Download or read book Metrology at the Frontiers of Physics and Technology written by L. Crovini and published by Elsevier. This book was released on 1992-10-22 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: The spectroscopy of trapped ions or laser-cooled atoms offers the prospect of visible frequency standards to match or even exceed the accuracy of the caesium standard. The development of satellite methods for time comparisons has improved by more than an order of magnitude the accuracy with which national laboratories can routinely compare their clocks. Mechanical metrology has not been left behind. Driven by the need to improve manufacturing technology, major advances have taken place in computer control machining and mechanical measuring systems. These, and many other fascinating developments in the field of metrology are presented in this book.
Download or read book Recent Advances in Metrology and Fundamental Constants written by Terry J. Quinn and published by IOS Press. This book was released on 2001 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade of the 20th century, many improvements took place in the field of metrology and fundamental constants. These developments and improvements are discussed in this book. The old caesium SI second definition has found a new realization with the fountain approach, replacing the classical thermal atomic beam. The use of cold atom techniques, slowed down and cooled, has opened a number of unexpected avenues for metrology and fundamental constants, one of these possibilities being the atom interferometry. Another development was the demonstration of the possiblility of performing a direct frequency division in the visible, using short femtosecond pulses. Many other developments are also discussed.
Download or read book Metrology and Physical Constants written by A. Di Giuseppe and published by IOS Press. This book was released on 2013-10-21 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reliability and accuracy of systems of measurement continue to advance. We are about to enter a period of the most stable measurement system we can imagine with the anticipated new definitions of the SI units of measurement; a direct link between fundamental physics and metrology which will eliminate the current definition of the kilogram, until now based upon an artifact. This book presents selected papers from Course 185 of the Enrico Fermi International School of Physics, held in Varenna, Italy, in July 2012 and jointly organized with the Bureau International des Poids et Mesures (BIPM). The papers delivered at the school covered some of the most advanced topics in the discipline of metrology, including nano-technologies; quantum information and quantum devices; biology and medicine; food; surface quality; ionising radiation for health, environment, art and archaeology; and climate. The continuous and striking advances in basic research concerning atomic frequency standards operating both in the visible range and at microwave levels and the applications to satellite systems are also considered, in the framework of a historical review of the international organization of metrology, as are the problems inherent in uncertainty statements and definitions. This book will be of interest to all those whose work involves scientific measurement at the highest levels of accuracy.
Download or read book Measurement Errors and Uncertainties written by Semyon G. Rabinovich and published by Springer Science & Business Media. This book was released on 2006-12-26 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical reference on theory and methods of estimating measurement errors and uncertainty for both scientists and engineers in industry and experimental research. Building on the fundamentals of measurement theory, this book offers a wealth of practial recommendations and procedures. It differs from the majority of books in that it balances coverage of probabilistic methods with detailed information on the characterization, calibration, standardization and limitations of measuring instruments, with specific examples from both electrical and mechanical systems. In addition to a general updating to reflect current research, new material in this edition includes increased coverage of indirect measurements, with a new, simpler, more efficient method for this class of measurements.
Download or read book Evaluating the Measurement Uncertainty written by I Lira and published by CRC Press. This book was released on 2002-04-09 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is now widely recognized that measurement data should be properly analyzed to include an assessment of their associated uncertainty. Since this parameter allows for a meaningful comparison of the measurement results and for an evaluation of their reliability, its expression is important not only in the specialized field of scientific metrology, but also in industry, trade, and commerce. General rules for evaluating and expressing the uncertainty are given in the internationally accepted ISO Guide to the Expression of Uncertainty in Measurement, generally known as the GUM. Evaluating the Measurement Uncertainty details the theoretical framework on which the GUM is based and provides additional material on more advanced topics such as least-squares adjustment and Bayesian statistics. The book does not require previous knowledge other than elementary calculus and can be read as a complement to the GUM or as a stand-alone reference source. It stresses fundamental principles and illustrates their applications through numerous examples taken from many different fields of metrology. The book includes practical guidance as well as theoretical aspects, resulting in an invaluable resource for metrologists, engineers, physicists, and graduate students involved with measurements in academia and industry.
Download or read book Applied Superconductivity written by Paul Seidel and published by John Wiley & Sons. This book was released on 2015-01-22 with total page 1336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This wide-ranging presentation of applied superconductivity, from fundamentals and materials right up to the details of many applications, is an essential reference for physicists and engineers in academic research as well as in industry. Readers looking for a comprehensive overview on basic effects related to superconductivity and superconducting materials will expand their knowledge and understanding of both low and high Tc superconductors with respect to their application. Technology, preparation and characterization are covered for bulk, single crystals, thins fi lms as well as electronic devices, wires and tapes. The main benefit of this work lies in its broad coverage of significant applications in magnets, power engineering, electronics, sensors and quantum metrology. The reader will find information on superconducting magnets for diverse applications like particle physics, fusion research, medicine, and biomagnetism as well as materials processing. SQUIDs and their usage in medicine or geophysics are thoroughly covered, as are superconducting radiation and particle detectors, aspects on superconductor digital electronics, leading readers to quantum computing and new devices.
Download or read book Models and Phenomenology for Conventional and High temperature Superconductivity written by Giuseppe Iadonisi and published by IOS Press. This book was released on 1998 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: The search for microscopic models to explain the many superconducting substances has introduced seminal concepts and techniques in many-body physics and in statistical mechanics. The complexity of the high-temperature superconductors has required a remarkable refinement of experimental techniques in order to allow a reliable characterization of the samples, and is partly the reason why so many different microscopic models have so far been proposed. This Enrico Fermi Course on Superconductivity was provided an up-to date presentation of selected experimental and theoretical theories on the (so called) conventional superconductivity and on the high temperature superconductivity. The attention was focused on those reliable measurements which are expected to provide the theory with key constraints, viz: Raman and Infrared Spectroscopy, Nuclear Spin Resonance, Angular Resolved Photoemission Spectroscopy, transport measurements, Josephson effect. The lectures devoted to the overview of the BCS theory and to the discussion of minimal models and of the crossover from BCS to Bose-Einstein condensation may be particularly useful. The remaining part of the program was shared between phonon and non-phonon based mechanisms. On the one hand, special emphasis has been devoted to the breakdown of the Migdal theorem and to polaronic theories. On the other, the book contains an overview of strongly correlated electron theories, including magnetic interactions. A survey of the physics of vortices completes the theoretical part of the lectures.
Download or read book Measurements of Neutrino Mass written by Fernando Ferroni and published by IOS Press. This book was released on 2009 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This volume offers a valuable insight into various aspects of the ongoing work directed at measuring neutrino mass. It took twenty years to refute the assertions of Bethe and Peierls that neutrinos were not observable, but it has since been realised that much can be learnt from these particles. The moral is, as Fiorini argues here, that the study of neutrinos was and remains demanding but rewarding. Subjects addressed in this volume include: clarifying the meaning of the Klapdor-Kleingrothaus results, probing the Majorana nature of neutrinos, observing lepton number violating effects for the first time, studying the end point of the spectrum in the search for neutrino masses and speculating whether it is possible to measure neutrino masses in cosmology. Lectures are enriched with rich historical overviews and valuable introductory material. Attention is also given to theoretical topics such as the evolution of the concept of mass in particle physics, a status report on neutrino oscillations and current discussion on neutrino masses. The reader is further reminded that neutrino masses may also have some bearing on the very origin of the matter among us, and have many deep links with other important lines of current physics research." --Book Jacket.
Download or read book New Frontiers for Metrology From Biology and Chemistry to Quantum and Data Science written by M.J.T. Milton and published by IOS Press. This book was released on 2021-12-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of standard and reliable measurements is essential in many areas of life, but nowhere is it of more crucial importance than in the world of science, and physics in particular. This book contains 20 contributions presented as part of Course 206 of the International School of Physics Enrico Fermi on New Frontiers for Metrology: From Biology and Chemistry to Quantum and Data Science, held in Varenna, Italy, from 4 -13 July 2019. The Course was the 7th in the Enrico Fermi series devoted to metrology, and followed a milestone in the history of measurement: the adoption of new definitions for the base units of the SI. During the Course, participants reviewed the decision and discussed how the new foundation for metrology is opening new possibilities for physics, with several of the lecturers reflecting on the implications for an easier exploration of the unification of quantum mechanics and gravity. A wide range of other topics were covered, from measuring color and appearance to atomic weights and radiation, and including the application of metrological principles to the management and interpretation of very large sets of scientific data and the application of metrology to biology. The book also contains a selection of posters from the best of those presented by students at the Course. Offering a fascinating exploration of the latest thinking on the subject of metrology, this book will be of interest to researchers and practitioners from many fields.
Download or read book Quantum Chaos written by G. Casati and published by Elsevier. This book was released on 2015-08-11 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of quantum systems which are chaotic in the classical limit (quantum chaos or quantum chaology) is a very new field of research. Not long ago, it was still considered as an esoteric subject, however this attitude changed radically when it was realized that this subject is relevant to many of the more mature branches of physics. This book presents the accumulated knowledge available up until now and at the same time introduces topics which are being intensively studied at present. Their relevance to other fields such as condensed matter, atomic and nuclear physics is also discussed. The lectures have been divided into two rough categories - background and advanced lectures.
Download or read book Journal of Research of the National Institute of Standards and Technology written by and published by . This book was released on 1995 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reports NIST research and development in the physical and engineering sciences in which the Institute is active. These include physics, chemistry, engineering, mathematics, and computer sciences. Emphasis on measurement methodology and the basic technology underlying standardization.
Download or read book Quantum Precision Measurement and Cold Atom Physics written by Jingbiao Chen and published by Frontiers Media SA. This book was released on 2022-09-23 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since the invention of the cesium atomic clock in 1955, quantum frequency standards have seen considerable development over the decades, as a representative of quantum precision measurement. The progress in frequency measurements achieved in the past allowed one to perform quantum precision measurements of other physical and technical quantities with unprecedented precision, whenever they could be traced back to a frequency measurement. Using atomic transitions as frequency reference, quantum frequency standards are far less susceptible to external perturbations, and the identity of microscopic particles allows easy replication of a quantum standard with the same frequency. With laser cooling and trapping, cold atomic ensembles eliminate Doppler shift broadening, and have become the go-to quantum reference when precision and new physics are pursued. The advancement of laser cooling and cold atom physics, in addition to novel physical matter states such as Bose-Einstein Condensation, give rise to new experimental techniques in quantum precision measurement, especially quantum frequency standards, such as cesium fountain clocks dictating the SI second, as well as optical lattice clocks and single-ion optical clocks pushing the frontier of quantum metrology. Other areas of quantum metrology, such as gravitometers and magnetometers, also benefit greatly from cold atoms. For practical applications, quantum frequency standards are usually required to be compact and portable, and thermal atoms in the form of atomic beams or vapor cells are utilized. Commercially available quantum frequency standards such as cesium beam clocks or rubidium clocks have become the cornerstone of navigation and timekeeping. Compact optical clocks based on various laser spectroscopic techniques have also been developed. As researchers strive to break through the limits of accurate quantum measurement and atomic temperature, new fields such as precise measurement, quantum computing and quantum simulation based on cold atoms are further opened up, and challenges still exist to explore new physical phenomena in the field of cold atoms. In honor of Prof. Yiqiu Wang on the occasion of his 90th birthday, the main goal of this Research Topic is to provide a platform to exhibit the recent achievements and reveal the future challenges in quantum precision measurement, as well as studies of cold atom physics with quantum metrology, closely related to the long-term scientific research areas of Prof. Yiqiu Wang. Both Original Research and Review articles are encouraged. Topics of interest to this collection include, but are not limited to: • Quantum precision measurements • Microwave atomic clocks and their applications • Optical frequency standards, laser spectroscopy, and their applications • Quantum measurement based on cold atom • Quantum computation and quantum simulation based on cold atom
Download or read book The Uncertainty of Measurements written by Shri Krishna Kimothi and published by Quality Press. This book was released on 2001-11-01 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The uncertainty of measurement results is drawing attention of managers, metrologists and customers. The accuracy of measurements affects all of us in trade, commerce, safety, health care environmental protection and more. The quality of these measurements are regulated by a variety of government agencies. Measurement also plays an important role in manufacturing and service organizations. Use this book to learn more about metrology and the need for reliable measurements. You can also learn about measurement system and quality of measurement systems, objectives and methods. Statistical techniques in metrology are also explained. Examples of measurement data and random variables, probability density functions, sampling distribution, statistical estimation degrees of freedom and regression are included. An entire chapter is devoted to measurement errors. The book goes in-depth into explaining national and international measurement systems and standards, and includes a complete chapter on calibration and measurement trace ability. Measurement Uncertainty will show how to evaluate various uncertainties in measurements using several approaches including international consensus. Calibration laboratories can look specifically at the chapter on that profession to guide them in their measurement improvements. Kimothi also looks at specific industries and their measurement capabilities and includes examples of R&R studies. A great resource for the CQE, CQT, CCT, CSSBB certification exams!
Download or read book An Assessment of Four Divisions of the Physical Measurement Laboratory at the National Institute of Standards and Technology written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-10-31 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Assessment of Four Divisions of the Physical Measurement Laboratory at the National Institute of Standards and Technology: Fiscal Year 2018 assesses the scientific and technical work performed by four divisions of the National Institute of Standards and Technology (NIST) Physical Measurement Laboratory. This publication reviews technical reports and technical program descriptions prepared by NIST staff and summarizes the findings of the authoring panel.
Download or read book Protein Folding and Drug Design written by Luis Serrano Romero and published by IOS Press. This book was released on 2007 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the great unsolved problems of science and also of physics is the prediction of the three dimensional structure of a protein from its amino acid sequence. It may be stated that the deep connection existing between physics and protein folding is not so much, or in any case not only, through physical methods, but through physical concepts.
Download or read book Physics Briefs written by and published by . This book was released on 1993 with total page 1288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Polarimetry and Ellipsometry Fundamentals and Applications written by Haofeng Hu and published by Frontiers Media SA. This book was released on 2022-10-17 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt:
