future impact of this rapidly changing technology."