Download or read book Biomass and Carbon Fuels in Metallurgy written by Jaroslav Legemza and published by CRC Press. This book was released on 2019-12-19 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass and Carbon Fuels in Metallurgy presents contemporary and new insights into the use of carbonaceous (Biomass) fuels in the metallurgical sector. The authors describe application of these fuels in different technological processes to produce pig iron, steel and ferroalloys. Emphasis is placed on biomass and its metallurgical utilization. Coverage includes the specification of fuels, their classification and the characteristics of their basic properties. The use of carbonaceous fuels in the production of various kinds of agglomerates (ferriferous, manganese and metalized) is also covered. Key Features: Provides a comprehensive view of carbonaceous fuels in various metallurgy processes Details experiments conducted on the use of traditional and alternative (biomass) carbonaceous fuels for the production of agglomerates. Demonstrates that the energy potential of biomass can also be successfully used in pyrometallurgical processes Describes applications of biomass-based fuels in different technological processes for the production of pig iron, steel and ferroalloys. Coverage includes the specification of fuels, their classification and the characteristics of their basic properties.

Download or read book The Metallurgy of Nuclear Fuel written by V. S. Yemel'Yanov and published by Elsevier. This book was released on 2013-10-22 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Metallurgy of Nuclear Fuel: Properties and Principles of the Technology of Uranium, Thorium and Plutonium is a systematic analysis of the metallurgy of nuclear fuel, with emphasis on the physical, mechanical, and chemical properties as well as the technology of uranium, thorium, and plutonium, together with their alloys and compounds. The minerals and raw material sources of nuclear fuel are discussed, along with the principles of the technology of the raw material processing and the production of the principal compounds, and of the pure metals and alloys. Comprised of three parts, this volume begins with an introduction to the history of the discovery of uranium and its position in the periodic system; its use as a nuclear fuel; radioactivity and isotopic composition; alloys and compounds; and physical, mechanical, and chemical properties. The effect of mechanical and thermal treatment, thermal cycling and irradiation on the physicochemical properties of uranium is also examined. The next two sections are devoted to thorium and plutonium and includes chapters dealing with their uses, alloys and compounds, and methods of recovery and purification. This book is written for university students, but should also prove useful to young production engineers and scientific workers who are concerned with problems in the metallurgy of nuclear fuel.

Download or read book Metals Energy and Sustainability written by Barry Golding and published by Springer. This book was released on 2017-02-26 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains how and where copper and fossil fuels were formed and the likely future for the extraction of copper and coal. The colourful chronology of our efforts to extract metals from minerals and energy from fossil fuels is presented from earliest times until the present day. The difficult concept of human sustainability is examined in the context of continually decreasing real prices of energy and metals. This book integrates the latest findings on our historic use of technology to continually produce cheaper metals even though ore grades have been decreasing. Furthermore, it shows that the rate of technological improvement must increase if metals are to be produced even more cheaply in the future.

Download or read book Fuels Furnaces and Refractories written by J. D. Gilchrist and published by Elsevier. This book was released on 2013-10-22 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuels, Furnaces and Refractories focuses on the sources and efficient use of energy available to modern industry. This book begins with the classification, properties, tests, and different kinds of fuels, as well as trends in fuel utilization. This text also tackles the generation and distribution of electricity from both chemical and nuclear energy sources. Subsequent chapters focus on the thermodynamics, physics, chemistry, and kinetics of combustion of fuels; the burner design; the heat transfer and flow of gases through furnaces and flues; and ways of controlling energy supply rates and temperatures. The refractory materials, which are heat-resisting substances, are also described.

Download or read book Structural Alloys for Nuclear Energy Applications written by Robert Odette and published by Newnes. This book was released on 2019-08-15 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-performance alloys that can withstand operation in hazardous nuclear environments are critical to presentday in-service reactor support and maintenance and are foundational for reactor concepts of the future. With commercial nuclear energy vendors and operators facing the retirement of staff during the coming decades, much of the scholarly knowledge of nuclear materials pursuant to appropriate, impactful, and safe usage is at risk. Led by the multi-award winning editorial team of G. Robert Odette (UCSB) and Steven J. Zinkle (UTK/ORNL) and with contributions from leaders of each alloy discipline, Structural Alloys for Nuclear Energy Applications aids the next generation of researchers and industry staff developing and maintaining steels, nickel-base alloys, zirconium alloys, and other structural alloys in nuclear energy applications. This authoritative reference is a critical acquisition for institutions and individuals seeking state-of-the-art knowledge aided by the editors' unique personal insight from decades of frontline research, engineering and management. - Focuses on in-service irradiation, thermal, mechanical, and chemical performance capabilities. - Covers the use of steels and other structural alloys in current fission technology, leading edge Generation-IV fission reactors, and future fusion power reactors. - Provides a critical and comprehensive review of the state-of-the-art experimental knowledge base of reactor materials, for applications ranging from engineering safety and lifetime assessments to supporting the development of advanced computational models.

Download or read book A Manual of Metallurgy Fuel iron steel tin antimony arsenic bismuth and platinum written by William Henry Greenwood and published by . This book was released on 1874 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Storage Stability of Fuels written by Krzysztof Biernat and published by BoD – Books on Demand. This book was released on 2015-02-04 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an analysis of the results of studies of motor fuels ageing, conducted in laboratory and model conditions, in terms of building a system operating on-line, allowing continuous assessment of the operational usability of gasoline and diesel fuels, including those containing the addition of ethanol and FAME, respectively. This research was carried out in the framework of the project: "A system for the continuous control of the degree and rate of the liquid fuels ageing process during storage, which received co-funding from the European Regional Development Fund under the Operational Programme "Innovative Economy". The book presents an evaluation of the impact of fuel production processes on its stability and an analysis of changes in normative parameters of fuels during their storage and use. The book presents also the results of tests on the corrosive effects of fuels during storage processes. This project was co-financed by the European Regional Development Fund under the Operational Programme "Innovative Economy".

Download or read book FUELS FURNACES AND REFRACTORIES written by GUPTA, R. C and published by PHI Learning Pvt. Ltd.. This book was released on 2016-01-02 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in a student-friendly manner, the book begins with the introduction to fuels, furnaces and refractories. It further exposes the reader to the different types of fuels with their testing methods. Besides covering the recent developments in the field of non-recovery coke ovens, dry coke cooling, use of coal in DRI and blast furnace, and new energy recovery system, the book also covers all the aspects of refractory systems. For better understanding of the text, the book includes a large number of illustrations. The book also facilitates a thorough understanding of different environmental issues associated with the use of fuel. Finally, the reader is made familiar with the Indian industrial scenario regarding fuels, furnaces and refractories.

Download or read book Comprehensive Nuclear Materials written by Todd R Allen and published by Elsevier. This book was released on 2011-05-12 with total page 3552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Nuclear Materials, Five Volume Set discusses the major classes of materials suitable for usage in nuclear fission, fusion reactors and high power accelerators, and for diverse functions in fuels, cladding, moderator and control materials, structural, functional, and waste materials. The work addresses the full panorama of contemporary international research in nuclear materials, from Actinides to Zirconium alloys, from the worlds' leading scientists and engineers. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environment Fully integrated with F-elements.net, a proprietary database containing useful cross-referenced property data on the lanthanides and actinides Details contemporary developments in numerical simulation, modelling, experimentation, and computational analysis, for effective implementation in labs and plants

Download or read book Fuel and Energy Use in the Soviet Metallurgy Industries written by Matthew J. Sagers and published by . This book was released on 1987 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transactions of the American Institute of Mining Metallurgical and Petroleum Engineers written by American Institute of Mining, Metallurgical, and Petroleum Engineers and published by . This book was released on 1902 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some vols., 1920-1949, contain collections of papers according to subject.

Download or read book Nanotechnology in Oil and Gas Industries written by Tawfik Abdo Saleh and published by Springer. This book was released on 2017-10-06 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a powerful source to develop new, rapid and highly efficient materials for the application in various fields of oil and gas. It focuses on the synthesis, characterization and applications of various Nanomaterials, presenting the state-of-the-art in developments and innovations in nanocomposites. This book provides the complete practical and theoretical information about the synthesis of nanoparticles with potential use in the field of oil and gas.

Download or read book The Metallurgy of Iron and Steel written by Bradley Stoughton and published by . This book was released on 1923 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The ECPH Encyclopedia of Mining and Metallurgy written by Xu Kuangdi and published by Springer Nature. This book was released on with total page 2429 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy in Minerals and Metallurgical Industries written by and published by Allied Publishers. This book was released on 2005 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Metallurgy of Zirconium written by David Leslie Douglass and published by . This book was released on 1971 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Technology for the Conversion of Waste into Fuels and Chemicals written by Anish Khan and published by Woodhead Publishing. This book was released on 2021-07-27 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Technology for the Conversion of Waste into Fuels and Chemicals: Volume 1: Biological Processes presents advanced and combined techniques that can be used to convert waste to energy, including combustion, gasification, paralysis, anaerobic digestion and fermentation. The book focuses on solid waste conversion to fuel and energy and presents the latest advances in the design, manufacture, and application of conversion technologies. Contributors from the fields of physics, chemistry, metallurgy, engineering and manufacturing present a truly trans-disciplinary picture of the field. Chapters cover important aspects surrounding the conversion of solid waste into fuel and chemicals, describing how valuable energy can be recouped from various waste materials. As huge volumes of solid waste are produced globally while huge amounts of energy are produced from fossil fuels, the technologies described in this comprehensive book provide the information necessary to pursue clean, sustainable power from waste material. - Presents the latest advances in waste to energy techniques for converting solid waste to valuable fuel and energy - Brings together contributors from physics, chemistry, metallurgy, engineering and the manufacturing industry - Includes advanced techniques such as combustion, gasification, paralysis, anaerobic digestion and fermentation - Goes far beyond municipal waste, including discussions on recouping valuable energy from a variety of industrial waste materials - Describes how waste to energy technologies present an enormous opportunity for clean, sustainable energy