Download or read book Microprocessor Data Book written by S. A. Money and published by Academic Press. This book was released on 2014-05-10 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microprocessor Data Book, Second Edition focuses on the available types of microprocessors and microcomputers, including description of internal architecture, instruction set, main electrical data, and package details of these instruments. The book first elaborates on 4-bit and 8-bit microprocessors and microcomputers. Discussions focus on Advanced Micro Devices Am2900 series, Hitachi HMCS40 series, Motorola MC6801 and MC6803, Motorola MC6809 series, Rockwell R6500/1 series, and RCA 1800 series. The text then examines 16-bit and 32-bit microprocessors and microcomputers. Topics include Intel 80286 microprocessor, Motorola 68010, Texas Instruments TMS9980, Zilog Z8000 series, Motorola 68020 processor, and National 32032. The manuscript takes a look at other support devices, peripheral device controllers, and serial I/O devices, including Motorola MC6850 ACIA, Texas Instruments TMS9902 ACC, Thomson EFCIS EF9365/6, and floppy disk controllers. The publication is a valuable source of information for computer science experts and researchers interested in microprocessors and microcomputers.
Download or read book Using Microcomputers in Research written by Thomas W. Madron and published by SAGE Publications, Incorporated. This book was released on 1985-05-01 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using Microcomputers in Research may be used in conjunction with the earlier Microcomputer Methods for Social Scientists (QASS 40) -- together they provide a lucid and comprehensive introduction to microcomputing in the social sciences. This book is organized around the research process, taking the reader through the processes of writing the research proposal, gathering data, analysing and manipulating data, and writing the research report.
Download or read book Digital Design for Computer Data Acquisition written by Charles D. Spencer and published by Cambridge University Press. This book was released on 1990-06-29 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This digital electronics text focuses on "how to" design, build, operate and adapt data acquisition systems. The material begins with basic logic gates and ends with a 40 KHz voltage measurer. The approach aims to cover a minimal number of topics in detail. The data acquisition circuits described communicate with a host computer through parallel I/O ports. The fundamental idea of the book is that parallel I/O ports (available for all popular computers) offer a superior balance of simplicity, low cost, speed, flexibility and adaptability. All circuits and software are thoroughly tested. Construction details and troubleshooting guidelines are included. This book is intended to serve people who teach or study one of the following: digital electronics, circuit design, software that interacts outside hardware, the process of computer based acquisition, and the design, adaptation, construction and testing of measurement systems.
Download or read book Microcomputer Design and Applications written by Samuel C. Lee and published by . This book was released on 1977 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microcomputer Design and Applications.
Download or read book Microcomputer Algorithms written by John Killingbeck and published by CRC Press. This book was released on 2020-11-25 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the computing facilities available to scientists are becoming more powerful, the problems they are addressing are increasingly complex. The mathematical methods for simplifying the computing procedures are therefore as important as ever. Microcomputer Algorithms: Action from Algebra stresses the mathematical basis behind the use of many algorithms of computational mathematics, providing detailed descriptions on how to generate algorithms for a large number of different uses. Covering a wide range of mathematical and physical applications, the book contains the theory of 25 algorithms. The mathematical theory for each algorithm is described in detail prior to discussing the algorithm in full, with complete program listings. The book presents the algorithms in modular form, allowing for easy interpretation, for the adaptation to readers' specific requirements without difficulty, and for use with various microcomputers. Blending mathematics and programming in one volume, this book will be of broad interest to all scientists and engineers, particularly those physicists using microcomputers for scientific problem handling. Students handling numerical data for research projects will also find the book useful.
Download or read book The Z 80 Microcomputer Handbook written by William T. Barden and published by Sams Technical Publishing. This book was released on 1978 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Familiarizes Microcomputer User with Z-80 Hardware & Software. Includes Instruction for "Computers on a Chip"
Download or read book Microcomputer Applications written by Robert T. Grauer and published by . This book was released on 1988-12 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microcomputers and Microprocessors written by John E. Uffenbeck and published by . This book was released on 1991 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to microprocessors, updated to cover recent models. Designed as a first course in microcomputers, this new edition covers the hardware and machine language software of the 8080/8085 and Z-80 8-bit microprocessors. It explores various aspects of microcomputer technology using examples of 8080/8085 and Z-80 applications.
Download or read book Microcomputer D A T A Book written by Derivation and Tabulation Associates, inc and published by . This book was released on 1980 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microcomputer written by K. L. Bowles and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed both for introductory courses in computer problem solving, at the freshman and sophomore college level, and for individual self study. An earlier version of the book has been used seven times for teaching large introductory classes at University of California San Diego (UCSD). This preface is intended for the instructor, or for anyone sophisticated enough in contemporary computing practice to be able to advise the prospective student. The amount of material presented has been completed by about 55 percent of all students taking the course, where UCSD schedules 10 weeks of classes in a quarter. We have taught the course using Keller's Personalized System of Instruction (PSI), though the organization of the book does not require that plan to be used. PSI methods allow slightly more material to be absorbed by the students than is the case with the traditional lecture/recitation presentation. PSI allows grading according to the number of chapter units completed. Virtually all students who pass the course at UCSD do complete the first ten essential chapters and the Exercises associated with them. For a conventional presentation under the semester system, the 15 chapters should present an appropriate amount of material. For a conventional course under the quarter system, one might not expect to complete more than the first 12 chapters except on an extra credit basis.
Download or read book Microcontrollers and Microcomputers written by Fredrick M. Cady and published by . This book was released on 2010 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microcontrollers and Microcomputers: Principles of Software and Hardware Engineering, Second Edition, is an ideal introductory text for an embedded system or microcontroller course. While most texts discuss only one specific microcontroller, this book offers a unique approach by covering the common ground among all microcontrollers in one volume. Since the text does not focus on a particular processor, it can be used with processor-specific material--such as manufacturer's data sheets and reference manuals--or with texts, including author Fredrick M. Cady's Software and Hardware Engineering: Motorola M68HC11 or Software and Hardware Engineering: Motorola M68HC12. Now fully updated, the second edition covers the fundamental operation of standard microcontroller features, including parallel and serial I/O interfaces, interrupts, analog-to-digital conversion, and timers, focusing on the electrical interfaces as needed. It devotes one chapter to showing how a variety of devices can be used, and emphasizes C program software development, design, and debugging.
Download or read book How to Build Your Own Working Microcomputer written by Charles K. Adams and published by . This book was released on 1980 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows how to assemble a microcomputer from semi-conductor chips and expand this system by adding a cassette recorder, more displays, or increased memory capacity.
Download or read book Microprocessor Data Book written by P. Hogenboom and published by . This book was released on 1988-01-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Digital Logic and Microcomputer Design written by M. Rafiquzzaman and published by John Wiley & Sons. This book was released on 2005-07-08 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Digital Logic and Microcomputer Design, haslong been hailed for its clear and simple presentation of theprinciples and basic tools required to design typical digitalsystems such as microcomputers. In this Fifth Edition, the authorfocuses on computer design at three levels: the device level, thelogic level, and the system level. Basic topics are covered, suchas number systems and Boolean algebra, combinational and sequentiallogic design, as well as more advanced subjects such as assemblylanguage programming and microprocessor-based system design.Numerous examples are provided throughout the text. Coverage includes: Digital circuits at the gate and flip-flop levels Analysis and design of combinational and sequentialcircuits Microcomputer organization, architecture, and programmingconcepts Design of computer instruction sets, CPU, memory, and I/O System design features associated with popular microprocessorsfrom Intel and Motorola Future plans in microprocessor development An instructor's manual, available upon request Additionally, the accompanying CD-ROM, contains step-by-stepprocedures for installing and using Altera Quartus II software,MASM 6.11 (8086), and 68asmsim (68000), provides valuablesimulation results via screen shots. Fundamentals of Digital Logic and Microcomputer Design is anessential reference that will provide you with the fundamentaltools you need to design typical digital systems.
Download or read book The Soul of A New Machine written by Tracy Kidder and published by Back Bay Books. This book was released on 2011-08-23 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tracy Kidder's "riveting" (Washington Post) story of one company's efforts to bring a new microcomputer to market won both the Pulitzer Prize and the National Book Award and has become essential reading for understanding the history of the American tech industry. Computers have changed since 1981, when The Soul of a New Machine first examined the culture of the computer revolution. What has not changed is the feverish pace of the high-tech industry, the go-for-broke approach to business that has caused so many computer companies to win big (or go belly up), and the cult of pursuing mind-bending technological innovations. The Soul of a New Machine is an essential chapter in the history of the machine that revolutionized the world in the twentieth century. "Fascinating...A surprisingly gripping account of people at work." --Wall Street Journal
Download or read book Microcomputer Control of Telescopes written by Mark Trueblood and published by . This book was released on 1985 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 68000 Microcomputer Systems written by Alan D. Wilcox and published by Prentice Hall. This book was released on 1987 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed handbook that emphasizes modular hardware design, project planning and scheduling. Filled with data sheets, diagrams nad helpful illustrations, this title is one more of a long line of bestselling Prentice-Hall 68000 family titles.
