Download or read book Methyl Methacrylate from Acetone Cost Analysis MMA E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methyl Methacrylate (MMA) production from acetone, ammonia and natural gas The process examined is similar to Evonik Aveneer process. In this process, hydrogen cyanide, acetone and methanol are used as raw materials for the production of MMA. Different from the conventional acetone cyanohydrin (ACH) process, this process does not use sulfuric acid. The hydrogen cyanide used is generated from ammonia and natural gas in an on-site unit. This report was developed based essentially on the following reference(s): (1) US Patent 8569539, issued to Evonik in 2013 (2) US Patent 20120232305, issued to Evonik in 2012 (3) US Patent 20080194875, issued to Evonik in 2008 Keywords: Propanone, Hydrolysis, Transesterification, Dehydration, Prussic Acid

Download or read book Methyl Methacrylate from Acetone Cost Analysis MMA E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methyl Methacrylate (MMA) production from acetone, ammonia and natural gas. The process examined is similar to Evonik Aveneer process. In this process, hydrogen cyanide, acetone and methanol are used as raw materials for the production of MMA. Different from the conventional acetone cyanohydrin (ACH) process, this process does not use sulfuric acid. The hydrogen cyanide used is generated from ammonia and natural gas in an on-site unit. This report was developed based essentially on the following reference(s): (1) US Patent 8569539, issued to Evonik in 2013 (2) US Patent 20120232305, issued to Evonik in 2012 (3) US Patent 20080194875, issued to Evonik in 2008 Keywords: Propanone, Hydrolysis, Transesterification, Dehydration, Prussic Acid

Download or read book Methyl Methacrylate from Acetone Cost Analysis MMA E62A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methyl Methacrylate (MMA) production from acetone and hydrogen cyanide (HCN). The process examined is similar to Evonik Aveneer process. In this process, hydrogen cyanide, acetone and methanol are used as raw materials for the production of MMA. Different from the conventional acetone cyanohydrin (ACH) process, this process does not use sulfuric acid. This report was developed based essentially on the following reference(s): (1) US Patent 8569539, issued to Evonik in 2013 (2) US Patent 20120232305, issued to Evonik in 2012 (3) US Patent 20080194875, issued to Evonik in 2008 Keywords: Propanone, Hydrolysis, Transesterification, Dehydration, Prussic Acid

Download or read book Methyl Acrylate from Acrylic Acid Cost Analysis Methyl Acrylate E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methyl Acrylate production from acrylic acid and methanol The process examined is a typical esterification process. In this process, acrylic acid and methanol are esterified in a fixed-bed reactor producing Methyl Acrylate. This report was developed based essentially on the following reference(s): Keywords: Methyl Alcohol, Lower Alkyl Acrylate, Methyl Prop-2-Enoate

Download or read book Methyl Methacrylate from Isobutylene Cost Analysis MMA E31A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methyl Methacrylate (MMA) production from isobutylene using an oxidation process. The process examined is similar to Sumitomo/Nippon Shokubai process. In this process, methacrylic acid (MAA) intermediate is initially produced by two-stage catalytic oxidation of isobutene. Then, MAA is esterified with methanol to produce MMA. This report was developed based essentially on the following reference(s): (1) EP Patent 1052017, issued to Nippon Shokubai in 2012 (2) "Methacrylic Acid and Derivatives", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Isobutene, Methylpropene, Esterification, Two-Stage Oxidation, Japan Methacryl Monomer, JMM

Download or read book Methyl Methacrylate from t Butanol Cost Analysis MMA E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methyl Methacrylate (MMA) production from t-butanol and methanol. The process examined is carried out in three steps: oxidation of t-butanol to metacrolein; metacrolein oxidation to methacrylic acid; and esterification of methacrylic acid with methanol to generate the methyl methacrylate product. This report was developed based essentially on the following reference(s): Keywords: Tertiary Butyl Alcohol, Tertiary Butanol, Mitsubishi, Nippon Shokubai

Download or read book Acetone Production from Propylene Cost Analysis Acetone E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Acetone production from propylene The process examined is a typical hydration/dehydrogenation process. In this process, propylene is directly hydrated in a catalytic reactor, producing isopropanol. Then, isopropanol is dehydrogenated in the vapor phase in a fixed bed catalyst reactor to produce acetone. This report was developed based essentially on the following reference(s): Keywords: Propanone, Fixed-Bed Reactor, Catalytic Reactor, Isopropyl Alcohol, 2-Propanol

Download or read book Industrial Environmental Chemistry written by Donald T. Sawyer and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph consists of manuscripts submitted by invited speakers who participated in the symposium "Industrial Environmental Chemistry: Waste Minimization in Industrial Processes and Remediation of Hazardous Waste," held March 24-26, 1992, at Texas A&M University. This meeting was the tenth annual international symposium sponsored by the Texas A&M Industry-University Cooperative Chemistry Program (IUCCP). The program was developed by an academic-industrial steering committee consisting of the co-chairmen, Professors Donald T. Sawyer and Arthur E. Martell of the Texas A&M University Chemistry Department, and members appointed by the sponsoring companies: Bernie A. Allen, Jr., Dow Chemical USA; Kirk W. Brown, Texas A&M University; Abraham Clearfield, Texas A&M University; Greg Leyes, Monsanto Company; Jay Warner, Hoechst-Celanese Corporation; Paul M. Zakriski, BF Goodrich Company; and Emile A. Schweikert, Texas A&M University (IUCCP Coordinator). The subject of this conference reflects the interest that has developed in academic institutions and industry for technological solutions to environmental contamination by industrial wastes. Progress is most likely with strategies that minimize waste production from industrial processes. Clearly the key to the protection and preservation of the environment will be through R&D that optimizes chemical processes to minimize or eliminate waste streams. Eleven of the papers are directed to waste minimization. An additional ten papers discuss chemical and biological remediation strategies for hazardous wastes that contaminate soils, sludges, and water.

Download or read book Principles of Polymer Design and Synthesis written by Wei-Fang Su and published by Springer Science & Business Media. This book was released on 2013-10-09 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: How can a scientist or engineer synthesize and utilize polymers to solve our daily problems? This introductory text, aimed at the advanced undergraduate or graduate student, provides future scientists and engineers with the fundamental knowledge of polymer design and synthesis to achieve specific properties required in everyday applications. In the first five chapters, this book discusses the properties and characterization of polymers, since designing a polymer initially requires us to understand the effects of chemical structure on physical and chemical characteristics. Six further chapters discuss the principles of polymerization reactions including step, radical chain, ionic chain, chain copolymerization, coordination and ring opening. Finally, material is also included on how commonly known polymers are synthesized in a laboratory and a factory. This book is suitable for a one semester course in polymer chemistry and does not demand prior knowledge of polymer science.

Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. - The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications - Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction - Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more

Download or read book Dielectric Polymer Nanocomposites written by J. Keith Nelson and published by Springer Science & Business Media. This book was released on 2009-12-17 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dielectric Polymer Nanocomposites provides the first in-depth discussion of nano-dielectrics, an emerging and fast moving topic in electrical insulation. The text begins with an overview of the background, principles and promise of nanodielectrics, followed by a discussion of the processing of nanocomposites and then proceeds with special considerations of clay based processes, mechanical, thermal and electric properties and surface properties as well as erosion resistance. Carbon nanotubes are discussed as a means of creation of non linear conductivity, the text concludes with a industrial applications perspective.

Download or read book Carbon Fibers written by Soo-Jin Park and published by Springer. This book was released on 2014-10-08 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains eight chapters that discuss the manufacturing methods, surface treatment, composite interfaces, microstructure-property relationships with underlying fundamental physical and mechanical principles, and applications of carbon fibers and their composites. Recently, carbon-based materials have received much attention for their many potential applications. The carbon fibers are very strong, stiff, and lightweight, enabling the carbon materials to deliver improved performance in several applications such as aerospace, sports, automotive, wind energy, oil and gas, infrastructure, defense, and semiconductors. However, the use of carbon fibers in cost-sensitive, high-volume industrial applications is limited because of their relatively high costs. However, its production is expected to increase because of its widespread use in high-volume industrial applications; therefore, the methods used for manufacturing carbon fibers and carbon-fiber-reinforced composites and their structures and characteristics need to be investigated.

Download or read book Fine Structure of Papermaking Fibres written by European Cooperation in Science and Technology and published by . This book was released on 2011 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Polymer Engineering Third Edition written by Anil Kumar and published by CRC Press. This book was released on 2018-12-07 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring the chemistry of synthesis, mechanisms of polymerization, reaction engineering of step-growth and chain-growth polymerization, polymer characterization, thermodynamics and structural, mechanical, thermal and transport behavior of polymers as melts, solutions and solids, Fundamentals of Polymer Engineering, Third Edition covers essential concepts and breakthroughs in reactor design and polymer production and processing. It contains modern theories and real-world examples for a clear understanding of polymer function and development. This fully updated edition addresses new materials, applications, processing techniques, and interpretations of data in the field of polymer science. It discusses the conversion of biomass and coal to plastics and fuels, the use of porous polymers and membranes for water purification, and the use of polymeric membranes in fuel cells. Recent developments are brought to light in detail, and there are new sections on the improvement of barrier properties of polymers, constitutive equations for polymer melts, additive manufacturing and polymer recycling. This textbook is aimed at senior undergraduate students and first year graduate students in polymer engineering and science courses, as well as professional engineers, scientists, and chemists. Examples and problems are included at the end of each chapter for concept reinforcement.

Download or read book Introduction to Composite Materials Design Second Edition written by Ever J. Barbero and published by CRC Press. This book was released on 2010-07-07 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a wealth of completely revised examples and new information, Introduction to Composite Materials Design, Second Edition greatly improves on the bestselling first edition. It incorporates state-of-the-art advances in knowledge and design methods that have taken place over the last 10 years, yet maintains the distinguishing features and vital content of the original. New material in this second edition: Introduces new background topics, including design for reliability and fracture mechanics Revises and updates information on polymer matrices, modern fibers (e.g., carbon nanotubes, Basalt, Vectran) and fiber forms such as textiles/fabrics Includes new information on Vacuum Assisted Resin Transfer Molding (VARTM) Incorporates major advances in prediction of unidirectional-lamina properties Reworks sections on material failure, including the most advanced prediction and design methodologies, such as in situ strength and Mohr-Coulomb criterion, etc. Covers all aspects of preliminary design, relegating finite element analysis to a separate textbook Discusses methodology used to perform damage mechanics analysis of laminated composites accounting for the main damage modes: longitudinal tension, longitudinal compression, transverse tension, in-plane shear, and transverse compression Presents in-depth analysis of composites reinforced with plain, twill, and satin weaves, as well as with random fiber reinforcements Expands the analysis of thin walled beams with newly developed examples and MATLAB® code Addresses external strengthening of reinforced-concrete beams, columns, and structural members subjected to both axial and bending loads The author distributes 78 fully developed examples throughout the book to illustrate the application of presented analysis techniques and design methodology, making this textbook ideally suited for self-study. Requiring no more than senior undergraduate-level understanding of math and mechanics, it remains an invaluable tool for students in the engineering disciplines, as well as for self-studying, practicing engineers.

Download or read book Fire Properties of Polymer Composite Materials written by A. P. Mouritz and published by Springer Science & Business Media. This book was released on 2007-01-30 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first to deal with the important topic of the fire behaviour of fibre reinforced polymer composite materials. The book covers all of the key issues on the behaviour of composites in a fire. Also covered are fire protection materials for composites, fire properties of nanocomposites, fire safety regulations and standards, fire test methods, and health hazards from burning composites.

Download or read book Fundamentals of Composites Manufacturing Second Edition written by A. Brent Strong and published by Society of Manufacturing Engineers. This book was released on 2008 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes advances, key information, case studies, and examples that can broaden your knowledge of composites materials and manufacturing methods. This text deals with composites manufacturing methods, providing tips for getting the best results that weigh the required material properties against cost and production efficiency. An Instructor's Guide is also available.