Download or read book Metal Polymer Multi Material Structures and Manufacturing Techniques in Transportation written by Sergio T. Amancio-Filho and published by MDPI. This book was released on 2020-12-10 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reduction of greenhouse gas emissions—particularly from fossil fuel-powered vehicles and airplanes by means of weight savings and leaner fuel consumption, helps to restrain environmental impacts. In general, for a variety of industries, and specifically in the case of transport, where both weight savings and increased energy efficiency are pursued, the use of metal–polymer multi-material structures has been growing at an increasing and particularly fast pace in recent years. Several manufacturing techniques have been, or are being, developed, with the aim of being used for producing dissimilar materials in cost-efficient manners. This book presents recent developments in the state of the art of advanced additive manufacturing and the joining of metal–polymer multi-material structures in transportation. This publication mainly focuses on the correlations between microstructure, manufacturing process (i.e., AddJoining, adhesive bonding, friction riveting, friction-based staking and friction spot joining) properties, and the mechanical performance of metal–polymer multi-material structures.
Download or read book Metal Polymer Multi Material Structures and Manufacturing Techniques in Transportation written by Sergio T. Amancio-Filho and published by . This book was released on 2020 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reduction of greenhouse gas emissions--particularly from fossil fuel-powered vehicles and airplanes by means of weight savings and leaner fuel consumption, helps to restrain environmental impacts. In general, for a variety of industries, and specifically in the case of transport, where both weight savings and increased energy efficiency are pursued, the use of metal-polymer multi-material structures has been growing at an increasing and particularly fast pace in recent years. Several manufacturing techniques have been, or are being, developed, with the aim of being used for producing dissimilar materials in cost-efficient manners. This book presents recent developments in the state of the art of advanced additive manufacturing and the joining of metal-polymer multi-material structures in transportation. This publication mainly focuses on the correlations between microstructure, manufacturing process (i.e., AddJoining, adhesive bonding, friction riveting, friction-based staking and friction spot joining) properties, and the mechanical performance of metal-polymer multi-material structures.
Download or read book Proceedings of the 8th International Symposium on Solid Mechanics written by Marco Bittencourt and published by Springer Nature. This book was released on with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Materials and Processes in Transportation written by Dirk Lehmhus and published by John Wiley & Sons. This book was released on 2013-08-07 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightness, efficiency, durability and economic as well as ecological viability are key attributes required from materials today. In the transport industry, the performance needs are felt exceptionally strongly. This handbook and ready reference covers the use of structural materials throughout this industry, particularly for the road, air and rail sectors. A strong focus is placed on the latest developments in materials engineering. The authors present new insights and trends, providing firsthand information from the perspective of universities, Fraunhofer and independent research institutes, aerospace and automotive companies and suppliers. Arranged into parts to aid the readers in finding the information relevant to their needs: * Metals * Polymers * Composites * Cellular Materials * Modeling and Simulation * Higher Level Trends
Download or read book Selected Topics in Manufacturing written by Luigi Carrino and published by Springer Nature. This book was released on 2023-08-31 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected contributions covering various scientific and technological areas by AITeM (Italian Manufacturing Association). The first part, "AITeM Young Researcher Award 2023," written by young AITeM associates, reflects the multifaceted nature of manufacturing research. It explores emerging technologies and interdisciplinary connections to go beyond product fabrication, developing a complex value creation ecosystem for high-value-added global competition. Topics include additive manufacturing, materials processing technology, assembly, disassembly, circular economy, manufacturing systems design and management, quality engineering, production metrology, process and system simulation, optimization, and digital manufacturing. The second part, "White Papers," features five contributions on emerging trends in manufacturing. These papers are prepared by Working Groups focusing on strategic research topics in the manufacturing sector, including metallic prosthetic implants, lasers in electric mobility, digital twins, naval and marine applications, and surface functionalization in biomedical implants. These papers provide an overview of challenges in these frontier areas, highlighting the need for a multidisciplinary and innovative approach from the community to successfully address them.
Download or read book Innovative Structural Materials written by Teruo Kishi and published by Springer Nature. This book was released on 2023-07-27 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to innovative structural materials for multi-materialization. It is based on results of a 10-year national project, The Innovative Structural Materials Research and Development Project, which was carried out in Japan, aimed at reducing the weight of materials (steel, aluminum alloys, magnesium alloys, titanium alloys, thermoplastic CFRP, carbon fiber) and components used in transportation equipment such as automobiles. In this project, collaborative research in a total of nine fields including materials, joining, and structural designing was also carried out in order to realize multi-materials. This book is compiled with the aim of handing down the technical and academic results obtained through these research and development activities to the next generation of researchers and students. This book enables material engineers and researchers in the field of materials related to transportation equipment, graduate students in various technical fields, and engineers and researchers belonging to material users to grasp the full picture of material development and multi-materials technologies. For the understanding of engineers and researchers who will work on multi-materials, this book explains the current state of technology and science in each field and explains the innovative results obtained by research in each field.
Download or read book Lightweight Composite Structures in Transport written by James Njuguna and published by Woodhead Publishing. This book was released on 2016-01-22 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight Composite Structures in Transport: Design, Manufacturing, Analysis and Performance provides a detailed review of lightweight composite materials and structures and discusses their use in the transport industry, specifically surface and air transport. The book covers materials selection, the properties and performance of materials, and structures, design solutions, and manufacturing techniques. A broad range of different material classes is reviewed with emphasis on advanced materials. Chapters in the first two parts of the book consider the lightweight philosophy and current developments in manufacturing techniques for lightweight composite structures in the transport industry, with subsequent chapters in parts three to five discussing structural optimization and analysis, properties, and performance of lightweight composite structures, durability, damage tolerance and structural integrity. Final chapters present case studies on lightweight composite design for transport structures. Comprehensively covers materials selection, design solutions, manufacturing techniques, structural analysis, and performance of lightweight composite structures in the transport industry Includes commentary from leading industrial and academic experts in the field who present cutting-edge research on advanced lightweight materials for the transport industry Includes case studies on lightweight composite design for transport structures
Download or read book Magnesium Technology 2017 written by Kiran N. Solanki and published by Springer. This book was released on 2017-02-14 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2017 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications.
Download or read book Introduction to Materials for Advanced Energy Systems written by Colin Tong and published by Springer. This book was released on 2018-12-12 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first of its kind text enables today’s students to understand current and future energy challenges, to acquire skills for selecting and using materials and manufacturing processes in the design of energy systems, and to develop a cross-functional approach to materials, mechanics, electronics and processes of energy production. While taking economic and regulatory aspects into account, this textbook provides a comprehensive introduction to the range of materials used for advanced energy systems, including fossil, nuclear, solar, bio, wind, geothermal, ocean and hydropower, hydrogen, and nuclear, as well as thermal energy storage and electrochemical storage in fuel cells. A separate chapter is devoted to emerging energy harvesting systems. Integrated coverage includes the application of scientific and engineering principles to materials that enable different types of energy systems. Properties, performance, modeling, fabrication, characterization and application of structural, functional and hybrid materials are described for each energy system. Readers will appreciate the complex relationships among materials selection, optimizing design, and component operating conditions in each energy system. Research and development trends of novel emerging materials for future hybrid energy systems are also considered. Each chapter is basically a self-contained unit, easily enabling instructors to adapt the book for coursework. This textbook is suitable for students in science and engineering who seek to obtain a comprehensive understanding of different energy processes, and how materials enable energy harvesting, conversion, and storage. In setting forth the latest advances and new frontiers of research, the text also serves as a comprehensive reference on energy materials for experienced materials scientists, engineers, and physicists. Includes pedagogical features such as in-depth side bars, worked-out and end-of- chapter exercises, and many references to further reading Provides comprehensive coverage of materials-based solutions for major and emerging energy systems Brings together diverse subject matter by integrating theory with engaging insights
Download or read book Multi material Injection Moulding written by V. Goodship and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many variations of injection moulding have been developed and one of the rapidly expanding fields is multi-material injection moulding. This review looks at the many techniques being used, from the terminology to case studies. The three primary types of multi-material injection moulding examined are multi-component, multi-shot and over-moulding. The basic types of multi-material injection moulding, the issues surrounding combining different types of polymers and examples of practical uses of this technology are described.
Download or read book 4M 2005 First International Conference on Multi Material Micro Manufacture written by Stefan Dimov and published by Elsevier. This book was released on 2005-12-07 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4M 2005 - First International Conference on Multi-Material Micro Manufacture
Download or read book Joining of Polymer Metal Hybrid Structures written by Sergio T. Amancio Filho and published by John Wiley & Sons. This book was released on 2017-12-21 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to the concepts of joining technologies for hybrid structures This book introduces the concepts of joining technology for polymer-metal hybrid structures by addressing current and new joining methods. This is achieved by using a balanced approach focusing on the scientific features (structural, physical, chemical, and metallurgical/polymer science phenomena) and engineering properties (mechanical performance, design, applications, etc.) of the currently available and new joining processes. It covers such topics as mechanical fastening, adhesive bonding, advanced joining methods, and statistical analysis in joining technology. Joining of Polymer-Metal Hybrid Structures: Principles and Applications is structured by joining principles, in adhesion-based, mechanical fastened, and direct-assembly methods. The book discusses such recent technologies as friction riveting, friction spot joining and ultrasonic joining. This is used for applications where the original base material characteristics must remain unchanged. Additional sections cover the main principles of statistical analysis in joining technology (illustrated with examples from the field of polymer-metal joining). Joining methods discussed include mechanical fastening (bolting, screwing, riveting, hinges, and fits of polymers and composites), adhesive bonding, and other advanced joining methods (friction staking, laser welding, induction welding, etc.). Provides a combined engineering and scientific approach used to describe principles, properties, and applications of polymer-metal hybrid joints Describes the current developments in design of experiments and statistical analysis in joining technology with emphasis on joining of polymer-metal hybrid structures Covers recent innovations in joining technology of polymer-metal hybrid joints including friction riveting, friction spot joining, friction staking, and ultrasonic joining Principles illustrated by pictures, 3D-schemes, charts, and drawings using examples from the field of polymer-metal joining Joining of Polymer-Metal Hybrid Structures: Principles and Applications will appeal to chemical, polymer, materials, metallurgical, composites, mechanical, process, product, and welding engineers, scientists and students, technicians, and joining process professionals.
Download or read book Practical Implementations of Additive Manufacturing Technologies written by Shashanka Rajendrachari and published by Springer Nature. This book was released on 2023-09-30 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives in-depth information about evolution of additive manufacturing from a few decades to the present explaining how the technology has been improved with time and its practical implementation of the technology in various applications and industries. It describes the different types of additive manufacturing methods used to prepare materials and their advantages, followed by the limitations. This includes the fabrication of metal, polymer, biomaterial, hybrid nanomaterial, smart material, and ceramic materials using additive manufacturing methods used in many applications such as 3D printed batteries, supercapacitors, electrochemical sensors, biosensors, aircraft interior components, rocket engines components, automobile components, and medical implants. It also describes advanced applications of additive manufacturing materials in the construction, biomedical, and sports industries. In addition, the book also deep dives into the environmental impact and economic benefits of additive manufacturing industries. A special chapter is included to give an overview on the general type of job opportunities for engineering graduates and research scholars seeking to find employment in additive manufacturing companies. In short, the content of this book targets primarily researchers, engineering students (bachelors and masters), and industrial engineers.
Download or read book A Guide to Additive Manufacturing written by Damir Godec and published by Springer Nature. This book was released on 2022-09-12 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book gives both a theoretical and practical overview of several important aspects of additive manufacturing (AM). It is written in an educative style to enable the reader to understand and apply the material. It begins with an introduction to AM technologies and the general workflow, as well as an overview of the current standards within AM. In the following chapter, a more in-depth description is given of design optimization and simulation for AM in polymers and metals, including practical guidelines for topology optimization and the use of lattice structures. Special attention is also given to the economics of AM and when the technology offers a benefit compared to conventional manufacturing processes. This is followed by a chapter with practical insights into how AM materials and processing parameters are developed for both material extrusion and powder bed fusion. The final chapter describes functionally graded AM in various materials and technologies. Throughout the book, a large number of industrial applications are described to exemplify the benefits of AM.
Download or read book Material Forming written by Anna Carla Araujo and published by Materials Research Forum LLC. This book was released on 2024-05-20 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: These ESAFORM 2024 conference proceedings cover a wide range of topics: Additive manufacturing; Composites forming processes; Extrusion and drawing; Forging and rolling; Formability of metallic materials; Friction and wear in metal forming; Incremental and sheet metal forming; Innovative joining by forming technologies; Optimization and inverse analysis in forming; Machining, Cutting and severe plastic deformation processes; Material behavior modelling; New and advanced numerical strategies for material forming; Non-conventional processes; Polymer processing and thermomechanical properties; Sustainability on material forming. Keywords: WAAM Technology, Fused deposition Modeling (FDM), Fiber Composite Printers, Ultrasonic Powder Atomization, Finite Element Modeling (FEM), Laser Powder Bed Fusion (L-PBF), Rapid Prototyping in Additive Manufacturing, Directed Energy Deposition (DED), GTAW Droplet Deposition, Deep Learning, Thermoplastic Pultrusion, Textile Reinforcements, Thermoforming Simulation, New Sustainable Materials, Non-Crimp Fabrics, CFRP Scraps, PEEK Composites, Thermoplastic Sheets, Flax/PP Composites.
Download or read book History of Humanity written by UNESCO and published by UNESCO Publishing. This book was released on 2008-12-31 with total page 991 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the seventh and final volume in this comprehensive guide to the history of world cultures throughout historical times.
Download or read book Additive Manufacturing of Metals written by John O. Milewski and published by Springer. This book was released on 2017-06-28 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This engaging volume presents the exciting new technology of additive manufacturing (AM) of metal objects for a broad audience of academic and industry researchers, manufacturing professionals, undergraduate and graduate students, hobbyists, and artists. Innovative applications ranging from rocket nozzles to custom jewelry to medical implants illustrate a new world of freedom in design and fabrication, creating objects otherwise not possible by conventional means. The author describes the various methods and advanced metals used to create high value components, enabling readers to choose which process is best for them. Of particular interest is how harnessing the power of lasers, electron beams, and electric arcs, as directed by advanced computer models, robots, and 3D printing systems, can create otherwise unattainable objects. A timeline depicting the evolution of metalworking, accelerated by the computer and information age, ties AM metal technology to the rapid evolution of global technology trends. Charts, diagrams, and illustrations complement the text to describe the diverse set of technologies brought together in the AM processing of metal. Extensive listing of terms, definitions, and acronyms provides the reader with a quick reference guide to the language of AM metal processing. The book directs the reader to a wealth of internet sites providing further reading and resources, such as vendors and service providers, to jump start those interested in taking the first steps to establishing AM metal capability on whatever scale. The appendix provides hands-on example exercises for those ready to engage in experiential self-directed learning.
