Download or read book Metal Oxide Based Nanostructured Electrocatalysts for Fuel Cells Electrolyzers and Metal Air Batteries written by Teko Napporn and published by Elsevier. This book was released on 2021-01-30 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries is a comprehensive book summarizing the recent overview of these new materials developed to date. The book is motivated by research that focuses on the reduction of noble metal content in catalysts to reduce the cost associated to the entire system. Metal oxides gained significant interest in heterogeneous catalysis for basic research and industrial deployment. Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries puts these opportunities and challenges into a broad context, discusses the recent researches and technological advances, and finally provides several pathways and guidelines that could inspire the development of ground-breaking electrochemical devices for energy production or storage. Its primary focus is how materials development is an important approach to produce electricity for key applications such as automotive and industrial. The book is appropriate for those working in academia and R&D in the disciplines of materials science, chemistry, electrochemistry, and engineering. - Includes key aspects of materials design to improve the performance of electrode materials for energy conversion and storage device applications - Reviews emerging metal oxide materials for hydrogen production, hydrogen oxidation, oxygen reduction and oxygen evolution - Discusses metal oxide electrocatalysts for water-splitting, metal-air batteries, electrolyzer, and fuel cell applications

Download or read book Nanostructured Photocatalysts written by Rabah Boukherroub and published by Elsevier. This book was released on 2020-06-06 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Photocatalysts: From Materials to Applications in Solar Fuels and Environmental Remediation addresses the different properties of nanomaterials-based heterogeneous photocatalysis. Heterogeneous nanostructured photocatalysis represents an interesting and viable technique to address issues of climate change and global energy supply. Sustainable hydrogen (H2) fuel production from water via semiconductor photocatalysis, driven by solar energy, is regarded as a viable and sustainable solution to address increasing energy and environmental issues. Similarly, photocatalytic reduction of CO2 with water for the production of hydrocarbons could also be a viable solution. Sections cover band gap tuning, high surface area, the short diffusion path of carriers, and more. - Introduces the utilization of nanostructured materials in heterogeneous photocatalysis for hydrogen fuel production via water splitting - Explains preparation techniques for different nanomaterials and hybrid nanocomposites, enabling improved sunlight absorption efficiency and enhanced charge separation - Assesses the challenges that need to be addressed before this technology can be practically implemented, particularly of identifying cost-effective nanophotocatalysts

Download or read book Nanostructured Anodic Metal Oxides written by Grzegorz D. Sulka and published by Elsevier. This book was released on 2020-03-27 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Anodic Metal Oxides: Synthesis and Applications reviews the current status of fabrication strategies that have been successfully developed to generate nanoporous, nanotubular and nanofibrous anodic oxides on a range of metals. The most recent achievements and innovative strategies for the synthesis of nanoporous aluminum oxide and nanotubular titanium oxide are discussed. However, a special emphasis is placed on the possibility of fabrication of nanostructured oxide layers with different morphologies on other metals, including aluminum titanium, tantalum, tin, zinc, zirconium and copper. In addition, emerging biomedical applications of synthesized materials are discussed in detail. During the past decade, great progress has been made both in the preparation and characterization of various nanomaterials and their functional applications. The anodization of metals has proven to be reliable for the synthesis of nanoporous, nanotubular and nanofibrous metal oxides to produce a desired diameter, density, aspect ratio (length to diameter) of pores/tubes, and internal pore/tube structure. - Provides an in-depth overview of anodization techniques for a range of metals - Explores the emerging applications of anodic metal oxides - Explains mechanisms of formation valve metal oxides via anodization

Download or read book Metal Oxide Nanostructures written by Daniela Nunes and published by Elsevier. This book was released on 2018-11-01 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanostructures: Synthesis, Properties and Applications covers the theoretical and experimental aspects related to design, synthesis, fabrication, processing, structural, morphological, optical and electronic properties on the topic. In addition, it reviews surface functionalization and hybrid materials, focusing on the advantages of these oxide nanostructures. The book concludes with the current and future prospective applications of these materials. Users will find a complete overview of all the important topics related to oxide nanostructures, from the physics of the materials, to its application. - Delves into hybrid structured metal oxides and their promising use in the next generation of electronic devices - Includes fundamental chapters on synthesis design and the properties of metal oxide nanostructures - Provides an in-depth overview of novel applications, including chromogenics, electronics and energy

Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications

Download or read book Renewable Resources and Renewable Energy written by Paolo Fornasiero and published by CRC Press. This book was released on 2011-12-05 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: As energy demands continue to surge worldwide, the need for more efficient and environmentally neutral energy production also becomes increasingly apparent. Renewable Resources and Renewable Energy: A Global Challenge presents a well-rounded perspective on the development of bio-based feedstocks, biodegradable plastics, hydrogen energy, fuel

Download or read book Nanocasting written by An-Hui Lu and published by Royal Society of Chemistry. This book was released on 2010 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured materials with tailored properties are regarded as a fundamental element in the development of future science and technology. Research is still ongoing into the nanosized construction elements required to create functional solids. The recently developed technique, nanocasting, has great advantage over others in terms of the synthesis of special nanostructured materials by the careful choice of suitable elements and nanoengineering steps. This new book summarizes the recent developments in nanocasting, including the principles of nanocasting, syntheses of novel nanostructured materials, characterization methods, detailed synthetic recipes and further possible development in this area. The book focuses on the synthesis of porous solids from the viewpoint of methodology and introduces the science of nanocasting from fundamental principles to their use in synthesis of various materials. It starts by outlining the principles of nanocasting, requirements to the templates and precursors and the tools needed to probe matter at the nanoscale level. It describes how to synthesize nano structured porous solids with defined characteristics and finally discusses the functionalization and application of porous solids. Special attention is given to new developments in this field and future perspectives. A useful appendix covering the detailed synthetic recipes of various templates including porous silica, porous carbon and colloidal spheres is included which will be invaluable to researchers wanting to follow and reproduce nanocast materials. Topics covered in the book include: * inorganic chemistry * organic chemistry * solution chemistry * sol-gel and interface science * acid-base equilibria * electrochemistry * biochemistry * confined synthesis The book gives readers not only an overview of nanocasting technology, but also sufficient information and knowledge for those wanting to prepare various nanostructured materials without needing to search the available literature.

Download or read book Metal Oxide Nanocomposites written by B. Raneesh and published by John Wiley & Sons. This book was released on 2021-02-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanocomposites: Synthesis and Applications summarizes many of the recent research accomplishments in the area of metal oxide-based nanocomposites. This book focussing on the following topics: Nanocomposites preparation and characterization of metal oxide nanocomposites; synthesis of core/shell metal oxide nanocomposites; multilayer thin films; sequential assembly of nanocomposite materials; semiconducting polymer metal oxide nanocomposites; graphene-based metal and metal oxide nanocomposites; carbon nanotube–metal–oxide nanocomposites; silicon mixed oxide nanocomposites; gas semiconducting sensors based on metal oxide nanocomposites; metal ]organic framework nanocomposite for hydrogen production and nanocomposites application towards photovoltaic and photocatalytic.

Download or read book Metal Oxide Nanoparticles 2 Volume Set written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles A complete nanoparticle resource for chemists and industry professionals Metal oxide nanoparticles are integral to a wide range of natural and technological processes—from mineral transformation to electronics. Additionally, the fields of engineering, electronics, energy technology, and electronics all utilize metal oxide nanoparticle powders. Metal Oxide Nanoparticles: Formation, Functional Properties, and Interfaces presents readers with the most relevant synthesis and formulation approaches for using metal oxide nanoparticles as functional materials. It covers common processing routes and the assessment of physical and chemical particle properties through comprehensive and complementary characterization methods. This book will serve as an introduction to nanoparticle formulation, their interface chemistry and functional properties at the nanoscale. It will also act as an in-depth resource, sharing detailed information on advanced approaches to the physical, chemical, surface, and interface characterization of metal oxide nanoparticle powders and dispersions. Addresses the application of metal oxide nanoparticles and its economic impact Examines particle synthesis, including the principles of selected bottom-up strategies Explores nanoparticle formulation—a selection of processing and application routes Discusses the significance of particle surfaces and interfaces on structure formation, stability and functional materials properties Covers metal oxide nanoparticle characterization at different length scales With this valuable resource, academic researchers, industrial chemists, and PhD students can all gain insight into the synthesis, properties, and applications of metal oxide nanoparticles.

Download or read book Metal Nanoparticles for Catalysis written by Franklin Tao and published by Royal Society of Chemistry. This book was released on 2014-06-12 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis is a central topic in chemical transformation and energy conversion. Thanks to the spectacular achievements of colloidal chemistry and the synthesis of nanomaterials over the last two decades, there have also been significant advances in nanoparticle catalysis. Catalysis on different metal nanostructures with well-defined structures and composition has been extensively studied. Metal nanocrystals synthesized with colloidal chemistry exhibit different catalytic performances in contrast to metal nanoparticles prepared with impregnation or deposition precipitation. Additionally, theoretical approaches in predicting catalysis performance and understanding catalytic mechanism on these metal nanocatalysts have made significant progress. Metal Nanoparticles for Catalysis is a comprehensive text on catalysis on Nanoparticles, looking at both their synthesis and applications. Chapter topics include nanoreactor catalysis; Pd nanoparticles in C-C coupling reactions; metal salt-based gold nanocatalysts; theoretical insights into metal nanocatalysts; and nanoparticle mediated clock reaction. This book bridges the gap between nanomaterials synthesis and characterization, and catalysis. As such, this text will be a valuable resource for postgraduate students and researchers in these exciting fields.

Download or read book Wastewater Microbiology written by Gabriel Bitton and published by John Wiley & Sons. This book was released on 2011-06-09 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater Microbiology focuses on microbial contaminants found in wastewater, methods of detection for these contaminants, and methods of cleansing water of microbial contamination. This classic reference has now been updated to focus more exclusively on issues particular to wastewater, with new information on fecal contamination and new molecular methods. The book features new methods to determine cell viability/activity in environmental samples; a new section on bacterial spores as indicators; new information covering disinfection byproducts, UV disinfection, and photoreactivation; and much more. A PowerPoint of figures from the book is available at ftp://ftp.wiley.com/public/sci_tech_med/wastewater_microbiology.

Download or read book Nanostructured Functional and Flexible Materials for Energy Conversion and Storage Systems written by A. Pandikumar and published by Elsevier. This book was released on 2020-05-12 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured, Functional, and Flexible Materials for Energy Conversion and Storage Systems gathers and reviews developments within the field of nanostructured functional materials towards energy conversion and storage. Contributions from leading research groups involved in interdisciplinary research in the fields of chemistry, physics and materials science and engineering are presented. Chapters dealing with the development of nanostructured materials for energy conversion processes, including oxygen reduction, methanol oxidation, oxygen evolution, hydrogen evolution, formic acid oxidation and solar cells are discussed. The work concludes with a look at the application of nanostructured functional materials in energy storage system, such as supercapacitors and batteries. With its distinguished international team of expert contributors, this book will be an indispensable tool for anyone involved in the field of energy conversion and storage, including materials engineers, scientists and academics. - Covers the importance of energy conversion and storage systems and the application of nanostructured functional materials toward energy-relevant catalytic processes - Discusses the basic principles involved in energy conversion and storage systems - Presents the role of nanostructured functional materials in the current scenario of energy-related research and development

Download or read book Nanostructured Catalysts written by Christian Hess and published by Royal Society of Chemistry. This book was released on 2011-07-22 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a comprehensive up-to-date summary of the existing information on the structural/electronic properties, chemistry and catalytic properties of vanadium and molybdenum containing catalysts. It discusses the importance of nanoscience for the controlled synthesis of catalysts with functional properties and introduces the necessary background regarding surface properties and preparation techniques, leading from a textbook level to the current state of knowledge. Then follows an extensive survey and analysis of the existing open and patent literature - an essential knowledge source for the development of the new generation of partial oxidation catalysts. Important examples from current research on partial oxidation reactions are reviewed from experts in the field. The next chapter discusses the importance of 2- and 3-dimensional model systems for a fundamental understanding of the structure of transition metal oxide catalysts and its correlation to reactivity. Finally, an outlook on research opportunities within the area of partial oxidation reactions is presented.

Download or read book Nanotechnology in Catalysis written by Bert Sels and published by John Wiley & Sons. This book was released on 2017-06-21 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the R&D efforts in the field that have resulted in a plethora of novel applications over the past decade, this handbook gives a comprehensive overview of the tangible benefits of nanotechnology in catalysis. By bridging fundamental research and industrial development, it provides a unique perspective on this scientifically and economically important field. While the first three parts are devoted to preparation and characterization of nanocatalysts, the final three provide in-depth insights into their applications in the fine chemicals industry, the energy industry, and for environmental protection, with expert authors reporting on real-life applications that are on the brink of commercialization. Timely reading for catalytic chemists, materials scientists, chemists in industry, and process engineers.

Download or read book Advances in Nanostructured Materials written by Bibhu Prasad Swain and published by Springer Nature. This book was released on 2022-03-30 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in nanostructured materials. It describes the characterization of nanomaterials, their preparation methods and performance testing techniques; the design and development of nano-scale devices; and the applications of nanomaterials, with examples taken from different industries, such as energy, bioengineering and medicine. The book is broadly divided into sections such as nanostructure semiconductor materials for device applications, nanostructured ferroelectric and ferromagnetic materials.. The topics covered include experimental approaches of device fabrication, photovoltaics and supercapacitors applications, etc. Given the contents, the book will be useful for students, researchers, and professionals working in the area of nanotechnology and nanomaterials.

Download or read book Metal Oxide Based Heterostructures written by Naveen Kumar and published by Elsevier. This book was released on 2022-11-13 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide–Based Heterostructures: Fabrication and Applications provides information on synthesis strategies, structural and hierarchical features, morphological characteristics of metal oxide–based heterostructures, and their diverse applications. This book begins with an introduction to the various multidimensional heterostructures, synthesis aspects, and techniques used to control the formation of heterostructures. Then, the impact of synthesis routes on the formation of mixed metal oxide heterostructures and their properties are analyzed. The effect of nonmetal doping, metal doping, and composites of metal oxide heterostructures on the properties of heterostructures is also addressed and that also includes opportunities for optimization of the material's performance for specific applications. Special attention is given to the surface characteristics of the metal oxide heterostructures and their impact on the material's performance, and the applications of metal oxide heterostructures in various fields such as environmental remediation, sensing, organic catalysis, photovoltaics, light emitting materials, and hydrogen production. - Introduces key principles for metal oxide heterostructures, their properties, key characteristics, and synthesis routes - Emphasizes the relationship between synthesis strategies and material performance, including optimization strategies such as tailoring the material's surface characteristics or structure - Discusses metal oxide heterostructures and their application in lighting and displays, energy, environment, and sensing

Download or read book Advances in Nanostructured Composites written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2019-04-30 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites and nanocomposites are used in cases where long durability and strength of components are required; i.e., where high stress levels, erosion processes and multiphase environments are present, including the parts under collision and impact, the parts under rotating motion and erosion (like excavation drills in oil and gas wells). The first volume of this book aims to provide a guide for fabrication of new nanocomposites mainly based on carbon nanotubes and graphene. The main topics of this volume are: Application of Nano-powders for Formation of Metal Matrix of Composites, Conjugated Polymer Nanocomposites, Biopolymer Nanocomposites, Dental Nanocomposites, Graphene-based Nanocomposites for Electrochemical Energy Storage, Polymer/Filler Composites for Optical Diffuse Reflectors, Synthesis and Applications of LDH-Based Nanocomposites, Rubber—CNT Nanocomposites, Nanocomposite Fibers with Carbon Nanotubes, Fabrications of Graphene Based Nanocomposites for Electrochemical Sensing of Drug Molecules, Recent Advances in Graphene Metal Oxide Based Nanocomposites.