Download or read book Mechanics of Microstructured Solids written by J.-F. Ganghoffer and published by Springer Science & Business Media. This book was released on 2009-05-14 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a compendium of reviewed articles presented at the 11th EUROMECH-MECAMAT conference entitled, "Mechancis of microstructured solids: cellular materials, fibre reinforced solids and soft tissues." It provides all the latest information in the field.
Download or read book Mechanics of Microstructured Solids 2 written by J.-F. Ganghoffer and published by Springer Science & Business Media. This book was released on 2009-12-02 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume of the series Lecture Notes in Applied and Computational Mechanics is the second part of the compendium of reviewed articles presented at the 11th EUROMECH-MECAMAT conference entitled "Mechanics of microstructured solids: cellular materials, fibre reinforced solids and soft tissues", which took place in Torino (Italy) in March 10-14, 2008, at the Museo Regional delle Scienze. This EUROMECH-MECAMAT conference was jointly organized by the Dipartimento di Matematica dell'Università di Torino, Italy and the INPL Institute (LEMTA, Nancy-Université, France). Prof. Franco Pastrone and Prof. Jean-François Ganghoffer were the co-chairmen.
Download or read book Mechanics of Microstructured Solids written by J.-F. Ganghoffer and published by Springer. This book was released on 2009-04-27 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a compendium of reviewed articles presented at the 11th EUROMECH-MECAMAT conference entitled, "Mechancis of microstructured solids: cellular materials, fibre reinforced solids and soft tissues." It provides all the latest information in the field.
Download or read book Mechanics of Microstructured Solids 2 written by J.-F. Ganghoffer and published by Springer. This book was released on 2010-05-06 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume of the series Lecture Notes in Applied and Computational Mechanics is the second part of the compendium of reviewed articles presented at the 11th EUROMECH-MECAMAT conference entitled "Mechanics of microstructured solids: cellular materials, fibre reinforced solids and soft tissues", which took place in Torino (Italy) in March 10-14, 2008, at the Museo Regional delle Scienze. This EUROMECH-MECAMAT conference was jointly organized by the Dipartimento di Matematica dell'Università di Torino, Italy and the INPL Institute (LEMTA, Nancy-Université, France). Prof. Franco Pastrone and Prof. Jean-François Ganghoffer were the co-chairmen.
Download or read book Mechanics of Microstructured Materials written by Helmut J. Böhm and published by Springer. This book was released on 2014-05-04 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work deals with the thermomechanical mechanical behavior of microstructured materials, which has attracted considerable interest from both the academic and the industrial research communities. The past decade has witnessed major progress in the development of analytical as well as numerical modeling approaches and of experimental methods in this field. Considerable research efforts have been aimed at obtaining microstructure-property correlations and at studying the damage and failure behavior of microstructured materials. The book combines an overview of important analytical and numerical modeling approaches in continuum micromechanics and is aimed at academic and industrial researchers, such as materials scientists, mechanical engineers, and applied physicists, who are working or planning to work in the field of mechanics of microstructured materials such as composites, metals and ceramics.
Download or read book Mechanics of Microstructured Solids 2 written by J.-F. Ganghoffer and published by Springer. This book was released on 2010-02-04 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume of the series Lecture Notes in Applied and Computational Mechanics is the second part of the compendium of reviewed articles presented at the 11th EUROMECH-MECAMAT conference entitled "Mechanics of microstructured solids: cellular materials, fibre reinforced solids and soft tissues", which took place in Torino (Italy) in March 10-14, 2008, at the Museo Regional delle Scienze. This EUROMECH-MECAMAT conference was jointly organized by the Dipartimento di Matematica dell'Università di Torino, Italy and the INPL Institute (LEMTA, Nancy-Université, France). Prof. Franco Pastrone and Prof. Jean-François Ganghoffer were the co-chairmen.
Download or read book Micromechanics of Defects in Solids written by T. Mura and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book stems from a course on Micromechanics that I started about fifteen years ago at Northwestern University. At that time, micromechanics was a rather unfamiliar subject. Although I repeated the course every year, I was never convinced that my notes have quite developed into a final manuscript because new topics emerged constantly requiring revisions, and additions. I finally came to realize that if this is continued, then I will never complete the book to my total satisfaction. Meanwhile, T. Mori and I had coauthored a book in Japanese, entitled Micromechanics, published by Baifu-kan, Tokyo, in 1975. It received an extremely favorable response from students and re searchers in Japan. This encouraged me to go ahead and publish my course notes in their latest version, as this book, which contains further development of the subject and is more comprehensive than the one published in Japanese. Micromechanics encompasses mechanics related to microstructures of materials. The method employed is a continuum theory of elasticity yet its applications cover a broad area relating to the mechanical behavior of materi als: plasticity, fracture and fatigue, constitutive equations, composite materi als, polycrystals, etc. These subjects are treated in this book by means of a powerful and unified method which is called the 'eigenstrain method. ' In particular, problems relating to inclusions and dislocations are most effectively analyzed by this method, and therefore, special emphasis is placed on these topics.
Download or read book Mechanics of Microstructured Materials written by Helmut J. Böhm and published by Springer. This book was released on 2005-01-12 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work deals with the thermomechanical mechanical behavior of microstructured materials, which has attracted considerable interest from both the academic and the industrial research communities. The past decade has witnessed major progress in the development of analytical as well as numerical modeling approaches and of experimental methods in this field. Considerable research efforts have been aimed at obtaining microstructure-property correlations and at studying the damage and failure behavior of microstructured materials. The book combines an overview of important analytical and numerical modeling approaches in continuum micromechanics and is aimed at academic and industrial researchers, such as materials scientists, mechanical engineers, and applied physicists, who are working or planning to work in the field of mechanics of microstructured materials such as composites, metals and ceramics.
Download or read book Mechanics of Microstructured Materials written by Helmut J. Böhm and published by . This book was released on 2004 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics and Physics of Solids at Micro and Nano Scales written by Ioan R. Ionescu and published by John Wiley & Sons. This book was released on 2020-02-26 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chronicling the 11th US–France Mechanics and physics of solids at macro- and nano-scales symposium, organized by ICACM (International Center for Applied Computational Mechanics) in Paris, June 2018, this book addresses the breadth of issues raised. It covers a comprehensive range of scientific and technological topics (from elementary plastic events in metals and materials in harsh environments to bio-engineered and bio-mimicking materials), offering a representative perspective on state-of-the-art research and materials. Expounding on the issues related to mesoscale modeling, the first part of the book addresses the representation of plastic deformation at both extremes of the scale – between nano- and macro- levels. The second half of the book examines the mechanics and physics of soft materials, polymers and materials made from fibers or molecular networks.
Download or read book Linear and Nonlinear Waves in Microstructured Solids written by Igor V. Andrianov and published by CRC Press. This book was released on 2021-04-22 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book uses asymptotic methods to obtain simple approximate analytic solutions to various problems within mechanics, notably wave processes in heterogeneous materials. Presenting original solutions to common issues within mechanics, this book builds upon years of research to demonstrate the benefits of implementing asymptotic techniques within mechanical engineering and material science. Focusing on linear and nonlinear wave phenomena in complex micro-structured solids, the book determines their global characteristics through analysis of their internal structure, using homogenization and asymptotic procedures, in line with the latest thinking within the field. The book’s cutting-edge methodology can be applied to optimal design, non-destructive control and in deep seismic sounding, providing a valuable alternative to widely used numerical methods. Using case studies, the book covers topics such as elastic waves in nonhomogeneous materials, regular and chaotic dynamics based on continualisation and discretization and vibration localization in 1D Linear and Nonlinear lattices. The book will be of interest to students, research engineers, and professionals specialising in mathematics and physics as well as mechanical and civil engineering.
Download or read book Advances in Mechanics of Microstructured Media and Structures written by Francesco dell'Isola and published by Springer. This book was released on 2018-02-27 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an homage to the pioneering works of E. Aero and G. Maugin in the area of analytical description of generalized continua. It presents a collection of contributions on micropolar, micromorphic and strain gradient media, media with internal variables, metamaterials, beam lattices, liquid crystals, and others. The main focus is on wave propagation, stability problems, homogenization, and relations between discrete and continuous models.
Download or read book Microstructural Randomness and Scaling in Mechanics of Materials written by Martin Ostoja-Starzewski and published by CRC Press. This book was released on 2007-08-13 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: An area at the intersection of solid mechanics, materials science, and stochastic mathematics, mechanics of materials often necessitates a stochastic approach to grasp the effects of spatial randomness. Using this approach, Microstructural Randomness and Scaling in Mechanics of Materials explores numerous stochastic models and methods used in the m
Download or read book Wave Dynamics and Composite Mechanics for Microstructured Materials and Metamaterials written by Mezhlum A. Sumbatyan and published by Springer. This book was released on 2017-03-28 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with topical problems concerning technology and design in construction of modern metamaterials. The authors construct the models of mechanical, electromechanical and acoustical behavior of the metamaterials, which are founded upon mechanisms existing on micro-level in interaction of elementary structures of the material. The empiric observations on the phenomenological level are used to test the created models. The book provides solutions, based on fundamental methods and models using the theory of wave propagation, nonlinear theories and composite mechanics for media with micro- and nanostructure. They include the models containing arrays of cracks, defects, with presence of micro- and nanosize piezoelectric elements and coupled physical-mechanical fields of different nature. The investigations show that the analytical, numerical and experimental methods permit evaluation of the qualitative and quantitative properties of the materials of this sort, with diagnosis of their effective characteristics, frequency intervals of effective energetic cutting and passing, as well as effective regimes of damage evaluation by the acoustic methods.
Download or read book Micromechanics of defects in solids written by Toshio Mura and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sterns from a course on Micromechanics that I started about fifteen years ago at Northwestern University. At that time, micro mechanics was a rather unfamiliar subject. Although I repeated the course every year, I was ne ver convinced that my notes have quite developed into a final manuscript because new topics emerged con stantly requiring revisions, and additions. I finally came to realize that if this is continued, then I will never complete the book to my total satisfaction. Meanwhile, T. Mori and I had coauthored a book in Micromechanics, published by Baifu-kan, Tokyo, in Japanese, entitled 1975. It received an extremely favorable response from students and researchers in Japan. This encouraged me to go ahead and publish my course notes in their latest version, as this book, which contains further development of the subject and is more comprehensive than the one published in Japanese. Micromechanics encompasses mechanics related to microstructures of materials. The method employed is a continuum theory of elasticity yet its applications cover a broad area relating to the mechanical behavior of materials: plasticity, fracture and fatigue, constitutive equa tions, composite materials, polycrystals, etc. These subjects are treated in this book by means of a powerful and unified method which is called the 'eigenstrain method. ' In particular, problems relating to inclusions and dislocations are most effectively analyzed by this method, and therefore, special emphasis is placed on these topics.
Download or read book Mechanics of Composite Materials written by Jacob Aboudi and published by Elsevier. This book was released on 2013-10-22 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade the author has been engaged in developing a micromechanical composite model based on the study of interacting periodic cells. In this two-phase model, the inclusion is assumed to occupy a single cell whereas the matrix material occupies several surrounding cells. A prominent feature of the micromechanical method of cells is the transition from a medium, with a periodic microstructure to an equivalent homogeneous continuum which effectively represents the composite material. Of great importance is the significant advantage of the cells model in its capability to analyze elastic as well as nonelastic constituents (e.g. viscoelastic, elastoplastic and nonlinear elastic), thus forming a unified approach in the prediction of the overall behaviour of composite material. This book deals almost exclusively with this unified theory and its various applications.
Download or read book Micromechanics and Nanomechanics of Composite Solids written by Shaker A. Meguid and published by Springer. This book was released on 2017-07-19 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book elucidates the most recent and highly original developments in the fields of micro- and nanomechanics and the corresponding homogenization techniques that can be reliably adopted and applied in determining the local properties, as well as the linear and nonlinear effective properties of the final architecture of these complex composite structures. Specifically, this volume, divided into three main sections—Fundamentals, Modeling, and Applications—provides recent developments in the mathematical framework of micro- and nanomechanics, including Green’s function and Eshelby’s inclusion problem, molecular mechanics, molecular dynamics, atomistic based continuum, multiscale modeling, and highly localized phenomena such as microcracks and plasticity. It is a compilation of the most recent efforts by a group of the world’s most talented and respected researchers. Ideal for graduate students in aerospace, mechanical, civil, material science, life sciences, and biomedical engineering, researchers, practicing engineers, and consultants, the book provides a unified approach in compiling micro- and nano-scale phenomena. · Elucidates recent and highly original developments in the fields of micromechanics and nanomechanics and the corresponding homogenization techniques; · Includes several new topics that are not covered in the current literature, such as micromechanics of metamaterials, electrical conductivity of CNT and graphene nanocomposites, ferroelectrics, piezoelectric, and electromagnetic materials; · Addresses highly localized phenomena such as coupled field problems, microcracks, inelasticity, dispersion of CNTs, synthesis, characterization and a number of interesting applications; · Maximizes readers’ ability to apply theories of micromechanics and nanomechanics to heterogeneous solids; · Illustrates application of micro- and nanomechanical theory to design novel composite and nanocomposite materials.
