Download or read book Methane Steam Reforming Activity Stability and Characterization of Nickel Supported Catalysts written by Abdulrhman Saleh al-Ubaid and published by . This book was released on 1984 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fuel Cells Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. Chapters written by experts in each area Extensive bibliography supporting each chapter Detailed index Up-to-date diagrams and full colour illustrations

Download or read book Preparation Characterization and Reactivity of NI CE SBA 15 Catalysts in Dry Reforming of Methane written by Marie-Nour Kaydouh and published by . This book was released on 2013 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fluid Flow Through Packed and Fluidized Systems written by Max Leva and published by . This book was released on 1951 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanoparticle Design and Characterization for Catalytic Applications in Sustainable Chemistry written by Rafael Luque and published by Royal Society of Chemistry. This book was released on 2019-10-05 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an introduction to the preparation and characterisation of nanomaterials and their design for specific catalytic applications.

Download or read book Methane Conversion written by D.M. Bibby and published by Elsevier. This book was released on 1988-03-01 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume comprises the invited plenary lectures, contributed and poster papers presented at a symposium organised to mark the successful inauguration of the world's first commercial plant for production of gasoline from natural gas, based on the Mobil methanol-to-gasoline process. The objectives of the Symposium were to present both fundamental research and engineering aspects of the development and commercialization of gas-to-gasoline processes. These include steam reforming, methanol synthesis and methanol-to-gasoline. Possible alternative processes e.g. MOGD, Fischer-Tropsch synthesis of hydrocarbons, and the direct conversion of methane to higher hydrocarbons were also considered.The papers in this volume provide a valuable and extremely wide-ranging overview of current research into the various options for natural gas conversion, giving a detailed description of the gas-to-gasoline process and plant. Together, they represent a unique combination of fundamental surface chemistry catalyst characterization, reaction chemistry and engineering scale-up and commercialization.

Download or read book Activity and Stability of High Surface Area Nickel Supported Catalysts During the Dry Reforming of Methane written by Vardan T. Danghyan and published by . This book was released on 2021 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heterogeneous Catalysis in Industrial Practice written by Charles N. Satterfield and published by Krieger Publishing Company. This book was released on 1996 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blending theory and practice, this text provides the information needed to work with solid catalysts in the laboratory, pilot plant or commercial installation. This revised and expanded edition incorporates recent theories and industrial applications.

Download or read book Concepts in Syngas Manufacture written by Jens Rostrup-Nielsen and published by World Scientific. This book was released on 2011 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a general overview of syngas technologies as well as an in-depth analysis of the steam reforming process. Syngas is a mixture of hydrogen and carbon oxides which can be made from hydrocarbons, coal and biomass. It is an important intermediate in the chemical industry for manufacture of ammonia, methanol and other petrochemicals as well as hydrogen for refineries and fuel cells. Syngas is playing a growing role in the energy sector, because it can be converted into a number of important energy carriers and fuels. Syngas catalysis creates new options and flexibility in the complex energy network. The steam reforming process is the main technology today for manufacture of syngas. It is a complex intern-mingling of catalysis and heat transfer with restrictions caused by secondary phenomena such as carbon formation. Many of the principles are applicable for other gasification technologies of growing importance. Concepts of Syngas Preparation aims to provide a comprehensive introduction to this complex field of growing importance and gives a detailed analysis of the catalyst and process problems. This book also serves as an important link between science and industry by illustrating how the basic principles can be applied to solve design issues and operational problems.

Download or read book Supported Metals in Catalysis written by James Arthur Anderson and published by World Scientific. This book was released on 2012 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from experts in supported metal catalysis, from both the industry and academia, this book presents the latest developments in characterization and application of supported metals in heterogeneous catalysis. In addition to a thorough and updated coverage of the traditional aspects of heterogeneous catalysis such as preparation, characterization and use in well-established technologies such as Naphtha reforming, the book also includes emerging areas where supported metal catalysis will make significant contributions in future developments, such as fuel cells and fine chemicals synthesis. The second edition of Supported Metals in Catalysis comes complete with new and updated chapters containing important summaries of research in a rapidly evolving field. Very few other books deal with this highly pertinent subject matter, and as such, it is a must-have for anyone working in the field of heterogeneous catalysis.

Download or read book Industrial Catalysis written by Jens Hagen and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in it's 3rd Edition, Industrial Catalysis offers all relevant information on catalytic processes in industry, including many recent examples. Perfectly suited for self-study, it is the ideal companion for scientists who want to get into the field or refresh existing knowledge. The updated edition covers the full range of industrial aspects, from catalyst development and testing to process examples and catalyst recycling. The book is characterized by its practical relevance, expressed by a selection of over 40 examples of catalytic processes in industry. In addition, new chapters on catalytic processes with renewable materials and polymerization catalysis have been included. Existing chapters have been carefully revised and supported by new subchapters, for example, on metathesis reactions, refinery processes, petrochemistry and new reactor concepts. "I found the book accesible, readable and interesting - both as a refresher and as an introduction to new topics - and a convenient first reference on current industrial catalytic practise and processes." Excerpt from a book review for the second edition by P. C. H. Mitchell, Applied Organometallic Chemistry (2007)

Download or read book Dry Reforming of Methane on Promoted LA MG and RH NI Based Catalyst Supported on Commercial Silica written by Ali khansa and published by . This book was released on 2014 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Natural Gas Conversion written by A. Holmen and published by Elsevier. This book was released on 1991-05-27 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings reflect the extensive fundamental and applied research efforts that are currently being made on the conversion of gas, in particular on the direct conversion of methane. The Symposium in Oslo focused on the following topics: Direct conversion of methane, Fischer-Tropsch chemistry, methanol conversion and natural gas conversion processes. The main aim was to present the state-of-the-art and progress currently being made within each of these areas. The book contains the papers presented and includes plenary lectures, short communications and posters. The papers will be of interest to scientists and engineers working in the field of gas conversion, transportation fuels, primary petrochemicals and catalysis.

Download or read book Enriched Methane written by Marcello De Falco and published by Springer. This book was released on 2015-10-28 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together recent research from across the world on enriched methane, and examines the production, distribution and use of this resource in internal combustion engines and gas turbines. It aims to provide readers with an extensive account of potential technological breakthroughs which have the capacity to revolutionize energy systems. Enriched methane, a gas mixture composed by methane and hydrogen (10-30%vol), constitutes the first realistic step towards the application of hydrogen as an energy vector. It provides strong benefits in terms of emissions reduction, that is -11% of CO2, eq emission with the combustion of a 30%vol H2 mixture, if hydrogen is produced from renewable energy sources. Enriched methane offers the following advantages:• it can be produced at competitive costs; • it can be distributed by means of the medium pressure natural gas grid;• it can be stored in traditional natural gas storage systems; • it can feed natural gas internal combustion engine, improving conversion efficiency. /divdivThis book is intended for academics in chemical engineering and energy production, distribution and storage. It is also intended for energy producers, engineering companies and R&D organizations./divdivbr

Download or read book Catalysts for Syngas Production written by Javier Ereña Loizaga and published by MDPI. This book was released on 2020-12-10 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue on “Catalysts for Syngas Production”, included in the Catalysts open access journal, shows new research about the development of catalysts and catalytic routes for syngas production, and the optimization of the reaction conditions for the process. This issue includes ten articles about the different innovative processes for syngas production. Synthesis gas (or syngas) is a mixture of hydrogen and carbon monoxide, with different chemical composition and H2/CO molar ratios, depending on the feedstock and production technology used. Syngas may be obtained from alternative sources to oil, such as natural gas, coal, biomass, organic wastes, etc. Syngas is a very good intermediate for the production of high value compounds at the industrial scale, such as hydrogen, methanol, liquid fuels, and a wide range of chemicals. Accordingly, efforts should be made on the co-feeding of CO2 with syngas, as an alternative for reducing greenhouse gas emissions. In addition, more syngas will be required in the near future, in order to satisfy the demand for synfuels and high value chemicals.

Download or read book Preparation Characterization and Evaluation of Mg Al Mixed Oxide Supported Nickel Catalysts for the Steam Reforming of Ethanol written by Luke James Ivor Coleman and published by . This book was released on 2008 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conversion of ethanol to hydrogen or syngas can be achieved by reacting ethanol with water via steam reforming, CH3CH2OH + (1-x)H2O = (4-x)H2 + (2-x)CO + xCO2 (R.1) CH3CH2OH + H2O = 4H2 + 2CO (R.2) CO + H2O = H2 + CO2 (R.3) Ideally, the ethanol steam reforming reaction can achieve a hydrogen yield of 6 moles of hydrogen per mole of ethanol when the value of x in (R.1) equals 2. High theoretical H2 yield makes ethanol steam reforming a very attractive route for H2 production. Thermodynamic equilibrium studies have shown that ethanol steam reforming produces mixtures of H2, CO, CO2, and CH4 below 950 K, while above 950 K the ethanol steam reforming reaction (R.1) adequately describes the product composition In this study a series of 10wt% Ni loaded Mg-Al mixed oxide supported catalysts were evaluated for the production of hydrogen via the steam reforming of ethanol.

Download or read book In situ Characterization of Heterogeneous Catalysts written by José A. Rodriguez and published by John Wiley & Sons. This book was released on 2013-04-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helps researchers develop new catalysts for sustainable fueland chemical production Reviewing the latest developments in the field, this bookexplores the in-situ characterization of heterogeneous catalysts,enabling readers to take full advantage of the sophisticatedtechniques used to study heterogeneous catalysts and reactionmechanisms. In using these techniques, readers can learn to improvethe selectivity and the performance of catalysts and how to preparecatalysts as efficiently as possible, with minimum waste. In-situ Characterization of Heterogeneous Catalysts featurescontributions from leading experts in the field of catalysis. Itbegins with an introduction to the fundamentals and thencovers: Characterization of electronic and structural properties ofcatalysts using X-ray absorption fine structure spectroscopy Techniques for structural characterization based on X-raydiffraction, neutron scattering, and pair distribution functionanalysis Microscopy and morphological studies Techniques for studying the interaction of adsorbates withcatalyst surfaces, including infrared spectroscopy, Ramanspectroscopy, EPR, and moderate pressure XPS Integration of techniques that provide information on thestructural properties of catalysts with techniques that facilitatethe study of surface reactions Throughout the book, detailed examples illustrate how techniquesfor studying catalysts and reaction mechanisms can be applied tosolve a broad range of problems in heterogeneous catalysis.Detailed figures help readers better understand how and why thetechniques discussed in the book work. At the end of each chapter,an extensive set of references leads to the primary literature inthe field. By explaining step by step modern techniques for the in-situcharacterization of heterogeneous catalysts, this book enableschemical scientists and engineers to better understand catalystbehavior and design new catalysts for green, sustainable fuel andchemical production.