Download or read book Reducing Agents in Colloidal Nanoparticle Synthesis written by Stefanos Mourdikoudis and published by Royal Society of Chemistry. This book was released on 2021-05-17 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will highlight the role of reducing agents in the chemical synthesis of nanoparticle systems.
Download or read book Methods of Synthesis of Colloidal Nanoparticles written by Jeffrey A. Gerbec and published by . This book was released on 2006 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal semiconductor nanocrystals, with unique size-dependent optical properties, have great promise for integration into next generation technologies including solid-state lighting and biological labeling. A general method of reproducible, large scale and environmentally safe synthetic preparation becomes crucial for integration in commercial devices. In addition to the synthetic protocol, an understanding of the surfaces of the as prepared material is critical for obtaining a high quantum yield that is stable for long periods of time in ambient conditions. In this dissertation, a new synthetic approach to general colloidal nanocrystals is presented. Microwave heating of molecular precursors increases the rate of reaction from days to minutes for a host of nanomaterials. The most relevant for the study of inorganic phosphors is CdSe and InP and their respective ternary analogs. Post synthetic surface treatment of the as prepared material show a tremendous increase in the QY for as prepared InP and InGaP. Post synthetic surface treatment is carried out by photoactivated etching with dilute HF. In the case of InGaP, the QY reaches 0.80 from 0.05 in a matter of minutes. Other surface treatment strategies that address the stability is carried out by forming epitaxial core shell structures. It is shown that using ZnS as a wide band gap shelling material, the QY of InP reaches 0.42 in solution and is stable for months. These are significant steps toward the engineering of semiconductor quantum dot phosphors for solid state lighting and biological labeling.
Download or read book Colloidal Nanoparticles written by Nikhil R Jana and published by CRC Press. This book was released on 2019-03-26 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will focus on synthesis, coating and functionalization chemistry of selected nanoparticles that are most commonly used in various biomedical applications. Apart from standard selected chemical synthetic methods, it focusses on design consideration of functionalization, selected coating chemistry for transforming as synthesized nanoparticle, selected conjugation chemistries and purification approach for such nanoparticles. It also includes state-of-art/future prospect of nanodrugs suitable for clinical applications. There will material on general application potential of these nanoparticles, importance of functionalization and common problems faced by non-chemists.
Download or read book Reducing Agents in Colloidal Nanoparticle Synthesis written by Stefanos Mourdikoudis and published by Royal Society of Chemistry. This book was released on 2021-05-14 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoparticles can be synthesised via a number of methods, including chemical vapor deposition, ball milling, laser ablation, thermal decomposition and chemical reduction. Chemical reduction is usually preferred, due to its ease and cost-effectiveness. There are several types of compound used as reducing agents in nanoparticle synthesis, and one recent development is the use of biological entities as environmentally friendly reductants. This book will highlight the role of reducing agents in the chemical synthesis of nanoparticle systems, presenting the main categories of reducing agents, which vary on reactivity, selectivity, availability and toxicity. It will provide a comprehensive presentation of both modern and more conventional types of reagents. Emphasis will be given on the presentation not only of the functionality, but also of all the different advantages and limitations of each kind of reducing agent. With contributions from global experts, this title will be appropriate for graduate students and researchers in nanochemistry, colloidal synthesis, inorganic chemistry, organometallic chemistry, chemical engineering, physical chemistry, materials science, biology and physics.
Download or read book Nanoparticles written by American Chemical Society. Meeting and published by . This book was released on 2008 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes recent advances in methods to synthesize, stabilize, passivate and functionalize diverse nanoparticles from metals, metal oxides, semiconductors, polymers, organics and biomolecules. A wide range of potential appplications with nanoparticles as building blocks are described.
Download or read book Ordered Porous Solids written by Valentin Valtchev and published by Elsevier. This book was released on 2011-08-11 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: The developments in the area of ordered nanoporous solids have moved beyond the traditional catalytic and separation uses and given rise to a wide variety of new applications in different branches of chemistry, physics, material science, etc. The activity in this area is due to the outstanding properties of nanoporous materials that have attracted the attention of researchers from different communities. However, recent achievements in a specific field often remain out of the focus of collaborating communities. This work summarizes the latest developments and prospects in the area of ordered porous solids, including synthetic layered materials (clays), microporous zeolite-type materials, ordered mesoporous solids, metal-organic-framework compounds (MOFs), carbon, etc. All aspects, from synthesis via comprehensive characterization to the advanced applications of ordered porous materials, are presented. The chapters are written by leading experts in their respective fields with an emphasis on recent progress and the state of the art. Summarizes the latest developments in the field of ordered nanoporous solids Presents state-of-the-art coverage of applications related to porous solids Incorporates 28 contributions from experts across the disciplines
Download or read book Colloidal Metal Oxide Nanoparticles written by and published by Elsevier. This book was released on 2019-10-16 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques Presents key applications, including biomedical, energy, electronic and environmental Discusses the most relevant techniques for synthesis, patterning and characterization
Download or read book Nanoparticles written by Celso de Mello Donegá and published by Springer. This book was released on 2014-10-21 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book can be roughly divided into three parts: fundamental physico-chemical and physical principles of Nanoscience, chemistry and synthesis of nanoparticles, and techniques to study nanoparticles. The first chapter is concerned with the origin of the size dependence of the properties of nanomaterials, explaining it in terms of two fundamental nanoscale effects. This chapter also serves as a general introduction to the book, briefly addressing the definition and classification of nanomaterials and the techniques used to fabricate and study them. Chapter 2 lays out the theoretical framework within which to understand size effects on the properties of semiconductor nanocrystals, with particular emphasis on the quantum confinement effect. The optical properties of metal nanoparticles and metal nanostructures (periodic lattices) are discussed in Chapter 3. Chapter 4 is devoted to nanoporous materials, treating in detail their synthesis, structure and functional properties, as well as the physical properties of liquids confined in nanopores. The preparation methods, characterization techniques, and applications of supported nanoparticles are covered in Chapter 5. The sixth Chapter presents the essential physical-chemical concepts needed to understand the preparation of colloidal inorganic nanoparticles, and the remarkable degree of control that has been achieved over their composition, size, shape and surface. The last four Chapters are dedicated to a few selected characterization techniques that are very valuable tools to study nanoparticles. Chapter 7 concentrates on electron microscopy techniques, while Chapter 8 focuses on scanning probe microscopy and spectroscopy. Electron paramagnetic resonance (EPR) based spectroscopic techniques and their application to nanoparticles are explored in Chapter 9. Finally, Chapter 10 shows how solution Nuclear Magnetic Resonance (NMR) spectroscopic techniques can be used to unravel the surface chemistry of colloidal nanoparticles.
Download or read book Colloidal Nanoparticles written by Nikhil R Jana and published by CRC Press. This book was released on 2019-03-05 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will focus on synthesis, coating and functionalization chemistry of selected nanoparticles that are most commonly used in various biomedical applications. Apart from standard selected chemical synthetic methods, it focusses on design consideration of functionalization, selected coating chemistry for transforming as synthesized nanoparticle, selected conjugation chemistries and purification approach for such nanoparticles. It also includes state-of-art/future prospect of nanodrugs suitable for clinical applications. There will material on general application potential of these nanoparticles, importance of functionalization and common problems faced by non-chemists.
Download or read book Colloidal Synthesis of Plasmonic Nanometals written by Luis Liz-Marzán and published by CRC Press. This book was released on 2020-04-23 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noble metal nanoparticles have attracted enormous scientific and technological interest because of their unique optical properties, which are related to surface plasmon resonances. The interest in nanosized metal particles dates back to ancient societies, when metals were used in various forms as decorative elements. From the famous Lycurgus cup, made by the Romans in the 4th century AD, through thousands of stained glasses in churches and cathedrals all over medieval Europe, bright-yellow, green, or red colors have been obtained by a touch of metallic additions during glass blowing. This peculiar interaction of light with nanometals can be widely tuned through the morphology and assembly of nanoparticles, thereby expanding the range of potential applications, from energy and information storage to biomedicine, including novel diagnostic and therapeutic methods. This book compiles recent developments that clearly illustrate the state of the art in this cutting-edge research field. It comprises different review articles written by the teams of Prof. Luis Liz-Marzán, an international leader in chemical nanotechnology who has made seminal contributions to the use of colloid chemistry methods to understand and tailor the growth of metal particles at the nanoscale. Apart from synthesis, the book also describes in detail the plasmonic properties of nanomaterials and illustrates some representative applications. This book will appeal to anyone involved in nanotechnology, nanocrystal growth, nanoplasmonics, and surface-enhanced spectroscopies.
Download or read book Colloidal Nanoparticles for Heterogeneous Catalysis written by Priscila Destro and published by Springer. This book was released on 2018-12-13 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the formation of colloidal gold–copper (AuCu) alloy nanoparticles and evaluate their application in heterogeneous catalysis. Metal alloys are extremely versatile materials that have been used since the Antiquity to improve the properties of commonly used metals, therefore the understanding of their properties has fostered the applications in areas such as photonics, sensors, clinical diagnostics, and especially in heterogeneous catalysis, which allows catalyst active sites to be modulated. In this book, readers will appreciate the fundamental aspects involved in the synthesis of AuCu nanoalloys, including real-time information about their atomic organization, electronic properties, as well a deeper understand about the behavior of AuCu supported nanoalloys under real catalytic conditions, providing interesting insights about the effect of the support on the nanoalloy stability. The results presented here open new horizons for using metal alloys in catalysis and also other areas where the metal–support interface may play a crucial role.
Download or read book Colloids for Nanobiotechnology written by Wolfgang Parak and published by Elsevier. This book was released on 2020-05-13 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloids for Nanobiotechnology: Synthesis, Characterization and Potential Applications, Volume 17, offers a range of perspectives on emerging nano-inspired colloidal applications. With an emphasis on biomedical and environmental opportunities and challenges, the book outlines how nanotechnology is being used to increase the uses and impact of colloid science. Nanotechnology offers new horizons for colloidal research and synthesis routes that allow for the production of highly reproducible and defined materials. This book presents new characterization methods and a fundamental understanding of basic physicochemical, physical and chemical properties. Explores the use of nanotechnology in enhancing colloidal characterization techniques Explains how colloids are being used in a range of nanomedical applications Demonstrates how nanotechnology is being used to create more efficient colloidal synthesis techniques
Download or read book Metrology and Standardization for Nanotechnology written by Elisabeth Mansfield and published by John Wiley & Sons. This book was released on 2017-01-20 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the promotion of global trading and the reduction of potential risks, the role of international standardization of nanotechnologies has become more and more important. This book gives an overview of the current status of nanotechnology including the importance of metrology and characterization at the nanoscale, international standardization of nanotechnology, and industrial innovation of nano-enabled products. First the field of nanometrology, nanomaterial standardization and nanomaterial innovation is introduced. Second, major concepts in analytical measurements are given in order to provide a basis for the reliable and reproducible characterization of nanomaterials. The role of standards organizations are presented and finally, an overview of risk management and the commercial impact of metrology and standardization for industrial innovations.
Download or read book Colloid and Interface Chemistry for Nanotechnology written by Peter Kralchevsky and published by CRC Press. This book was released on 2016-04-19 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloid and interface science dealt with nanoscale objects for nearly a century before the term nanotechnology was coined. An interdisciplinary field, it bridges the macroscopic world and the small world of atoms and molecules. Colloid and Interface Chemistry for Nanotechnology is a collection of manuscripts reflecting the activities of research te
Download or read book Controlled Synthesis of Nanoparticles in Microheterogeneous Systems written by Vincenzo Turco Liveri and published by Springer Science & Business Media. This book was released on 2006-01-04 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first step in developing nanoscience and nanotechnology is the production of nanoparticles. Controlled Synthesis of Nanoparticles in Microheterogeneous Systems contains descriptions of one of the most powerful bottom-up methods of synthesizing size controlled and stable nanoparticles. This method is based on the use of surfactant-containing microheterogeneous systems: liquid crystals, monolayers and multilayers, solutions of direct and reversed micelles, direct and reversed vesicles, and water-in-oil and oil-in-water microemulsions. The author is prominent in the field of physico-chemical characterization of microheterogeneous systems and their use as ideal solvent and reaction media for the production and long-term storage of nanomaterials. This is the first book that attempts to unify the knowledge necessary for judicious manipulation of surfactant-based systems and a fine tuning of geometric and physico-chemical properties of nanoparticles of a wide variety of substances. Prof. Turco Liveri has chosen to write an easy-to-read book aiming to be evocative rather than exhaustive. Because of the intense interest in nanoscience and nanomaterials, this book is an important fundamental work that fits ideally into the series Nanostructure Science and Technology and will be useful for a wide range of students and young researchers involved in the study and manipulation of matter at the atomic level.
Download or read book Colloidal Polymers written by Abdelhamid Elaissari and published by CRC Press. This book was released on 2003-08-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amidst developments in nanotechnology and successes in catalytic emulsion polymerization of olefins, polymerization in dispersed media is arousing an increasing interest from both practical and fundamental points of view. This text describes ultramodern approaches to synthesis, preparation, characterization, and functionalization of latexes, nanoparticles, and numerous additional colloidal polymer systems. In chapters contributed by leading international researchers, it communicates critical parameters for method selection, presents guidelines for controlling structural and colloid properties, presents recent results and information on polymer colloids, and describes other tools to assist in the production of desirable outcomes.
Download or read book Noble Metal Nanoparticles written by Ignác Capek and published by Springer. This book was released on 2017-07-20 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader the chemistry of reaction approaches by which noble metal nanoparticles are synthesized, including synthetic approaches using the Brust–Schiffrin method , a high-temperature solution-phase synthesis, polymer and biological entities, weak and strong reducing and capping agents, the low and high temperatures, various additives and various novel approaches such as plasma, ionic liquids, UV light and gamma rays and others. This book starts with a brief overview of foundation work concerned with the chapter topics such as nanomaterials, nanoscience, surface-capping molecules, traditional and nontraditional reduction agents, In addition, chemical and physical properties of noble metal nanoparticles with different structures and elements such as monolayered clusters, nanorods, and bimetallic nanoparticles are described comprehensively. The aim is to summarize the fundamentals and mechanistic approaches in the preparation and characterization of metal colloidal nanoparticles and dispersions. In this way the reader is provided with a systematic and coherent picture of the interesting field of nanoscience based on noble metal colloidal nanoparticles. Intended as a wide-ranging overview, the book is a resource for novices in the field as well as for specialists, particularly those scientists working in the area of nanoparticle synthesis. Nanoscience and nanotechnology are discussed from the chemist’s point of view. Therefore, this volume describes in detail the terms, definitions, theories, experiments, and techniques dealing with the synthesis of noble metal nanoparticles. The material presented here is essential reading for research chemists, technologists, and engineers in the fields of specialty nanomaterials and metal industries, and also is highly valuable for researchers in university, institutional, and governmental laboratories, especially for those at advanced stages of their careers.
