Download or read book Methanol Synthesis written by Jerzy Skrzypek and published by . This book was released on 1994 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Methanol Synthesis Technology written by Sunggyu Lee and published by CRC Press. This book was released on 1989-12-04 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This easy-to-read work is a comprehensive review which focuses primarily on catalytic methanol synthesis. It includes a historic summary of the development of methanol synthesis technology, as well as extensive discussions on statistical experimental design, fabrication and operation of laboratory scale systems. This unique volume also discusses various new catalysts and processes, with special attention to the thermodynamics of methanol synthesis-especially in relation to the new liquid phase process. The comprehensive and practical approach to chemical and synfuel process development makes it an excellent reference in methanol synthesis, reactor design, and scale-up. Written as a practical guide to researchers who are involved in hands-on process research, this book is also a valuable asset to practicing chemical engineers and graduate students interested in reaction engineering, thermodynamics, catalyst development and process design.
Download or read book Catalyst Handbook written by Martyn V. Twigg and published by Routledge. This book was released on 2018-12-19 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between theory and practice. It provides fundamental information on heterogeneous catalysis and the practicalities of the catalysts and processes used in producing ammonia, hydrogen and methanol via hydrocarbon steam reforming. It also covers the oxidation reactions in making formaldehyde from methanol, nitric acid from ammonia and sulphuric acid from sulphur dioxide. Designed for use in the chemical industry and by those in teaching, research and the study of industrial catalysts and catalytic processes. Students will also find this book extremely useful for obtaining practical information not available in more conventional textbooks.
Download or read book The Chemistry of the Catalyzed Hydrogenation of Carbon Monoxide written by G. Henrici-Olive and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the oil embargo, in the winter 1973174, parts of Western Europe present ed an almost war-like aspect on Saturdays and Sundays: no traffic on the high ways, no crowds at ski resorts and other weekend entertainment places, no gaso line at the pumps. Living and teaching then in that part of the world, and discussing the situa tion with our students, we came to the conclusion that it would be timely to col lect the fine chemistry already known at the time in the field of conversion of coal to gasoline and other chemicals, and by this way help to draw the attention to this important alternative to crude oil. The idea of this book was born. The energy shock of the early seventies has been healthy and of great conse quences in chemistry. Large amounts of research money have been put to work since, and our knowledge of the possibilities and limitations of coal-based chemistry has increased enormously. During several years it appeared inap propriate to write a monograph about a topic which was in the midst of such an impetuous development. Nevertheless, we collected, and critically selected, the upcoming work as it appeared in the literature, and also tried to provide some modest input ourselves. Now, ten years later, the situation seems to be settled to a certain degree.
Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.
Download or read book Carbon Dioxide Utilization for Global Sustainability written by Sang-Eon Park and published by Elsevier. This book was released on 2004-10-27 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing global environmental problems, such as global warming is essential to global sustainability. Continued research leads to advancement in standard methods and produces new data. Carbon Dioxide Utilization for Global Sustainability: Proceedings of the 7th ICCDU (International Conference on Carbon Dioxide Utilization) reflects the most recent research results, as well as stimulating scientific discussions with new challenges in advancing the development of carbon dioxide utilization. Drawing on a wealth of information, this well structured book will benefit students, researchers and consultants looking to catch up on current developments in environmental and chemical engineering.* Provides comprehensive data on CO2 utilisation* Contains up-to-date information, including recent research trends* Is written for students, researchers and consultants in environmental and chemical engineering
Download or read book CO2 Hydrogenation Catalysis written by Yuichiro Himeda and published by John Wiley & Sons. This book was released on 2021-06-28 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the effective catalysts and latest advances in CO2 conversion in chemicals and fuels Carbon dioxide hydrogenation is one of the most promising and economic techniques to utilize CO2 emissions to produce value-added chemicals. With contributions from an international team of experts on the topic, CO2 Hydrogenation Catalysis offers a comprehensive review of the most recent developments in the catalytic hydrogenation of carbon dioxide to formic acid/formate, methanol, methane, and C2+ products. The book explores the electroreduction of carbon dioxide and contains an overview on hydrogen production from formic acid and methanol. With a practical review of the advances and challenges in future CO2 hydrogenation research, the book provides an important guide for researchers in academia and industry working in the field of catalysis, organometallic chemistry, green and sustainable chemistry, as well as energy conversion and storage. This important book: Offers a unique review of effective catalysts and the latest advances in CO2 conversion Explores how to utilize CO2 emissions to produce value-added chemicals and fuels such as methanol, olefins, gasoline, aromatics Includes the latest research in homogeneous and heterogeneous catalysis as well as electrocatalysis Highlights advances and challenges for future investigation Written for chemists, catalytic chemists, electrochemists, chemists in industry, and chemical engineers, CO2 Hydrogenation Catalysis offers a comprehensive resource to understanding how CO2 emissions can create value-added chemicals.
Download or read book Natural Gas Conversion VI written by T.H. Fleisch and published by Elsevier. This book was released on 2001-06-01 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 6th Natural Gas Conversion Sumposium held in Alaska in June 2001. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings.The 6th Natural Gas Conversion Symposium is conducted under the overall direction of the Organizing Committee. The Program Committee was responsible for the review, selection, editing of most of the manuscripts included in this volum. A standing International Advisory Board has ensured the effective long-term planning and the continuity and technical excellence of these meetings.
Download or read book Nanoscale Materials in Chemistry written by Kenneth J. Klabunde and published by John Wiley & Sons. This book was released on 2009-10-15 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on nanoscale materials chemistry—now revised and updated. This extensive text provides twenty-two revised chapters on the preparations, applications, and characterization as well as the environmental and toxicological aspects of nanoscale materials, with an emphasis on the chemistry component. This Second Edition contains core topics including: New synthetic methods for nanomaterials Nanostructured solids Organized two- and three-dimensional nanocrystals Nanotubes, ribbons, and sheets Nanocatalysts, sorbents, and energy applications Unique physical properties of nanomaterials Photochemistry of nanomaterials Biological and environmental aspects of nanomaterials With input from top experts in the field, such as Bruce Dunn, Vicki Grassian, Warren Ford, and Chris Sorensen, among others, Nanoscale Materials in Chemistry presents a balanced survey of different topics in basic nanoparticle science, and includes helpful end-of-chapter questions and answers. Significantly expanded, the Second Edition remains a key text for understanding the fundamentals of nanoscale materials chemistry and a reliable resource for scientists and researchers.
Download or read book Catalytic Carbonylation Reactions written by Matthias Beller and published by Springer Science & Business Media. This book was released on 2006-09-14 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbonylation reactions are of major importance in both organic and industrial chemistry. Due to the availability, price and reactivity pattern, carbon monoxide is becoming a more and more important building block for fine and bulk chemicals. The major reaction types of carbon monoxide are comprehensively discussed by leading experts from academia and industry. The authors highlight important carbonylation reactions such as hydroformylation, alkoxy-carbonylations, co/olefin-copolymerization, Pauson-Khand reactions and others. They illustrate applications in organic synthesis and give industrial examples. This volume is designed to provide graduate students and researchers with essential information on the use of carbon monoxide in organic synthesis. Therefore, the reader will get a balanced view of this developing and complex subject.
Download or read book Hydrocarbons from Methanol written by Clarence D. Chang and published by Marcel Dekker. This book was released on 1983 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiphase Reactor Engineering for Clean and Low Carbon Energy Applications written by Yi Cheng and published by John Wiley & Sons. This book was released on 2017-02-22 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive review on the brand-new development of several multiphase reactor techniques applied in energy-related processes Explains the fundamentals of multiphase reactors as well as the sophisticated applications Helps the reader to understand the key problems and solutions of clean coal conversion techniques Details the emerging processes for novel refining technology, clean coal conversion techniques, low-cost hydrogen productions and CO2 capture and storage Introduces current energy-related processes and links the basic principles of emerging processes to the features of multiphase reactors providing an overview of energy conversion in combination with multiphase reactor engineering Includes case studies of novel reactors to illustrate the special features of these reactors
Download or read book Synthesis of Solid Catalysts written by Krijn P. de Jong and published by John Wiley & Sons. This book was released on 2009-06-22 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book combines recent progress with a discussion of the general aspects of catalyst preparation. The first part deals with the basic principles of solid catalyst preparation, explaining the main aspects of sol-gel chemistry and interfacial chemistry, followed by such techniques as co-precipitation and immobilization. New tools for catalyst preparation research, including microspectroscopy and high-throughput experimentation, are also taken into account. The second part heightens the practical relevance by providing six case studies on such topics as the preparation of zeolites, hydrotreating catalysts, methanol catalysts and gold catalysts
Download or read book Catalysis An Integrated Approach written by R.A. van Santen and published by Elsevier. This book was released on 2000-09-26 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on industrially relevant reactions which are catalyzed by heterogeneous and homogeneous catalysts. Homogeneous catalysis by metal complexes is treated jointly with heterogeneous catalysis using metallic and non-metallic solids. In both areas the high degree of sophistication of spectroscopic techniques and theoretical modelling has led to an enormous increase in our understanding at the molecular level. This holds for the kinetics of the reactions and the reactivities of the catalysts, as well as for the syntheses of the catalytic materials. The development of catalysis science since the first edition of this book has necessitated a thorough revision, including special chapters on biocatalysis, catalyst characterization and adsorption methods. The multidisciplinary nature of catalysis is reflected in the choice of a novel combination of basic disciplines which will be refreshing and inspiring to readers.
Download or read book Catalyst Manufacture written by Alvin B. Stiles and published by Routledge. This book was released on 2019-04-04 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work provides a practical, step-by-step guide to the preparation, production and operation of all commercially used catalysts, taking into account general safety considerations and up-to-date regulations from the Occupational Health Administration and the Environmental Protection Agency. This second edition contains updated and expanded material on the regeneration, reactivity and recovery of used catalysts; problems related to environmental catalysis; a unique CO oxidation catalyst; and more.;This work is intended for chemical, plant, automotive, petroleum, fuel and design engineers; and upper-level graduate and graduate students in these disciplines.
Download or read book Coal Gasification and Its Applications written by David A. Bell and published by William Andrew. This book was released on 2010-12-08 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Skyrocketing energy costs have spurred renewed interest in coal gasification. Currently available information on this subject needs to be updated, however, and focused on specific coals and end products. For example, carbon capture and sequestration, previously given little attention, now has a prominent role in coal conversion processes.This book approaches coal gasification and related technologies from a process engineering point of view, with topics chosen to aid the process engineer who is interested in a complete, coal-to-products system. It provides a perspective for engineers and scientists who analyze and improve components of coal conversion processes.The first topic describes the nature and availability of coal. Next, the fundamentals of gasification are described, followed by a description of gasification technologies and gas cleaning processes. The conversion of syngas to electricity, fuels and chemicals is then discussed. Finally, process economics are covered. Emphasis is given to the selection of gasification technology based on the type of coal fed to the gasifier and desired end product: E.g., lower temperature gasifiers produce substantial quantities of methane, which is undesirable in an ammonia synthesis feed. This book also reviews gasification kinetics which is informed by recent papers and process design studies by the US Department of Energy and other groups, and also largely ignored by other gasification books.• Approaches coal gasification and related technologies from a process engineering point of view, providing a perspective for engineers and scientists who analyze and improve components of coal conversion processes • Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes • Emphasizes the importance of the coal types fed to the gasifier and desired end products • Covers gasification kinetics, which was largely ignored by other gasification books - Provides a perspective for engineers and scientists who analyze and improve components of the coal conversion processes - Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes - Covers gasification kinetics, which was largely ignored by other gasification books
