Download or read book Methane Activation and Utilization in the Petrochemical and Biofuel Industries written by Hua Song and published by Springer Nature. This book was released on 2021-11-15 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses effective and alternative uses for natural gas (NG) and highlights the utilization of NG in the field of methane activation and chemical production. It details the techniques used during the reforming process of petrochemical and bio-derived fuels and it presents cutting-edge research that describes the utilization of NG that enables it to be more cost-effective and eliminate the expensive greenhouse gas emitting process of hydrogen production. The book addresses three major topics: NG use in upstream heavy oil and bitumen upgrading, NG and its use in downstream oil refining through co-aromatization of various feeds in the petrochemical industry, and NG use in the upgrading of bio-derived fuels and discusses alternative uses of NG. In-depth chapters demonstrate uses for NG beyond heating homes, through catalysis and in-situ hydrogen donation, and its potential applications for the petrochemical and biofuel industries.

Download or read book Gaseous Carbon Waste Streams Utilization written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-02-22 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the quest to mitigate the buildup of greenhouse gases in Earth's atmosphere, researchers and policymakers have increasingly turned their attention to techniques for capturing greenhouse gases such as carbon dioxide and methane, either from the locations where they are emitted or directly from the atmosphere. Once captured, these gases can be stored or put to use. While both carbon storage and carbon utilization have costs, utilization offers the opportunity to recover some of the cost and even generate economic value. While current carbon utilization projects operate at a relatively small scale, some estimates suggest the market for waste carbon-derived products could grow to hundreds of billions of dollars within a few decades, utilizing several thousand teragrams of waste carbon gases per year. Gaseous Carbon Waste Streams Utilization: Status and Research Needs assesses research and development needs relevant to understanding and improving the commercial viability of waste carbon utilization technologies and defines a research agenda to address key challenges. The report is intended to help inform decision making surrounding the development and deployment of waste carbon utilization technologies under a variety of circumstances, whether motivated by a goal to improve processes for making carbon-based products, to generate revenue, or to achieve environmental goals.

Download or read book Hydrogen Production Technologies written by Mehmet Sankir and published by John Wiley & Sons. This book was released on 2017-03-20 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is organized in three parts. Part I shows how the catalytic and electrochemical principles involve hydrogen production technologies. Part II is devoted to biohydrogen production and introduces gasification and fast pyrolysis biomass, dark fermentation, microbial electrolysis and power production from algae. The last part of the book is concerned with the photo hydrogen generation technologies. Recent developments in the area of semiconductor-based nanomaterials, specifically semiconductor oxides, nitrides and metal-free semiconductors based nanomaterials for photocatalytic hydrogen production are extensively discussed in this part.

Download or read book Fischer Tropsch Technology written by André Steynberg and published by Elsevier. This book was released on 2004-10-30 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fischer-Tropsch Technology is a unique book for its state-of-the-art approach to Fischer Tropsch (FT) technology. This book provides an explanation of the basic principles and terminology that are required to understand the application of FT technology. It also contains comprehensive references to patents and previous publications. As the first publication to focus on theory and application, it is a contemporary reference source for students studying chemistry and chemical engineering. Researchers and engineers active in the development of FT technology will also find this book an invaluable source of information. * Is the first publication to cover the theory and application for modern Fischer Tropsch technology * Contains comprehensive knowledge on all aspects relevant to the application of Fischer Tropsch technology* No other publication looks at past, present and future applications

Download or read book Green Carbon Dioxide written by Gabriele Centi and published by John Wiley & Sons. This book was released on 2014-01-17 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROMISING NEW APPROACHES TO RECYCLE CARBON DIOXIDE AND REDUCE EMISSIONS With this book as their guide, readers will learn a variety of new approaches and methods to recycle and reuse carbon dioxide (CO2) in order to produce green fuels and chemicals and, at the same time, minimize CO2 emissions. The authors demonstrate how to convert CO2 into a broad range of essential products by using alternative green energy sources, such as solar, wind, and hydro-power as well as sustainable energy sources. Readers will discover that CO2 can be a driving force for the sustainable future of both the chemical industry and the energy and fuels industry. Green Carbon Dioxide features a team of expert authors, offering perspectives on the latest breakthroughs in CO2 recycling from Asia, Europe, and North America. The book begins with an introduction to the production of CO2-based fuels and chemicals. Next, it covers such topics as: Transformation of CO2 to useable products through free-radical-induced reactions Hydrogenation of CO2 to liquid fuels Direct synthesis of organic carbonates from CO2 and alcohols using heterogeneous oxide catalysts Electrocatalytic reduction of CO2 in methanol medium Fuel production from photocatalytic reduction of CO2 with water using TiO2-based nanocomposites Use of CO2 in enhanced oil recovery and carbon capture and sequestration More than 1,000 references enable readers to explore individual topics in greater depth. Green Carbon Dioxide offers engineers, chemists, and managers in the chemical and energy and fuel industries a remarkable new perspective, demonstrating how CO2 can play a significant role in the development of a sustainable Earth.

Download or read book Fundamentals of Petroleum Refining written by Mohamed A. Fahim and published by Elsevier. This book was released on 2009-11-19 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Petroleum Refining presents the fundamentals of thermodynamics and kinetics, and it explains the scientific background essential for understanding refinery operations. The text also provides a detailed introduction to refinery engineering topics, ranging from the basic principles and unit operations to overall refinery economics. The book covers important topics, such as clean fuels, gasification, biofuels, and environmental impact of refining, which are not commonly discussed in most refinery textbooks. Throughout the source, problem sets and examples are given to help the reader practice and apply the fundamental principles of refining. Chapters 1-10 can be used as core materials for teaching undergraduate courses. The first two chapters present an introduction to the petroleum refining industry and then focus on feedstocks and products. Thermophysical properties of crude oils and petroleum fractions, including processes of atmospheric and vacuum distillations, are discussed in Chapters 3 and 4. Conversion processes, product blending, and alkylation are covered in chapters 5-10. The remaining chapters discuss hydrogen production, clean fuel production, refining economics and safety, acid gas treatment and removal, and methods for environmental and effluent treatments. This source can serve both professionals and students (on undergraduate and graduate levels) of Chemical and Petroleum Engineering, Chemistry, and Chemical Technology. Beginners in the engineering field, specifically in the oil and gas industry, may also find this book invaluable. Provides balanced coverage of fundamental and operational topics Includes spreadsheets and process simulators for showing trends and simulation case studies Relates processing to planning and management to give an integrated picture of refining

Download or read book Fundamentals of Thermochemical Biomass Conversion written by R.P. Overend and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1155 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout the world many projects have been underway to investigate the conversion of renewable biomass into energy and synthetic fuels by thermo chemical methods such as combustion, pyrolysis, gasification and lique faction. While many of these represent prior art used during the early 20th century, the recent decade since the 1970s oil shock has immeasurably increased the knowledge base for such processes. Much of the new knowledge has been gained by persons who were not trained in classical wood chemistry and there have not yet been many attempts to synthesize the knowledge into a corpus of systematic information. To bring this about the International Energy Agency's Forestry Energy collaboration, the Gas Research Institute, the National Research Council of Canada and the US Department of Energy jointly sponsored a conference on the Fundamentals of Thermochemical Biomass Conversion in Estes Park, Colorado which was held on October 18-22, 1982. The Conference, which was structured around invited plenary papers and contributions from researchers, served as the basis for the papers in this volume which reflect the substantial conclusions of the Conference. During the planning for the Conference, it was realized by the editors in their capacity as Co-chairmen that a major problem in biomass research was the lack of reproducibility between reported experiments and their inter comparison on account of the heterogeneity of biomass materials. A well known wood chemist, George M.

Download or read book Natural Gas Conversion VI written by T.H. Fleisch and published by Elsevier. This book was released on 2001-06-01 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 6th Natural Gas Conversion Sumposium held in Alaska in June 2001. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings. The 6th Natural Gas Conversion Symposium is conducted under the overall direction of the Organizing Committee. The Program Committee was responsible for the review, selection, editing of most of the manuscripts included in this volum. A standing International Advisory Board has ensured the effective long-term planning and the continuity and technical excellence of these meetings.

Download or read book Biomass Utilization written by Wilfred Cote and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume represents the culmination of nearly three years of planning, organizing and carrying out of a NATO Ad vanced Study Institute on Biomass Utilization. The effort was initi ated by Dr. Harry Sobel, then Editor of Biosources Digest, and a steering committee representing the many disciplines that this field brings together. . When the fiscal and logistical details of the original plan could not be worked out, the idea was temporarily suspended. In the spring of 1982, the Renewable Materials Institute of the State University of New York at the College of Environmental Science and Forestry in Syracuse, New York revived the plan. A number of modifications had to be made, including the venue which was changed from the U.S.A. to Portugal. Additional funding beyond the basic support provided by the Scientific Affairs Division of NATO had to be obtained. Ul timately there were supplementary grants from the Foundation for Microbiology and the Anne S. Richardson Fund to assist student participants. The New York State College of Forestry Foundation, Inc. provided major support through the Renewable Ma terials Institute. The ASI was held in Alcabideche, Portugal from September 26 to October 9, 1982. Eighty participants including fifteen principal lecturers were assembled at the Hotel Sintra Estoril for the program that was organized as a comprehensive course on biomass utilization. The main lectures were supplemented by relevant short papers offered by the participants.

Download or read book CO2 Conversion and Utilization written by Chunshan Song and published by ACS Symposium. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the chemistry and processes for conversion and utilization of carbon dioxide. Topics include CO 2 utilization, its conversion to industrial chemicals and fuels, its coversion via synthesis gas, and new catalysts and chemical processes for conversion.

Download or read book The Role of Catalysis for the Sustainable Production of Bio fuels and Bio chemicals written by Kostas Triantafyllidis and published by Newnes. This book was released on 2013-03-19 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Role of Catalysis for the Sustainable Production of Bio-fuels and Bio-chemicals describes the importance of catalysis for the sustainable production of biofuels and biochemicals, focused primarily on the state-of-the-art catalysts and catalytic processes expected to play a decisive role in the "green" production of fuels and chemicals from biomass. In addition, the book includes general elements regarding the entire chain of biomass production, conversion, environment, economy, and life-cycle assessment. Very few books are available on catalysis in production schemes using biomass or its primary conversion products, such as bio-oil and lignin. This book fills that gap with detailed discussions of: Catalytic pyrolysis of lignocellulosic biomass Hybrid biogasoline by co-processing in FCC units Fischer-Tropsch synthesis to biofuels (biomass-to-liquid process) Steam reforming of bio-oils to hydrogen With energy prices rapidly rising, environmental concerns growing, and regulatory apparatus evolving, this book is a resource with tutorial, research, and technological value for chemists, chemical engineers, policymakers, and students. Includes catalytic reaction mechanism schemes and gives a clear understanding of catalytic processes Includes flow diagrams of bench-, pilot- and industrial-scale catalytic processing units and demonstrates the various process technologies involved, enabling easy selection of the best process Incorporates many tables, enabling easy comparison of data based on a critical review of the available literature

Download or read book Engineering Solutions for CO2 Conversion written by Tomas Ramirez Reina and published by John Wiley & Sons. This book was released on 2021-02-25 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide that offers a review of the current technologies that tackle CO2 emissions The race to reduce CO2 emissions continues to be an urgent global challenge. Engineering Solutions for CO2 Conversion offers a thorough guide to the most current technologies designed to mitigate CO2 emissions ranging from CO2 capture to CO2 utilization approaches. With contributions from an international panel representing a wide range of expertise, this book contains a multidisciplinary toolkit that covers the myriad aspects of CO2 conversion strategies. Comprehensive in scope, it explores the chemical, physical, engineering and economical facets of CO2 conversion. Engineering Solutions for CO2 Conversion explores a broad range of topics including linking CFD and process simulations, membranes technologies for efficient CO2 capture-conversion, biogas sweetening technologies, plasma-assisted conversion of CO2, and much more. This important resource: Addresses a pressing concern of global environmental damage, caused by the greenhouse gases emissions from fossil fuels Contains a review of the most current developments on the various aspects of CO2 capture and utilization strategies Incldues information on chemical, physical, engineering and economical facets of CO2 capture and utilization Offers in-depth insight into materials design, processing characterization, and computer modeling with respect to CO2 capture and conversion Written for catalytic chemists, electrochemists, process engineers, chemical engineers, chemists in industry, photochemists, environmental chemists, theoretical chemists, environmental officers, Engineering Solutions for CO2 Conversion provides the most current and expert information on the many aspects and challenges of CO2 conversion.

Download or read book Proceedings written by and published by . This book was released on 1980 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CO2 A Valuable Source of Carbon written by Marcello De De Falco and published by Springer Science & Business Media. This book was released on 2013-07-30 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the annual production of carbon Dioxide (CO2) reaches 30 billion tones, the growing issue of the greenhouse effect has triggered the development of technologies for CO2 sequestration, storage and use as a reactant. Collecting together the reports of the Congress at University of Rome (Campus Bio-medico) held 16th April 2012, CO2: A Valuable Source of Carbon presents and discusses promising technologies for the industrial exploitation of CO2. Divided into two parts, the current technology is evaluated and summarized before European and national projects are presented. The focus on CO2 recovery, particularly in value-added production, proposes applicable methods to develop sustainable practices and even to mitigate greenhouse gas emission from large-scale fossil fuels usage. Including current data and real-world examples, CO2: A valuable source of carbon provides students, engineers, researchers and industry professional with up-to-date material and potential areas for development and research.

Download or read book Industrial Biorefineries and White Biotechnology written by Ashok Pandey and published by Elsevier. This book was released on 2015-05-08 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Biorefineries and White Biotechnology provides a comprehensive look at the increasing focus on developing the processes and technologies needed for the conversion of biomass to liquid and gaseous fuels and chemicals, in particular, the development of low-cost technologies. During the last 3-4 years, there have been scientific and technological developments in the area; this book represents the most updated information and technological perspective on the topic. Provides information on the most advanced and innovative pretreatment processes and technologies for biomass Covers information on lignocellulosic and algal biomass to work on the principles of biorefinery Provides information on integration of processes for the pretreatment of biomass Designed as a textbook for both graduate students and researchers

Download or read book Recent Advances in Bioconversion of Lignocellulose to Biofuels and Value Added Chemicals within the Biorefinery Concept written by Edivaldo Ximenes Ferreira Filho and published by Elsevier. This book was released on 2020-05-07 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Advances in Bioconversion of Lignocellulose to Biofuels and Value Added Chemicals within the Biorefinery Concept covers the latest developments on biorefineries, along with their potential use for the transformation of residues into a broad range of more valuable products. Within this context, the book discusses the enzymatic conversion process of lignocellulosic biomass to generate fuels and other products in a unified approach. It focuses on new approaches to increase enzymatic production by microorganisms, the action of microbial inhibitors, and strategies for their removal. Furthermore, it outlines the benefits of this integrated approach for generating value-added products and the benefits to social and economic aspects, circular bio economy, HUBs and perspectives. Covers the mechanisms of enzymatic conversion of biomass into value-added products Discusses bioproducts derived from lignocellulose and their applications Includes discussions on design, development and the technologies needed for the sustainable manufacture of materials and chemicals Offers a techno-economic evaluation of biorefineries for integrated sustainability assessments Discusses the socioeconomic and cultural-economic perspectives of the lignocellulosic biorefinery Presents a virtual biorefinery as an integrated approach to evaluate the lignocellulose production chain

Download or read book Biomass Volume Estimation and Valorization for Energy written by Jaya Shankar Tumuluru and published by BoD – Books on Demand. This book was released on 2017-02-22 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outcome of contributions by many experts in the field from different disciplines, various backgrounds, and diverse expertise. This book provides information on biomass volume calculation methods and biomass valorization for energy production. The chapters presented in this book include original research and review articles. I hope the research presented in this book will help to advance the use of biomass for bioenergy production and valorization. The key features of the book are: Providing information on biomass volume estimation using direct, nondestructive and remote sensing methods Biomass valorization for energy using thermochemical (gasification and pyrolysis) and biochemical (fermentation) conversion processes.