Download or read book Additive Manufacturing of Metals written by Leila Ladani and published by . This book was released on 2020-08 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a technical introduction to additive manufacturing (AM) with a focus on powder bed fusion and metals. It provides the theory and industry-based practices to design, make, and test metal components via AM. After outlining the methods and materials of powder bed methods, the book explains the workings and physical limitations of electron beam and laser melt technologies in manufacturing parts, using a variety of metal powders. In this context, the physics of powder melting is described, as well as the effects of temperature variables on the properties of a part. The critical elements of how powder feedstock is chosen and formulated are explained. Processing methods are described using original design and engineering parameters developed by the author. Information is provided on current test methods of metals produced by AM, as well as how to carry out quality control, monitor reliability, and implement safety standards. For process design, a section is devoted to modeling.Each chapter includes a set of problems for students and practitioners that reflect metals' fabrication in industry.

Download or read book Metal Materials Processes and Manufacturing written by Dong Won Jung and published by Trans Tech Publications Ltd. This book was released on 2021-01-18 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3rd International Conference on Metal Material Processes and Manufacturing (ICMMPM 2020) Selected, peer-reviewed papers from the 2020 3rd International Conference on Metal Material Processes and Manufacturing (ICMMPM 2020), June 22-23, 2020, Singapore, Singapore

Download or read book Principles of Metal Manufacturing Processes written by J. Beddoes and published by Butterworth-Heinemann. This book was released on 1999-05-28 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals are still the most widely used structural materials in the manufacture of products and structures. Their properties are extremely dependent on the processes they undergo to form the final product. Successful manufacturing therefore depends on a detailed knowledge of the processing of the materials involved. This highly illustrated book provides that knowledge.Metal processing is a technical subject requiring a quantitative approach. This book illustrates this approach with real case studies derived from industry. - Real industrial case studies - Quantitative approach - Challenging student problems

Download or read book Materials Processing written by Lorraine F. Francis and published by Academic Press. This book was released on 2015-12-28 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Processing is the first textbook to bring the fundamental concepts of materials processing together in a unified approach that highlights the overlap in scientific and engineering principles. It teaches students the key principles involved in the processing of engineering materials, specifically metals, ceramics and polymers, from starting or raw materials through to the final functional forms. Its self-contained approach is based on the state of matter most central to the shaping of the material: melt, solid, powder, dispersion and solution, and vapor. With this approach, students learn processing fundamentals and appreciate the similarities and differences between the materials classes. The book uses a consistent nomenclature that allow for easier comparisons between various materials and processes. Emphasis is on fundamental principles that gives students a strong foundation for understanding processing and manufacturing methods. Development of connections between processing and structure builds on students' existing knowledge of structure-property relationships. Examples of both standard and newer additive manufacturing methods throughout provide students with an overview of the methods that they will likely encounter in their careers. This book is intended primarily for upper-level undergraduates and beginning graduate students in Materials Science and Engineering who are already schooled in the structure and properties of metals, ceramics and polymers, and are ready to apply their knowledge to materials processing. It will also appeal to students from other engineering disciplines who have completed an introductory materials science and engineering course. - Coverage of metal, ceramic and polymer processing in a single text provides a self-contained approach and consistent nomenclature that allow for easier comparisons between various materials and processes - Emphasis on fundamental principles gives students a strong foundation for understanding processing and manufacturing methods - Development of connections between processing and structure builds on students' existing knowledge of structure - property relationships - Examples of both standard and newer additive manufacturing methods throughout provide students with an overview of the methods that they will likely encounter in their careers

Download or read book Metal Materials Processes and Manufacturing written by Dong Won Jung and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3rd International Conference on Metal Material Processes and Manufacturing (ICMMPM 2020) Selected, peer-reviewed papers from the 2020 3rd International Conference on Metal Material Processes and Manufacturing (ICMMPM 2020), June 22-23, 2020, Singapore, Singapore

Download or read book Manufacturing Processes Materials 5th Edition written by Ahmad K. Elshennawy and published by Society of Manufacturing Engineers (SME). This book was released on 2015-01-02 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturers know the value of a knowledgeable workforce. The challenge today is finding skilled people to fill these positions. Since publication of the first edition in 1961, instructors, students, and practitioners have relied on Manufacturing Processes and Materials for the foundational knowledge needed to perform in manufacturing roles across a myriad of industries. As an on-the-job reference, anyone working in a technical department of a manufacturing company — regardless of education, experience, and skill level — will use this book to gain a basic understanding of manufacturing processes, materials, and equipment. Now in its fifth edition, the book covers the basic processes, materials, and machinery used in the job shop, toolroom, or small manufacturing facility. At the same time, it describes advanced equipment used in larger production environments. The reader is given a thorough review of metals, composites, plastics, and other engineering materials, including their physical properties, testing, treatment, and suitability for use in manufacturing. Quality, measurement and gaging, process planning and cost analysis, and manufacturing systems are all addressed. Questions and problems at the end of each chapter can be used as a self-test or as assignments in the classroom. Manufacturing Processes and Materials is also available as an eBook. Additional teaching materials for instructors: Instructor's Guide (eBook only)Instructor's Slides (zip file)

Download or read book Fundamentals of Modern Manufacturing written by Mikell P. Groover and published by Wiley Global Education. This book was released on 2019-11-06 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Modern Manufacturing is a balanced and qualitative examination of the materials, methods, and procedures of both traditional and recently-developed manufacturing principles and practices. This comprehensive textbook explores a broad range of essential points of learning, from long-established manufacturing processes and materials to contemporary electronics manufacturing technologies. An emphasis on the use of mathematical models and equations in manufacturing science presents readers with quantitative coverage of key topics, while plentiful tables, graphs, illustrations, and practice problems strengthen student comprehension and retention. Now in its seventh edition, this leading textbook provides junior or senior-level engineering students in manufacturing courses with an inclusive and up-to-date treatment of the basic building blocks of modern manufacturing science. Coverage of core subject areas helps students understand the physical and mechanical properties of numerous manufacturing materials, the fundamentals of common manufacturing processes, the economic and quality control issues surrounding various processes, and recently developed and emerging manufacturing technologies. Thorough investigation of topics such as metal-casting and welding, material shaping processes, machining and cutting technology, and manufacturing systems and support helps students gain solid foundational knowledge of modern manufacturing.

Download or read book Proceedings of the 5th International Conference on Metal Material Processes and Manufacturing written by Dong Won Jung and published by Springer Nature. This book was released on 2024 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the proceedings of International Conference on Metal Material Processes and Manufacturing is a comprehensive collection of research papers presented at a conference held on July 29-30, 2023 in Jeju Island, South Korea. The book serves as a valuable resource for academics, researchers, and professionals in the field of metal material processes and manufacturing. The book is organized into several chapters, each covering a different topic related to metal material processes and manufacturing. The chapters include: Fundamentals of Metallurgical Processes, Metallurgical Process Optimization, Metal Matrix Composites, Molten Metal Processing and Modeling. Overall, the proceedings of International Conference on Metal Material Processes and Manufacturing provides a comprehensive overview of the current state of research in the field of metal material processes and manufacturing. It is an essential resource for anyone interested in staying up-to-date with the latest developments in this rapidly evolving field.

Download or read book Additive Manufacturing of Metals written by Leila Ladani and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manufacturing Technology written by Helmi A. Youssef and published by CRC Press. This book was released on 2023-08-17 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition textbook provides comprehensive knowledge and insight into various aspects of manufacturing technology, processes, materials, tooling, and equipment. Its main objective is to introduce the grand spectrum of manufacturing technology to individuals who will be involved in the design and manufacturing of finished products and to provide them with basic information on manufacturing technologies. Manufacturing Technology: Materials, Processes, and Equipment, Second Edition, is written in a descriptive manner, where the emphasis is on the fundamentals of the process, its capabilities, typical applications, advantages, and limitations. Mathematical modeling and equations are used only when they enhance the basic understanding of the material dealt with. The book is a fundamental textbook that covers all the manufacturing processes, materials, and equipment used to convert the raw materials to a final product. It presents the materials used in manufacturing processes and covers the heat treatment processes, smelting of metals, and other technological processes such as casting, forming, powder metallurgy, joining processes, and surface technology. Manufacturing processes for polymers, ceramics, and composites are also covered. The book also covers surface technology, fundamentals of traditional and nontraditional machining processes, numerical control of machine tools, industrial robots and hexapods, additive manufacturing, and industry 4.0 technologies. The book is written specifically for undergraduates in industrial, manufacturing, mechanical, and materials engineering disciplines of the second to fourth levels to cover complete courses of manufacturing technology taught in engineering colleges and institutions all over the world. It also covers the needs of production and manufacturing engineers and technologists participating in related industries where it is expected to be part of their professional library. Additionally, the book can be used by students in other disciplines concerned with design and manufacturing, such as automotive and aerospace engineering.

Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.

Download or read book Science Technology and Applications of Metals in Additive Manufacturing written by Bhaskar Dutta and published by Elsevier. This book was released on 2019-08-15 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, Technology and Applications of Metal Additive Manufacturing provides a holistic picture of metal Additive Manufacturing (AM) that encompasses the science, technology and applications for the use of metal AM. Users will find design aspects, various metal AM technologies commercially available, a focus on merits and demerits, implications for qualification and certification, applications, cost modeling of AM, and future directions. This book serves as an educational guide, providing a holistic picture of metal AM that encompasses science, technology and applications for the real-life use of metal AM. - Includes an overall understanding of metal additive manufacturing, Including steps involved (process flow) - Discusses available commercial metal AM technologies and their relative strengths and weaknesses - Reviews the process of qualification of AM parts, various applications, cost modeling, and the future directions of metal AM

Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2016-04-06 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.

Download or read book Materials and Manufacturing An Introduction to How they Work and Why it Matters written by Mark Atwater and published by McGraw Hill Professional. This book was released on 2018-09-14 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to materials and manufacturing concepts and applicationsWritten in a straightforward, conversational style, this comprehensive textbook offers a hands-on introduction to materials science and manufacturing techniques. You will explore metallic and nonmetallic materials, their properties and applications, and how products are made from them, including traditional, additive, and advanced manufacturing methods. Materials and Manufacturing: An Introduction to How They Work and Why It Matters starts off by explaining materials science fundamentals and progresses to outline manufacturing processes in the order in which they are often employed. Coverage includes:•Metallic materials and processing•Nonmetallic materials and processing•Practical considerations in materials and manufacturing•Material structure, identification, and application•Compositional and property-based classification•Mechanical, thermal, and environmental concepts•Methods of testing materials•Sawing, broaching, filing, and abrasive machining•Milling, turning, boring, and hole making operations•Cohesive assembly through heat and chemical welding•Mechanical and adhesive assembly and finishing operations•The benefits and roles of additive and advanced manufacturing

Download or read book Solid State Metal Additive Manufacturing written by Hang Z. Yu and published by John Wiley & Sons. This book was released on 2024-07-10 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timely summary of state-of-the-art solid-state metal 3D printing technologies, focusing on fundamental processing science and industrial applications Solid-State Metal Additive Manufacturing: Physics, Processes, Mechanical Properties, and Applications provides detailed and in-depth discussion on different solid-state metal additive manufacturing processes and applications, presenting associated methods, mechanisms and models, and unique benefits, as well as a detailed comparison to traditional fusion-based metal additive manufacturing. The text begins with a high-level overview of solid-state metal additive manufacturing with an emphasis on its position within the metal additive manufacturing spectrum and its potential for meeting specific demands in the aerospace, automotive, and defense industries. Next, each of the four categories of solid-state additive technologies—cold spray additive manufacturing, additive friction stir deposition, ultrasonic additive manufacturing, and sintering-based processes—is discussed in depth, reviewing advances in processing science, metallurgical science, and innovative applications. Finally, the future direction of these solid-state processes, especially the material innovation and artificial intelligence aspects, are discussed. Sample topics covered in Solid-State Metal Additive Manufacturing include: Physical processes and bonding mechanisms in impact-induced bonding and microstructures and microstructural evolution in cold sprayed materials Process fundamentals, dynamic microstructure evolution, and potential industrial applications of additive friction stir deposition Microstructural and mechanical characterization and industrial applications of ultrasonic additive manufacturing Principles of solid-state sintering, binder jetting-based metal printing, and sintering-based metal additive manufacturing methods for magnetic materials Critical issues inherent to melting and solidification, such as porosity, high residual stress, cast microstructure, anisotropic mechanical properties, and hot cracking Solid-State Metal Additive Manufacturing is an essential reference on the subject for academic researchers in materials science, mechanical, and biomedicine, as well as professional engineers in various manufacturing industries, especially those involved in building new additive technologies.

Download or read book Modern Manufacturing Processes written by Muammer Koç and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.

Download or read book Metal Additive Manufacturing written by Dyuti Sarker and published by John Wiley & Sons. This book was released on 2021-10-26 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: METAL ADDITIVE MANUFACTURING A comprehensive review of additive manufacturing processes for metallic structures Additive Manufacturing (AM)—also commonly referred to as 3D printing—builds three-dimensional objects by adding materials layer by layer. Recent years have seen unprecedented investment in additive manufacturing research and development by governments and corporations worldwide. This technology has the potential to replace many conventional manufacturing processes, enable the development of new industry practices, and transform the entire manufacturing enterprise. Metal Additive Manufacturing provides an up-to-date review of all essential physics of metal additive manufacturing techniques with emphasis on both laser-based and non-laser-based additive manufacturing processes. This comprehensive volume covers fundamental processes and equipment, governing physics and modelling, design and topology optimization, and more. The text adresses introductory, intermediate, and advanced topics ranging from basic additive manufacturing process classification to practical and material design aspects of additive manufacturability. Written by a panel of expert authors in the field, this authoritative resource: Provides a thorough analysis of AM processes and their theoretical foundations Explains the classification, advantages, and applications of AM processes Describes the equipment required for different AM processes for metallic structures, including laser technologies, positioning devices, feeder and spreader mechanisms, and CAD software Discusses the opportunities, challenges, and current and emerging trends within the field Covers practical considerations, including design for AM, safety, quality assurance, automation, and real-time control of AM processes Includes illustrative cases studies and numerous figures and tables Featuring material drawn from the lead author’s research and professional experience on laser additive manufacturing, Metal Additive Manufacturing is an important source for manufacturing professionals, research and development engineers in the additive industry, and students and researchers involved in mechanical, mechatronics, automatic control, and materials engineering and science.