Download or read book Metallographic Researches written by Carl Axel Fredrik Benedicks and published by . This book was released on 1926 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallographic Researches written by Carl Axel Fredrik Benedicks and published by . This book was released on 1926 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography in Failure Analysis written by J. McCall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailed analyses of failures of material components have proved to be valuable in many ways; by preventing further failures, by assessing the validity of designs and the selection of materials, by uncovering shortcomings in the processing of the materials in volved through characterizations of defects, and by revealing problems introduced during the manufacture or fabrication of the component. Increased recognition of the value of performing failure analyses has caused the field to develop into a very active area of tech nical endeavor. Failure analysis has been employed in numerous different technical dis ciplines and has proven beneficial. The increased activity has caused many new and im proved methods for performing these analyses to be developed. Among these are many methods which can be characterized as generally belonging to the field of metallography. In recognition of the important role that metallography plays in the performance of failure analyses, the absence of a text that specifically discusses this subject, and the be lief that communication of information on the subject would be of technical interest, The American Society for Metals and The International Metallographic Society co sponsored a symposium. The intent was to bring together world-recognized authorities working in various aspects of the failure analysis and metallographic fields to share meth ods they use, results they have obtained, and the purposes to which they utilized these results. The symposium, entitled "Metallography in Failure Analysis", was held in Hous ton, Texas, USA, July 17-18, 1977.
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Metallographic Specimen Preparation written by J. McCall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: /.letallography is much more than taking striking pictures at high magnifications or polishing and etching specimens in such a way that no scratches can be seen. Basically, metallography is the physical metallurgist's most useful and most used tool for studying metals. Although it is perhaps his oldest tool, it certainly is not likely to become obsolete. Rather, the continued demands that have been placed upon materials have required more detailed charac terizations of their microstructures and this, in turn, has re quired the metallographer to develop new techniques to make these characterizations. Not too many years ago, the metallographer had only optical microscopes with which to examine his specimens. Now he has elec tron microscopes, scanning electron microscopes, and a whole host of instruments which were unknown to him only a relatively few years ago. This has forced him to learn not only how to use these new instruments and how to interpret the information that they provide but it also has made him develop new techniques for preparing the samples for examination.
Download or read book Metallography in Archaeology and Art written by David A. Scott and published by Springer Nature. This book was released on 2019-08-30 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the metallographic study of ancient metals. Metallography is important both conceptually as a microstructural science and in terms of its application to the study of ancient and historic metals. Metallography is a well-established methodology for the characterization of the microstructure of metals, which continues to be significant today in quality control and characterization of metallic properties. Not only does the metallographic examination of ancient metals present its own challenges in terms of sample size and interpretation of evidence, but it must be integrated with archaeological data and cultural research in order to obtain the most meaningful results. Issues of authentication and the establishment of fakes and forgeries of metallic artefacts often involve metallographic evidence of both metal and patina or corrosion interface, as an essential component of such a study. The present volume sets out the basic features of relevant metallic systems, enhanced with a series of examples of typical microstructural types, with illustrative case studies and examples throughout the text derived from studies undertaken by the two authors. This book provides a comprehensive presentation of metallography for archaeologists, archaeometallurgists, conservators, conservation scientists and metallurgists of modern materials.
Download or read book Metallography of Steels Interpretation of Structure and the Effects of Processing written by Hubertus Colpaert and published by ASM International. This book was released on 2018-08-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Download or read book Preliminary Metallographic Studies of Ball Fatigue Under Rolling contact Conditions written by H. Robert Bear and published by . This book was released on 1957 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: The metallurgical results produced on balls tested in the rolling-contact fatigue spin rig were studied by metallographic examination. Origin and progression of fatigue failures were observed. These evaluations were made on SAE 52100 and AISI M-1 balls fatigue tested at room temperature (80 F) and 200 to 250 F. Most failures originated subsurface in shear; inclusions, structure changes, and directionalism adversely affected ball fatigue life. Structures in the maximum-shear-stress region of the balls of both materials were stable at room temperature and unstable at 200 to 250 F. Failures were of the same type as those found in full-scale bearings.
Download or read book Metallographic Researches Based on a Course of Lectures Delivered in the United States in 1925 written by C. Benedicks and published by . This book was released on 1926 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography written by Cecil Henry Desch and published by . This book was released on 1922 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundry Metallography written by Alan Robert Bailey and published by . This book was released on 1971 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography Principles and Practice written by George F. Vander Voort and published by ASM International. This book was released on 1999-01-01 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers a comprehensive source of information on metallographic techniques and their application to the study of metals, ceramics, and polymers. It contains an extensive collection of micro- and macrographs.
Download or read book An Introduction to the Study of Metallography and Macrography written by Leon Guillet and published by Alpha Edition. This book was released on 2019-11 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from An Introduction to the Study of Metallography and Macrography Metallography may be defined as the microscopical study of polished and etched metallurgical specimens. The examination is carried out not by transmitted light as in the case of many histological and petrological specimens, but. By reflected light; one face of the metal specimen is perfectly polished, then etched by a suitable reagent having a differential effect on the various constituents, and finally examined under the microscope at varying magnifications up to, and in special instances exceeding, one thousand diameters. Macrography may be defined as the study of coarsely polished and etched metallurgical specimens without the aid of a microscope. It is especially useful in the detection of certain qualities or defects, and also enables a general estimation of the constitution of the material to be made. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Field Metallography Failure Analysis and Metallography written by International Metallographic Society. Technical Meeting and published by American Society of Civil Engineers. This book was released on 1987 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Engineering Index Annual for written by and published by . This book was released on 1912 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book An Introduction to the Study of Metallography and Macrography Classic Reprint written by Leon Guillet and published by Forgotten Books. This book was released on 2018-02-08 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from An Introduction to the Study of Metallography and Macrography Metallography may be defined as the microscopical study of polished and etched metallurgical specimens. The examination is carried out not by transmitted light as in the case of many histological and petrological specimens, but. By reflected light; one face of the metal specimen is perfectly polished, then etched by a suitable reagent having a differential effect on the various constituents, and finally examined under the microscope at varying magnifications up to, and in special instances exceeding, one thousand diameters. Macrography may be defined as the study of coarsely polished and etched metallurgical specimens without the aid of a microscope. It is especially useful in the detection of certain qualities or defects, and also enables a general estimation of the constitution of the material to be made. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
