Download or read book Metallization of Polymers 2 written by Edward Sacher and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the demands put on the polymer/metal interface, particularly by the microelectronics industry, become more and more severe, the necessity for understanding this interface, its properties and its limitations, becomes more and more essential. This requires a broad knowledge of, and a familiarity with, the latest findings in this rapidly advancing field. At the very least, such familiarity requires an exchange of infonnation, particularly among those intimately involved in this field. Communications among many of us in this area have made one fact quite obvious: the facilities provided by existing organizations, scientific and otherwise, do not offer the forum necessary to accomplish this exchange of infonnation. It was for this reason that Jean-Jacques Pireaux, Steven Kowalczyk and I organized the first Metallization of Polymers, a symposium sponsored by the American Chemical Society, which took place in Montreal, September 25-28, 1989; the Proceedings from that symposium were published as ACS Symposium Series 440, (1990). It is this same per ceived lack of a proper forum, and the encouragement of my colleagues, that prompted me to organize this meeting, so as to bring to the attention of the participants new instruments, materials, methods, advances, and, particularly, thoughts in the field of polymer metalliza tion. The meeting was designed as a workshop, with time being made available throughout for discussion and for the consideration of new findings.
Download or read book Metallized Plastics 2 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the aegis of the Dielectric Science and Technology Division of the Electrochemical Society in Montreal, Canada, May 7-10, 1990. The first symposium on this topic was held in Chicago, October 10-12, 1988 and the proceedings of l which have been chronicled in a hard-bound volume l As pointed out in the Preface to the proceedings of the first symposium the metallized plastics find scores of applications ranging from very mundane to very sophisticated. Even a cursory look at the literature will convince that this field has sprouted; and there is every reason to believe that with all the research and development activities taking place, new and exciting applications of metallized plastics will emerge. The program for the second symposium was very comprehensive as it included 46 papers covering many aspects of metallized plastics. This symposium was a testimonial to the brisk research activity and keen interest in the topic of metallized plastics. The success of this symposium reinforced our earlier belief that there was a definite need to hold symposia on this topic on a regular basis. Concomitantly, the third symposium in this vein was held in Phoenix, Arizona, October 13-18, 1991 and the fourth is planned for May 16-21, 1993 in Honolulu, Hawaii. As regards the present volume, it contains a total of 35 papers covering a variety of topics ranging from very fundamental to very applied.
Download or read book Polyimides and Other High Temperature Polymers Synthesis Characterization and Applications volume 2 written by Kash L. Mittal and published by CRC Press. This book was released on 2003-03-01 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second International Symposium on Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications, held in Newark, New Jersey, December 3-6, 2001. Polyimides possess many desirable attributes, so this class of materials has found applications in many technologies ranging from
Download or read book Melallization sic of Polymers written by and published by . This book was released on 1990 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallized and Magnetic Polymers written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the chemistry of metallized and magnetic polymers, as well as the special applications of these materials. After an introductory section on the general aspects of the field, the types and uses of these polymers are detailed, followed by an overview of the testing methods. The book is divided equally into two parts – metallized polymers and magnetic polymers – and both parts follow the same structure: All methods of fabrication Properties and methods of measurement including standard test methods and interface properties Fields of applications Environmental issues including recycling and biodegradable polymers
Download or read book Diffusion Processes in Advanced Technological Materials written by Devendra Gupta and published by William Andrew. This book was released on 2004-12-31 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new game book for understanding atoms at play aims to document diffusion processes and various other properties operative in advanced technological materials. Diffusion in functional organic chemicals, polymers, granular materials, complex oxides, metallic glasses, and quasi-crystals among other advanced materials is a highly interactive and synergic phenomenon. A large variety of atomic arrangements are possible. Each arrangement affects the performance of these advanced, polycrystalline multiphase materials used in photonics, MEMS, electronics, and other applications of current and developing interest. This book is written by pioneers in industry and academia for engineers, chemists, and physicists in industry and academia at the forefront of today's challenges in nanotechnology, surface science, materials science, and semiconductors.
Download or read book Polymer Surface Modification Relevance to Adhesion Volume 5 written by Kash L. Mittal and published by CRC Press. This book was released on 2009-03-16 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of polymer surface modification is of tremendous contemporary interest because of its critical importance in many and varied technological applications where polymers are used. Currently there is brisk research activity in unraveling the mechanisms of surface modification and finding ways to prolong the life of surface treatment. Also the
Download or read book Polyimides and Other High Temperature Polymers Synthesis Characterization and Applications written by Kash L. Mittal and published by CRC Press. This book was released on 2007-07-10 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is mostly based on papers presented at the Fourth International Symposium on this topic held in Savannah, Georgia. However, in addition to these papers, certain very relevant papers have also been included to broaden the scope and thus enhance the value of this book. Currently there is tremendous interest in these material because of their unique properties and applications in diverse technological areas ranging from microelectronics to aerospace to adhesive bonding. This book is divided into three parts: Part 1: Synthesis and Bulk Characterization; Part 2: Surface and Interface Aspects (Composites and Metallization); and Part 3: Applications. The topics covered include: synthesis of a number of polyimides with tailored properties; nanocomposites for high-performance applications; molecular assembly of polyimides; polyimide L-B films; metallization of polyimides; applications of high temperature polymers as proton exchange membranes; dielectrics, and in textile.
Download or read book Metallized Plastics 7 Fundamental and Applied Aspects written by Kash L. Mittal and published by CRC Press. This book was released on 2020-04-12 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the 7th Symposium on Metallized Plastics: Fundamental and Applied Aspects, held in Newark, New Jersey, December 2-3, 1999. This volume contains a total of 16 papers, which were all rigorously peer reviewed and suitably revised before inclusion. The book is divided into two parts: Metallization Techniques and Properties of Metal Deposits, and Interfacial and Adhesion Aspects. The topics covered include: various metallization techniques for a variety of plastics including some novel developments involving suitable plastic pretreatments; modification of polymers by plasma and ion-assisted reactions; metal doped plasma polymer films; metal-polyimide nanocomposite films; investigation of metal/polymer interactions by a variety of techniques; ways to improve adhesion of metal/polymer systems; modeling of metal/polymer interfaces; application of surface analytical techniques in the arena of metallized plastics; and ultrathin films on metal surfaces. This volume offers a wealth of information and represents current commentary on the R&D activity taking place in the technologically highly important field of metallized plastics and is of value and interest to anyone interested in the fundamental or applied aspects of metallized plastics.
Download or read book Surface and Interface Science Volumes 5 and 6 written by Klaus Wandelt and published by John Wiley & Sons. This book was released on 2016-03-14 with total page 1532 pages. Available in PDF, EPUB and Kindle. Book excerpt: In eight volumes, Surface and Interface Science covers all fundamental aspects and offers a comprehensive overview of this research area for scientists working in the field, as well as an introduction for newcomers. Volume 5: Solid-Gas Interfaces I Topics covered: Basics of Adsorption and Desorption Surface Microcalorimetry Adsorption of Rare Gases Adsorption of Alkali and Other Electro-Positive Metals Halogen adsorption on metals Adsorption of Hydrogen Adsorption of Water Adsorption of (Small) Molecules on Metal Surfaces Surface Science Approach to Catalysis Adsorption, Bonding and Reactivity of Unsaturated and Multifunctional Molecules Volume 6: Solid-Gas Interfaces II Topics covered: Adsorption of Large Organic Molecules Chirality of Adsorbates Adsorption on Semiconductor Surfaces Adsorption on Oxide Surfaces Oscillatory Surface Reactions Statistical Surface Thermodynamics Theory of the Dynamics at Surfaces Atomic and Molecular Manipulation
Download or read book Macromolecule Metal Complexes written by Francesco Ciardelli and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first concise overview on the topic, spanning the spectrum from fundamentals to new application areas. The synthesis, kinetics and thermodynamics of these complexes are covered in detail, while much emphasis is placed on special properties such as gas transport, charge transport, catalysis and light-induced processes. Furthermore, the authors treat the actual working areas for new application methods. In all, a very helpful tool for polymer and materials scientists, as well as organic and physical chemists working in these fields.
Download or read book Laser Surface Modification and Adhesion written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2014-09-18 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a unique overview on laser techniques and applications for the purpose of improving adhesion by altering surface chemistry and topography/morphology of the substrate. It details laser surface modification techniques for a wide range of industrially relevant materials (plastics, metals, ceramics, composites) with the aim to improve and enhance their adhesion to other materials. The joining of different materials is of critical importance in the fabrication of many and varied products.
Download or read book Metal Polymer Systems written by Jörg Florian Friedrich and published by John Wiley & Sons. This book was released on 2017-12-04 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The result of decades of research by a pioneer in the field, this is the first book to deal exclusively with achieving high-performance metal-polymer composites by chemical bonding. Covering both the academic and practical aspects, the author focuses on the chemistry of interfaces between metals and polymers with a particular emphasis on the chemical bonding between the different materials. He elucidates the various approaches to obtaining a stable interface, including, but not limited to, thermodynamically driven redox reactions, bond protection to prevent hydrolysis, the introduction of barrier layers, and stabilization by spacer molecules. Throughout, chemical bonding is promoted as a simple and economically viable alternative to adhesion based on reversible weak physical interaction. Consequently, the text equips readers with the practical tools necessary for designing high-strength metal-polymer composites with such desired properties as resilience, flexibility, rigidity or degradation resistance.
Download or read book Search of Excellence ANTEC 91 written by Society of Plastic Engineers and published by CRC Press. This book was released on 1991-05-01 with total page 2914 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonthermal Plasmas for Materials Processing written by Jörg Florian Friedrich and published by John Wiley & Sons. This book was released on 2022-07-15 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: NONTHERMAL PLASMAS FOR MATERIALS PROCESSING This unique book covers the physical and chemical aspects of plasma chemistry with polymers and gives new insights into the interaction of physics and chemistry of nonthermal plasmas and their applications in materials science for physicists and chemists. The properties and characteristics of plasmas, elementary (collision) processes in the gas phase, plasma surface interactions, gas discharge plasmas and technical plasma sources, atmospheric plasmas, plasma diagnostics, polymers and plasmas, plasma polymerization, post-plasma processes, plasma, and wet-chemical processing, plasma-induced generation of functional groups, and the chemical reactions on these groups along with a few exemplary applications are discussed in this comprehensive but condensed state-of-the-art book on plasma chemistry and its dependence on plasma physics. While plasma physics, plasma chemistry, and polymer science are often handled separately, the aim of the authors is to harmoniously join the physics and chemistry of low-pressure and atmospheric-pressure plasmas with polymer surface chemistry and polymerization and to compare such chemistry with classic chemistry. Readers will find in these chapters Interaction of plasma physics and chemistry in plasmas and at the surface of polymers; Explanation and interpretation of physical and chemical mechanisms on plasma polymerization and polymer surface modification; Introduction of modern techniques in plasma diagnostics, surface analysis of solids, and special behavior of polymers on exposure to plasmas; Discussion of the conflict of energy-rich plasma species with permanent energy supply and the much lower binding energies in polymers and alternatives to avoid random polymer decomposition Technical applications such as adhesion, cleaning, wettability, textile modification, coatings, films, etc. New perspectives are explained about how to use selective and mild processes to allow post-plasma chemistry on non-degraded polymer surfaces. Audience Physicists, polymer chemists, materials scientists, industrial engineers in biomedicine, coatings, printing, etc.
Download or read book Inorganic and Metal Containing Polymeric Materials written by Charles E. Carraher Jr. and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on metal-containing polymers began in the early 1960's when several workers found that vinyl ferrocene and other vinylic transition metal TI -complexes would undergo polymerization under the same conditions as conventional organic monomers to form high polymers which incorporated a potentially reactive metal as an integral part of the polymer structures. Some of these materials could act as semi conductors and possessed one or two dimensional conductivity. Thus applications in electronics could be visualized immediately. Other workers found that reactions used to make simple metal chelates could be used to prepare polymers if the ligands were designed properly. As interest in homogeneous catalysts developed in the late 60's and early 70's, several investigators began binding homogeneous catalysts onto polymers, where the advantage of homogeneous catalysis - known reaction mechanisms and the advantage of heterogeneous catalysis - simplicity and ease of recovery of catalysts could both be obtained. Indeed the polymer matrix itself often enhanced the selectivity of the catalyst. The first symposium on Organometallic Polymers, held at the National Meeting of the American Chemical Society in September 1977, attracted a large number of scientists interested in this field, both established investigators and newcomers. Subsequent symposia in 1977, 1979, 1983, and 1987 have seen the field mature. Hundreds of papers and patents have been published.
Download or read book Encyclopedia of Polymer Science and Technology Part 2 written by Herman F. Mark and published by Wiley-Interscience. This book was released on 2003 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third Edition is a completely new version in a new century of the Encyclopedia of Polymer Science and Technology. The new edition will bring the state-of-the-art up to the 21st century, with coverage of nanotechnology, new imaging and analytical techniques, new methods of controlled polymer architecture, biomimetics, and more. New topics covered include nanotechnology, AFM, MALDI, biomimetics, and genetic methods, of increasing importance since 1990 and will also bring up-to-date coverage of traditional topics of continuing interest. This edition will publish in 3 Parts of 4 volumes each. Each Part will be an A-Z selection of the newest articles available in the online edition of this encyclopedia. A list of the titles to appear in Part I can be viewed by clicking "What's New" at www.mrw.interscience.wiley.com/epst. Titles for Parts II and III will appear there as well when available.
