Download or read book Metallic Amorphous Alloy Reinforcements in Light Metal Matrices written by S. Jayalakshmi and published by Springer. This book was released on 2015-02-24 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents cutting-edge research on the design and development of novel, advanced high-strength, light-weight materials via the incorporation of novel reinforcements, namely, metallic amorphous alloys/bulk metallic glasses (BMG), in light metal matrix composites (LMMCs) based on Al and Mg. The book begins with an introduction to conventional ceramic reinforced light metal matrix composites, along with the major drawbacks which limit their application. Metallic amorphous alloys/Bulk Metallic Glasses (BMG) are new class of metallic materials that are distinctly differently from conventional metals/alloys in terms of their structure and thermal behavior, and exhibit extremely high strength (1 to 2 GPa) and large elastic strain limit (1 to 2%). Given these unique properties, upon their incorporation into Al/Mg-matrices, they provide superior interfacial properties, i.e. high degree of compatibility with the matrix due to their metallic nature when compared to conventional ceramic reinforcements, and thereby significantly enhance the mechanical performance of LMMCs. Amorphous/BMG reinforced LMMCs is an emerging research field and the existing literature is meager. This book discusses the various processing methods that would be suitable for these novel materials. A comparison of mechanical properties and strengthening mechanisms of amorphous/BMG reinforced composites with those of conventional ceramic composites is presented. Future research directions and wider research potential of the novel materials are discussed, and prospective applications are highlighted. For ease of understanding and comparison, appropriate schematics, tables, and figures are provided.

Download or read book Metal Matrix Composites written by Manoj Gupta and published by MDPI. This book was released on 2018-08-15 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Metal Matrix Composites" that was published in Metals

Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.

Download or read book Nanocomposites VI Nanoscience and Nanotechnology in Advanced Composites written by T. S. Srivatsan and published by Springer Nature. This book was released on 2020-01-15 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents novel and innovative contributions in the domain specific to nanocomposites, specifically on aspects both related and relevant to the following: · science at the nanoscale level · innovations and advances in processing · characterization, quantification, and analysis · mechanical property evaluation and rationalization · failure analysis · technological applications at the nanoscale level The collection brings together a range of developments in areas spanning basic science, processing, analysis, characterization, mechanical property evaluation, and failure analysis rationalization of composite materials.

Download or read book Futuristic Composites written by Sarabjeet Singh Sidhu and published by Springer. This book was released on 2018-09-26 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of chapters on various aspects of futuristic composite materials, from manufacturing challenges to materials characterization. The book covers the scientific basis of processing and synthesizing futuristic composites, including the prerequisite theoretical background and latest fabrication techniques. The book also discusses industrial applications of composites, such as in aerospace, automotive, and sports equipment. This book will serve as a valuable guide for researchers and professionals working in the area of futuristic lightweight materials.

Download or read book Amorphous Metallic Alloys written by BURTON and published by Elsevier. This book was released on 2013-10-22 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amorphous Metallic Alloys covers the preparation and properties of alloys produced by rapid quenching from the molten state. This book focuses on three technologically important classes of magnetic amorphous alloy—transition metal-metalloid (TM-M) alloys, rare earth-transition metal (RE-TM) alloys, and transition metal-zirconium or hafnium alloys (TM-Zr-Hf). The melt-quenched transition metal-metalloid and transition metal-zirconium type alloys are also emphasized. This text likewise explains in detail how amorphous atomic structure affects magnetic, mechanical, chemical, corrosion, and electrical characteristics. Other topics include glass forming ability in metallic materials, scattering theory of amorphous metals, dynamics of inhomogeneous plastic flow, and powder production processes. This publication is intended for students and researchers conducting work on amorphous metallic alloys.

Download or read book Field Assisted Sintering written by Eugene A. Olevsky and published by Springer. This book was released on 2018-08-09 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the first ever scientific monograph including an in-depth analysis of all major field-assisted sintering techniques. Until now, the electromagnetic field-assisted technologies of materials processing were lacking a systematic and generalized description in one fundamental publication; this work promotes the development of generalized concepts and of comparative analyses in this emerging area of materials fabrication. This book describes modern technologies for the powder processing-based fabrication of advanced materials. New approaches for the development of well-tailored and stable structures are thoroughly discussed. Since the potential of traditional thermo-mechanical methods of material treatment is limited due to inadequate control during processing, the book addresses ways to more accurately control the resultant material's structure and properties by an assisting application of electro-magnetic fields. The book describes resistance sintering, high-voltage consolidation, sintering by low-voltage electric pulses (including spark plasma sintering), flash sintering, microwave sintering, induction heating sintering, magnetic pulse compaction and other field-assisted sintering techniques. Includes an in-depth analysis of all major field-assisted sintering techniques; Explains new techniques and approaches for material treatment; Provides detailed descriptions of spark plasma sintering, microwave sintering, high-voltage consolidation, magnetic pulse compaction, and various other approaches when field-assisted treatment is applied.

Download or read book Metallic Materials with High Structural Efficiency written by Oleg N. Senkov and published by Springer Science & Business Media. This book was released on 2004-06-29 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fall of 1998, Prof. Sergey Firstov invited me to the Frantcevych Institute for Problems of Materials Science (IPMS) in Kyiv, Ukraine to discuss possible collaborations in the area of advanced metals research. During this visit, a strong mutual interest was evident in a broad range of structural metals technologies, and a quick friendship was established. Countless subsequent emails and a reciprocal visit to the U. S Air Force Research Laboratory by Prof. Firstov and a team of scientists from IPMS ensued to discuss and detail a broad collaboration in the area of structural metals. Two years after the initial visit, a major investment by the U. S. Air Force Office of Scientific Research (AFOSR) was established to pursue the technologies defined by these interactions. The annual reviews of the AFOSR Ukrainian Metals Initiative were held in late May, a most beautiful time in Kyiv when the lilacs are in bright display and the air is scented with the smell of falling blossoms from the chestnut trees that line the major streets and many parks. The sunny days and mild evenings provide a welcome break from winter, and on weekend evenings festive crowds spill onto the Khreshchatyk, Kyiv’s downtown boulevard, to listen to street musicians, watch jugglers and comedians, or simply to celebrate with friends. The annual reviews featured long days of intensive discussion of technical progress, followed in the evenings by the warm hospitality of the Ukrainian hosts.

Download or read book Metallic Glasses written by Keith K.C. Chan and published by MDPI. This book was released on 2018-07-02 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Metallic Glasses" that was published in Metals

Download or read book TMS 2015 144th Annual Meeting Exhibition Annual Meeting Supplemental Proceedings written by The Minerals, Metals & Materials Society (TMS) and published by Springer. This book was released on 2016-12-20 with total page 1496 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book TMS 2015 144th Annual Meeting and Exhibition written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2015-02-26 with total page 1584 pages. Available in PDF, EPUB and Kindle. Book excerpt: The TMS 2015 Annual Meeting Supplemental Proceedings is a collection of papers from the TMS 2015 Annual Meeting & Exhibition, held March 15-19 in Orlando, Florida, USA. The papers in this volume represent 33 symposia from the meeting. This volume, along with the other proceedings volumes published for the meeting, and archival journals, such as Metallurgical and Materials Transactions and Journal of Electronic Materials, represents the available written record of the 73 symposia held at TMS2015. This proceedings volume contains both edited and unedited papers; the unedited papers have not necessarily been reviewed by the symposium organizers and are presented "as is." The opinions and statements expressed within the papers are those of the individual authors only, and no confirmations or endorsements are intended or implied.

Download or read book Advances in Processing of Lightweight Metal Alloys and Composites written by R. Vaira Vignesh and published by Springer Nature. This book was released on 2022-11-18 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most important aspects of lightweight metal alloys including history, physical metallurgy, overview of production technologies, alloy development, compositing, post-processing (heat treatment, surface engineering, bulk-deformation), and joining methodologies. It discusses the microstructural evolution, fractography, morphology of corroded and worn surface to enable easy understanding of the mechanism. The topics covered in this book include lightweight metallic materials, instrumental characterization of light weight metal alloys and composites, severe plastic deformation processing of aluminum alloys, solid-state welding of aluminum alloys, aluminum metal matrix composite for automotive and aircraft applications, and heat treatment of aluminum metal matrix composites. The book is highly useful for students, researchers, academicians, scientists, and engineers working on lightweight materials.

Download or read book Thermal and Time Stability of Amorphous Alloys written by A. M. Glezer and published by CRC Press. This book was released on 2017-09-07 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference is dedicated to the problem of time-temperature stability of amorphous (non-crystalline) metal alloys with strongly nonequilibrium structure and unique physical and mechanical properties that are obtained by quenching from the melt at a rate that exceeds one millions of degrees c.o.s. second. As a stability test, the behavior of the plasticity of amorphous alloys is studied. The book examines the fundamental characteristics of amorphous alloys, the basic laws of structural relaxation, generalized information about the phenomenon of the ductile-brittle transition (temper embrittlement), the development of physically justified methods of predicting the stability of the properties, and provides information about the attempts of controlling the structure for the purpose of suppressing or deceleration of the ductile-brittle transition and, as a consequence, increasing the temperature and temporal stability of the amorphous state.

Download or read book Light Metals 2014 written by John Grandfield and published by Springer. This book was released on 2016-12-23 with total page 1351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia are a key part of the TMS Annual Meeting & Exhibition, presenting the most recent developments, discoveries, and practices in primary aluminum science and technology. Publishing the proceedings from these important symposia, the Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2014 collection includes papers from the following symposia: •Alumina and Bauxite •Aluminum Alloys: Fabrication, Characterization and Applications •Aluminum Processing •Aluminum Reduction Technology •Cast Shop for Aluminum Production •Electrode Technology for Aluminum Production •Light-metal Matrix (Nano)-composites

Download or read book Unconventional Techniques for the Production of Light Alloys and Composites written by Jose Martin Herrera Ramirez and published by Springer Nature. This book was released on 2020-06-22 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses methods used in the synthesis of light alloys and composites for industrial applications. It begins with a broad introduction to virtually all aspects of the technology of light alloys and composite materials for aircraft and aerospace applications. The basic theory of fiber and particle reinforcements; light metallic material characteristics and composite systems; components forms, and manufacturing techniques and processes are discussed. The book then progresses to describe the production of alloys and composites by unconventional techniques, such as powder metallurgy, sandwich technique, severe plastic deformation, additive manufacturing, and thermal spray, making it appropriate for researchers in both academia and industry. It will be of special interest to aerospace engineers. Provides a broad introduction to the technology used in manufacturing light alloys and composite materials; Describes the current technologies employed in synthesizing light alloys made from advanced materials; Focuses on unconventional techniques used to produce light alloys and composites in aerospace applications.

Download or read book Japanese Science and Technology 1983 1984 written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch and published by . This book was released on 1985 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1990 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: