Download or read book Metrology and properties of engineering surfaces 1988 written by Ken J. Stout and published by . This book was released on 1988 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metrology and Properties of Engineering Surfaces written by E. Mainsah and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metrology and Properties of Engineering Surfaces provides in a single volume a comprehensive and authoritative treatment of the crucial topics involved in the metrology and properties of engineering surfaces. The subject matter is a central issue in manufacturing technology, since the quality and reliability of manufactured components depend greatly upon the selection and qualities of the appropriate materials as ascertained through measurement. The book can in broad terms be split into two parts; the first deals with the metrology of engineering surfaces and covers the important issues relating to the measurement and characterization of surfaces in both two and three dimensions. This covers topics such as filtering, power spectral densities, autocorrelation functions and the use of Fractals in topography. A significant proportion is dedicated to the calibration of scanning probe microscopes using the latest techniques. The remainder of the book deals with the properties of engineering surfaces and covers a wide range of topics including hardness (measurement and relevance), surface damage and the machining of brittle surfaces, the characterization of automobile cylinder bores using different techniques including artificial neural networks and the design and use of polymer bearings in microelectromechanical devices. Edited by three practitioners with a wide knowledge of the subject and the community, Metrology and Properties of Engineering Surfaces brings together leading academics and practitioners in a comprehensive and insightful treatment of the subject. The book is an essential reference work both for researchers working and teaching in the technology and for industrial users who need to be aware of current developments of the technology and new areas of application.

Download or read book Proceedings of the 10th International Conference on Metrology and Properties of Engineering Surfaces written by Tom R. Thomas and published by Université de Saint-Etienne. This book was released on 2005 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metrology and Properties of Engineering Surfaces written by United States. National Bureau of Standards. International Conference and published by . This book was released on 1988 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Journal of Research of the National Bureau of Standards written by and published by . This book was released on 1988 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Journal of Research of the National Bureau of Standards written by United States. National Bureau of Standards and published by . This book was released on 1988 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Beam Effects Surface Topography and Depth Profiling in Surface Analysis written by Alvin W. Czanderna and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many books are available that detail the basic principles of the different methods of surface characterization. On the other hand, the scientific literature provides a resource of how individual pieces of research are conducted by particular labo- tories. Between these two extremes the literature is thin but it is here that the present volume comfortably sits. Both the newcomer and the more mature scientist will find in these chapters a wealth of detail as well as advice and general guidance of the principal phenomena relevant to the study of real samples. In the analysis of samples, practical analysts have fairly simple models of how everything works. Superimposed on this ideal world is an understanding of how the parameters of the measurement method, the instrumentation, and the char- teristics of the sample distort this ideal world into something less precise, less controlled, and less understood. The guidance given in these chapters allows the scientist to understand how to obtain the most precise and understood measu- ments that are currently possible and, where there are inevitable problems, to have clear guidance as the extent of the problem and its likely behavior.

Download or read book 4M 2005 First International Conference on Multi Material Micro Manufacture written by Stefan Dimov and published by Elsevier. This book was released on 2005-12-07 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4M 2005 - First International Conference on Multi-Material Micro Manufacture

Download or read book Metrology and Properties of Engineering Surfaces written by E. Mainsah and published by . This book was released on 2001 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manufacturing Surface Technology written by Brian Griffiths and published by Elsevier. This book was released on 2001-11-01 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first title in the "Manufacturing Engineering Modular" series, the publication of this book marks recognition of the effect of surface finish obtained in manufacture ("surface integrity") on the functional performance of product, in terms of such factors as fatigue, corrosion and strength. It is a concise work, intended chiefly for undergraduate and postgraduate students, which should also provide useful material for the professional manufacturing engineer.

Download or read book Nondestructive Characterization of Materials written by Paul Höller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering structures for reliable function and safety have to be designed such that operational mechanical loads are compensated for by stresses in the components bearable by the materials used. Vhat is "bearable"? First of all it depends on the properties of the chosen materials as well as on several other parameters, e.g. temperature, corrosivity of the environment, elapsed or remaining serviceable life, unexpected deterioration of materials, whatever the source and nature of such deterioration may be: defects, loss of strength, embrittlement, wastage, etc. DEFECTS and PROPERTIES of materials currently determine loadability. Therefore in addition to nondestructive testing for defects there is also a need for nondestructive testing of properties. The third type of information to be supplied by nondestructive measurement pertains to STRESS STATES under OPERATIONAL LOADS, i.e. LOAD-INDUCED plus RESIDUAL STRESSES. Residual stresses normally cannot be calculated; they have to be measured nondestructively; well-approved elastomechanical finite element codes are available and used for calculating load-induced stresses; for redundancy and reliability, engineers, however, need procedures and instrumentation for experimental checks.

Download or read book Engineering Tribology written by John Williams and published by Cambridge University Press. This book was released on 2005-01-10 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An ideal textbook for a first tribology course and a reference for designers and researchers, Engineering Tribology gives the reader interdisciplinary understanding of tribology including materials constraints. Real design problems and solutions, such as those for journal and rolling element bearings, cams and followers, and heavily loaded gear teeth, elucidate concepts and motivate understanding. The hallmark of this work is the integration of qualitative and quantitative material from a wide variety of disciplines including physics, materials science, surface and lubricant chemistry, with traditional engineering approaches. Reviewers have praised the coverage of: both elastic and plastic stresses at surfaces in contact; the mechanisms of friction, wear and surface distress, and wear; thick pressurized fluid films in both hydrostatic and hydrodynamic bearings; elasto-hydrodynamic lubrication; boundary lubrication mechanisms; dry and marginally lubricated bearing design; the design of rolling contacts and bearings.

Download or read book Materials and Surface Engineering in Tribology written by Jamal Takadoum and published by John Wiley & Sons. This book was released on 2013-05-10 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is designed to provide a clear and comprehensive overview of tribology. The book introduces the notion of a surface in tribology where a solid surface is described from topographical, structural, mechanical, and energetic perspectives. It also describes the principal techniques used to characterize and analyze surfaces. The title then discusses what may be called the fundamentals of tribology by introducing and describing the concepts of adhesion, friction, wear, and lubrication. The book focuses on the materials used in tribology, introducing the major classes of materials used, either in their bulk states or as coatings, including both protective layers and other coatings used for decorative purposes. Of especial importance to the tribology community are sections that provide the latest information on Nanotribology, Wear, Lubrication, and Wear-Corrosion: Tribocorrosion and Erosion-Corrosion.

Download or read book Selected Papers on Optical Methods in Surface Metrology written by David J. Whitehouse and published by SPIE-International Society for Optical Engineering. This book was released on 1996 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics in this volume include: comparison of interferometric contouring techniques; comparison of visibility of standard scratches; and near-grazing illumination and shadowing of rough surfaces.

Download or read book Index of Conference Proceedings written by British Library. Document Supply Centre and published by . This book was released on 1991 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Journal of Research of the National Institute of Standards and Technology written by and published by . This book was released on 1995 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reports NIST research and development in the physical and engineering sciences in which the Institute is active. These include physics, chemistry, engineering, mathematics, and computer sciences. Emphasis on measurement methodology and the basic technology underlying standardization.

Download or read book Optical Measurement of Surface Topography written by Richard Leach and published by Springer Science & Business Media. This book was released on 2011-03-31 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: The measurement and characterisation of surface topography is crucial to modern manufacturing industry. The control of areal surface structure allows a manufacturer to radically alter the functionality of a part. Examples include structuring to effect fluidics, optics, tribology, aerodynamics and biology. To control such manufacturing methods requires measurement strategies. There is now a large range of new optical techniques on the market, or being developed in academia, that can measure areal surface topography. Each method has its strong points and limitations. The book starts with introductory chapters on optical instruments, their common language, generic features and limitations, and their calibration. Each type of modern optical instrument is described (in a common format) by an expert in the field. The book is intended for both industrial and academic scientists and engineers, and will be useful for undergraduate and postgraduate studies.