Download or read book MEGADESIGN and MegaOpt German Initiatives for Aerodynamic Simulation and Optimization in Aircraft Design written by Norbert Kroll and published by Springer Science & Business Media. This book was released on 2009-11-18 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains results of the German CFD initiative MEGADESIGN which combines CFD development activities from DLR, universities and aircraft industry. Based on the DLR flow solvers FLOWer and TAU the main objectives of the four-years project is to ensure the prediction accuracy with a guaranteed error bandwidth for certain aircraft configurations at design conditions, to reduce the simulation turn-around time for large-scale applications significantly, to improve the reliability of the flow solvers for full aircraft configurations in the complete flight regime, to extend the flow solvers to allow for multidisciplinary simulations and to establish numerical shape optimization as a vital tool within the aircraft design process. This volume highlights recent improvements and enhancements of the flow solvers as well as new developments with respect to aerodynamic and multidisciplinary shape optimization. Improved numerical simulation capabilities are demonstrated by several industrial applications.

Download or read book AeroStruct Enable and Learn How to Integrate Flexibility in Design written by Ralf Heinrich and published by Springer. This book was released on 2018-01-30 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the German research initiative AeroStruct, a three-year collaborative project between universities and the aircraft industry. It describes the development of an integrated multidisciplinary simulation environment for aircraft analysis and optimization using high-fidelity methods. This system is able to run at a high level of automatism, thus representing a step forward with respect to previous ones. Its special features are: a CAD description that is independent from the disciplines involved, an automated CFD mesh generation and an automated structure model generation including a sizing process. The book also reports on test cases by both industrial partners and DLR demonstrating the advantages of the new environment and its suitability for the industry. These results were also discussed during the AeroStruct closing Symposium, which took place on 13-14 October 2015 at the DLR in Braunschweig, Germany. The book provides expert readers with a timely report on multidisciplinary aircraft design and optimization. Thanks to a good balance between theory and practice, it is expected to address an audience of both academics and professional, and to offer them new ideas for future research and development.

Download or read book Constrained Optimization and Optimal Control for Partial Differential Equations written by Günter Leugering and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special volume focuses on optimization and control of processes governed by partial differential equations. The contributors are mostly participants of the DFG-priority program 1253: Optimization with PDE-constraints which is active since 2006. The book is organized in sections which cover almost the entire spectrum of modern research in this emerging field. Indeed, even though the field of optimal control and optimization for PDE-constrained problems has undergone a dramatic increase of interest during the last four decades, a full theory for nonlinear problems is still lacking. The contributions of this volume, some of which have the character of survey articles, therefore, aim at creating and developing further new ideas for optimization, control and corresponding numerical simulations of systems of possibly coupled nonlinear partial differential equations. The research conducted within this unique network of groups in more than fifteen German universities focuses on novel methods of optimization, control and identification for problems in infinite-dimensional spaces, shape and topology problems, model reduction and adaptivity, discretization concepts and important applications. Besides the theoretical interest, the most prominent question is about the effectiveness of model-based numerical optimization methods for PDEs versus a black-box approach that uses existing codes, often heuristic-based, for optimization.

Download or read book Mechanical Design Engineering Handbook written by Peter Childs and published by Elsevier. This book was released on 2024-10-01 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Design Engineering Handbook, Third Edition discusses the mechanical engineering skills that are essential to power generation, production, and transportation. Machine elements such as bearings, shafts, gears, belts, chains, clutches and belts represent fundamental building blocks for a wide range of technology applications. The aim of this handbook is to present an overview of the design process and to introduce the technology and selection of specific machine elements that are fundamental to a wide range of mechanical engineering design applications. This book includes detailed worked examples for the design and application of machine elements and over 600 images, with line drawings complemented by solid model illustrations to aid understanding of the machine elements and assemblies concerned. The context for engineering and mechanical design is introduced in the first chapter, which also presents a blended design process, incorporating principles from systematic and holistic design, as well as practical project management. - Provides a comprehensive treatment of machine elements, including bearings, gears, shafts, clutches, brakes, belts, chains, springs, wire rope, hydraulics, and pneumatics - Presents the design and selection of flow charts - Includes over 600 illustrations, presenting the technologies and their implementation - Covers detailed, worked examples throughout

Download or read book ADIGMA A European Initiative on the Development of Adaptive Higher Order Variational Methods for Aerospace Applications written by Norbert Kroll and published by Springer Science & Business Media. This book was released on 2010-09-18 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains results gained from the EU-funded 6th Framework project ADIGMA (Adaptive Higher-order Variational Methods for Aerodynamic Applications in Industry). The goal of ADIGMA was the development and utilization of innovative adaptive higher-order methods for the compressible flow equations enabling reliable, mesh independent numerical solutions for large-scale aerodynamic applications in aircraft industry. The ADIGMA consortium was comprised of 22 organizations which included the main European aircraft manufacturers, the major European research establishments and several universities, all with well proven expertise in Computational Fluid Dynamics (CFD). The book presents an introduction to the project, exhibits partners’ methods and approaches and provides a critical assessment of the newly developed methods for industrial aerodynamic applications. The best numerical strategies for integration as major building blocks for the next generation of industrial flow solvers are identified.

Download or read book Computational Optimization of Systems Governed by Partial Differential Equations written by Alfio Borzi and published by SIAM. This book was released on 2011-01-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fills a gap between theory-oriented investigations in PDE-constrained optimization and the practical demands made by numerical solutions of PDE optimization problems. The authors discuss computational techniques representing recent developments that result from a combination of modern techniques for the numerical solution of PDEs and for sophisticated optimization schemes. The book offers readers a combined treatment of PDE-constrained optimization and uncertainties and an extensive discussion of multigrid optimization. It provides a bridge between continuous optimization and PDE modeling and focuses on the numerical solution of the corresponding problems.

Download or read book Mechanical Design written by P.R.N. Childs and published by Butterworth-Heinemann. This book was released on 2021-06-29 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Design: Theory and Applications, Third Edition introduces the design and selection of common mechanical engineering components and machine elements, hence providing the foundational "building blocks" engineers needs to practice their art. In this book, readers will learn how to develop detailed mechanical design skills in the areas of bearings, shafts, gears, seals, belt and chain drives, clutches and brakes, and springs and fasteners. Where standard components are available from manufacturers, the steps necessary for their specification and selection are thoroughly developed. Descriptive and illustrative information is used to introduce principles, individual components, and the detailed methods and calculations that are necessary to specify and design or select a component. As well as thorough descriptions of methodologies, this book also provides a wealth of valuable reference information on codes and regulations. - Presents new material on key topics, including actuators for robotics, alternative design methodologies, and practical engineering tolerancing - Clearly explains best practice for design decision-making - Provides end-of-chapter case studies that tie theory and methods together - Includes up-to-date references on all standards relevant to mechanical design, including ASNI, ASME, BSI, AGMA, DIN and ISO

Download or read book Summary of Flow Modulation and Fluid Structure Interaction Findings written by Wolfgang Schröder and published by Springer Science & Business Media. This book was released on 2010-05-16 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Collaborative Research Center SFB 401: Flow Modulation and Fluid-Structure Interaction at Airplane Wings investigates numerically and experimentally fundamental problems of very high capacity aircraft having large elastic wings. This issue summarizes the findings of the 12-year research program at RWTH Aachen University which was funded by the Deutsche Forschungsgemeinschaft (DFG) from 1997 through 2008. The research program covered the following three main topics of large transport aircraft: (i) Model flow, wakes, and vortices of airplanes in high-lift-configuration, (ii) Numerical tools for large scale adaptive flow simulation based on multiscale analysis and a parametric mapping concept for grid generation, and (iii) Validated computational design tools based on direct aeroelastic simulation with reduced structural models.

Download or read book New Results in Numerical and Experimental Fluid Mechanics VII written by Andreas Dillmann and published by Springer Science & Business Media. This book was released on 2010-10-05 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: th This volume contains the papers presented at the 16 DGLR/STAB-Symposium held at the Eurogress Aachen and organized by RWTH Aachen University, Germany, November, 3 - 4, 2008. STAB is the German Aerospace Aerodynamics Association, founded towards the end of the 1970's, whereas DGLR is the German Society for Aeronautics and Astronautics (Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal Oberth e.V.). The mission of STAB is to foster development and acceptance of the discipline “Aerodynamics” in Germany. One of its general guidelines is to concentrate resources and know-how in the involved institutions and to avoid duplication in research work as much as possible. Nowadays, this is more necessary than ever. The experience made in the past makes it easier now, to obtain new knowledge for solving today's and tomorrow's problems. STAB unites German scientists and engineers from universities, research-establishments and industry doing research and project work in numerical and experimental fluid mechanics and aerodynamics for aerospace and other applications. This has always been the basis of numerous common research activities sponsored by different funding agencies. Since 1986 the symposium has taken place at different locations in Germany every two years. In between STAB workshops regularly take place at the DLR in Göttingen.

Download or read book Progress in Hybrid RANS LES Modelling written by Shia-Hui Peng and published by Springer Science & Business Media. This book was released on 2010-09-17 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid modelling of turbulent flows, combining RANS and LES techniques, has received increasing attention over the past decade to fill the gap between (U)RANS and LES computations in aerodynamic applications at industrially relevant Reynolds numbers. With the advantage of hybrid RANS-LES modelling approaches, being considerably more computationally efficient than full LES and more accurate than (U)RANS, particularly for unsteady aerodynamic flows, has motivated numerous research and development activities. These activities have been increasingly stimulated by the provision of modern computing facilities. The present book contains the contributions presented at the Third Symposium on Hybrid RANS-LES Methods, held in Gdansk, Poland, 10-12 June 2009. To a certain extent, this conference was a continuation of the first symposium taking place in Stockholm (Sweden, 2005) and the second in Corfu (Greece, 2007). Motivated by the extensive interest in the research community, the papers presented at the Corfu symposium were published by Springer in the book entitled “Advances in Hybrid RANS-LES Modelling” (in Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Vol. 97). At the Gdansk symposium, along with four invited keynotes, given respectively by S. Fu, U. Michel, M. Sillen and P. Spalart, another 28 papers were presented on the following topics: Unsteady RANS, LES, Improved DES Methods, Hybrid RANS-LES Methods, DES versus URANS and other Hybrid Methods, Modelli- related Numerical Issues and Industrial Applications. After the symposium all full papers have been further reviewed and revised for publication in the present book.

Download or read book Computational Science and High Performance Computing IV written by Egon Krause and published by Springer Science & Business Media. This book was released on 2011-01-21 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 27 contributions to the Forth Russian-German Advanced Research Workshop on Computational Science and High Performance Computing presented in October 2009 in Freiburg, Germany. The workshop was organized jointly by the High Performance Computing Center Stuttgart (HLRS), the Institute of Computational Technologies of the Siberian Branch of the Russian Academy of Sciences (ICT SB RAS) and the Section of Applied Mathematics of the University of Freiburg (IAM Freiburg) The contributions range from computer science, mathematics and high performance computing to applications in mechanical and aerospace engineering. They show a wealth of theoretical work and simulation experience with a potential of bringing together theoretical mathematical modelling and usage of high performance computing systems presenting the state of the art of computational technologies.

Download or read book Fundamental Medical and Engineering Investigations on Protective Artificial Respiration written by Michael Klaas and published by Springer Science & Business Media. This book was released on 2011-04-11 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of papers from the research program “Protective Artificial Respiration (PAR)”. In 2005 the German Research Association DFG launched the research program PAR which is a joint initiative of medicine and fluid mechanics. The main long-term objective of this program is the development of a more protective artificial respiratory system to reduce the physical stress of patients undergoing artificial respiration. To satisfy this goal 11 projects have been defined. In each of these projects scientists from medicine and fluid mechanics do collaborate in several experimental and numerical investigations to improve the fundamental knowledge on respiration and to develop a more individual artificial breathing concept.

Download or read book Turbulence and Interactions written by Michel Deville and published by Springer Science & Business Media. This book was released on 2010-09-28 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains six keynote lectures and 44 contributed papers of the TI 2009 conference that was held in Saint-Luce, La Martinique, May 31-June 5, 2009. These lectures address the latest developments in direct numerical simulations, large eddy simulations, compressible turbulence, coherent structures, droplets, two-phase flows, etc. The present monograph is a snapshot of the state-of-the-art in the field of turbulence with a broad view on theory, experiments and numerical simulations.

Download or read book Unsteady Effects of Shock Wave induced Separation written by Piotr Doerffer and published by Springer Science & Business Media. This book was released on 2010-11-25 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains description of experimental and numerical results obtained in the UFAST project. The goal of the project was to generate experiment data bank providing unsteady characteristics of the shock boundary layer interaction. The experiments concerned basic-reference cases and the cases with application of flow control devices. Obtained new data bank have been used for the comparison with available simulation techniques, starting from RANS, through URANS, LES and hybrid RANS-LES methods. New understanding of flow physics as well as ability of different numerical methods in the prediction of such unsteady flow phenomena will be discussed.

Download or read book Noise and Vibration Mitigation for Rail Transportation Systems written by Tatsuo Maeda and published by Springer Science & Business Media. This book was released on 2011-10-30 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the contributions to the 10th International Workshop on Railway Noise, held October 18–22, 2010, in Nagahama, Japan, organized by the Railway Technical Research Institute (RTRI), Japan. With 11 sessions and 3 poster sessions, the workshop featured presentations by international leaders in the field of railway noise and vibration. All subjects relating to 1. prospects, legal regulation, and perception; 2. wheel and rail noise; 3. structure-borne noise and squeal noise; 4. ground-borne vibration; 5. aerodynamic noise and micro-pressure waves from tunnel portals; 6. interior noise and sound barriers; and 7. prediction, measurements, and monitoring are addressed here. This book is a useful “state-of-the-art” reference for scientists and engineers involved in solving environmental problems of railways.

Download or read book Nature Inspired Fluid Mechanics written by Cameron Tropea and published by Springer Science & Business Media. This book was released on 2012-02-22 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the closing report of the national priority program Nature-Inspired Fluid Mechanics (Schwerpunktprogramm SPP 1207: Strömungsbeeinflussung in der Natur und Technik). Nature-inspired fluid mechanics is one subset of biomimetics, a discipline which has received increased attention over the last decade, with numerous faculties and degree courses devoted solely to exploring ‘nature as a model’ for engineering applications. To save locomotion energy, evolution has optimized the design of animals such that friction loss is minimized. In addition to many morphological adaptations, animals that are often exposed to water or air currents have developed special behaviors that allow them to use the energy contained in air or water fluctuations for energy savings. Such flow manipulation and control is not only important for many animals, but also for many engineering applications. Since living beings have been optimized by several million years of evolution it is very likely that many engineering disciplines can profit from the study of systems found in nature. Curiously, there has been little serious cross-disciplinary work and information exchange on the topic of fluid dynamics and flow control and this was the initial motivation to establish this national priority program.

Download or read book Mechanical Design Engineering Handbook written by Peter Childs and published by Butterworth-Heinemann. This book was released on 2013-09-02 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Design Engineering Handbook is a straight-talking and forward-thinking reference covering the design, specification, selection, use and integration of machine elements fundamental to a wide range of engineering applications. Develop or refresh your mechanical design skills in the areas of bearings, shafts, gears, seals, belts and chains, clutches and brakes, springs, fasteners, pneumatics and hydraulics, amongst other core mechanical elements, and dip in for principles, data and calculations as needed to inform and evaluate your on-the-job decisions. Covering the full spectrum of common mechanical and machine components that act as building blocks in the design of mechanical devices, Mechanical Design Engineering Handbook also includes worked design scenarios and essential background on design methodology to help you get started with a problem and repeat selection processes with successful results time and time again. This practical handbook will make an ideal shelf reference for those working in mechanical design across a variety of industries and a valuable learning resource for advanced students undertaking engineering design modules and projects as part of broader mechanical, aerospace, automotive and manufacturing programs. - Clear, concise text explains key component technology, with step-by-step procedures, fully worked design scenarios, component images and cross-sectional line drawings all incorporated for ease of understanding - Provides essential data, equations and interactive ancillaries, including calculation spreadsheets, to inform decision making, design evaluation and incorporation of components into overall designs - Design procedures and methods covered include references to national and international standards where appropriate