Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques
Download or read book Building Adaptation written by James Douglas and published by Routledge. This book was released on 2006-08-11 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: As existing buildings age, nearly half of all construction activity in Britain is related to maintenance, refurbishment and conversions. Building adaptation is an activity that continues to make a significant contribution to the workload of the construction industry. Given its importance to sustainable construction, the proportion of adaptation works in relation to new build is likely to remain substantial for the foreseeable future, especially in the developed parts of the world. Building Adaptation, Second Edition is intended as a primer on the physical changes that can affect older properties. It demonstrates the general principles, techniques, and processes needed when existing buildings must undergo alteration, conversion, extension, improvement, or refurbishment. The publication of the first edition of Building Adaptation reflected the upsurge in refurbishment work. The book quickly established itself as one of the core texts for building surveying students and others on undergraduate and postgraduate built environment courses. This new edition continues to provide a comprehensive introduction to all the key issues relating to the adaptation of buildings. It deals with any work to a building over and above maintenance to change its capacity, function or performance.
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book Water Transmission and Distribution written by American Water Works Association and published by American Water Works Association. This book was released on 2003 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water distribution systems are made up of pipe, valves and pumps through which treated water is moved from the treament plant to homes, offices, industries, and other consumers. The types of materials and equipment used by each water system are usually governed by local conditions, past practices, and economics. Consequently, drinking water professionals must be knowledgeable about common types of equipment and operating methods that are available. Completely revised and updated, Water transmission and distribution includes information on the following: distribution system design and operation and maintenance ; piping materials ; valves, pumps, and water meters ; water main installation ; backfilling, main testing, and installation safety ; fire hyfrants ; water storage ; water services ; cross-connection control ; motors and engines ; instrumentation and control ; information management and public relations.--Cover page [4].
Download or read book Thermoplastics Pipes Universal Wall Thickness Table written by British Standards Institute Staff and published by . This book was released on 1997-05 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipes, Thermoplastic polymers, Polymers, Thickness, Thickness measurement, Circular shape, Dimensions, Diameter, Diameter measurement
Download or read book Additives for Plastics Handbook written by J. Murphy and published by Elsevier. This book was released on 2001-11-22 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both technically and economically, additives form a large and increasingly significant part of the polymer industry, both plastics and elastomers. Since the first edition of this book was published, there have been wide-ranging developments, covering chemistry and formulation of new and more efficient additive systems and the safer use of additives, both by processors in the factory and, in the wider field, as they affect the general public. This new edition follows the successful formula of its predecessor, it provides a comprehensive view of all types of additives, concentrating mainly on their technical aspects (chemistry/formulation, structure, function, main applications) with notes on the commercial background of each. The field has been expanded to include any substance that is added to a polymer to improve its use, so including reinforcing materials (such as glass fibre), carbon black and titanium dioxide. This is a book which has been planned for ease of use and the information is presented in a way which is appropriate to the users' needs.
Download or read book Unplasticized PVC UPVC Pipes and Fittings for Pressure Applications written by and published by . This book was released on 1990 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Characterization written by Nicholas P. Cheremisinoff and published by Univ. Press of Mississippi. This book was released on 1996-12-31 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an overview of polymer characterization test methods. The methods and instrumentation described represent modern analytical techniques useful to researchers, product development specialists, and quality control experts in polymer synthesis and manufacturing. Engineers, polymer scientists and technicians will find this volume useful in selecting approaches and techniques applicable to characterizing molecular, compositional, rheological, and thermodynamic properties of elastomers and plastics.
Download or read book Pressure Vessel Handbook written by Eugene F. Megyesy and published by . This book was released on 1977 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Plastic Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: An outstanding and thorough presentation of the complete field of plastics processing Handbook of Plastic Processes is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given product while enabling users to better understand the performance characteristics of each process. The authors, all experts in their fields, explain in clear, concise, and practical terms the advantages, uses, and limitations of each process, as well as the most modern and up-to-date technologies available in their application. Coverage includes chapters on: Injection molding Compression and transfer molding Sheet extrusion Blow molding Calendering Foam processing Reinforced plastics processing Liquid resin processing Rotational molding Thermoforming Reaction injection molding Compounding, mixing, and blending Machining and mechanical fabrication Assembly, finishing, and decorating Each chapter details a particular process, its variations, the equipment used, the range of materials utilized in the process, and its advantages and limitations. Because of its increasing impact on the industry, the editor has also added a chapter on nanotechnology in plastics processing.
Download or read book Handbook of PVC Pipe Design and Construction written by Uni-Bell PVC Pipe Association and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Most Thorough and Far-reaching Revision Yet! The new 5th edition of the Handbook of PVC Pipe Design and Construction is the most comprehensive and up-to-date reference on PVC pipe and fittings. It provides practical engineering and construction information. It includes recommendations applicable to the design and use of primarily underground PVC piping systems in both pressure and non-pressure applications. Previous editions have been used by engineers all across North America and around the globe in the utility and consulting engineering sectors, as well as in universities and technical institutions. New to the Fifth Edition Four new chapters PVC Pressure Pipe Installation PVC Non-Pressure Pipe Installation Trenchless Installation of PVC Pipe Molecularly Oriented Polyvinyl Chloride Pipe (PVCO) Updated and improved graphs and tables More open page format The collaborative result of thousands of hours of research and review, the contents of the 5th edition are numerically formatted by section and subsection, as well as by figure and table designation. This allows easy reference and quick access. The Handbook of PVC Pipe Design and Construction is a must-have reference for design engineers, public and private pipe utility managers, and students. A more complete text on PVC pipe is not available.
Download or read book Materials Handbook written by François Cardarelli and published by Springer Science & Business Media. This book was released on 2008-03-19 with total page 1365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique and practical book provides quick and easy access to data on the physical and chemical properties of all classes of materials. The second edition has been much expanded to include whole new families of materials while many of the existing families are broadened and refined with new material and up-to-date information. Particular emphasis is placed on the properties of common industrial materials in each class. Detailed appendices provide additional information, and careful indexing and a tabular format make the data quickly accessible. This book is an essential tool for any practitioner or academic working in materials or in engineering.
Download or read book A Dictionary of Construction Surveying and Civil Engineering written by Christopher Gorse and published by OUP Oxford. This book was released on 2012-02-23 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This A to Z is the most up-to-date dictionary of building, surveying, and civil engineering terms and definitions available. Written by an experienced team of experts in the respective fields, it covers in over 7,500 entries the key areas of construction technology and practice, civil and construction engineering, construction management techniques and processes, and legal aspects such as contracts and procurement. Illustrations complement entries where necessary and other extra features include entry-level web links, which are listed and regularly updated on a companion website. Its wide coverage makes it the ideal reference for students of construction and related areas, as well as for professionals in the field.
Download or read book Manufacturing Processes for Design Professionals written by Rob Thompson and published by Thames & Hudson. This book was released on 2007-11-30 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: An encyclopaedic guide to production techniques and materials for product and industrial designers, engineers, and architects. Today's product designers are presented with a myriad of choices when creating their work and preparing it for manufacture. They have to be knowledgeable about a vast repertoire of processes, ranging from what used to be known as traditional "crafts" to the latest technology, to enable their designs to be manufactured effectively and efficiently. Information on the internet about such processes is often unreliable, and search engines do not usefully organize material for designers. This fundamental new resource explores innovative production techniques and materials that are having an impact on the design industry worldwide. Organized into four easily referenced parts—Forming, Cutting, Joining, and Finishing—over seventy manufacturing processes are explained in depth with full technical descriptions; analyses of the typical applications, design opportunities, and considerations each process offers; and information on cost, speed, and environmental impact. The accompanying step-by-step case studies look at a product or component being manufactured at a leading international supplier. A directory of more than fifty materials includes a detailed technical profile, images of typical applications and finishes, and an overview of each material's design characteristics. With some 1,200 color photographs and technical illustrations, specially commissioned for this book, this is the definitive reference for product designers, 3D designers, engineers, and architects who need a convenient, highly accessible, and practical reference.
Download or read book Polymer Technology Dictionary written by A. Whelan and published by Springer. This book was released on 2012-10-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive encyclopaedic dictionary on polymer technology with expanded entries - trade name and trade marks, list of abbreviations and property tables.
Download or read book The Rehabilitation and Maintenance of Drains and Sewers written by Dietrich Stein and published by Wiley-VCH. This book was released on 2001-09-19 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the shortened, English-language version of the German volume published in 1989 and omits those contributions and passages that refer only to German laws, or which have little relevance outside Germany. It includes additional texts, especially on the relevant European norms and the canon of the Abwassertechnische Vereinigung [German Waste Water Technology Association] as well as the latest research and development reports. The result is a comprehensive overview of the technology currently available for wastewater management and systems plus the relevant norms, with special emphasis on maintenance, cleaning, inspection and reconstruction. A number of European systems are used to describe in detail pipe materials and connections, pipework-specific framework conditions and their changes since the development of modern drains and sewers in the 19th century. The book also lists causes and effects of various types of damage, and their assessment in terms of hydraulics, environmental relevance and construction, since this is a basic prerequisite for the choice of suitable rehabilitation measures and their implementation. Readers are thus not only provided with a comprehensive presentation of all internationally practised rehabilitation processes and their fields of application, but are also given advice on their selection, on the formulation of tenders, cost and cost efficiency.
Download or read book Service Life Prediction written by Service Life Prediction Symposium and published by . This book was released on 2005 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt:
