Download or read book Polymer Degradation and Stabilisation written by Norman Grassie and published by CUP Archive. This book was released on 1988-04-14 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of polymer degradation and stabilisation is of considerable practical importance as the industrial uses of polymeric materials continue to expand. In this book, the authors lucidly relate technological phenomena to the chemistry and physics of degradation and stabilisation processes. Degradation embraces a variety of technologically important phenomena ranging from relatively low temperature processes such as 'weathering' of plastics, 'fatigue' of rubbers through the processing of polymers in shearing mixers to very high temperature processes such as flammability and ablation. All these technological phenomena have in common certain basic chemical reactions. Thus 'weathering' has its roots in photo-oxidation, 'fatigue' and melt-degradation in mechano-oxidation and flammability, and ablation in ablation in pyrolysis and vapour phase oxidation.
Download or read book Fundamentals of Polymer Degradation and Stabilization written by N.S. Allen and published by Springer Science & Business Media. This book was released on 1992-10-31 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade, the field of polymer degradation and stabilization has become a subject of central importance in polymer science and technology. This book provides a fundamental source of information designed for those with only a basic understanding of the background of the field.
Download or read book Mechanisms of Polymer Degradation and Stabilisation written by G. Scott and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this publication is two-fold. In the first place it is intended to review progress in the development of practical stabilising systems for a wide range of polymers and applications. A complemen tary and ultimately more important objective is to accommodate these practical developments within the framework of antioxidant theory, since there can be little question that further major advances in the practice of stabilisation technology will only be possible on a firm mechanistic foundation. With the continual increase in the number of commercial anti oxidants and stabilisers, often functioning by mechanisms not even considered ten years ago, there is a need for a general theory which will allow the potential user to predict the performance of a particular antioxidant structure under specific practical conditions. Any such predictive tool must involve a simplified kinetic approach to inhibited oxidation and, in Chapter 1, Denisov outlines a possible mechanistic approach with the potential to predict the most useful antioxidant to use and the limits of its usefulness. In Chapter 2, Schwetlick reviews the current state of knowledge on the antioxidant mechanisms of the phosphite esters with particular emphasis on their catalytic peroxidolytic activity. Dithiophosphate v vi PREFACE derivatives show a similar behaviour but for quite different reasons and, in Chapter 3, AI-Malaika reviews information available from analytical studies, particularly using 31p_NMR spectroscopy, to elucid ate the complex chemistry that leads to the formation of the antioxidant -active agents.
Download or read book Polymer Degradation and Stabilization written by W. L. Hawkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of polymers as an important class of material was inhibited at the first by the premature failure of these versatile compounds in many applications. The deterioration of important properties of both natural and synthetic polymers is the result of irreversible changes in composition and structure of polymers molecules. As a result of these reactions, mechanical, electrical and/or aesthetic properties are degraded beyond acceptable limits. It is now generally recognized that stabilization against degradation is necessary if the useful life of polymers is to be extended sufficiently to meet design requirements for long-term applications. Polymers degrade by a wide variety of mechanisms, several of which affect all polymers through to varying degree. This monograph will concentrate on those degradation mechanisms which result from reactions of polymers with oxygen in its various forms and which are accelerated by heat and/or radiation. Those stabilization mechanisms are discussed which are based on an understanding of degradation reaction mechanisms that are reasonably well established. The stabilization of polymers is still undergoing a transition from an art to a science as mechanisms of degradation become more fully developed. A scientific approach to stabilization can only be approached when there is an understanding of the reactions that lead to degradation. Stabilization against biodegradation and burning will not be discussed since there is not a clear understanding of how polymers degrade under these conditions.
Download or read book Techniques and Mechanisms of Polymer Degradation and Stabilization written by Norman Grassie and published by . This book was released on 1989 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Stabilisation Mechanisms and Applications written by N. C. Billingham and published by . This book was released on 1991 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Degradation of Polymeric Materials written by Krzysztof Pielichowski and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the thermal degradation of polymers is of paramount importance for developing a rational technology of polymer processing and higher-temperature applications. Controlling degradation requires understanding of many different phenomena, including chemical mechanisms, the influence of polymer morphology, the complexities of oxidation chemistry, and the effects of stabilisers, fillers and other additives. This book offers a wealth of information for polymer researchers and processors requiring an understanding of the implications of thermal degradation on material and product performance.
Download or read book Degradation and Stabilisation of PVC written by J. Owen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyvinyl chloride has played a key role in the development of the plastics industry over the past 40 years and continues to be a polymer of major importance. The reasons for its enormous versatility and range of application derive from a combination of the basic structure which gives rise to a relatively tough and rigid material and its ability to accept a range of plasticisers and other additives which can modify its physical characteristics to produce a range of flexible products. Two major problems, however, have tested the skill and ingenuity of PVC technologists since earliest times. One is the thermal instability of the material at the temperatures required for melt processing and fabrication, and the second is the photochemical instability which until recently has limited the potentially large range of outdoor applications. Both problems have been handled in a commercially satisfactory way by the gradual development of a range of stabilisers, lubricants and other processing aids and the high quality material which has resulted has led to massive utilisation of PVC by industry. Totally adequate stabilisation requires a detailed understanding of the mechanisms by which degradation processes are initiated and propagated. Although great advances have been made in this respect in recent years the problem remains incompletely understood. This book presents an account of the present position and the problems which remain to be solved.
Download or read book Degradation and Stabilisation of Polymers written by G. Geuskens and published by . This book was released on 1975 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photodegradation and Light Stabilization of Heterochain Polymers written by Niyazi and published by CRC Press. This book was released on 2006-11-14 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photodegradation and light stabilization are very important aspects of polymer aging. Polymer degradation includes different types of processes: thermodegradation, oxidation, acting of ozone, photodegradation, radiation, hydrolysis, mechanical degradation, and biodegradation. It is very important to know the mechanism of polymer degradation in orde
Download or read book Polymer Degradation Mechanisms written by United States. National Bureau of Standards and published by . This book was released on 1953 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stabilization of Polymeric Materials written by Hans Zweifel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics are used worldwide in everyday life, e.g. as food packaging, electronics, construction, automotive parts, and household appliances. To produce these products with the desired service lifetimes the use of suitable stabilizers is necessary. This book provides a concise and comprehensive overview of the basic mechanisms of plastic degradation processes caused by heat and light. At its core is a detailed description of the stabilization of different polymers, including an explanation of stabilization mechanisms and the influence of commonly used additives such as fillers, flame retardents and pigments on the stability of plastic. Every polymer scientist, material technologist, or application engineer dealing with the design of the properties of plastics will benefit from this new overview.
Download or read book Polymer Additives in Stabilisation written by and published by . This book was released on 1988 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Polymer Degradation 7 written by N. Grassie and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this volume, like that of its predecessors in the series, is to present a selection of topics which are representative of the continually expanding area of polymer degradation. It will be obvious that some of these topics emanate from academic studies, others from more applied backgrounds, but it is anticipated that all will be seen to be of vital relevance to one or other of the currently advancing fields of polymer technology. The first two chapters deal with specific classes of polymers, and particularly with their mechanisms and products of thermal degrada tion. Thus in Chapter 1 Dr McNeill discusses the reactions of the ammonium, alkali and alkaline earth metal salts of poly(methacrylic acid) and their copolymers with methyl methacrylate. These water soluble 'ionomers' have valuable technological applications. In Chap ter 2 Professor Montaudo and Dr Puglisi perform a valuable service by drawing together and critically reviewing, for the first time to my knowledge, the mechanisms of thermal degradation of the various classes of condensation polymers which are of industrial significance. This includes, for example, the polyurethanes, polyureas, polyesters, polycarbonates, polyamides, polyimides, polyethers, polysulphides, polysulphones, polyschiff bases, polysiloxanes and polyphosphazenes.
Download or read book Polymer Additives in Stabilisation written by Norman Grassie and published by . This book was released on 1988 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Degradation and Stabilisation of Polyolefins written by Norman S. Allen and published by . This book was released on 1983 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics Additives written by G. Pritchard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.
