Download or read book Metallurgy Technology and Materials III written by K.B.R. Varma and published by Trans Tech Publications Ltd. This book was released on 2014-06-19 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Metallurgy Technology and Materials (ICMTM2014), April 25-26, 2014, Kunming, China. The 58 papers are grouped as follows: Chapter 1: Advanced Materials Science, Chapter 2: Materials Processing Technology, Chapter 3: Metallurgical and Mining Engineering, Chapter 4: Applied Mechanics, Mechanical Engineering and Information Technologies
Download or read book Metallurgy Technology and Materials III written by and published by . This book was released on 2014 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Metallurgy Technology and Materials (ICMTM2014), April 25-26, 2014, Kunming, China.The 58 papers are grouped as follows: Chapter 1: Advanced Materials Science, Chapter 2: Materials Processing Technology,Chapter 3: Metallurgical and Mining Engineering,Chapter 4: Applied Mechanics, Mechanical Engineering and Information Technologies Keyword: Metallurgical, Physical Chemistry, Surface chemistry, Mining Engineering, steel and iron processing, Advanced Materials Science, Materials Processing Technology, Electrical Engineering, Vehicle and Moto, Simulation and Information Systems These proceedings contain 58 papers from the 2014 3rd International Conference on Metallurgy Technology and Materials (ICMTM 2014), held in April 2014 in Kunming, China. Topics include advanced materials science, materials processing technology, metallurgical and mining engineering, and applied mechanics, mechanical engineering, and information technologies, with papers contributed by engineers and others from Asia. -- Materials science-- Mechanical engineering-- Metals-- Mining.
Download or read book Powder Metallurgy written by Anish Upadhyaya and published by Universities Press. This book was released on 2018-08-16 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1920s, modern powder metallurgy has been used to produce a wide range of structural powder metallurgy components, self-lubricating bearings, and cutting tools. The conventional method involves the production of metal powders and the manufacture of useful objects from such powders by die compaction and sintering. Powder injection molding permits the production of stronger, more uniform, and more complex powder metallurgy parts. A detailed discussion of powder metallurgy materials and products is given in this book. Worked examples, exercises, questions, and problems are included in each chapter.
Download or read book Metallurgy Technology and Materials II written by K.B.R. Varma and published by Trans Tech Publications Ltd. This book was released on 2013-09-10 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Collection of selected, peer reviewed papers from the 2013 2nd International Conference on Metallurgy Technology and Materials (ICMTM 2013), June 25-26, 2013, Hong Kong, China. The 108 papers are grouped as follows: Chapter 1: Metallurgy Technologies and Materials, Manufacturing Engineering; Chapter 2: Minerals and Mining Engineering; Chapter 3: Advanced Materials Science and Technologies; Chapter 4: Materials Processes Technology.
Download or read book Metallurgy Technology and Materials written by Tony Sun and published by Trans Tech Publications Ltd. This book was released on 2012-09-28 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of ICMTM 2012 was to present the latest research results of scientists and engineers in the fields of Metallurgy, Mining Engineering, Advanced Materials Science and Materials Processing Technology. The peer-reviewed papers are grouped into chapters: 1 - Advanced Materials and Technology in Metallurgy; 2 - Materials Engineering and Production Technologies.
Download or read book Extractive Metallurgy 1 written by Alain Vignes and published by John Wiley & Sons. This book was released on 2013-03-28 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the processes of mineral transformation, recycling and reclamation of metals, for the purpose of turning metals and alloys into a liquid state ready for pouring. Even though "process metallurgy" is one of the oldest technologies implemented by man, technological innovation, with the development of processes that are both focused on product quality and economically and ecologically efficient, continues to be at the heart of these industries. This book explains the physico-chemical bases of transformations, vital to their understanding and control (optimization of operational conditions), and the foundations in terms of "process engineering" (heat and matter assessment, process coupling: chemical reactions and transport phenomena), vital to the optimal execution and analysis of transformation process operations. This book is addressed to students in the field of metallurgy and to engineers facing the problem of metal and alloy development (operation of an industrial unit or development of a new process).
Download or read book Metallurgy Technology and Materials VIII written by Nor Sabirin Mohamed and published by Trans Tech Publications Ltd. This book was released on 2021-03-15 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed full text papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020) Selected, peer-reviewed papers from the 8th International Conference on Metallurgy Technology and Materials (ICMTM 2020), August 1-2, 2020, Xian, China
Download or read book Magnesium Technology written by Horst E. Friedrich and published by Springer Science & Business Media. This book was released on 2006 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the authors present the current state of both research and technological application of magnesium. In particular, casting and wrought alloys are presented in Chapter 5, followed by a large chapter dedicated to fabrication methods. Corrosion and Protection are treated in Chapter 7. Chapter 8 discusses Engineering Requirements, Strategies and Examples for automobiles in Europe, USA, Asia and Pacific and also for Aerospace and Consumer Articles. Chapter 10 is dedicated to recycling. The experience of authors from seven countries has been combined to produce this book. The book addresses materials researchers as well as design engineers. TOC:Introduction.- History.- Production Technologies.- Physical Metallurgy.- Melting, Alloying and Refining.- Alloys of Practical Importance.- Fabrication Methods.- Corrosion and Surface Protection.- Engineering Requirements, Strategies and Examples.- Recycling.- Data Sheet.
Download or read book Powder Metallurgy Technology written by G. S. Upadhyaya and published by Cambridge Int Science Publishing. This book was released on 1997 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Contents1 INTRODUCTION; 2 METAL POWDER PRODUCTION; 3 METAL POWDER CHARACTERISTICS; 4 METAL POWDER TRE-AMENT; 5 METAL POWDER COMPACT-ION; 6 SINTERING; 7 HOT CONSOLIDATION; 8 SECONDARY TREATMENT; 9 POWDER INJECTION MOULDING; 10 QUALITY CONTROL OF POWDER METALLURGY MATERIALS.
Download or read book Powder Metallurgy Technology and Equipment Selected Topics written by Gopal S. Upadhyaya and published by Trans Tech Publications Ltd. This book was released on 2012-01-03 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). Powder metallurgy is one of the leading processes used for forming engineering components. The technology, as developed at the beginning of the 20th century, has since advanced significantly from both the materials and energy-conservation points of view. Novel, and automated, equipment has played a significant role in enhancing the growth of the powder metallurgy industry. The present work includes, in addition to the editors introductory paper, eleven invited papers from organizations of international repute. In brief, the book presents expert assessments from the major metal-powder and powder-metallurgy equipment-makers in the world. This distinguishes it from other works, which are contributed mainly by academics. The book concentrates on particular topics of interest and does not attempt to be comprehensive.
Download or read book Metallurgy Technology and Materials VI written by Mohamed Nor Sabirin and published by Trans Tech Publications Ltd. This book was released on 2018-08-17 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers presented during the 6th International Conference on Metallurgy Technology and Materials (ICMTM2018) which was held on 30-31 May 2018 in Xian, China. This collection contains the research results in the area of the structural materials, metallurgical technologies, polymers and modern composites, functional ceramics, technologies of coatings and surface engineering, nanomaterials for the various applications, chemical technologies in the ore processing and bio-production, building materials. We hope that this volume will be useful and interesting for the wide range of academics, engineers and students.
Download or read book Thermo Mechanical Processing of Metallic Materials written by Bert Verlinden and published by Elsevier. This book was released on 2007-06-07 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-Mechanical Processing of Metallic Materials describes the science and technology behind modern thermo-mechanical processing (TMP), including detailed descriptions of successful examples of its application in the industry. This graduate-level introductory resource aims to fill the gap between two scientific approaches and illustrate their successful linkage by the use of suitable modern case studies. The book is divided into three key sections focusing on the basics of metallic materials processing. The first section covers the microstructural science base of the subject, including the microstructure determined mechanical properties of metals. The second section deals with the current mechanical technology of plastic forming of metals. The concluding section demonstrates the interaction of the first two disciplines in a series of case studies of successful current TMP processing and looks ahead to possible new developments in the field. This text is designed for use by graduate students coming into the field, for a graduate course textbook, and for Materials and Mechanical Engineers working in this area in the industry. * Covers both physical metallurgy and metals processing * Links basic science to real everyday applications * Written by four internationally-known experts in the field
Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.
Download or read book Metallurgy Technology and Materials IX written by Nor Sabirin Mohamed and published by Trans Tech Publications Ltd. This book was released on 2022-04-12 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed full text papers from the 9th International Conference on Metallurgy Technology and Materials (ICMTM 2021) Selected peer-reviewed full text papers from the 9th International Conference on Metallurgy Technology and Materials (ICMTM 2021), October 28-29, 2021, Zhengzhou, China
Download or read book Powder Metallurgy Technology and Equipment written by Gopal S. Upadhyaya and published by . This book was released on 2012 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Technology of Metallurgy written by William K. Dalton and published by Prentice Hall. This book was released on 1994 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: For first courses in metallurgy and materials science. Here is a straightforward, clearly-written introduction whose three-part organization makes an understanding of metals-and how they "work" truly accessible. Text coverage encompasses principles, applications, and testing. The Technology of Metallurgy focuses on providing students with an understanding of the fundamentals of metals, and of what happens when they are cold worked, heat treated, and alloyed. Mathematics is limited to algebra and trigonometry; calculus is used only when necessary for understanding. For courses with a laboratory component, appendixes provide background concepts for conducting basic tests; and the accompanying Instructor's Manual contains outlines for laboratory sessions.
Download or read book Metallurgy Technology and Materials V written by Zawati Harun and published by Trans Tech Publications Ltd. This book was released on 2017-08-22 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: 5th ICMTM Selected, peer reviewed papers from the 5th International Conference on Metallurgy Technology and Materials (ICMTM 2017), April 15-16, 2017, Xiamen, China
