Download or read book Medical Image Computing and Computer Assisted Intervention MICCAI 2011 written by Gabor Fichtinger and published by Springer. This book was released on 2011-09-22 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set LNCS 6891, 6892 and 6893 constitutes the refereed proceedings of the 14th International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2011, held in Toronto, Canada, in September 2011. Based on rigorous peer reviews, the program committee carefully selected 251 revised papers from 819 submissions for presentation in three volumes. The first volume includes 86 papers organized in topical sections on robotics, localization and tracking and visualization, planning and image guidance, physical modeling and simulation, motion modeling and compensation, and segmentation and tracking in biological images.
Download or read book Imaging and Visualization in The Modern Operating Room written by Yuman Fong and published by Springer. This book was released on 2015-05-19 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides a state of the art overview of tools for guiding surgeons in the modern operating room. The text explains how many modalities in the current armamentarium of radiologic imaging have been brought to the operating room for real time use. It also explains the current use of near infrared, fluorescent, and chemo-luminescent imaging to guide minimally invasive and open surgery to improve outcome. The book is separated into two sections. The first, discusses the biologic principles that underlie novel visualization of normal organs and pathology. The currently available equipment and equipment anticipated in the near future is covered. The second section summarizes current clinical applications of advanced imaging and visualization in the OR. Novel means of visualizing normal anatomic structures such as nerves, bile duct, and vessels that enhance safety of many operations are covered. Novel biologic imaging using radio-labeled and fluorescent-labeled molecular probes that allow identification of inflammation, vascular abnormalities, and cancer are also discussed. Authored by scientists who pioneer research in optics and radiology, tool makers who use this knowledge to make surgical equipment, and surgeons who innovate the field of surgery using these new operative tools, Imaging and Visualization in the Modern Operating Room is a valuable guide for surgeons, residents and fellows entering the field.
Download or read book Computing and Visualization for Intravascular Imaging and Computer Assisted Stenting written by Simone Balocco and published by Academic Press. This book was released on 2016-12-12 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computing and Visualization for Intravascular Imaging and Computer-Assisted Stenting presents imaging, treatment, and computed assisted technological techniques for diagnostic and intraoperative vascular imaging and stenting. These techniques offer increasingly useful information on vascular anatomy and function, and are poised to have a dramatic impact on the diagnosis, analysis, modeling, and treatment of vascular diseases. After setting out the technical and clinical challenges of vascular imaging and stenting, the book gives a concise overview of the basics before presenting state-of-the-art methods for solving these challenges. Readers will learn about the main challenges in endovascular procedures, along with new applications of intravascular imaging and the latest advances in computer assisted stenting. - Brings together scientific researchers, medical experts, and industry partners working in different anatomical regions - Presents an introduction to the clinical workflow and current challenges in endovascular Interventions - Provides a review of the state-of-the-art methodologies in endovascular imaging and their applications - Poses outstanding questions and discusses future research
Download or read book Shape in Medical Imaging written by Christian Wachinger and published by Springer Nature. This book was released on 2023-10-30 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the proceedings of the International Workshop, ShapeMI 2023, which took place alongside MICCAI 2023 on October 8, 2023, in Vancouver, British Columbia, Canada. The 23 selected full papers deal with all aspects of leading methods and applications for advanced shape analysis and geometric learning in medical imaging.
Download or read book Medical Image Computing and Computer Assisted Intervention MICCAI 2010 written by Tianzi Jiang and published by Springer. This book was released on 2010-09-21 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: The13thInternationalConferenceonMedicalImageComputingandComputer- Assisted Intervention, MICCAI 2010, was held in Beijing, China from 20-24 September,2010.ThevenuewastheChinaNationalConventionCenter(CNCC), China’slargestandnewestconferencecenterwith excellentfacilities andaprime location in the heart of the Olympic Green, adjacent to characteristic constr- tions like the Bird’s Nest (National Stadium) and the Water Cube (National Aquatics Center). MICCAI is the foremost international scienti?c event in the ?eld of medical image computing and computer-assisted interventions. The annual conference has a high scienti?c standard by virtue of the threshold for acceptance, and accordingly MICCAI has built up a track record of attracting leading scientists, engineersandcliniciansfromawiderangeoftechnicalandbiomedicaldisciplines. This year, we received 786 submissions, well in line with the previous two conferences in New York and London. Three program chairs and a program committee of 31 scientists, all with a recognized standing in the ?eld of the conference, were responsible for the selection of the papers. The review process was set up such that each paper was considered by the three program chairs, two program committee members, and a minimum of three external reviewers. The review process was double-blind, so the reviewers did not know the identity of the authors of the submission. After a careful evaluation procedure, in which all controversialand gray area papers were discussed individually, we arrived at a total of 251 accepted papers for MICCAI 2010, of which 45 were selected for podium presentation and 206 for poster presentation. The acceptance percentage (32%) was in keeping with that of previous MICCAI conferences. All 251 papers are included in the three MICCAI 2010 LNCS volumes.
Download or read book Shape Analysis in Medical Image Analysis written by Shuo Li and published by Springer Science & Business Media. This book was released on 2014-01-28 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains thirteen contributions from invited experts of international recognition addressing important issues in shape analysis in medical image analysis, including techniques for image segmentation, registration, modelling and classification and applications in biology, as well as in cardiac, brain, spine, chest, lung and clinical practice. This volume treats topics such as for example, anatomic and functional shape representation and matching; shape-based medical image segmentation; shape registration; statistical shape analysis; shape deformation; shape-based abnormity detection; shape tracking and longitudinal shape analysis; machine learning for shape modeling and analysis; shape-based computer-aided-diagnosis; shape-based medical navigation; benchmark and validation of shape representation, analysis and modeling algorithms. This work will be of interest to researchers, students and manufacturers in the fields of artificial intelligence, bioengineering, biomechanics, computational mechanics, computational vision, computer sciences, human motion, mathematics, medical imaging, medicine, pattern recognition and physics.
Download or read book Medical Imaging and Augmented Reality written by Hongen Liao and published by Springer. This book was released on 2010-09-17 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th International Workshop on Medical Imaging and Augmented Reality, MIAR 2010, was held at the China National Convention Center (CNCC), B- jing, China on September 19–20, 2010. MIAR has remained a truly international meeting, bringing together - searchers from all ?elds related to medical image analysis, visualization and targeted intervention.In recent years,technical advances in therapeutic delivery andagrowingdemandforpatient-speci?ctreatmenthaveacceleratedtheclinical applications of MIAR-related techniques. Imaging plays an increasingly imp- tant role in targeted therapy, with interventions such as drug or gene therapy relying on more accurate delivery tailored to individual patients. Rapid progress in surgical methodologies, such as those with robot assistance, demands p- cise guidance from both preoperative and intraoperative imaging. The volume of data available from existing and emerging imaging modalities leads to a - sire for more automated analysis for diagnosis, segmentation and registration. Research in this rapidly developing area is highly multi-disciplinary, integrating research in life sciences, physical sciences, engineering, and medicine.
Download or read book Clinical Image Based Procedures Translational Research in Medical Imaging written by Marius George Linguraru and published by Springer. This book was released on 2014-12-08 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from the Third International Workshop on Clinical Image-Based Procedures, CLIP 2014, held in conjunction with MICCAI 2014 in Boston, MA, USA, in September 2014. The 19 papers presented in this volume were carefully reviewed and selected from 26 submissions. New strategies are essential to ensure a smooth and effective translation of computational image-based techniques into the clinic. For these reasons CLIP 2014’s major focus is on translational research filling the gaps between basic science and clinical applications. A highlight of the workshop is the subject of strategies for personalized medicine to enhance diagnosis, treatment and interventions. Authors are encouraged to submit work centered on specific clinical applications, including techniques and procedures based on comprehensive clinical image data. Submissions related to applications already in use and evaluated by clinical users are particularly encouraged. The event will bring together world-class specialists to present ways to strengthen links between computer scientists and engineers, and clinicians.
Download or read book Medical Image Computing and Computer Assisted Intervention MICCAI 2012 written by Nicholas Ayache and published by Springer. This book was released on 2012-09-22 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set LNCS 7510, 7511, and 7512 constitutes the refereed proceedings of the 15th International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2012, held in Nice, France, in October 2012. Based on rigorous peer reviews, the program committee carefully selected 252 revised papers from 781 submissions for presentation in three volumes. The second volume includes 82 papers organized in topical sections on cardiovascular imaging: planning, intervention and simulation; image registration; neuroimage analysis; diffusion weighted imaging; image segmentation; computer-assisted interventions and robotics; and image registration: new methods and results.
Download or read book Medical Image Computing and Computer Assisted Intervention MICCAI 2019 written by Dinggang Shen and published by Springer Nature. This book was released on 2019-10-10 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: The six-volume set LNCS 11764, 11765, 11766, 11767, 11768, and 11769 constitutes the refereed proceedings of the 22nd International Conference on Medical Image Computing and Computer-Assisted Intervention, MICCAI 2019, held in Shenzhen, China, in October 2019. The 539 revised full papers presented were carefully reviewed and selected from 1730 submissions in a double-blind review process. The papers are organized in the following topical sections: Part I: optical imaging; endoscopy; microscopy. Part II: image segmentation; image registration; cardiovascular imaging; growth, development, atrophy and progression. Part III: neuroimage reconstruction and synthesis; neuroimage segmentation; diffusion weighted magnetic resonance imaging; functional neuroimaging (fMRI); miscellaneous neuroimaging. Part IV: shape; prediction; detection and localization; machine learning; computer-aided diagnosis; image reconstruction and synthesis. Part V: computer assisted interventions; MIC meets CAI. Part VI: computed tomography; X-ray imaging.
Download or read book Smart Medical Imaging for Diagnosis and Treatment Planning written by Nilanjan Dey and published by CRC Press. This book was released on 2024-07-31 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents advanced research on smart health technologies, focusing on the innovative transformations in diagnosis and treatment planning using medical imaging and data analysed by data science techniques. It shows how smart health technologies leverage artificial intelligence (AI) and big data analytics to provide more accurate and efficient diagnosis and treatment planning. In search for innovative and novel methods and techniques for health technologies and medical data processing, the book • Discusses applications of Artificial Intelligence, Data Science, Machine Learning, Deep Learning, the Internet of Things, Big Data, Cloud Computing; • Includes use of electronic patient records in healthcare, analysis of big data in medical diagnosis, reliability, and challenges of EPR and EHR in smart healthcare; • Explores evolving techniques for smart healthcare, its application in medical imaging and prediction in the fields of treatment planning; • Provides recent studies in AI-driven healthcare technologies and medical imaging to outline insight into smart healthcare technologies; • Discusses the role of big data in smart healthcare, computing techniques for healthcare for medical diagnosis and treatment planning; • Encompasses the ethical and legal challenges of using smart healthcare and medical data. This book serves as a valuable reference for researchers working on smart health technologies. Researchers of medical imaging, artificial intelligence, and data science along with healthcare domain will find it a great resource as well.
Download or read book Patient Specific Modeling in Tomorrow s Medicine written by Amit Gefen and published by Springer Science & Business Media. This book was released on 2012-01-25 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the frontier of research and clinical applications of Patient Specific Modeling, and provides a state-of-the-art update as well as perspectives on future directions in this exciting field. The book is useful for medical physicists, biomedical engineers and other engineers who are interested in the science and technology aspects of Patient Specific Modeling, as well as for radiologists and other medical specialists who wish to be updated about the state of implementation.
Download or read book Soft Tissue Biomechanical Modeling for Computer Assisted Surgery written by Yohan Payan and published by Springer Science & Business Media. This book was released on 2012-04-27 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the biomechanical modeling of biological tissues in the context of Computer Assisted Surgery (CAS). More specifically, deformable soft tissues are addressed since they are the subject of the most recent developments in this field. The pioneering works on this CAS topic date from the 1980's, with applications in orthopaedics and biomechanical models of bones. More recently, however, biomechanical models of soft tissues have been proposed since most of the human body is made of soft organs that can be deformed by the surgical gesture. Such models are much more complicated to handle since the tissues can be subject to large deformations (non-linear geometrical framework) as well as complex stress/strain relationships (non-linear mechanical framework). Part 1 of the volume presents biomechanical models that have been developed in a CAS context and used during surgery. This is particularly new since most of the soft tissues models already proposed concern Computer Assisted Planning, with a pre-operative use of the models. Then, the volume addresses the two key issues raised for an intra-operative use of soft tissues models, namely (Part 2) “how to estimate the in vivo mechanical behavior of the tissues?” (i.e. what are the values of the mechanical parameters that can deliver realistic patient-specific behavior?) and (Part 3) “how to build a modeling platform that provides generic real-time (or at least interactive-time) numerical simulations?”
Download or read book Biomedical Photoacoustics written by Wenfeng Xia and published by Springer Nature. This book was released on with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book XII Mediterranean Conference on Medical and Biological Engineering and Computing 2010 written by Nicolas Pallikarakis and published by Springer Science & Business Media. This book was released on 2010-05-28 with total page 1070 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past three decades, the exploding number of new technologies and applications introduced in medical practice, often powered by advances in biosignal processing and biomedical imaging, created an amazing account of new possibilities for diagnosis and therapy, but also raised major questions of appropriateness and safety. The accelerated development in this field, alongside with the promotion of electronic health care solutions, is often on the basis of an uncontrolled diffusion and use of medical technology. The emergence and use of medical devices is multiplied rapidly and today there exist more than one million different products available on the world market. Despite the fact that the rising cost of health care, partly resulting from the new emerging technological applications, forms the most serious and urgent problem for many governments today, another important concern is that of patient safety and user protection, issues that should never be compromised and expelled from the Biomedical Engineering research practice agenda.
Download or read book Mixed and Augmented Reality in Medicine written by Terry M. Peters and published by CRC Press. This book was released on 2018-10-26 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Augmented reality (AR) is transforming how we work, learn, play and connect with the world, and is now being introduced to the field of medicine, where it is revolutionising healthcare as pioneering virtual elements are being added to real images to provide a more compelling and intuitive view during procedures. This book, which had its beginnings at the AE-CAI: Augmented Environments for Computer-Assisted Interventions MICCAI Workshop in Munich in 2015, is the first to review the area of mixed and augmented reality in medicine. Covering a range of examples of the use of AR in medicine, it explores its relevance to minimally-invasive interventions, how it can improve the accuracy of a procedure and reduce procedure time, and how it may be employed to reduce radiation risks. It also discusses how AR can be an effective tool in the education of physicians, medical students, nurses and other health professionals. Features: An ideal practical guide for medical professionals and students looking to understand the implementation, applications, and future of AR Contains the latest developments and technologies in this innovative field Edited by highly respected pioneers in the field, who have been immersed in AR as well as virtual reality and image-guided surgery since their inception, with chapter contributions from subject area specialists working with AR
Download or read book Prostate Cancer Imaging Computer Aided Diagnosis Prognosis and Intervention written by Anant Madabhushi and published by Springer. This book was released on 2010-09-15 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prostatic adenocarcinoma (CAP) is the second most common malignancy with an estimated 190,000 new cases in the USA in 2010 (Source: American Cancer Society), and is the most frequently diagnosed cancer among men. If CAP is caught early, men have a high, five-year survival rate. Unfortunately there is no standardized ima- based screening protocol for early detection of CAP (unlike for breast cancers). In the USA high levels of prostate-specific antigen (PSA) warrant a trans-rectal ultrasound (TRUS) biopsy to enable histologic confirmation of presence or absence of CAP. With recent rapid developments in multi-parametric radiological imaging te- niques (spectroscopy, dynamic contrast enhanced MR imaging, PET, RF ultrasound), some of these functional and metabolic imaging modalities are allowing for definition of high resolution, multi-modal signatures for prostate cancer in vivo. Distinct com- tational and technological challenges for multi-modal data registration and classifi- tion still remain in leveraging this multi-parametric data for directing therapy and optimizing biopsy. Additionally, with the recent advent of whole slide digital sc- ners, digitized histopathology has become amenable to computerized image analysis. While it is known that outcome of prostate cancer (prognosis) is highly correlated with Gleason grade, pathologists often have difficulty in distinguishing between interme- ate Gleason grades from histopathology. Development of computerized image analysis methods for automated Gleason grading and predicting outcome on histopathology have to confront the significant computational challenges associated with working these very large digitized images.
