Download or read book Method of Ultrasonic Measurement of Texture written by and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A method for measuring texture of metal plates or sheets using non-destructive ultrasonic investigation includes measuring the velocity of ultrasonic energy waves in lower order plate modes in one or more directions, and measuring phase velocity dispersion of higher order modes of the plate or sheet if needed. Texture or preferred grain orientation can be derived from these measurements with improves reliability and accuracy. The method can be utilized in production on moving metal plate or sheet.
Download or read book Semi automatic System for Ultrasonic Measurement of Texture written by and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A means and method for ultrasonic measurement of texture non-destructively and efficiently. Texture characteristics are derived by transmitting ultrasound energy into the material, measuring the time it takes to be received by ultrasound receiving means, and calculating velocity of the ultrasound energy from the timed measurements. Textured characteristics can then be derived from the velocity calculations. One or more sets of ultrasound transmitters and receivers are utilized to derive velocity measurements in different angular orientations through the material and in different ultrasound modes. An ultrasound transmitter is utilized to direct ultrasound energy to the material and one or more ultrasound receivers are utilized to receive the same. The receivers are at a predetermined fixed distance from the transmitter. A control means is utilized to control transmission of the ultrasound, and a processing means derives timing, calculation of velocity and derivation of texture characteristics.
Download or read book Semi automatic for Ultrasonic Measurement of Texture written by and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A method for measuring texture of metal plates or sheets using non-destructive ultrasonic investigation includes measuring the velocity of ultrasonic energy waves in lower order plate modes in one or more directions, and measuring phase velocity dispersion of higher order modes of the plate or sheet if needed. Texture or preferred grain orientation can be derived from these measurements with improved reliability and accuracy. The method can be utilized in production on moving metal plate or sheet.
Download or read book Nondestructive Characterization of Materials IV written by J.F. Bussière and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a great deal of interest in extending nondestructive technologies beyond the location and identification of cracks and voids. Specifically there is growing interest in the application of nondestructive evaluation (NOEl to the measurement of physical and mechanical properties of materials. The measurement of materials properties is often referred to as materials characterization; thus nondestructive techniques applied to characterization become nondestructive characterization (NDCl. There are a number of meetings, proceedings and journals focused upon nondestructive technologies and the detection and identification of cracks and voids. However, the series of symposia, of which these proceedings represent the fourth, are the only meetings uniquely focused upon nondestructive characterization. Moreover, these symposia are especially concerned with stimulating communication between the materials, mechanical and manufacturing engineer and the NDE technology oriented engineer and scientist. These symposia recognize that it is the welding of these areas of expertise that is necessary for practical development and application of NDC technology to measurements of components for in service life time and sensor technology for intelligent processing of materials. These proceedings are from the fourth international symposia and are edited by c.o. Ruud, J. F. Bussiere and R.E. Green, Jr. . The dates, places, etc of the symposia held to date area as follows: Symposia on Nondestructive Methods for TITLE: Material Property Determination DATES: April 6-8, 1983 PLACE: Hershey, PA, USA CHAIRPERSONS: C.O. Ruud and R.E. Green, Jr.
Download or read book Introduction to Texture Analysis written by Olaf Engler and published by CRC Press. This book was released on 2009-11-16 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping broke new ground by collating seventy years worth of research in a convenient single-source format. Reflecting emerging methods and the evolution of the field, the second edition continues to provide comprehensive coverage of the concepts, pra
Download or read book Introduction to Texture Analysis written by Valerie Randle and published by CRC Press. This book was released on 2000-08-07 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encompassing the concepts, practice, and application of orientation analysis, Introduction to Texture Analysis is an essential reference source for reserachers in textiles. The author uses an accessible style to share her expertise, providing comprehensive coverage of the theory and practice of the texture techniques now available and discusses their applications in research and industry. The text considers the merits of each technique for specific applications. Case studies expand upon the author's explanations and help illustrate the main principles involved. Topics include applications of diffraction, SEM- and TEM-based techniques, and crystallographic analyses.
Download or read book Materials Characterization Using Nondestructive Evaluation NDE Methods written by Gerhard Huebschen and published by Woodhead Publishing. This book was released on 2016-03-23 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Characterization Using Nondestructive Evaluation (NDE) Methods discusses NDT methods and how they are highly desirable for both long-term monitoring and short-term assessment of materials, providing crucial early warning that the fatigue life of a material has elapsed, thus helping to prevent service failures. Materials Characterization Using Nondestructive Evaluation (NDE) Methods gives an overview of established and new NDT techniques for the characterization of materials, with a focus on materials used in the automotive, aerospace, power plants, and infrastructure construction industries. Each chapter focuses on a different NDT technique and indicates the potential of the method by selected examples of applications. Methods covered include scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques. The authors review both the determination of microstructure properties, including phase content and grain size, and the determination of mechanical properties, such as hardness, toughness, yield strength, texture, and residual stress. - Gives an overview of established and new NDT techniques, including scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques - Reviews the determination of microstructural and mechanical properties - Focuses on materials used in the automotive, aerospace, power plants, and infrastructure construction industries - Serves as a highly desirable resource for both long-term monitoring and short-term assessment of materials
Download or read book Ultrasonic Measurement of Texture in Metal Sheets written by Wenliang Tang and published by . This book was released on 1993 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultrasonic Methods in Evaluation of Inhomogeneous Materials written by A. Alippi and published by Springer Science & Business Media. This book was released on 1987-03-31 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the School, the content of which is reflected in this book, is to bring together experiences and knowledge of those acousticians who are particularly sensible to materials and their properties, specifically to those materials that may be called inhomo geneous. The two things together: acoustics and inhomogeneity, define factually a dimension less parameter, AI a, which is the ratio between the sound wavelength and the spatial length of the material where its physical characteristics notably change. An implicit defmition is, therefore, at hand for an inhomogeneous medium, which has the characteristic of a condi tioned definition and sets a looser constraint to the otherwise strict statement of invariance under translations. Composite, biologicai, porous, stratified materials are in the list of inhomogeneous materials, whose technological or structural interest has grown greatly in recent times. Ul trasonic waves offer a means for their investigation, which is valuable for it can be non destructive, continuous in time, spatially localized, dependent on the size of inhomoge neities.
Download or read book Ultrasonic Measurement of Texture in Metal Sheets written by Wanliang Tang and published by . This book was released on 1993 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Ultrasonic Methods for Material and Structure Inspection written by Tribikram Kundu and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic signals are increasingly being used for predicting material behavior, both in an engineering context (detecting anomalies in a variety of structures) and a biological context (examining human bones, body parts and unborn fetuses). Featuring contributions from authors who are specialists in their subject area, this book presents new developments in ultrasonic research in both these areas, including ultrasonic NDE and other areas which go beyond traditional imaging techniques of internal defects. As such, both those in the biological and physical science communities will find this an informative and stimulating read.
Download or read book Texture Measurement of Foods written by A. Kramer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even before the publication of Special Technical Publication 433 of the American Society for Testing and Materials, it became obvious that the brief treatment given to the principles and techniques for sensory measurement and analysis of texture in that volume was all too brief; hence, a task force of ASTM Committee E-18 was formed to develop an authoritative and comprehensive volume on this most complex and important subject to provide within one cover for the student, researcher, and the food manufacturer, a definition and an understanding of the subject offood texture, as well as sensory and objective methods for its measurement. This most difficult task appeared to be possible only after the task force had obtained the assistance of special ists in the many disciplines involved, and after deciding to limit the dissertation to the measurement of texture of foods only. The task was further clarified when Dr. Finney proposed an outline of six chapters, beginning with one on definition. The second chapter was to be on principles of sensory evaluations, the third on sensory measurements, the fourth on principles of objective evaluation, the fifth on objective measurements, and the final concluding chapter on subjective-objective analogues. The first drafts of these six chapters constituted a symposium on texture presented before a joint session at the 1971 Annual Meeting of the Institute of Food Technology and the American Society for Testing and Materials.
Download or read book Ultrasound in Food Processing written by Malcolm J. W. Povey and published by Springer Science & Business Media. This book was released on 1998 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the future development of ultrasound in food processing, covering both High Power (material altering) and Low Power (non-destructive testing) applications. Leading work is presented for a non-expert audience, so that people in industry and academia can make informed decisions about future research and the adoption of ultrasound techniques. It will be of particular interest to food manufacturing personnel responsible for process development, engineering and research. It will be invaluable for scientists and technologists involved in active ultrasound research and instrument manufacture.
Download or read book Texture in Food written by B. M. McKenna and published by Woodhead Publishing. This book was released on 2004-04-14 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Key research trends and their practical implications in improving product quality, Texture in food Volume 1: Semi-solid foods will be a standard reference for the food industry. It is complemented by a second volume on the texture of solid foods. Book jacket.
Download or read book Ultrasonic Measurement of Residual Stress in Textured Materials written by A. Arora and published by . This book was released on 1982 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: A method is developed that determines the state of stress in a test piece in the presence of texture, that is, preferred grain orientation. This method uses frequency domain analysis of the acoustic birefringence by which an ultrasonic shear wave propagating in a material travels at slightly different velocities in the polarizations parallel and perpendicular to the axes of texture or stress. Results obtained from a Ti-6%Al-4%V block confirm that the velocity shift is linearly dependent on the amount of stress, but is independent of frequency in the case of stress as opposed to the texture. Experimental considerations involving transducer characteristics, bond (transducer to specimen) characteristics, specimen size, and signal processing are discussed in relation to the reliability and repeatability of the data.
Download or read book Ultrasonic Instrument for the Measurement of Stress and Texture written by Emmanuel P. Papadakis and published by . This book was released on 1990* with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Textures of Materials written by Zhide Liang and published by . This book was released on 1996 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
