Download or read book Introduction to Mechatronics and Measurement Systems written by David G. Alciatore and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 2003 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTRODUCTION TO MECHATRONICS AND MEASUREMENT SYSTEMS provides comprehensive and accessible coverage of the evolving field of mechatronics for mechanical, electrical and aerospace engineering majors. The authors present a concise review of electrical circuits, solid-state devices, digital circuits, and motors- all of which are fundamental to understanding mechatronic systems.Mechatronics design considerations are presented throughout the text, and in "Design Example" features. The text's numerous illustrations, examples, class discussion items, and chapter questions & exercises provide an opportunity to understand and apply mechatronics concepts to actual problems encountered in engineering practice. This text has been tested over several years to ensure accuracy.A text web site is available at http://www.engr.colostate.edu/~dga/mechatronics/ and contains numerous supplemental resources.
Download or read book Introduction to Mechatronics and Measurement Systems written by Michael B. Histand and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Mechatronics and Measurement Systems provides an accessible overview of the evolving field of mechatronics. Michael B. Histand and David G. Alciatore have taken careful steps to present measurement system and electronic engineering fundamentals, which are instrumental in understanding mechatronic systems, to your students. This new text has been class-tested over several years to ensure complete accuracy. In addition to analysis techniques, design considerations are presented throughout the text. The text's numerous illustrations, examples, and problems provide an opportunity to see and apply mechatronics to actual problems encountered in engineering practice.
Download or read book Introduction To Mechatronics And Measurement Systems written by Alciatore and published by . This book was released on 2003 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Mechatronics and Measurement Systems written by David G. Alciatore and published by McGraw-Hill Science/Engineering/Math. This book was released on 2007 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing comprehensive coverage of the field of mechatronics, this book is useful for mechanical, electrical and aerospace engineering majors. It presents a review of electrical circuits, solid-state devices, digital circuits, and motors. It also includes many illustrations, examples, class discussion items, and chapter questions and exercises.
Download or read book Sensors for Mechatronics written by Paul P.L. Regtien and published by Elsevier. This book was released on 2012-01-17 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics is a multidisciplinary field combining Mechanical, Electronic, Computer, and other Engineering fields to develop intelligent processes and products. Based on thirty years of extensive work in industry and teaching, this book provides an overview of the sensors and sensor systems required and applied in mechatronics with an emphasis on understanding the physical principles and possible configurations of sensors rather than simply a discussion of particular types of sensors. Well illustrated with examples of commercially available sensors and of recent and future developments, this book offers help in achieving the best solution to various kinds of sensor problems encountered in mechatronics. In a clear and detailed manner, the author reviews the major types of transducers, presents a characterization of the state-of-the-art in sensing technology and offers a view on current sensor research. This book will be a vital resource for practicing engineers and students in the field. - Comprehensive coverage of a wide variety of sensor concepts and basic measurement configurations encountered in the mechatronics domain - Written by a recognized expert in the field who has extensive experience in industry and teaching - Suitable for practicing engineers and those wanting to learn more about sensors in mechatronics
Download or read book The Design of High Performance Mechatronics 2nd Revised Edition written by R. Munnig Schmidt and published by IOS Press. This book was released on 2014-01-08 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives. This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS. As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this book includes an overview of systems engineering, optics and precision measurement systems, in an attempt to establish a connection between these fields under one umbrella. Robert Munnig Schmidt is professor in Mechatronic System Design at Delft University of Technology with industrial experience at Philips and ASML in research and development of consumer and high-tech systems. He is also director of RMS Acoustics & Mechatronics, doing research and development on active controlled low frequency sound systems. Georg Schitter is professor at the Automation and Control Institute (ACIN) at Vienna University of Technology with a standing track record in research on the control and mechatronic design of extremely fast precision motion systems such as video rate AFM systems. Adrian Rankers is managing partner of Mechatronics Academy, developing and delivering high level courses to the industrial community, based on industrial experience at Philips in the research and development of consumer and high-tech systems. Jan van Eijk is emeritus professor in Advanced Mechatronics at Delft University of Technology. He is also director of MICE BV and partner at Mechatronics Academy, acting as industrial R&D advisor and teacher with experience at Philips in the research and development of consumer and high-tech systems.
Download or read book Mechatronic Systems Design written by Klaus Janschek and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this textbook, fundamental methods for model-based design of mechatronic systems are presented in a systematic, comprehensive form. The method framework presented here comprises domain-neutral methods for modeling and performance analysis: multi-domain modeling (energy/port/signal-based), simulation (ODE/DAE/hybrid systems), robust control methods, stochastic dynamic analysis, and quantitative evaluation of designs using system budgets. The model framework is composed of analytical dynamic models for important physical and technical domains of realization of mechatronic functions, such as multibody dynamics, digital information processing and electromechanical transducers. Building on the modeling concept of a technology-independent generic mechatronic transducer, concrete formulations for electrostatic, piezoelectric, electromagnetic, and electrodynamic transducers are presented. More than 50 fully worked out design examples clearly illustrate these methods and concepts and enable independent study of the material.
Download or read book Control of Mechatronic Systems written by Patrick O. J. Kaltjob and published by John Wiley & Sons. This book was released on 2021-04-12 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical methodology for designing integrated automation control for systems and processes Implementing digital control within mechanical-electronic (mechatronic) systems is essential to respond to the growing demand for high-efficiency machines and processes. In practice, the most efficient digital control often integrates time-driven and event-driven characteristics within a single control scheme. However, most of the current engineering literature on the design of digital control systems presents discrete-time systems and discrete-event systems separately. Control Of Mechatronic Systems: Model-Driven Design And Implementation Guidelines unites the two systems, revisiting the concept of automated control by presenting a unique practical methodology for whole-system integration. With its innovative hybrid approach to the modeling, analysis, and design of control systems, this text provides material for mechatronic engineering and process automation courses, as well as for self-study across engineering disciplines. Real-life design problems and automation case studies help readers transfer theory to practice, whether they are building single machines or large-scale industrial systems. Presents a novel approach to the integration of discrete-time and discrete-event systems within mechatronic systems and industrial processes Offers user-friendly self-study units, with worked examples and numerous real-world exercises in each chapter Covers a range of engineering disciplines and applies to small- and large-scale systems, for broad appeal in research and practice Provides a firm theoretical foundation allowing readers to comprehend the underlying technologies of mechatronic systems and processes Control Of Mechatronic Systems is an important text for advanced students and professionals of all levels engaged in a broad range of engineering disciplines.
Download or read book Mechatronics and Measurement Systems written by Michael B. Histand and published by . This book was released on 1997 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emerging Trends in Mechatronics written by Aydin Azizi and published by BoD – Books on Demand. This book was released on 2020-01-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics is a multidisciplinary branch of engineering combining mechanical, electrical and electronics, control and automation, and computer engineering fields. The main research task of mechatronics is design, control, and optimization of advanced devices, products, and hybrid systems utilizing the concepts found in all these fields. The purpose of this special issue is to help better understand how mechatronics will impact on the practice and research of developing advanced techniques to model, control, and optimize complex systems. The special issue presents recent advances in mechatronics and related technologies. The selected topics give an overview of the state of the art and present new research results and prospects for the future development of the interdisciplinary field of mechatronic systems.
Download or read book Measurement Systems and Sensors Second Edition written by Waldemar Nawrocki and published by Artech House. This book was released on 2016-01-01 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thoroughly updated and expanded second edition is an authoritative resource on industrial measurement systems and sensors, with particular attention given to temperature, stress, pressure, acceleration, and liquid flow sensors. This edition includes new and expanded chapters on wireless measuring systems and measurement control and diagnostics systems in cars. Moreover, the book introduces new, cost-effective measurement technology utilizing www servers and LAN computer networks - a topic not covered in any other resource. Coverage of updated wireless measurement systems and wireless GSM/LTE interfacing make this book unique, providing in-depth, practical knowledge. Professionals learn how to connect an instrument to a computer or tablet while reducing the time for collecting and processing measurement data. This hands-on reference presents digital temperature sensors, demonstrating how to design a monitoring system with multipoint measurements. From computer-based measuring systems, electrical thermometers and pressure sensors, to conditioners, crate measuring systems, and virtual instruments, this comprehensive title offers engineers the details they need for their work in the field.
Download or read book The Design of High Performance Mechatronics written by R. Munnig Schmidt and published by IOS Press. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives.This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS.As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this book includes an overview of systems engineering, optics and precision measurement systems, in an attempt to establish a connection between these fields under one umbrella.Robert Munnig Schmidt is professor in Mechatronic System Design at Delft University of Technology with industrial experience at Philips and ASML in research and development of consumer and high-tech systems. He is also director of RMS Acoustics & Mechatronics, doing research and development on active controlled low frequency sound systems.Georg Schitter is professor at the Automation and Control Institute (ACIN) at Vienna University of Technology with a standing track record in research on the control and mechatronic design of extremely fast precision motion systems such as video rate AFM systems.Adrian Rankers is managing partner of Mechatronics Academy, developing and delivering high level courses to the industrial community, based on industrial experience at Philips in the research and development of consumer and high-tech systems.Jan van Eijk is emeritus professor in Advanced Mechatronics at Delft University of Technology. He is also director of MICE BV and partner at Mechatronics Academy, acting as industrial R&D advisor and teacher with experience at Philips in the research and development of consumer and high-tech systems.
Download or read book Mechatronics written by Clarence W. de Silva and published by CRC Press. This book was released on 2004-11-29 with total page 1348 pages. Available in PDF, EPUB and Kindle. Book excerpt: While most books on the subject present material only on sensors and actuators, hardware and simulation, or modeling and control, Mechatronics: An Integrated Approach presents all of these topics in a single, unified volume from which users with a variety of engineering backgrounds can benefit. The integrated approach emphasizes the design and inst
Download or read book The Mechatronics Handbook 2 Volume Set written by Robert H. Bishop and published by CRC Press. This book was released on 2018-10-08 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive reference on mechatronics, The Mechatronics Handbook was quickly embraced as the gold standard in the field. From washing machines, to coffeemakers, to cell phones, to the ubiquitous PC in almost every household, what, these days, doesn’t take advantage of mechatronics in its design and function? In the scant five years since the initial publication of the handbook, the latest generation of smart products has made this even more obvious. Too much material to cover in a single volume Originally a single-volume reference, the handbook has grown along with the field. The need for easy access to new material on rapid changes in technology, especially in computers and software, has made the single volume format unwieldy. The second edition is offered as two easily digestible books, making the material not only more accessible, but also more focused. Completely revised and updated, Robert Bishop’s seminal work is still the most exhaustive, state-of-the-art treatment of the field available.
Download or read book Mechatronics with Experiments written by Sabri Cetinkunt and published by John Wiley & Sons. This book was released on 2015-01-20 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensively covers the fundamental scientific principles and technologies that are used in the design of modern computer-controlled machines and processes. Covers embedded microcontroller based design of machines Includes MATLAB®/Simulink®-based embedded control software development Considers electrohydraulic motion control systems, with extensive applications in construction equipment industry Discusses electric motion control, servo systems, and coordinated multi-axis automated motion control for factory automation applications Accompanied by a website hosting a solution manual
Download or read book Mechatronics written by Godfrey Onwubolu and published by Elsevier. This book was released on 2005-05-25 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics is a core subject for engineers, combining elements of mechanical and electronic engineering into the development of computer-controlled mechanical devices such as DVD players or anti-lock braking systems. This book is the most comprehensive text available for both mechanical and electrical engineering students and will enable them to engage fully with all stages of mechatronic system design. It offers broader and more integrated coverage than other books in the field with practical examples, case studies and exercises throughout and an Instructor's Manual. A further key feature of the book is its integrated coverage of programming the PIC microcontroller, and the use of MATLAB and Simulink programming and modelling, along with code files for downloading from the accompanying website.*Integrated coverage of PIC microcontroller programming, MATLAB and Simulink modelling*Fully developed student exercises, detailed practical examples*Accompanying website with Instructor's Manual, downloadable code and image bank
Download or read book A Textbook of Mechatronics written by RK Rajput and published by S. Chand Publishing. This book was released on 2007 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Textbook of Mechatronics is a comprehensive textbook for the students of Mechanical Engineering and a mustbuy for the aspirants of different entrance examinations including GATE and UPSC. Divided into 10 chapters, the book delves into the subject beginning from Basic Concepts and goes on to discuss elements of CNC Machines and Robotics. The book also becomes useful as a question bank for students as it offers university questions with answers.
